Dell Wireless 1395 802.11 g WiFi card compatibility with Windows XP

I would like to buy a Vostro 1000 with Windows XP to replace a Dell Inspiron 1100 failed on a home WLAN.  However details of the card WiFi of 1395 provided with lists of Vostro Vista as the only supported operating system.  I don't want Vista to avoid potential compatibility issues with the rest of the network that uses XP, especially the Linksys router.  However, I have seen the 1395 as having drivers for Windows XP.  If anyone can clarify this?


Tags: Dell Products

Similar Questions

  • Dell Wireless 1702 802.11b/g/n - device errors

    I have a Vostro 3550 running Windows 7 Pro. He has a card of Dell Wireless 1702 802.11b/g/n with an intermittent fault:

    The error messages of this device, Report Manager are:

    This device cannot find enough free resources that it can use. (Code 12)If you want to use this device, you will need to disable one of the other devices on this system.
    

    and also:

    This device cannot start. (Code 10)
    

    These two appear about 80% of the time while trying to use the Wifi. A restart of removes it the error message and the wifi can sometimes serve as usual for a short period before one of the errors reappear. When booting on a live-cd Linux error messages also appear with the ath9k drivers.

    I was not able to find any help elsewhere, but the laptop is still under warranty and otherwise in good condition.

    This problem was corrected by a Dell technician replacing the physics of the wireless card

  • Cannot find drivers for Dell Wireless 1395 WLAN mini-map for my dell vostro laptop 1400

    install the drivers for the controller network by name

    Dell Wireless 1395 mini-map of the cd WLAN failed and could not find it online too.

    Go to: http://support.dell.com/support/downloads/driverslist.aspx?c=us&cs=19&l=en&s=dhs&ServiceTag=&SystemID=VOS_N_1400&os=WLH&osl=en&catid=&impid= and select network devices and there you will find drivers for the WLAN Wireless 1395 mini-map for Vostro 1400 laptop.  Make sure you check the first good version of Vista to ensure you get the correct driver.  It would be better if you are returned and entered your product Tag so the system would correspond to results to your specific computer, but you (and you could buy them separately in which case they may not be listed).

    I hope this helps.

    Good luck!

    Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Dell Wireless 1395 WLAN can communicate with the Netgear router

    Everything works very well with my old HP laptop.
    Now, I also have a Dell Inspiron 1520 with a Dell wireless 1395 WLAN mini map. I can't links with my Netgear router using the new Dell. However, I can link to the top of my next "s"Linksys"router, but by very weak signal because of distance. How can I set up for my Dell to connect with my Netgear router?  I went through all the routines of wireless network of Microsoft AND Dell Wireless network routines.


  • If I have a windows vista dell optiplex 760 and 755 and when I reload with windows 7 can't me activation that is legal?

    If I have a windows vista dell optiplex 760 and 755 and when I reload with windows 7 can't me activation that is legal?

    "carlostorresWG" wrote in the new message: * e-mail address is removed from the privacy * _vista...
    If I have a windows vista dell optiplex 760 and 755 and when I reload with windows 7 can't me activation that is legal?
     
    If the machine came originally with Vista, and you charged it with Win 7 disc by the same manufacturer, it will go into a grace period and the non-genuine end - the key used for this installation requires data appropriate to the SLIC table in BIOS in order to activate it.
  • Reference Dell photo printer 720 compatibility with Windows 8

    Is Dell photo printer 720 compatibility with Windows 8. ?

    You would be better to replace this printer.  It was a free add to dell computers sold in 2004 that cost $25 buy then. It's time to buy a new one.

    It is not compatible with windows 8 - see THIS
  • Compatibility problem XP Dell Wireless 1395 mini-map WLAN driver currently installed Vista Home Edition 32 bit Service Pack II

    Hi, my OS is Windows Vista Home Edition 32 bit Service Pack 2 - installed on XP by the owner without first unintalling XP.  Although my Device Manager lists the mini-map Dell Wireless WLAN 1395 as working properly, what Windows says that it has stopped working correctly because the driver installed is not compatible with my current operating system (just one of the many questions).  Although I can get online wireless most of the time, IE and Google Chrome often freeze and there are a few minutes, I got a blue screen - not for the first time - that shut down Windows.  I note the other error message information that a fatal error has occurred that required Windows stops, so am not sure that the two problems are related or not.  I tried to find a compatible driver for what I assume is a WLAN Mini card for the original XP OS on the compatibility of Vista site, but there is no driver is listed for the Dell Wireless WLAN mini-map 1395.

    I have the Vista installation CD, but not the verification code necessary to reinstall.  It will appear somewhere on this computer under the program or the ancillary system (information) available to administrators?

    Just out of curiosity, there is a feature of rectangular white USB printed with the name "Biogear" attached to one of my ports, although he is not listed among devices on my computer since the computer laptop original owner died and I can not ask what is its purpose or what program it was meant to facilitate. I tried to remove it and it came out (the envelope detached the part inserted into the USB port) without affecting my ability to access the Internet wireless.  An internet search has a line of golf apparel and a few articles in German... Any ideas?  Thanks, Lara

    If the original owner installed Vista on XP, you need to reformat and do a fresh install of Vista or you will continually have problems multipling. If the original owner is an update from XP to Vista it is OK. However, the problems that you're seen suggest the original owner installed Vista on XP. Verification code (if found on the computer) will not be for Vista but for XP. As long as your operating system is installed, you can retrieve the key with Free Key finder software, do a search and you will find them on the internet. Also if you have the CD and ask for a new key to Microsoft you will get it at a very low price, I don't know no current tax, was $ $10,00. Since you are not the original owner (and the first owner died) both of these options may not be totally legal, unless you can provide proof of purchase or the person deseased was a member of the family.

  • Dell Wireless 1502 (802.11 b/g/n) half mini-map WLAN

    Tried to remove this map on a new Dell Vostro 260 (there where he didn't need) and put it in a Dell Optiplex 360 with Windows 7 x 64.  When you try to install the driver the setup.exe gives the message: "Setup cannot run on this platform."  I tried to check I select the Win7 x 64 option to download but still no luck.  The file info is Driver Atheros 26/05/2011 - Version 9.1.0.328, A01.

    Maybe is this not compatible with older hardware Core 2 Duo card and require an i3 + chip?

    Even if your original post is a year old... I had the same problem. I downloaded the x 64 driver package 9.1.0.328, A01 win7 and it failed with the same problem. (The strange thing is that I have an another Inspiron 620 running win7 x 64 and the driver installed, a native of Dell, is the 9.1.0.328 version?) So, I tried the other available win7 x 64 package, 9.2.0.517, A02. Yet once, didn't with the same "the installer cannot run on this platform." I decided to try and manually install the driver instead of using the installation program. Pass - Manager Control Panel/hardware and sound / control unit and made a right click on this card in 'network adapters' click on "update driver software," go in the appropriate directory on the C: which was created from the extraction of the package, and then click 'ok '.  I could get my dell 1502 works this way. I deleted the complete directory which was created from package 9.1.0.328. I found myself with worm 9.2.0.517... only because it was the second package that I've extracted. I assumed that 9.1.0.328 would have probably worked this way too much.

  • MiniPCI Wifi card work with Satellite A200-1V0?

    Wifi miniPCI card works with Satellite A200-1V0?
    Specifically the Intel Pro/Wireless 3945 ABG Mini PC will work with this laptop?

    See you soon,.

    Prashant

    Hello

    To my knowledge the laptop supports dual-band built-in antenna and it was a 802.11(b/g) 13ch-minPCI WLan RTL8187B Realtek card.

    The replacement of WLan should be possible, but it s very delicate because whole books must be disassembled to gain access to the WLan module

    This can be done by a technician of the ASP.

    But why you want to replace the WLan?

  • Tungsten E2 Sandisk Wifi card compatibility

    Hi @ all! I have a Tungsten E2 and an e/s of Wifi-card Sandisk SD Wlan (SDWSDB000). Did someone knows if it is possible to use this map or is still incompatible with the E2? Next problem will be the drivers - Sandisk itself is paid to them. Somehow, I feel that the original Palm-Wifi-card only works... Glad all the answers! Greetz from Germany - Susanne

    OKI, so I'll get on the internet and hope to find somewhere.

    Thx for your help!

    Susanne

  • No Wifi Iconia W500 with windows 10

    Hello

    I upgraded my Acer Iconia W500 from Windows 7 to Windows 10 own factory.  I made sure that I have ALL the updates from Microsoft.  Everything works great EXCEPT that I can't get Wifi to turn on.  The button to activate the Wi - Fi is grayed out. Airplane mode is NOT on.  If I go to the network settings, the slider for Wi - Fi is disabled and when I pass it on it just turns right back to the off position.  I've updated the driver Wifi for the latest driver, I could find which is Qualcomm Athereros Communications 3.0.2.181 with a driver date 12/03/2015.  I tried uninstalling the driver and the device several times and allow Windows to find the adapter again.  Whenever he recognizes the right device and installs the driver.  I even looked in the bios to see if the wireless adapter has been disabled, but it is not yet a Wifi option in there.  I tried to uncheck the 'allow the computer to turn off this device to save power"option in the properties of the adapter, but it doesn't help.  I don't see any errors in the event viewer (or anywhere else).  I can use the LAN adapter very well, but it doesn't make it very portable if I can't use Wifi.  Someone at - it ideas?

    Thanks for your help!

    Hey there! Recently, I had this same problem on my Acer One 10 series. I've been frustrated with it for about two weeks! What had to happen, it is that the driver used to connect to wireless networks do not automatically update to a version compatible with Windows 10. In order to download the correct version, the only answers that I could find were to go to the manufacturers Web site and download a driver from there. The problem is that you can't really do that as easily without wifi.

    What I suggest, is to use another computer to go to the Acer site. Click on the tab "store". Then choose your country. On the next page, scroll down to the bottom, under 'support', there is a link that says "driver downloads".

    From there, enter or search for your model. Once you have selected your model, below there will be a list of driver downloads, you might need. The one you want is 'Wireless LAN'

    Another computer, this download to a flash drive, then download it from the flash drive on the device with the questions. Make sure it is in a real folder, so it does not disappear when you exit the flash drive (obviously).

    Once downloaded, go to the start menu and select settings. Click Update and security, and then resumed. Click restart now under "advanced startup." it will make something akin to restart, do not touch anything until it gives you the option to select "Troubleshoot".

    Once you have selected troubleshoot, select 'advanced options', select 'Start settings' then 'restart', it will then take you to a list of options, select the option to disable the signature of driver backup.

    Once you have selected, your device should restart. Once he does, the new driver update should be tactful and you should be able to access the internet.

    It took me two weeks to understand this, all this, but the process that I wrote for you probably takes less than an hour and it actually worked.

    I know that it is a batch, but it worked for me, and I hope it works for you! Good luck!

  • Discrete cards compatibility with HP ENVY h8-1403es

    Hello

    My friend wants to change his 640gt included in a HP ENVY h8-1403es for another graphics card. He wants to install a 770gtx but it seems impossible because of lower power, not enough distance to place it in the pc box and has problems with motherboard bios "IPMMB-FM (Formosa)" it seems has no compatibility with the 770gtx series and others... causing a black screen at startup bios.

    I read something about the best compatibility with the gtx 6xx series, but first of all, I want to be sure compatibility in the Bios that the models or similar.

    Can you please confirm compatibility graphics cards?, updates or bios problems?, also to ensure that the problems of knowledge. ? It is the only location only?...

    A recommendation on compatible cards?

    Thank you very much.

    Hello

    Apply the update posted last BIOS prior to a new installation of the graphics card.  You'll need to access the BIOS and disable Secure Boot to apply the update to the BIOS.

    HP Secure Boot Windows 8 themes Computer does not start after the installation of a video (Windows 8) card  

    The h8-1403es HP has 460 watts power, so if you do not want to replace the power supply then you need to find a graphics card that meets the minimum power of 460 watts nominal power graphics card manufacturers.

    If your friend wants a faster than the 640 graphics card then space must be freed up on the inside to adapt to a double wide graphics especially if the graphics card is of the order of the 770 of NVIDIA.  Graphics in the NVIDIA 770 range would require a bigger power supply.

    Consult this publication of the article.

    Sapphire R7 250 would be much better than the 640, but not in the range of the 770 of NVIDIA.

  • Dell AIO946 compatibility with Windows 7

    I just got a computer with Windows 7 and my AIO 946 does not print. The printer is recognized and says it's ready to go, but nothing prints. I said that my 64-bit system needs a driver for Windows vista to run the printer, but I chatted to the guy in India (he told me my printer was out of warranty and so he couldn't help me) and I tried able to move to a sales associate to find out if I have to buy a new printer and they are not answer to (page does not load when you click on the chat button on Dell.com). Can someone tell me how to find and download the Vista driver so I don't have to throw a perfectly good AIO printer! ???

    nancyjean801,

    Try following that located instructions...

    946 owners photo printer all-in-one thread (W7)

    The trick is to install the Vista drivers in compatibility mode.

    Rick

  • Wireless 5000 mouse & wireless keyboard 3000 V2.0 is not compatible with Windows 7 64 bit

    Title of MU days all of this. Has got around the installation of the material above, downloaded updates from the MS site, but Windows 7 64 bit still says there are compatibility problems. Read the other responses on the forums, but in fact, it seems to be a problem unsolved for others too.

    Wireless 5000 mouse & wireless keyboard 3000 V2.0 still not compatible after downloading updates from microsoft driver, said my windows 7 64 bit


    Hi Nyasaboy,

    Wireless 5000 mouse & keyboard 3000 V2.0 Wireless both are compatible with Windows 7 so I would like to know the exact error message you received when you tried to install the driver update for the mouse wireless & keyboard?

    For now, you can uninstall the drivers for keyboard & mouse from the Device Manager and restart the computer that will install the default drivers for keyboard & mouse and check if it works.

    1. type devmgmt.msc in the search box start and press ENTER.

    2. in Device Manager, expand the mouse & keyboard listed in the list of devices.

    3. right click on the driver > click on uninstall.

    4 restart the computer. The drivers will install automatically.

    You can also follow this link and check if it helps.

    Troubleshoot the incidents of the response to the mouse or wireless keyboard

    http://support.Microsoft.com/kb/838398

    Hope the helps of information. Please post back and we do know.

    Concerning
    Joel S
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • When the function insert card reader with windows asking to format micro card?

    Hello, I have problem of a few days.when ever I insert the card reader with micro SD card windows asking to format...
    It is not happens with a single card, any micro SD card, I have insert Windows you want to format... but the card worked perfect in telephony, mobile and other things...

    I also try to use the same card reader & card in different windows 7 PC... It's working perfectly... .so help me with this...

    Hello

    Method 1:

    Follow the link below, run the fix it tool and check if it helps.

    Hardware devices do not work or are not detected in Windows

    http://support.Microsoft.com/mats/hardware_device_problems/en-us

    Method 2:

    1. check if the device is detected in Device Manager. Follow the steps to go to the Device Manager

    i. click on start, type devmgmt.msc and then on enter.

    II. research the name of the device

    If the device is not detected in Device Manager, and check if it is the hidden device.

    i. click on view under view hidden devices

    II. develop all winks in Device Manager

    III. there would be multiple entries in the device in gray Manager uninstall all entries shaded under all the winks and then restart the computer and connect the external device to the computer and check if it works

    2. install the latest drivers from the manufacturer's Web site and even ensure that the driver is compatible with the version of the operating system installed on your computer. Check if it works

    Links: http://windows.microsoft.com/en-us/windows7/Update-a-driver-for-hardware-that-isn ' t-work correctly

    Installing the driver in compatibility mode: http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

    3. check with any other card SD one another if it is get recognized or detected or you can even check if the same SD card becomes recognized or detected on another computer

Maybe you are looking for