Dell Precision 390 and Windows 7 64 bit driver support

Similar Questions

• Dell Precision m6600 and Windows 10

  Y at - there no confirmation of anyone who Windows 10 works on Precision Mobile Workstation M6600?

  There is no drivers for Windows 8.1 and I never managed to make it work properly with Windows 8.1. VMWare Workstation would crash, blue screens, etc. This is because there is no drivers for this model of Dell for Windows 8.1 released.    But will it be the same story with Windows 10?

  I can confirm that Windows 10 works on the M6600. I just upgraded my M6600 and Windows 10 in fact improved some drivers and improved my way of computer work.

  From the moment I bought my Logitech H800 headset, I couldn't match directly with the laptop through Bluetooth. The USB receiver was still necessary. As soon as I have upgraded to Windows 10 my H800 has been recognized and immediately connected!

  There are two small problems that scared me at first. WIFI or Bluetooth worked immediately after the upgrade to Windows 10. I don't know why this happened but I am simply gone network adapters and disabled, then reactivated each of them. After reactivated the WIFI started working with Bluetooth

• Windows 8 and Windows 7 64-bit drive Possible? laptop

  Well, unfortunately, I downloaded windows 8 and not knowing that I completely itself installed on my previous operating system. (Win7 Home Premium) I lost the disk I got with my laptop so I can not re - install windows 7 and see how I thought it was unfair for me to spend another 100 euros or so on it I was wondering if I could get possibly another windows 7 disc sent to me. I think it would be better if a member of the staff of hp itself could answer my question.

  Thank you

  Hello:

  Nobody works for HP will answer your request on this forum in an official capacity.

  You can buy a recovery for your PC disk by reading the info on the link below.

  http://support.HP.com/us-en/document/c00810334

  Otherwise, I have a solution that is better than nothing if you don't want to order recovery disks.

  Download the ISO file of the version of Windows 7 that is located on the COA Microsoft sticker on the bottom of your PC. There are also the version in the language of your original operating system to PC provided with.

  For example, if your tile is windows 7 Home premium and that the language was Danish, select Download 32 or 64-bit windows 7 Home premium - Danish file.

  Burn the file to a DVD using a program that can burn ISO files so that you can boot from the DVD.

  Install Windows 7. Then use the product key 25 character on the sticker COST microsoft on the bottom of your PC to activate the installation.

  Then pass it the HP support and the driver page for your laptop and install all the drivers you need.

  Link for downloads of W7 is below.

  http://www.mydigitallife.info/official-Windows-7-SP1-ISO-from-Digital-River/

  Paul

• Dell Precision 390 doesn't start with Bios pin in Place

  I recently acquired my nieces computer Dell Precision 390 and was trying to upgrade to Windows 7. When I opened upward, I noticed that the pin of the Bios was only placed on one of the pins instead of two of them as shown in the maintenance manual.

  After the replacement of the Bios pin on the appropriate setting, the computer will not start and has no effect when you press the Start button.

  I replaced the pin of the Bios to the place where I found it originally, and the end started computer. What gives here? Why didn't he start if I place the PIN Bios exactly where it is supposed to be?

  Does anyone have answers or suggestions? Thank you!

  His work EXACTLY as designed.
  

  Clear CMOS/NVRAM memory; 390

  By rider:

  The computer must be disconnected from the power outlet to clear the CMOS setting.

  Remove the cover from the computer.
  Locate the RTCRST jumper on the system board.
  Remove the CAP from the single-axis and onto the two pins and wait 3-5 seconds.
  Replace the cap on the single PIN.
  Replace the computer cover.
  Plug the computer and peripherals to their electrical outlets and turn them on.

• I have re installed the operating system on my Dell Studio 15 for Windows Vista 32-bit. But now the network controller is not working and I can't use wireless internet

  I have re installed the operating system on my Dell Studio 15 for Windows Vista 32-bit.  But now the network controller is not working and I can't use wireless internet, but I can plug a cable ethernet in there and get online.  What can I do?

  I have reinstalled the operating system on my Dell Studio 15 for Windows Vista 32-bit.  But now the network controller is not working and I can't use wireless internet, but I can plug a cable ethernet in there and get online.  What can I do?

  Install the appropriate network device drivers and software from the Dell downloads web site for your particular model, or better yet, tag Service...

• Adaptec AHA-2940UW card prevents POST and boot 400SC, Precision 390 and Power Edge

  I have two systems: Precision 390 and Power Edge 400SC

  When an Adaptec 2940UW adapter is installed in a machine, they will not start.  Power lights, but there is no video output, the system just hangs.  In the case of the 390, the fan slowly ramps up to its maximum speed.

  I know the SCSI drive and the cable is good and well done.  I tried different machines slot, disabled the startup of the IDE/SATA drives, disable the option "fast boot".  The results are always the same - both computers refuse to do the BIOS POST when the adapter is installed.

  My first is that the adapter is bad, but the eBay seller insists he test it and it worked.

  Anyone have an experience to install a SCSI card in a Dell computer with integrated IDE/SATA controller?

  The 2940UW is a 5v PCI 2.0 card.

  You can use only the 2 cards of keyway UNIVERSAL PCI 2.2 or 2.3 which are 3.3V to the Pentium 4 and systems.  Mounting in the slot is NOT compatibility.  All slots MODERN 64-BIT PCI - X are also 3.3V only.

  If you need this card, you will need to use a 2940U2W which has 2 SLOTS, which means that its 3.3V OR 5V UNIVERSAL

  UEFI WINDOWS 8 systems will prevent this loading card or be seen in secure boot mode.  64-BIT VERSIONS of windows must also be certified by Microsoft WHQL drivers or that they will not load.

  http://www.Adaptec.com/en-us/support/SCSI/Ultra2/AHA-2940U2W/

  

  

• After a clean install which drivers do need me for a Dell Precision 390

  I'm going to do a clean install with Windows XP Pro on a Dell Precision 390 what are the bare essential drivers, I'll need for the machine to work properly, and where can I get them? Thank you!

  Hello Michael,

  After Reinstalling windows, make sure you install the drivers in the correct order. It is very important for the computer to function properly. Please click here to get the drivers for Dell Precision 390.

  I hope this helps!

• Dell Precision 390, processors who work for an upgrade?

  We have two Dell Precision 390. One with the Conroe E6300 and one with the Pentium 4 631, variety of Cedar Mill.

  We want to upgrade the P4 to something better.

  We have a lying here Q6600 processor, and an old Pentium D 830 dual core CPU, but it's be better performer than one heart P4.

  Are the same motherboards in these two 390 s? I think that our E6300 could be improved to a Q6600, but the 390 with the P4, I'm not sure. They are all two socket 775. We already have the necessary correct heatpipe radiator for more hot processors.

  Thank you

  I got the info from Dell today. There are two motherboards used in the 390. We support the line Cedar Mill and Conroe CPU. The other motherboard for 390 supports the Q6600, QX6700 and QX6800.

• My laptop Dell Inspiron N5110 using Windows 7 64 bit. Cannot find a driver for my Bluetooth peripheral device

  My laptop Dell Inspiron N5110 using Windows 7 64 bit. In Device Manager, I found two items with a trademark right Exclaimation beside 'Devices Bluetooth device' in the other devices section. Properties, I found that these two elements with problem are found on "Microsoft Bluetooth enumerator.  I tried to run Windows update to get the driver but it says no update available. And I can't find this driver online. Can someone help me solve this problem? Thank you very much

  And you have tried the drivers supplied by the center of network from this link?

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?c=us&docid=545832&doclang=en&l=en&s=Gen&cs=

  It is a path to the bottom of the page under network.

• Where can I download the latest version of the Apple support for boot camp and Windows-10 64-bit software?

  Where can I download the latest version of the Apple support for boot camp and Windows-10 64-bit software?

  give me the link?

  I need the latest package driver.

  -Thank you

  Please use BC Assistant.

  

• I have win 98se, win xp sp3 and Windows vista 64 bit, I want to share printer files

  I have win 98se, win xp sp3 and Windows vista 64-bit PCs, and I want to share files & printer... printer is connect in xp or 98se, well, what is possible... currently, I've got these between vista and xp, which is available when win 98se involved?

  Two ways are participatory computers in a windows environment, a working group and a _.   You can fill in the blank?

  Virtual private networks have little to do with the domains or working groups.

  I don't think that WIndows 98 can join to a domain.  All versions of WIndows, you mention should be able to participate in a working group, however.

  In my opinion, the best way to share a printer is to use a printer connected to the network

• Is it possible to run Windows 7 * 32-bit and Windows 7 * 64-bit on the same computer?

  I have Windows 7 * 32 bit running in my computer. But a lot of games that is built on 64-bit do not work in my system. I tried to install Windows 7 * 64 Bit on another partition of my computer. But before the start of the system using the Windows 7 installation DVD, I get an error with the oxc00000e9 status. The info says: unexpected i/o error has occurred.

  My question is whether it can run Windows 7 * 32-bit and Windows 7 * 64-bit on the same computer. If so, how to install the Windows 7 * 64-Bit? Thank you.

  Yes, you can, but you will need to have a permit for it if you plan to have both on the same computer.

  the key that can be used with 32-bit or 64-bit Windows 7 is designed to drive 1. You cannot use install both. 1 license, 1 installation, so choose wisely. If you want to install Windows 7 32 or 64 bit on another partition or another computer, you must purchase an additional license.

  INSTALLATION AND USE RIGHTS.

  a. one copy per computer. You can install one copy of the software on a single computer. This computer is "licensed computer.

  b. a computer license. You can use the software on up to two processors of the computer under license at some point. Except as provided in these license terms, you cannot use the software on any other computer.

  c. number of users. Except as provided in these license terms, only one user may use the software at a time.

  d. other Versions. The software may include several versions, such as 32-bit and 64-bit. You may install and use only one version at a time.

  Resources:

  Please see the following article with useful information about dual-boot:

  http://Windows.Microsoft.com/en-us/Windows7/can-I-have-more-than-one-operating-system-on-my-computer-multiboot

• I have windows server 2008 R2 and windows 7 32 bit on the same network. But I couldn't see the server on the network.

  I have a windows server 2008 r2 server and windows 7 32 bit on the same network.

  I couldn't see the server on the network and

  also I could not access the workstation to the server.

  not more than one device must perform NAT

  Hi Bruce,.

  Given that you are working on Windows server 2008 R2, please post your question here:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• Windows PowerShell 3.0 and Windows 7 [64 - Bit (x 64), {System32} and 32 - bit (x 86), {SysWOW64}] O.S.:

  Windows PowerShell 3.0 and Windows 7 [64 - Bit (x 64), {System32} and 32 - bit (x 86), {SysWOW64}] O.S.:

  (Originally titled: "Windows PowerShell 3.0:")

  1. run "C:\windows\System32\WindowsPowerShell\v1.0\powershell_ise.exe" is the title "Windows PowerShell ISE" which should be the 32-bit version;

  AND,

  2. run "C:\windows\sysWOW64\WindowsPowerShell\v1.0\powershell_ise.exe" has the title "Windows PowerShell ISE (x 86)" which should be 64-bit.

  BUT,

  3 does not (x 86) (x 64) and stand 32-bit for the 64-bit versions of programs?

  AND,

  4 menu of program "help" or "Windows PowerShell ISE" has an article "about".

  THUS,.

  5. Why are the titles indicating no 32/64-bit version correctly?

  AND,

  6. what version of bits of programs "Windows PowerShell ISE" am really run when I run 1 or 2 above?

  JPD

  Have a read of http://technet.microsoft.com/en-us/library/hh847733.aspx and http://technet.microsoft.com/en-us/library/hh847820.aspx and http://www.samlogic.net/articles/32-64-bit-windows-folder-x86-syswow64.htm I hope this can help. (assuming I've understood your question).

  Basically, the "System32" folder is for 64-bit files and the "SysWOW64" folder is for 32-bit files

• I have lenovo g560 laptop and Windows 7 64 bit, but my laptop computer webcam does not tell me how to use it

  I have lenovo g560 laptop and Windows 7 64 bit, but my laptop computer webcam does not tell me how to use it

  Help/support on the Lenovo support site or their forums, review its their webcam and so does not part of win7