Elgato HD60 Pro card causing "error allocation bar of e/s for pci device" at startup on Dell Precision T7500 (Windows 10 boots well after that freeze but occasionally)

Similar Questions

• Dell Precision M4700 (Windows 7 pro) starts not once configured with UEFI and Secure Boot

  To all those who can help you:

  I got a Dell Precision M4700 and I update bios A05. I was intending to move to Windows 8. Everything was fine and the bios update was successful. I started the new bios under Windows 7 Professional (base OS) factory-installed and was very good.

  However, I can't get into the bios (not even see the POST from Dell or Logo) after I activate the UEFI and Secure Boot.This before I update to Windows 8 Pro. Now I'm stuck with a blank screen (same LCD not lit) and nothing to start. It's like a dead PC.

  Help, please. Is that what I can do or should I contact Dell Support for repair?

  Thank you

  I fixed it!  Just removed the CMOS battery, the BIOS got reset back to factory default.  So I did:

  (1) remove the battery

  (2) press the power button to the case of ground

  (3) remove the lower panel

  (4) disconnect the CMOS battery (it's tedious)

  (5) I hit the power button for some time (30 s) to clear the capacitors or something else, it was my theory, but I doubt it's necessary

  (6) use it to all back to the start

  When I turned it on it turns on and turns off several times before finally stay standing and I was then able to enter the BIOS and all the settings have been restored to factory default.  I am new to Windows 7 on my machine so I'll repeat the process, this time without disabling the legacy option roms!

  Here is the disassembly for precision M6700 and M4700 instruction manual if anyone needs:

  http://support.euro.Dell.com/support/eDOCS/systems/wsm6700/en/OM/om_en.PDF

  http://support.Dell.com/support/eDOCS/systems/wsm4700/en/OM/om_en.PDF

  I was talking about the Dell support problem and the guy said he would talk to his superior and see if something needs to be done, so I guess we'll see if something happens.

  I hope it works for you!

  Ben

• XI trial version of acrobat pro card WLAN Error (100)

  Try to download the trial version of acrobat pro xi, but keep the (100) error message. My network connection is fine. I don't know what the problem is.

  Please see http://forums.adobe.com/message/5035188#5035188 where this subject has been discussed.

• my computer says that my primary drive 1 not found, secondary drive 0 is not found. also allicating I/O bar for PCI device error.

  We had a power outage about 2 weeks ago, it burned my hard drive. My neighbor put a new disc in for me, now my computor is said primary drive 1 not found, O secondary drive not found, and 1 secondary drive not found. I do not know how to solve this problem, can you help me?

  Hi camicannon,

  Check out the wire link such question and check if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-system/XP-primary-hard-drive-disk-not-found/c98f8205-78d8-4e6a-A603-8c4fae852690

• Error "the fingerprint reader is not connected. Connect the drive"on Dell Vostro 5470 Windows 8.1 Pro

  Hello!

  I have laptop Dell Vostro 5470, with installed Windows 8.1 Professional 64-bit.

  I installed the driver of fingerprints and DigitalPersona 6.2 update, in a different sequence, but still - the drive is visible in the Device Manager, but NOT visible for the connection of Windows of fingerprints or DigitalPersona.

  I searched and tried various solutions (including fingerprints etc. sensor drivers.).

  Still no luck. And this seems to be a Driver problem Dell (last sensor driver is y2013, and there are a few discussions of the forum still unresolved).

  Hello!

  Yes, we have found a solution! :)

  In fact, the 'problem' was related to group policy Active Directory MS Windows. Logons "Biometrics" and devices could not in group policy.

  If your computer is a member of the field, try this or similar solution:

• SE "error-88705 occurred to self-test" for PCI-6520 after the electric bike for PC

  Hello

  I use a card PCI-6520 on an industrial PC running Windows Embedded Standard (64 bit).  The card works fine in normal use, but if the PC is power off and back on (instead of closing Windows in the start menu), the map do not communicate to the start-up of the machine.  If I try to run a self-test to the MAX, I get the error "error-88705 occurred to the self-test.  The card remains unusable until I restart the PC in the start menu

  Unfortunately this system will be used headless in an industrial application, so if he ever get turned off, it will be turning off the unit and not through windows or the soft power on the Panel switch front of the PC.  It is important that the machine can start in the application of LabVIEW in power on without any external intervention.

  There is also an NI GigE in the PC card and continues to operate correctly regardless of the way in which the PC is off

  Some of the system features:

  Card mother Intel DH67CL

  Core i7 3770 to 3.4 GHz processor

  8 GB RAM

  64-bit Windows Embedded OS

  NOR-DAQmx v9.3.5 driver

  See you soon,.

  Brett

  I just installed version 9.6 of the DAQmx and which seems to have fixed the problem

  See you soon,.

  Brett

• Import image - error 'cannot get all the files for this device. "

  Try to import images from my camera - Canon T3i.  Using both the SD card inserted into a reader and camera with battery connected USB Gets the error "unable to get all the files on this device. Please make sure that the equipment is connected correctly, or that the battery is charged. Files that have been achieved so far will be sent to multimedia elements. "All updates installed, running Vista x 64, 10 elements.

  Okay, found the problem.  Apparently the PSE does not like RAID1 arrays, which is a bit ironic, beings that she deals with photos, and people tend to do not like losing pictures.  Newho, if anyone has this problem in the future, as workaround for Adobe not have their stuff together, rather than import directly to a RAID 1 has HARD drive table, import them on another drive, then copy them to your RAID array.  Very disruptive and I wish adobe would just fix their problems (no other program has this issue, even video editing software... «and RAID 1 should really be used for that), but to use it as a workaround if necessary.»

• Runtime error Microsoft Visual C++ Runtime library for a right click on the folder! C:\Windows| Explorer.exe

  Hello
  I have a problem with windows Xp home :(
  When I right click on a folder (no file!), it happens:

  Microsoft Visual C++ Runtime library runtime error!  C:\Windows| Explorer.exe

  This application has requested the execution to terminate in a medium unusaual

  Strange that, in this case only when the name of the folder not constituted only a single character!
  I try safe mode, but still exist! Unfortunately I turn off System Restore. I also scan with nod32 (it is updated), but nothing has changed. I download c ++ runtime library from Microsoft and install it too. I also use fix tool from Microsoft, but my problem is still there.
  Please help me
  thx a lot

  Hi shjv,

  Please see the thread with a similar problem and fix possible:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_programs/Microsoft-Visual-c-runtime-library-runtime-error/b859b2cd-29C4-479e-9a91-6a2246ab7432

  I hope this helps!

• Error message "no additional applications designed for your device were found".

  
  

  Let me google that for you:
  http://CrackBerry.com/no-additional-applications-designed-your-device-were-found

  You can load applications using javaloader, for example. See the developer's guide for a list of all the possibilities.

• error code 32 - a driver (service) for this device has been disabled. Another driver may be offering the functionality

  Type of device, DVD/CD Rom drives

  Manufacturing (Standard CD Rom Drive)

  Location Bus number 1, target 1 lun 1. 0

  My computer repeat myself that everything is up to date and works fine

  Thanks in advance

  I went and deleted the line of the registry and it fixed. You can always do an export of the registry before deleting anything out if it messes up you can always import again.

  That's what I found

  You can fix this by going to start, then run, type regedit. Open hkey_local_machine, then system, then control, then the class, then 4D36E965-E325-11CE-BFC1-08002BE10318, once in this time more to the right side and remove the upper and lower filters then filters. Just restart your computer and your CD-ROM/dvd-rom drive will work properly, if you look in Device Manager it will be more of a question mark and it will tell you everything works correctly.
  It was not too bad. I'm also the one who does not like to mess with the registry, but when you have step by step instructions it seems to go ok. Also when I did that I don't have all the top filter just the lower part. From what I have found in some other forums is that some people have one or the other or both just delete both if they are there.

• PIC-7344 causes error-70095 in MAX

  I have install NI PCI-7344. MAX 5.1 application firmware update. I did:

  7.20.3008 to 7.40.3003 68331

  DSP of 7.10.3003 to 7.32.3003.

  I can't initialize the card. MAX throws "error-70095 (NIMC_DSPCommunicationsTimeoutError) occurred in ConfigVectorSpace on 1 coordinate." Internal error. There was an internal timeout when sending commands to the DSP. "It happens 2 cards in a row. They are the new cards. I thought that they work.

  Please help me to overcome this error.

  Thanks in advance.

  I try Greg sugesstion. It works very well. Thank you very much.

  Then the button [update Firmware] downloaded and flashed 4 firmware drivers for me: 7.40.3003 (68331), 7.32.3003 (DSP), 7.10.3003 (FPGA1) and 7.00.3001 (FPGA2). Different drivers between FPGA1 and FPGA2 is the cause of the problem. Right-click on the FPGA1 of the right list box item and choose 'download to device '. Initialization functions very well after that.

  Yet once again, I appreciate your help and your time.

• Dell Precision M90 recently upgraded to x 64 Win7 can not get correct graphics, stuck with the Standard VGA Graphics Adapter Card

  I have a Dell Precision M90 laptop and recently upgraded to Vista 32 bit to 64 bit Windows 7.  Everything worked perfectly, except for my display drivers.  Windows 7 installed a driver called Standard VGA Graphics Adapter.  This driver has a very low resolutions only and cannot deal with games or same Aero.

  I had an experience with updated video drivers with Vista.  My graphics card is a NVIDIA Quadro FX 2500 M.  When I had Vista there is no Vista compatible driver for this card, so I used the Geforce 7900GTX driver (which is inspired by the FX 2500 M) and it worked fine.  Of course, the Quadro FX 2500 M doesn't have a driver compatible windows 7.

  I downloaded the driver for the 64 - bit Windows 7 Geforce 7 series so I could upgrade and use, however when I used the NVIDIA installer it says that my computer has no compatible hardware for this driver (I tried to install it in Vista compatibility as well).  I tried to force the upgrade by using the option "have disk" and choosing the .inf directly file.  This did not always and said that he could not work because "the selected driver for this device does not support this version of Windows" even if it is the version of Windows 7.

  I also tried to start my computer in safe mode, uninstall the VGA Standard driver and then install the driver NVIDIA, but it does not work either.

  Sorry for the long post, I just wanted to add as much information as possible I hope to solve this problem.  Thank you for taking a look and thanks for your suggestions!

  Fixed!  Finally!  Dell.com took the pilot... but the link that they had posted on the page of Precision M90 was mislabeled.  I tried another way, found the good pilot, and got, it works.  Solved the days and days of frusturation.

• Get the error code 31 this device is not working properly because Windows cannot load the drivers required for this device.

  Original title: WAN miniport driver

  A yellow sign appears on MINIPORT Wan (IP), MINIPORT (IPV6) AND WAN WAN MINIPORT (NETWORK MONITOR) for this reason I have not access to internet to throw bluetooth tethering that even he does not connect. In the properties of the driver, it indicates:-this device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

  I use windows 8 in my sony vaio
  MODEL - SVE15123CNW

  Hi Praveen,

  Perform the steps suggested by Nirmal S from the link below and see if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-hardware/i-get-an-error-code-31-in-Device-Manager/3364d05a-af20-4f6d-8597-b4b9f6a74b60

  Answer please if you have any questions.

• my Macbook Pro Very Slow error loading, error, Trackpad trolling Kernel_task bar

  HY sorry my bad English...

  I searched google but couldn't find a solution... I use macbook pro 2011 13 inch 2, 4 GHz core i5 standard end

  Why my macbook pro late the trackpad, kernel task error and loading very slow bar sttartup, but this problem is not in safe mode, with all the normal safe mode

  measures have I made:

  -change the hard drive

  -change the disk sata hard

  -battery change

  -change the trackpad and trackpad cable

  -change the OS 10.6, 10.7 10.10, 10.11

  -change model point via

  and unresolved problen my macbook very very slow loading bar (it also occurred when I first started by flashdisk and in Setup mode in ulities OSX as a kernel error task late trackpad) sometimes the trunk sometimes will not start and if I change the SID model that works, but when booting from flash for a long time

  is there a solution that is more useful? very confused i

  0o0o

  If it doesn't happen in Mode safe, there is probably a software problem. Can you post an Etrecheck report? http://etrecheck.com/

• Sudden video card reader error causing freezing

  I use first items 11 and suddenly it started showing the video card reader error trying to create a new project or open an existing one. The error that says detected Adobe one driver incompatible display GeForce 9600 GT/PCIe/SSE2 3.3.0 and ask me to update the driver. If I click OK on this message Adobe starts, create or open a project, but freezes. I can't even close the application that the computer does not respond to Ctrl + Alt + Delete and so I have to force restart it. When it freezes, I see two Adobe logo at the bottom of the screen in the taskbar as if she would try to open the application twice.

  I have the latest video card driver installed: 340.52 version. In addition, Premiere Elements opened and worked without problem before and I haven't changed anything in my video card driver before the error started to appear.

  Any idea what can be the problem and how to fix it?

  Display & Baddriver http://forums.adobe.com/thread/1370916?tstart=0 driver