Dell XPS 13 how disable FN + Insert?

Similar Questions

• Upgrade the hardware of Dell XPS (L521x) how to perform a clean reinstall of Windows 10 Pro

  Hello

  I searched on the internet with the question that I have before doing the upgrade and the re-installation of windows. But the messages and solutions are all scattered. I really want to clear this for me once and for all if possible.

  First of all, the material that I bought for this upgrade:

  1 Samsung 850 EVO mSATA SSD 120 GB (to replace the one 32 GB (factory default)

  2 western Digital Black 750Go Performance Mobile HDD (7200 RPM, 2.5 inches)

  3 Intel (r) Dual Band Wireless - AC 7260 (802.11ac, 2 x 2 Wi - Fi, Bluetooth)

  4. crucial Ballistix Sport SODIMM 16 GB (2x8GB) PC3-14900 CL10 at 1.35v 204 pin memory

  BTW, my Dell XPS 15 L521x has an intel core i7-3632QM and an nVIDIA GeForce GT 640 M. It also comes with 32 mSATA SSD as cache for the WDC 1 TB HARD drive.

  My goal:

  1 install/reinstall Windows 10 mSATA SSD 120 GB and free 500 MB give or take for system reserved partition.

  2. use the remaining space in the C: drive.

  3. use WD Black 2.5 inch 750 GB HHD for cold storage

  4. Remove and reinstall the wireless card Intel Dual Band for a better Wi - Fi compatiability for most routers dual band out there. (Factory default, well, is not great to say the least)

  5. Remove and then install the crucial RAM (compatiable with L521x) is to upgrade memory of my laptop (maybe a little future-proof;) (D).

  Before you start the upgrade, I know I have to do the following steps:

  1. update my BIOS/UEFI. (I did it)

  2 clear accelerated Intel Rapid Start Technology (IRST) GUI (my laptop keeps inviting that "your system does not have any intel repaid with start technology").

  3. change Intel Smart response Technology (ISRT) to AHCI in BIOS

  4 back up my files

  5. my 10 Pro Activation of emergency Windows (how exactly? The Win10 Pro is upgraded to Windows Pro 8.1 with OEM Dell)

  Now my question is what I do or what I've been missing so that what I will meet errors or problems if possible.

  Also, I have heard or seen something on the OEM of Windows version. If I change the hardware, disk files or recovering backup activation does not recognize my device. Is this true? If necessary, I can buy a new version of Win10 Pro retail. But, what I really need to do, and does it perform a not-so-complicated work around?

  Thank you very much

  Dean

  If you keep your motherboard you have no problem taking the other components such as SSDS.

  Your system is already a Pro 10 Windows device.

  Installing clean with 10 Windows installation media Pro TH2 your OEM Pro 8.1 Windows key will be automatically entered to the UEFI BIOS and Windows 10 Pro TH2 automatically reactivates when your systems online.

• Dell XPS 8700 how turn on?

  I have a desktop computer tower Dell XPS-8700 newish PC. He died during the other days of power outage, and now I can't turn it back on. It doesn't seem to be any power button visible on the front of the unit. On the back, just below the power connector is a small push button. If I push the fans and things seem to start that going on, but as soon as I release the button it turns off again. How can I activate this PC?

  I can't believe I have to ask this question after 30 years of use of PCs.

  Thanks – Rowan

  Number 6on the top.

  

• Dell XPS 8700 - How to install Windows XP on it

  Hello

  I have read on this forum that it was possible to install Win XP on XPS 8500 and wanted Trailblazers thanks!

  I was wondering if someone has even tried to install XP on the 8700?

  I should receive my XPS 8700 with Win 7 Premium on this topic next week?

  I then unplug the original HD and try to install XP on one of my free SATA 3 SSD.

  Also, very probably I will change the video card for another model with a compatible driver that I used for a few years in another i7 PC (I have a spare card).

  The early problem would be drivers, in particular drivers Ethernet/LAN

  Any advice would be greatly appreciated!

  Please note that I prefer (in spite of having a legal copy for Win 7 and Win 8 Pro lying around) Win XP for my typical usage.* *.

  Thank you

  XPSTester

  I got the PC.

  Step 1: Unit under test and recovery CD made.

  Step 2: BIOS Mode changed SATA AHCI RAID Mode changed.

  Step 3: Air conditioner stops. HARD drive disconnected original. SSD connected instead.

  Step 4: Windows XP is installed from the CDROM. PC works fine, super fast.

  Step 5: Realtek Ethernet controller installed (see the link above, thanks again Sandeep! :-).) Surf the Internet, it is now possible and, therefore, all the rest. The most important step accomplished :-).

  Step 6: Install my own ATI video card and drivers Realtek Audio & HDMI. Playing music and video on an HDTV in Mode Extended accomplished!

  I got 5 points at issue in Device Manager after installing Win XP.

  3 of them have been solved by various software to Intel.

  2 of those remaining are related to Wireless & Bluetooth.

  This is the best I could do at the moment... :-)

• Dell Inspiron 15R cannot disable the touchpad

  Hi all

  because this model does not detect function of palm that eliminate palm accidentally trigger the touchpad, I looked for ways to disable the touchpad.

  http://Forum.NotebookReview.com/Dell-Inspiron-Dell-Studio/567926-how-disable-touchpad.html

  link above may not help me.

  your help is very appreciated.

  Hi JamesyMY,

  It seems that the problem is with the utility of rapid setting due to which + or does not work. You can install the utility of rapid adjustment from the link: http://dell.to/Zl7Oz3.

  You can also update the touchpad drivers, please see the link: http://dell.to/10wz2Ow.

  Keep me posted with the results. I'll be happy to help you.

• Dell xps m1530 are how much they cost

  HOW DOES THIS COMPUTER TO A VALUE.

  Hello

  There's not a simple answer to this question.

  Here are the results from Google product search (Bing results were less useful in this case.)
  https://www.Google.com/search?hl=en&TBM=shop&q=Dell+XPS+M1530&OQ=Dell+XPS+M1530

  Don

• Checking file system on C: the Type of file is NTFS. The Volume is dirty. -What this means and how do I clean the Volume, please? My computer is Dell XPS

  Recently, when I turn on my computer is starts, guests of the computer and starts check my system files as follows: "checking file system on C: the Type of the file is NTFS. The Volume is dirty. "That is what this means and how can I clean and maintain the clean Volume, please? My computer is Dell XPS

  The computer system continues and invite "CHKDSK checks the files (step 1 of 3)... .

  The system deletes some files and at the end of shows, complete audit files and then show

  CHLDSK is verifying indexes (stage 2 of 3)...

  Once again, it shows the following:

  Deleting Index Entry _64280 ~ 1. jpg in index file 4632 $130

  Deleting Index Entry _64280552_little-mix_211112_get [1] .jpg in index file 4632 $130

  Deleting Index Entry 69gw [1] .jpg in index file 6722 $130

  Remove entries of Index 69 GW_1 ~ 1. jpg in index file 6722 $130

  Deleting Index Entry _64274754_messi_211112_elvis [1] .jpg in index file 6722 $130

  Deleting entry Index _64274 ~ 1. jpg in index file 6722 $130

  Finished the index checking

  CHKDSK is checking security descriptors (stage 3 of 3)...

  100%

  CHKDSK checks usn Journal...

  Windows control disc is finished.

  After all checks, Windows proceed to start as usual.

  I would like to know if I need the dirty Volume, and if so, how can I carry out the cleaning operation.

  Sometimes, at the early stage of the CHKDSK, the computer makes a pe. .. PE... noise and cut.  Then I turn the computer off via the key of the insulation. When I restart the computer, it then runs the check again until the end.

  Please advice me on the following points:

  1 is this normal as he started only happening in recent weeks?

  2. How can clean the Volume in order to show "Volume is clean instead of sale"

  I look forward to hear from you.

  Thank you

  Hi, Dr.,

  Volumes that contain file system errors are known as Sales. To indicate that a file system problem has occurred and that the volume is dirty, Windows XP Professional displays a message similar to the following when you try to open, delete, or rename a file or folder by using Microsoft Windows Explorer or the command prompt:

  Autochk runs if the volume is marked as modified.

  If the file system has marked the volume as dirty, Autochk runs the Startup Repair process. Volumes are marked as dirty, when the file system detects an error on the volume. If Autochk detects a dirty volume, it provides a delay of 10 seconds, and then starts the repair process. If you cancel Autochk when a volume is dirty, Autochk tries to run again after a 10 second delay every time the computer is restarted.

  See Chkdsk for all the necessary explanations:

  http://TechNet.Microsoft.com/en-us/library/bb457122.aspx

  Run the Dell Diagnostics to check the drive failure.  If the disc is a failure, it must be replaced.

• My A940 dell printer spooler is disabled. I don't have how to restart it. Please help PS I have awindows XP 32 PS my e-mail is _ @_. ___

  My A940 dell printer spooler is disabled. I don't have how to restart it. Please help PS I have awindows XP 32 PS my email is * address email is removed from the privacy *

  The people who answer questions here are, for the most part, volunteers who have no connection with Microsoft.  Ask your question every two minutes won't get you a faster response.

  Often, but not always, the symptoms you describe are caused by a corrupt print job stuck in the queue or a damaged printer driver.  However before you clean things up, on general principles, that you can download, install, update and run full scans with each of these two free programs:

  AntiMailware MalwareBytes
  SUPERAntiSpyware

  Do not operate the two scans simultaneously.  Each will take a long time, so start it and then go do something else for a while.

  Cleaning of printers

  NOTE: If after completing step has the spooler print don't rest not always running after you launched the command "net start spooler", follow these steps

  Open a command prompt window (start > run > cmd > OK)
  Type the following line in the black command prompt window
  dependent on the spooler of sc config = RPCSS
  net start spooler

  If the spooler still will not start, you will not be able to follow all the steps in "First Article".  Instead, go to the other link and download and get and use the utility 'cleanspl' such as described here.

  A. Clean on print jobs pending

  • Open a command prompt window (start > run > cmd > OK)
  • Type the following in the black command prompt window, and then press ENTER after each line

  net stop spooler
  del/q '% windir%\system32\spool\PRINTERS\*.* '.
  net start spooler
  output

  B. clean the old printer drivers and install the latest drivers by using the directions in One Article.  If you have (or had) a Lexmark printer, follow the instructions on the following site before installing the new drivers, as explained in its first Article: http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm

• How to install the second hard drive in the Dell XPS 8900

  My new Dell XPS 8900 only has a single HH and I would install a second HH.  Probably 3.5 SATA internal a 2 T.  I need a repair of XPS 8900 so that I know how to install the second disk.  I just need a few simple instructions so that I know how attached a data cable SATA and do the go by car.  Direction will be appreciated.

  You will need the drive AND a data cable.  The manual is here:

  www.Dell.com/.../manuals

• Can't find the Insert key on Dell XPS 10 tablet with keyboard docking station

  Original title: Windows RT Question

  I have a Dell XPS 10 tablet with keyboard docking station.  I can't find an "Insert" button anywhere on it. I use a remote connection which has a login screen that requires a combination of keys Ctrl-Alt-Insert to initiate. Searched high & low online and off. Can't find a way to generate the Insert key race in this environment on this tablet. Someone at - it the answer?

  Hi Kerry,

  You can consult the manual provided by Dell, namely the architecture detailed on the keyboard. Also, you can get in touch with Dell support. Check out the link to post the same query in the Dell forum:

  http://en.community.Dell.com/support-forums/laptop/

  In the meantime, you can use the onscreen keyboard. Check out the link to use a keyboard on the screen under Windows:

  http://Windows.Microsoft.com/en-us/Windows-8/type-with-the-on-screen-keyboard

  Please let us know if you have more queries on Windows.

• How to install WLAN PCIe wireless card N 1525 in Dell XPS 8500?

  I have a system Dell XPS 9100 which has a Dell Wireless - N 1525 PCIe WLAN card (a, g, b, d) I would like to transfer into my new Dell 8500, which comes with a mini-map half 1703 of Dell Wireless WLAN (b/g/n). This is because Dell 1525 is dual band and is faster than the Dell 1525. I would like to get some advice if possible and the installation of the Wireless N 1525 in the 8500 XPS WLAN PCIe card (and replacing the mini-map half 1703). Thanks in advance!

  Hi mikeraj,

  Thanks for the reply. There is no need to uninstall the Dell Wireless 1703 card drivers. You can get away without uninstalling the drivers

  Then insert the Dell 1525 Wireless card and install its drivers.

  I hope this helps. I am happy to help others.

  .

• FN + F3 disable the Touchpad does not work. Dell XPS L702X

  Hello, I am new to this forum.

  The function FN + F3 that disable the Touchpad does not work, my laptop Dell XPS 17 (L702X)

  I googled my problem and the only thing I found was this: http://en.community.dell.com/support-forums/laptop/f/3518/t/19454265.aspx

  I think that my problems with the touchpad started when I plugged a mouse into the USB port. It didn't work (it worked well before), and in material-sound-mouse control panel, the system asked me to uninstall a driver or other. I do not remember, but later the mouse worked.

  After this weird thing with the mouse, I noticed that the touchpad was malfunctioning. While I write, the cursor moves without touching the touchpad, it is annoying because it makes me write bad because he is moving in the middle of writing, as I write so it's a mess.

  The second oddity, the Fn + F3 does not disable the touchpad, the orange light come on (the led on the top of the touchpad), but the cursor can be moved in any case, with or without a connected mouse.

  I checked for driver updates, perform an audit of the system, checked for viruses, spywares and I don't know what I could do. I don't know if the problem with the mouse had nothing to do with the function Fn + F3 problem.

  I have not formatted or re installed windows 7, never.

  In Device Manager I have this:

  -mouse and other pointing devices:-Compatible PS/2 mouse

  Help, please. Thank you.

  DOH! Problem between Chair and keyboard...

  C:\dell\drivers\R289237

  Run the executable file of Synaptics.

  Download of extracts only the program on your disk. You must manually install the driver for the Synaptics touchpad with its own executable.

  FN + F3 now disables =)

• How to: determine the video configuration my Dell XPS M1330 has installed.

  Original title: I need help to find which video configeration installed my Dell XPS M1330.

  I'm going to START, and then click HELP AND SUPPORT, then?

  Hello

  Control Panel - device - Graphics Manager - double click on it to view details.

  Start finding information - in the search box type system - up and double click it.
  Components - display.

  Check with Dell Support, their drivers and documentation online and ask in the Dell Forums.

  Dell support
  http://support.Dell.com/

  Dell support drivers - product manual & warranty Info (left side) - and much more
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  Dell forums
  http://en.community.Dell.com/forums/

  I hope this helps and happy holidays!

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• How to connect an external monitor to a new Dell XPS 13?

  We had two new Dell XPS 13 for users and there seems not to be any video ports as on previous models.  It runs Windows 10 Professional and has a resolution of the internal display of 1920 x 1080.  Looks like there are 2 super speed USB 3.0 ports and possibly a (thunderbolt)? the port?

  I've heard of USB - C, so I don't know if it's that this port a port on the left side, or if his crush.  I googled thunderbolt to hdmi adapter and all the images that I find it always shows a port mini display on one end despite descriptions saying Thunderbolt.

  So what is the best way to get HDMI out on this laptop?

  I just bought an XPS 2016 13 9350 and now know that the only way to connect no matter what monitor what so ever needs a dell docking station or an adapter.  IT HAS NO CABLE THAT CAN BE USED ONLY TO CONNECT THIS LAPTOP TO A MONITOR.

  I am working in three offices and the adapter, I had lasted 2 weeks before burning and it was the second.  20% of the forum posters have the same problem using a doc $200 now.  It is $600 for 3 offices, I have been working in if I don't want to carry a doc that is heavier than the laptop!

  Who, in their right mind to product management Dell would do a lightweight laptop that had no option to connect a monitor with just a cable.  Why they could not also include a DP or HDMI port or stay until there was a cable is nuts.  It STINKS for us but ideal for Dell they can now sell docs a lot more than ever before.

  I asked to return the laptop and get a surface or a lenovo and our IT group is frantically looking at them with more new employees coming on board. No cases were going docs $ 200 dozen. We have been dedicated company dell, but not anymore.

• How to install in my Dell XPS 720 H2C cooling system?

  I have a Dell XPS 720 and I want to put inside H2C cooling system, but I can't find where the power cable from the cooling system is going.

  When everything has failed, read the Manual.

  #26 on the motherboard, page 89.