Dell Precision 390, processors who work for an upgrade?

Similar Questions

• After a clean install which drivers do need me for a Dell Precision 390

  I'm going to do a clean install with Windows XP Pro on a Dell Precision 390 what are the bare essential drivers, I'll need for the machine to work properly, and where can I get them? Thank you!

  Hello Michael,

  After Reinstalling windows, make sure you install the drivers in the correct order. It is very important for the computer to function properly. Please click here to get the drivers for Dell Precision 390.

  I hope this helps!

• Dell Precision 390 and Windows 7 64 bit driver support

  We have a Dell Precision 390 and want to pass this to a Windows 7 64-bit operating system.  Several months ago, I noticed driver support for Windows 7 64-bit for the Dell Precision 390 model but pilot at the moment the site and downloads not support all these drivers for Windows 7.  It seems that the support has been removed.  At best, it supports only Windows Vista 64-bit.  Can someone explain why there is no support driver for Dell Precision 390 for the 64-bit Windows 7 platform?

  Tony

  I have a Dell Precision 390 and Windows 7 Ultimate 64 - bit loaded just fine and it is running.

  It is strongly suggested that you do a clean install.

  So I wiped my HD (after backing up personal files). Don't come to format your drive, I mean totally wipe it.

  Automatic updates will install the drivers you need for any connected device or visit the manufacturers for your drivers.

  So in short, "Don't sweat it".

  Go ahead and download this puppy goes for a few years.

• Dell Precision 390 doesn't start with Bios pin in Place

  I recently acquired my nieces computer Dell Precision 390 and was trying to upgrade to Windows 7. When I opened upward, I noticed that the pin of the Bios was only placed on one of the pins instead of two of them as shown in the maintenance manual.

  After the replacement of the Bios pin on the appropriate setting, the computer will not start and has no effect when you press the Start button.

  I replaced the pin of the Bios to the place where I found it originally, and the end started computer. What gives here? Why didn't he start if I place the PIN Bios exactly where it is supposed to be?

  Does anyone have answers or suggestions? Thank you!

  His work EXACTLY as designed.
  

  Clear CMOS/NVRAM memory; 390

  By rider:

  The computer must be disconnected from the power outlet to clear the CMOS setting.

  Remove the cover from the computer.
  Locate the RTCRST jumper on the system board.
  Remove the CAP from the single-axis and onto the two pins and wait 3-5 seconds.
  Replace the cap on the single PIN.
  Replace the computer cover.
  Plug the computer and peripherals to their electrical outlets and turn them on.

• AirPrint is not working since 9.3.1 what airprint update - not found.  tried the suggestion of JimHdk, who worked for a single document. any suggestions

  AirPrint is not working since 9.3.1 what airprint update - not found.  tried the suggestion of JimHdk, who worked for a single document. any suggestions

  Since we do not know what may have suggested to Jim, power cycle your router and the printer and force restart the iPad. Unplug the router and the printer power for 30 seconds. Plug in the router first and let it restart. And then reconnect the printer power supply. Then force restart the iPad. To force the reboot your device, press and hold the two buttons of sleep/wake and home for at least ten seconds, until you see the Apple logo.

• How can I create a site of AIF who works for mobile clients instead of use available phone of muse

  How can I create a layout of alternative office who works for mobile clients instead of use available phone of muse. Available phone simply doesn't work very well for me and my office layout works great on mobile devices with the exception of a few aesthetic problems. It would be much faster for me to fix these problems, he would to create a brand new mobile site.

  Thank you for your help

  Is there no created phone available in the same site then telephones will load office layout by default, so you don't have to create an office layout separately for the mobile version.

  If I'm missing something here, please let me know.

  Thank you

  Sanjit

• Dell Precision T3500 doesn't work and fans of becomes strong :(

  Hello

  My Dell Precision T3500 work not at all,

  When I run it, the CPU and the GPU fan fan becomes abnormally strong

  And nothing happens on the screen

  And I have this error (3-4) on the front of my case code
  in the user manual, this represents a failure of memory
  

  but I checked all components
  RAM-power - GPU - CPU
  It's all the worknig on my other computer Dell Precision

  I need help :(!

  If the memory is good, and the processor is good, after having tested on another machine, your motherboard needs to be replaced.  Part of the problem may be the processor slot or maybe it's the memory slot (because the first location NEEDS to be filled, it does not matter if the first location is only bad or if they all failed at the same time - if one does not work, no one else can be used)... whatever it is, the only difficulty you a new motherboard.

  If you cannot start your system, you can't Flash your BIOS.

  One last thing, you might try... Remove ALL (readers, cards, extension, mouse, keyboard, etc) the system except for the processor and a barrette of memory in the first place.

  Try another "last" thing... clear BIOS/memory NVRAM.  If there are no jumpers on the motherboard, and then disconnect the system, remove the battery, hold the power button for about 10 seconds, replace the battery, plug in and turn on.

• Card PCI-6259 is compatible with the Dell Precision 390?

  Hi all

  I need help in answering this question.  I want to buy a better computer for my data PCI-6259 acquisition card.  I tried to search to see if the card is compatible with the PC and there's previous numbers with this set-up before other users.  Do you have a link to the list of the DAQ cards with tested PC configurations?  I want to just make sure that when I buy the computer, everything will work without problem because I only have one shot at this.

  Thanks to all in advance.

  Kind regards

  justdomechanicalengineering

  Hello

  We do not have a link to specific DAQ board/PC pairings, but the specifications for the Dell Precision 360 indicate that she has three ports PCI 5V which must be compatible with your PCI-6259.

  Best,

  Dan Nelson

  Technical sales engineer

• Audio guide for streets & trips 2006 does not work for Vista. (Who worked for XP)

  Guide audio of streets & trips 2006 worked for xp.  new laptop w/vista.  does not work now.

  http://www.Microsoft.com/communities/newsgroups/en-us/default.aspx?DG=Microsoft.public.streets-trips

  Discussions in Streets and Trips

  In addition to the info below, try the Streests and travel above Newsgroup.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

  Windows Vista Compatibility Center

  First thing to do is to check its Vista compatibility at the link above, and if not to see what patches/solutions are available from its manufacturer...

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

  If this is not Vista compatible, read the info on the link above.
  It works for some programs, but not all.

  This applies to software programs, NOT hardware drivers.

  If it's Vista compatible > uninstall it > Re-download/save to your desktop > right click on setup.exe O run as admin.

  See you soon.

  Mick Murphy - Microsoft partner

• System Migration Assistant work for the upgrade to Win7 for Win8?

  Hi all

  I couldn't find the answer to the question "System Migration Assistant will work for win7 for Win8?" anywhere. If anyone has some knowledge of what would be great, thanks!

  Sample check list:

  https://www.dropbox.com/s/4l3n8xytbcnmi2l/sample%20disaster%20recovery.txt

• Windows family vfista premium is broken, but not the dell printer. products do not work for three months windows

  I have installed windows securitity, now three months of windows products don't work, it's time I'm asking for help, I lost the mail, internet, do not download, made-it is not working it's time I am asking for help, I lost the mail, internet, do not download, made-it doesn't work nor does she Live Gallery windows, it will not udate. the entire system is ruined, had to use incredimale and foxfire, re-installed Pack2, now it of really a mess, had too use sysytem restore dell, now say that dell drive hard has problems, spending 6 weeks with lasy tech, lost everything, so now what?

  proven system repair, nothing, tried to reinstall, he left 90 percent of the old stuff still there, I can't get downloads, patches, nothing that is microsoft works.

  I have to clean the machine and get 7, will operate 7 or have the same problems? I was usig stinger, ad-aware and spybot just to clean the machince, and I always get more trogens then Troy! husband uses a gateway on the same router, never spent a McAffee and a has no problem, every day it's something new, when it downloads, it said: it is the missing pieces and will not work.

  This is the third time I have tried to save my stuff to say-connected usb, hard drives, seven is better, the disk of vista that I messed up? It worked fine until I used the basics of microsoft.

  Thanks, I'll check some of your links, I was up all night with Dell, they did all the tests imaginable and agreed it was the vista software and not a virus or malware, they also checked with their people for the compatibility problems with windos 7, since this is the third time I would be re - install it and I went to buy windows 7 , he already has accompanied me throughout the entire upward and the account if I need help or advice, he will be free.

  So tonight I'm going only to remove my sweet that I bought or have the disc, then personal stuff like photos etc and I will do a clean install. I also had a new manual of windows 7 from microsoft for reference, thanks for the time, effort and helps you offered, some of these links might help me as I install it.

  Once again thnak you.

  Which

• My old reliable 16 bit BACK interpreted (and not compiled) program, an add-on for Angoss Smartware, who worked for years in XP has stopped working

  I have a spreadsheet, database, wordprocess modules DOS base program and that it is a programming language with which I programmed an accounting software package among other things. In recent weeks it does not my code. One machine said parity memory error and stops, another machine said variable file does not. I can load my original spreadsheet and database of the 16 bit BACK exe files but not inside my code 'interpreted '. The actual data and spreadsheets, loading files and can be changed. I tried to recompile from source code that I wrote and Windows no longer allows that. The software name is Smartware II and executable is angossx.exe if anyone is familiar with it.

  This program worked from a file of DOS commands, with a pif associated with the executable file and the autoexec and config files in windows\system32 for many year starting with Windows31...

  I suspect a recent update of security in Windows caused my code to look like rogue code. Anyone have any ideas on a solution?

  Hi aurelienbazin,

  Thanks for posting in the Microsoft Community. The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  http://social.technet.Microsoft.com/forums/en-us/itproxpsp/threads

  Hope the helps of information. If you need help, please answer that we will be happy to help you.

• This processor will work as an upgrade for my dvy-1175nr?

  Can I use this as an upgrade for my processor?

  What is the currently installed processor?

  The answer is Yes.

  The following processors are compatible with the motherboard of your laptop. reference source

  Intel Core™ 2 Duo T9600 2.80 GHz with
  6 MB of L2 cache and 1066 MHz front
  Bus (FSB)
   
  Intel Core 2 Duo T9400 2.53 GHz with 6-
  MB of cache L2 and FSB 1066 MHz
   
  Intel Core Duo T8600 2.40 GHz with 3-
  MB of cache L2 and FSB 1066 MHz
   
  Intel Core Duo T8400 2.26 GHz with 3-
  MB of cache L2 and FSB 1066 MHz

• Reference Dell LR 6 does not work for Windows 10

  Is there a problem with Dell computers using the new 10 Windows and download of CC of LR 6? I can only download LR 5.

  Hi storytellerdoll,

  Please check the OS version you have on your Dell computer, if its 32 bits, so won't it able to install Lightroom 6 thereon.

  If its 64 bit OS, then refer the link for download Lightroom 6: Install Photoshop Lightroom

  Hope that helps.

  Kind regards

  ~ Mohit

• Commit does not work on SQL (but who works for the icon)

  I can't understand it. When I write a script I do not get one commit even if in the result of the statement, it says "engaged." However with the same sql so I get out the commit and just execute the statement and then use the validation icon it works. For example, this will not sql commit
  
  delete
  Of
  Test_Table
  Where user_id = 'abc123 ';
  commit;
  
  But if I run it like this and click the validation for this:
  
  delete
  Of
  Test_Table
  When user_id = "abc123".
  
  Any info much frequented

  How do you run it? If you use F9 (or the green arrow), it runs only a single statement.
  If you use F5 (or the green arrow with a piece of paper behind it), it will run the entire worksheet (or the selected area) as a script.

  If both statements are running, you should see

  x deleted rows.
  Validation succeeded.