Dell Precision M4700 (Windows 7 pro) starts not once configured with UEFI and Secure Boot
To all those who can help you:
I got a Dell Precision M4700 and I update bios A05. I was intending to move to Windows 8. Everything was fine and the bios update was successful. I started the new bios under Windows 7 Professional (base OS) factory-installed and was very good.
However, I can't get into the bios (not even see the POST from Dell or Logo) after I activate the UEFI and Secure Boot.This before I update to Windows 8 Pro. Now I'm stuck with a blank screen (same LCD not lit) and nothing to start. It's like a dead PC.
Help, please. Is that what I can do or should I contact Dell Support for repair?
Thank you
I fixed it! Just removed the CMOS battery, the BIOS got reset back to factory default. So I did:
(1) remove the battery
(2) press the power button to the case of ground
(3) remove the lower panel
(4) disconnect the CMOS battery (it's tedious)
(5) I hit the power button for some time (30 s) to clear the capacitors or something else, it was my theory, but I doubt it's necessary
(6) use it to all back to the start
When I turned it on it turns on and turns off several times before finally stay standing and I was then able to enter the BIOS and all the settings have been restored to factory default. I am new to Windows 7 on my machine so I'll repeat the process, this time without disabling the legacy option roms!
Here is the disassembly for precision M6700 and M4700 instruction manual if anyone needs:
http://support.euro.Dell.com/support/eDOCS/systems/wsm6700/en/OM/om_en.PDF
http://support.Dell.com/support/eDOCS/systems/wsm4700/en/OM/om_en.PDF
I was talking about the Dell support problem and the guy said he would talk to his superior and see if something needs to be done, so I guess we'll see if something happens.
I hope it works for you!
Ben
Tags: Dell Laptop
Similar Questions
-
Windows 7 deployment using PXE to a UEFI + active secure boot Lenovo system.
Hello world
I was wondering if it was possible above? I have not yet put a lot of energy this uefi and secure boot thingy - said if just our supporters to change the bios settings to the legacy with secure boot disabled on the pre Windows 8 delivered Lenovo systems.
System deployment:
SCCM 2012 SP1 is running on a Windows Server 2008R2Concerning
Anders Jensen
Win7 can't Secure Boot.
-
I have a Dell Inspiron with windows XP and I can not start. I have the windows disc but do not know how to clean and reinstall. Please help me
You can repair XP or try the following:
http://support.Microsoft.com/kb/917964
http://support.Microsoft.com/kb/307545TO
Re - install http://support.microsoft.com/kb/978788
-
My Windows XP pro would not let me change the "Use welcome screen" option under: user accounts/change the way users connect or power off.
He gave a message to the effect (I forgot to write it!) "a recently installed program does not change this setting. Search in the file named "RtlGina2.dll for a clue. So as silly as I can be, I did a search, finds the file RtlGina2.dll in the Windows/System32 folder and cut and paste on my desk. My thought was to isolate this file to see if it will address the problem of not being able to change the option use Windows screen.
Now, I can't run Windows! It gives a message that this file RtlGina2.dll is not found! Specifically, it says, User Interface failure. The UI for logon RtlGina2.dll DLL failed to load. Contact your system administrator to replace the DLL or restore the original dll.
How can I replace the dll if I can't even get started? Help, please! I know just enough to get me in trouble I see.
WyoPathfinder,
Are you able to boot mode safe mode with command prompt? If Yes, then you can search for the file "dir /s /a RtlGina2.dll" lists the location where you moved to. Then you can just copy (path\filename) c:\Windows/System32\(filename)If you do not work in safe mode, then you can boot from a XP disc and go into the recovery console and do the same thing.
Hope that helps. QQ learn manage!
-
Former title: administrator
I have 2 computers in my church. Yesterday I arrives and the two or saying my Windows 7 Pro is not valid. To perform the validation. But come back as invalid. One is nearly four years old Dell, the other about 2 1/2 HP. Both have valid windows and never gave me any problems. Looked in the forum, and one of the things they said to run this program was. I did on the Dell. Here are the results. How can I fix these pop ups. I can't find my information on the Dell. I have it I'm thinking on the latest HP. But the two that began at the same time. On the same network, but different parts.
Diagnostic report (1.9.0027.0):
-----------------------------------------
Validation of Windows data-->Validation code: 0x8004FE21
Code of Validation caching online: 0x0
Windows product key: *-* - M3DJT - 4J3WC-733WD
The Windows Product Key hash: xo + ajVSpae7/4VoZjS7m6JL0f3A =
Windows product ID: 00371-OEM-8992671-00524
Windows product ID type: 2
Windows license Type: OEM SLP
The Windows OS version: 6.1.7601.2.00010100.1.0.048
ID: {9F8736A9-D71F-4695-A4C3-11BBEADD581E} (1)
Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Product name: Windows 7 Professional
Architecture: 0 x 00000009
Build lab: 7601.win7sp1_gdr.140303 - 2144
TTS error:
Validation of diagnosis:
Resolution state: n/aGiven Vista WgaER-->
ThreatID (s): n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002Windows XP Notifications data-->
Cached result: n/a, hr = 0 x 80070002
File: No.
Version: N/a, hr = 0 x 80070002
WgaTray.exe signed by: n/a, hr = 0 x 80070002
WgaLogon.dll signed by: n/a, hr = 0 x 80070002OGA Notifications data-->
Cached result: n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002
OGAExec.exe signed by: n/a, hr = 0 x 80070002
OGAAddin.dll signed by: n/a, hr = 0 x 80070002OGA data-->
Office status: 100 authentic
Microsoft Office Professional Edition 2003-100 authentic
OGA Version: N/a, 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3_E2AD56EA-765-d003_E2AD56EA-766-0_E2AD56EA-134-80004005_E2AD56EA-765-b01a_E2AD56EA-766-0_E2AD56EA-148-80004005_16E0B333-89-80004005_B4D0AA8B-1029-80004005Data browser-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default browser: C:\Program Files (x 86) \Mozilla Firefox\firefox.exe
Download signed ActiveX controls: fast
Download unsigned ActiveX controls: disabled
Run ActiveX controls and plug-ins: allowed
Initialize and script ActiveX controls not marked as safe: disabled
Allow the Internet Explorer Webbrowser control scripts: disabled
Active scripting: allowed
Recognized ActiveX controls safe for scripting: allowedAnalysis of file data-->
[File mismatch: C:\Windows\system32\wat\watadminsvc.exe[7.1.7600.16395], Hr = 0 x 80092003
[File mismatch: C:\Windows\system32\wat\watux.exe[7.1.7600.16395], Hr = 0 x 80092003
[File mismatch: C:\Windows\system32\sppobjs.dll[6.1.7601.17514], Hr = 0 x 80092003
[File mismatch: C:\Windows\system32\sppc.dll[6.1.7601.17514], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\sppcext.dll[6.1.7600.16385], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\sppwinob.dll[6.1.7601.17514], Hr = 0 x 80092003
[File mismatch: C:\Windows\system32\slc.dll[6.1.7600.16385], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\slcext.dll[6.1.7600.16385], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\sppuinotify.dll[6.1.7600.16385], Hr = 0 x 80092003
[File mismatch: C:\Windows\system32\slui.exe[6.1.7601.17514], Hr = 0 x 80092003
[File mismatch: C:\Windows\system32\sppcomapi.dll[6.1.7601.17514], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\sppcommdlg.dll[6.1.7600.16385], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\sppsvc.exe[6.1.7601.17514], Hr = 0 x 80092003
[File mismatch: C:\Windows\system32\drivers\spsys.sys[6.1.7127.0], Hr = 0 x 80092003
[File mismatch: C:\Windows\system32\drivers\spldr.sys[6.1.7127.0], Hr = 0 x 80092003
[File mismatch: C:\Windows\system32\systemcpl.dll[6.1.7601.17514], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\user32.dll[6.1.7601.17514], Hr = 0x800b0100Other data-->
Office details:{9F8736A9-D71F-4695-A4C3-11BBEADD581E} 1.9.0027.0 6.1.7601.2.00010100.1.0.048 x 64 *-*-*-*-733WD 00371-OEM-8992671-00524 2 S-1-5-21-890055707-3700788011-4137173457 Dell Inc.. Vostro 260 s Dell Inc.. A04 20111121000000.000000 + 00027493D07018400FE 0409 0409 Central Standard Time(GMT-06:00) 0 3 DELL WN09 100 100 Microsoft Office Professional Edition 2003 11 A13425717209500 H7a7aBeVLqx5dT8wl/fh4VlCK34 = 73931-640-2361196-57481 14 Content Spsys.log: 0 x 80070002
License data-->
The software licensing service version: 6.1.7601.17514Name: Windows 7 Professional edition
Description: operating system Windows - Windows (r) 7, channel OEM_SLP
Activation ID: 50e329f7-a5fa-46b2-85fd-f224e5da7764
ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
Extended PID: 00371-00178-926-700524-02-1033-7601.0000-0762012
Installation ID: 011441540984299760884230613245835330914140514442875583
Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
Partial product key: 733WD
License status: licensed
Remaining Windows rearm count: 2
Trust time: 07/01/2015-13:40:28Windows Activation Technologies-->
HrOffline: 0x8004FE21
HrOnline: n/a
Beyond: 0x000000000001EFF0
Event timestamp: 1:6:2015 10:24
ActiveX: Registered, Version: 7.1.7600.16395
The admin service: recorded, Version: 7.1.7600.16395
Output beyond bitmask:
Altered the file: %systemroot%\system32\sppobjs.dll
Altered the file: %systemroot%\system32\sppc.dll|sppc.dll.mui
Altered the file: %systemroot%\system32\sppcext.dll|sppcext.dll.mui
Altered the file: %systemroot%\system32\sppwinob.dll
Altered the file: %systemroot%\system32\slc.dll|slc.dll.mui
Altered the file: %systemroot%\system32\slcext.dll|slcext.dll.mui
Altered the file: %systemroot%\system32\sppuinotify.dll|sppuinotify.dll.mui
Tampered files: Check %systemroot%\system32\slui.exe|slui.exe.mui|COM
Altered the file: %systemroot%\system32\sppcomapi.dll|sppcomapi.dll.mui
Altered the file: %systemroot%\system32\sppcommdlg.dll|sppcommdlg.dll.mui
Altered the file: %systemroot%\system32\sppsvc.exe|sppsvc.exe.mui
Altered the file: %systemroot%\system32\drivers\spsys.sys--> HWID data
Current HWID of Hash: MgAAAAIABAABAAEAAAABAAAAAQABAAEAln3Y9sW5fH9GrZi8YjRK3UidACFi8H5JLnM =Activation 1.0 data OEM-->
N/AActivation 2.0 data OEM-->
BIOS valid for OA 2.0: Yes
Windows marker version: 0 x 20001
OEMID and OEMTableID consistent: Yes
BIOS information:
ACPI Table name OEMID value OEMTableID value
APIC DELL WN09
FACP DELL WN09
HPET DELL WN09
MCFG DELL WN09
SSDT AMICPU PROC
WN09 DELL SLIC
OSFR DELL M08apply the next update if you do not have and see if it solves the problem, then:
http://support.Microsoft.com/kb/3024777Restart, then wait a bit to see if the problem is resolved, if not:
then:
Click Start, right click on computer
Click on properties
Scroll down to the Windows Activation
Click on the link 'change product key '.
Enter the product key located on the COA sticker attached to the bottom of your laptop or in the battery compartment. Click next to activate via the Internet.
COA certificate of authenticity:
http://www.Microsoft.com/howtotell/content.aspx?PG=COA
??
What is the certificate of authenticity for Windows?
http://Windows.Microsoft.com/en-us/Windows7/what-is-the-Windows-certificate-of-authenticity
or
How to activate Windows 7 manually (activate by phone)
1) click Start and in the search for box type: slui.exe 4
(2) press the ENTER"" key.
(3) select your "country" in the list.
(4) choose the option "activate phone".
(5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
(6) explain your problem clearly to the support person.
http://support.Microsoft.com/kb/950929/en-usIf the problem persists:
Check your hard drive for errors:
Click Start
Type: CMD, according to the results, right-click CMD
Click on "Run as Administrator"
At the command prompt, type: chkdsk /f /r
When you restart your system, your computer will be scanned for errors and will try to correct them.then
Click Start
Type: CMD, according to the results, right-click CMD
Click on "Run as Administrator"
At the command prompt, type: sfc/scannow
This will check for any breach of integrity
Restart your systemWait and see if the problem is resolved later.
-
Windows 7 Pro will not restart if printer on.
Hello
When you click Restart, Windows 7 Pro will not reboot with a printer hp (L7680 or C309a) turned on. The screen remains right on "Starting Windows". Windows continues to load after that whatever printer is turned on.
This problem just started. Never happened before. I could always click on restart without problem before.
Any help?
Hey joe_do,
I see that you have a problem with the sequence of starting your Windows 7 Pro computer when one of your 2 HP printers are turned on. How are these 2 printers connected to this PC?
Looks like that devices can be connected to USB and somehow the computer boot sequence put the emphasis for USB on the internal HARD disk.
Jason
-
Hello, I have my ID Windows Live ID have not used for some time and I want to start using it again, live ID is always committed but I don't remember the password and I can't use the reset password option because I don't know that it is marked and "inactive". Please let me know promptly if you are able to reactivate my live ID. Once you answer this, I will use the live id address. Thank you in advance.
original title: can reactivate you my windows Live ID?Hello, I have my ID Windows Live ID have not used for some time and I want to start using it again, live ID is always committed but I don't remember the password and I can't use the reset password option because I don't know that it is marked and "inactive". Please let me know promptly if you are able to reactivate my live ID. Once you answer this, I will use the live id address. Thank you in advance.
It is a peer-to-peer (user forum. You don't talk to Microsoft directly. The answerto your question is, "No."
Windows Live Solution Center - HotMail - HotMail Forums Solutions
http://windowslivehelp.com/Hotmail - Forums
http://windowslivehelp.com/forums.aspx?ProductID=1Hotmail - Solutions
http://windowslivehelp.com/solutions.aspx?ProductID=1How to contact Windows Live Hotmail Support
http://email.about.com/od/hotmailtips/Qt/et_hotmail_supp.htmWindows Live Hotmail Top issues and Support information
http://support.Microsoft.com/kb/316659/en-us -
Windows XP pro, can not see desktop (just a blank screen) at startup. can access only via the Task Manager. How can I fix?
In the Task Manager, click on "File" and select "new task (run).
Type explorer.exe, and then press the ENTER key.
If you are able to connect successfully to the windows, scan the entire computer using updated anti-virus software and check the virus.
-
original title: my windows vista will not except the automatic updates and the system starts it will only configure the process which can be done to solve this problem
my windows vista computer will not except the automatic updates and when the system starts it will only configure the process which can be done to solve this problem
Hi Glennisidore,
Try running the fixit http://support.microsoft.com/kb/971058 in aggressive mode and see if, after the reboot, you are able to perform your edits again.
-
Original title: I do not see my available networks
I get this message when I try to solve the problem: Windows wireless service does not work on this machine and is called autoconfiguration WLAN service. Does not start Windows wireless service failed questions available detection area 5 Windows wireless service does not work on this computer only set not Windows wireless services is also called the autoconfiguration WLAN service. Network Diagnostics log file name: 5894B3A3-5541-48-A8FE-7A7E2E8E3B10. Detection of Repair.Admin.0.etl detail information name of the computer Collection: RODRIC29 - PC Windows Version: 6.1 Architecture: amd64 time: Thursday, August 23, 2012 12:27:11 Publisher details Windows Network Diagnostics detects problems with network connectivity. Package version: 1.0 Editor: Microsoft Windows can help anyone? (Windows 7 Inspiron computer laptop)
Hello
1 have you checked the State of the wireless autoconfiguration WLAN service in the services window?
2. do you have security software installed on the computer? If Yes, is it updated regularly?3. have you done any software or hardware changes on your computer before this problem?
4. What are the troubleshooting steps you have tried to solve the problem?
Refer to these methods.
Method 1:We will first try to manually start the wireless service, i.e. the WLAN AutoConfig service.
(a) click Start, type Services.msc and press enter.
(b) locate the autoconfiguration WLAN service, double-click to open its Properties window.
(c) on the general tab, change the Startup type to Automatic and click on the Start button.
(d) click apply and then click ok.
(e) try to connect to the wireless connection and check the result.
See also:
For more information on the wireless settings, see this link:
http://TechNet.Microsoft.com/en-us/library/ff802404.aspx
Method 2:
Using the troubleshooter from network in Windows 7
http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7
See also:
Windows wireless and wired network connection problems
Check if it helps.
-
We have Acrobat 9 Pro running on both PCs, with 7 and 8 operating system. We would like to turn off a computer with 8 because we get it. We want to disable Acrobat, then download on a Mac pro. However, we have not the deactivate option available in the drop down aid. Disabling is visible on another desktop computer. Can you advise us on how to disable it on the old laptop and download on the new laptop Mac?
You can't do that. If you have a license for Windows, you can not use it on a Mac.
In addition, Acrobat 9 is obsolete and is not compatible with any current operating system (including Windows 8, which is said by the way).
-
I am owner of Dreamweaver 8 comes with Macromedia Studio 8. I'm getting worried about the age of the machine which is on. Is there a way to upgrade a laptop Windows 7 which does not involve a monthly rent and allows to work on the source code of my Web site completely offline?
Thank you. Last time I looked into things with the description "Cloud", it seemed to me that you either need to be logged to the software work (possibly validate the rental date?) and/or your content of current things was 'in the cloud '.
While I don't like the rental model, if I can make it work offline that may be an option.
Fortunately, the machine still works, so I have little time to decide. It is likely that my existing sites in Dreamweaver 8 will be compatible up with current versions?
-
I have a Dell Precision T7500 with two processors, Xeon, 48GB of RAM, and recently I bought a PCI card captures Elgato HD60 Pro for streaming play.
Whenever the card is inserted, I see an error saying to start (after the Dell logo and before Windows loads):
"22/00/0: Error allocating I/O BAR for PCI device.
I have 2 other PCI cards, which I removed and also tried to install the Elgato map on the other 2 slots, but the problem only goes away when the Elgato card is NOT installed.
Any ideas?
This is not a dell product.
Error allocating I/O BAR for PCI device
strike F1 to retry boot, F2 for Setup utility
The PCI-E bus is version 1.1, but your card is version 2.1
http://Ark.Intel.com/products/36783/Intel-5520-IO-hub
Your Xeon processors are not listed as the min spec core I5 3 rd Gen.
There is no solution for this its the same reason that OLD maps sound and TV Tuner cards also do not work in the latest and most recent machines.
For PCI and PCIe devices, a BAR is a Base address register which is used by the BIOS or the OS to tell the device door on what looks to match its memory resources in. Most of the PCI devices in your system requires a certain amount of memory space, and the BIOS tries to adapt all inferior to 4 GB for compatibility with 32-bit operating systems.
-
Pentium 4 CPU
1 GB of RAM.
Win XP Pro - SP 2
Dell Dimension 4500
If it will not download from this link on your PC, try another and just use a USB key to copy on you and then run it. Once installed SP 3, and then the fun begins because there are about 100 + updates after her.
-
Freshly reinstalled Windows 7 Pro will not activate
I have a Dell Optiplex 780, which has a Windows 7 Pro OEM sticker on it. For some reason the previous TECHNOLOGY provider decided to install Windows XP on this machine and I am trying to fix this error.
Unfortunately, while the installation program gladly accepts the key of the sticker, activation failed. Œuvres of activation, phone, or internet.
I tried to use the Dell SLP key as well, obviously no chance.
Dell offers more OEM media for this machine as far as I can find, and I don't want the OEM media still because it is full of additional bloatware, that no sane person would want.
How can I install the OS that computer was purchased with the help of the legitimate license attached to the machine key?
I've never had problems with this in the past, other OEM machines worked fine with the same installation media using the keys of their COST. The phone activation is usually required, but worked at the difference this time.
When you attempt to activate phone talk to a tech representative, if not try the phone activation once again as follows:
How to activate Windows 7 or Vista manually (activate by phone)
http://support.Microsoft.com/kb/950929/en-us1) click Start and in the search for box type: slui.exe 4
(2) press the ENTER"" key.
(3) to select your "country" you are in the drop-down list.
(4) choose the option "activate phone".
(5) stay on the phone * do not select/press any option * and wait for a person to help you.
(6) explain your problem clearly to the support person.
(7) the person must give you a confirmation ID, copy it down on paper,
(8) check that the ID is correct in reading the support person.
(9) to enter the ID number, then click 'Next' to complete the activation process.Activation and registration of a Microsoft product
http://support.Microsoft.com/?kbid=326851
Windows activation: (888) 571-2048
(888) 725-1047 or 800-936-5700What's the relationship between activation and genuine Windows?
http://Windows.Microsoft.com/en-in/Windows7/what-s-the-relationship-between-activation-and-genuine-WindowsWhat is the validation, and how does it work?
Windows 7: http://windows.microsoft.com/en-us/windows/help/genuine/what-is-validation?os=win7
Vista: http://windows.microsoft.com/en-us/windows/help/genuine/what-is-validation?os=winvistaAuthentic Microsoft software program privacy statement
What data is collected?
http://Windows.Microsoft.com/en-us/Windows/genuine/privacy-statement-Product key of letters and numbers-
Not confused the letter B with the number 8, the letter Q with the letter O.
the letter G and the number 6.A, E, I, O and u are not used.
---------------------------- Alternatives -------------------------------------
To enable the use of the phone
1. open Activation of Windows by clicking on the Start button, right click on computer, clicking Properties.
then by clicking on activate Windows now. ?2. click on show me other ways to activate.
3 type your Windows 7 product key, and then click Next.
4. click on use the automated telephone and then click Next.
If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.5. click on the location nearest you from the drop-down list, and then click Next.
6. call one of the available phone numbers listed. An automated system will guide you through the activation process.
7. When prompted, enter the installation ID that is listed on your screen in your phone keypad.
8 Note the confirmation ID the phone system gives you.
9. under the terms of step 3, type the confirmation ID in the space provided, click Next, and then follow the instructions.
10. If the activation is not successful, stay on the line to be transferred to a product activation agent who can help you.
How to contact a Microsoft Product Activation Center by phone
http://support.Microsoft.com/kb/950929Activation and registration of a Microsoft product
http://support.Microsoft.com/?kbid=326851
Windows activation: (888) 571-2048
(888) 725-1047 or 800-936-5700Microsoft Activation centers worldwide telephone numbers:
http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
(This site is for activating Volume License, but if you call, they will help you)The phone number is not working:
Microsoft Worldwide contacts: http://www.microsoft.com/worldwide/default.aspxRegister Windows 7
http://Windows.Microsoft.com/en-us/Windows7/help/register
Register Windows 7 and you automatically receive a series of three welcome to Windows e-mails
filled with tips, creative tips and other information to you help get the most out of Windows 7.
You also get a subscription to the monthly newsletter of Windows Explorer,
where you will find other tips and tricks, as well as special offers.Learn about Activation:
http://TechNet.Microsoft.com/en-us/library/ff793423.aspxJ W Stuart: http://www.pagestart.com
Maybe you are looking for
-
I've healed before but can't remember how. It could have been passed to yahoo, but was able to return to googel as my main server.
-
Errors after rendering / export movie
Hey,. I worked on a project in iMovie 10.1.1. After completing the project, I made / exported as a file and saved on my desktop. Unfortunately, there are a few mistakes in there, on the written text (bold / unbold) in the rendered mp4 which do not ex
-
How to put in place of the daq hardware several lists on a shield with ecu mc toolkit?
Anyone has the pleasure to set up multiple lists on an ECU data acquisition? I use MC Addon for Labview ECU 2011. I can successfully a single list of acquisition of configuration data and read the data correctly. This method uses the DAQ list mode
-
Cannot install dragon naturally speaking 9.5 not compatible for 64 bit processor
When I use the installation for dragon naturally speaking disk, interruption comes along and says parameters that this version does not work on a processor parameter to be modified for 32-bit processor and 64-bit. How can I make it compatible?
-
problems mapping a network drive
I have Xp Sp3 in a field and sometimes, when a user makes a logon, Don t xp card all of their network drives