Similar Questions

• Creation of a library project in Eclipse using a 3rd party library

  Hello

  I am new to BB development so I hope someone can help me please. I develop my BB application using the plug-in for Eclipse 1.1.2 BB and Eclipse 3.5. I have a master project of UiApplication and some other type lilbrary projects that my main application is dependent on. However, I now need to use a third-party library. I added an external jar file to the main application and if he compiled I get an error when I tried to run in a simulator that the module is not found.

  So my main question is how to do, you use a third-party jar file? I searched the forums and found tips using Ant tools but I prefer to do it in the breast of eclipse or a tutorial, but this implies to use BB IDE but I would perfer to use Eclipse. I thought about it and found a suggestion to create a library project using the 3rd party jar file, but how does that happen? I added a lib folder to a project and the jar file, but I still had to add the jar file to my main application's java build path. To remedy this, I added the jar file in a src folder and made my main application dependent on the library project. However, when he tries to build it said the auditor does not, but I don't know where it is called for.

  I have a jar, cod and alx and jad for a third file. Please help, I am sure that this should be much easier that it turns!

  Since you already have the cod file, you can manually load the file of cod for your library of third party on the simulator by clicking the file menu in the upper corner of the Simulator window.

  Afterwards, when the deployment you need to regroup cod library third party distribution with your application folder AND add the additional appropriate lines in the making .jad file.

  (You need permission to do with third-party library).

  If you need to compile the .jar file in a .cod file so you can find instructions to do it here: http://developers.sun.com/mobility/midp/articles/blackberrydev/#4

  I hope this helps.

• Custom component that uses 3rd party library

  Hello
  
  I'm building a custom component that uses a library of party 3rd in the custom filter class.
  I tried to add the jar file to the classpath for the component, I tried to add the jar file to the libpath to the component, but I do not understand to work.
  I simply get a NoClassDefFoundError when the filter is running.
  
  Anyone have experience with the addition of libraries third 3rd in a component custom?
  
  Your help is very appreciated.
  
  Thanks, Arjen
  
  Published by: abuising on November 17, 2008 23:31

  Hello!

  I discovered, that editing the custom through the Component Wizard component classpath does not take effect immediately. You must reinstall your component after such changes.

  I would like to know if it works.

  Jakub

  Published by: j.ciszek on 2008-11-18 10:03

  Published by: j.ciszek on 2008-11-18 10:03

• 3rd party library in c ++ plugin

  Hello

  I write a plug-in in visual studio c ++ for Acrobat X Pro. I use some of the Boost libraries in my project (file system, boost fstream, regex, archive, serialization and timer), and some of them are libraries that need construction, not the libraries 'header only' in shot push.

  Both the target computer running the plug-in libraries boost installed, the plug-in will load and run properly. However, if I try to run the plug-in on a machine without installed, the plug-in will not load. I'm not terribly experienced in a situation like that, so I was wondering if anyone had some advice on the best route to go.

  Do I have to copy the .lib files to the target computer, do I need to build boost on computer target or is it a way I can have the libraries included inside the .api of the plug-in file so I can deploy a single file? Ideally I would like this plugin involved sending only target a single file on the computer, but I could live with copy/paste if necessary .lib files. Creation of libraries of boost on the target computer will probably not happen.

  Thank you.

  Make sure that you test the version of the plugin. The Debug version will not work without installation of Visual Studio.

• Using the third-party library

  Hello, I intend to use the 3rd party library in my application of cascades .

  I downloaded from GitHub and I compiled and generated the libNAME.so file.

  How to use this library in my application? - This could someone guide me please? I reading the articles, but it is not clear enough.

  Thank you!

  No, the file is somewhere else, I put it in a lib folder, but it is still linked with the full path, do not know if you can change that a relative path somehow, as is the PRI of the file that is automatically generated.

  the include directory has files of header in my case

• I can't open select Library of Photos photo of 3rd party app. Will receive access the pictures library to open the library file is grayed out

  OS X 10.11.1 pictures 1.2

  When I try to open the photo of the order open menu file of 3rd party apps (for example, an application in edition on my hard drive or on the web) and access my library of Photos, the library is either gray out and inaccessible, or it is not grayed out, but when I select it it does not e access to individual photos, but instead tries to open the entire library. How to select individual photos, modify or download programs on the web?

  You don't ever open the photo library - you use the browser to media at the bottom left of each window of download/tie/open under media ==> photos--> Photos

  LN

• Addition of Google Chrome, now Safari does not open, impossible to link electronic mail links.  Just received message "Safari is closed."  Tried deleting 3rd party add ons. Is went into preferences, Safari is the default browser, but it does not open.

  Add Google Chrome, now Safari opens Cannot link e-mail links.  Just received message "Safari is closed."  Tried deleting 3rd party add ons. Is went into preferences, Safari is the default browser, but it does not open.

  Third party extension and plug-ins?

  If Safari is slow, unresponsive, which closes unexpectedly, or has other issues

  The problem may be caused by a Safari Extension, Internet plug-in or another add-on.

  The safari Extensions, Internet plug-ins, and other modules are designed to improve or customize the browsing experience. Modules are widely available on the Internet, and some are installed as part of an application or other software. If you have Add-ons installed, an add-on might be at the root of the issue.

  If the problem is the unwanted pop-up windows, advertisements and graphics while surfing on the web, discover how to remove the ad-injection (adware) from your Mac software.

  Disable the Safari Extensions

  You can disable Extensions Safari to learn if all are causing the problem.

  1. In the Safari menu, choose Preferences.
  2. Click the Extensions icon, and then select an extension from the list.
  3. Uncheck the box enable disable this extension.

  If turning off an extension solves the problem, look for updates of the extension by clicking Update in the lower left corner of the window. Or remove the extension by clicking on the button uninstall.

  Remove Internet plug-ins and other add-ons.

  You can remove Internet plug-ins and other add-ons to see if everything is the origin of the problem. To find them, quit Safari and open these folders in library:

  • The library folder at the top level of your hard drive. Open it from the Finder by choosing go > go to folder in the menu bar. Then type /Library and then click OK.
  • The record library in your home folder. Open it by organizing the Option while choosing go > library in the menu bar.

  The folders in the library contains the following folders for modules. Move all the files in these folders to the trash.

  • Internet Plug-Ins
    Do not remove the default Browser.plugin, nslQTScriptablePlugin.xpt, Composer.webplugin of Quartz or QuickTime Plugin.plugin.
  • Input methods
  • InputManagers
  • ScriptingAdditions

  If the removal of the files in these folders solves the problem, quit Safari again and gradually put the files until you find the one at the origin of the problem:

  1. Open the Recycle Bin and select one of the files that you removed. Chose file > back up. The file back to its folder.
  2. Open Safari and see if the problem returns.
     • If the issue is returned, you have identified the add-on causing the problem. Do not use or contact its manufacturer for an updated version.
     • If the question does not return, quit Safari and put back another file.

• How do I share files on Xbox 360 without Windows Media Player or 3rd Party applications

  Windows 7 sharing media files to the xbox 360 without media player

  I know that I can use Media Player 12 in windows 7 to share files on xbox 360 using the libraies, but I used to be able to share without media player and I would like to be able to do it again, but I can't seem to get my shared folders will appear on xbox. I don't know if I need to use folders to share public or not, but someone has all the answers on this for me?

  I use my xbox 360 to watch the video content streamed from my PC pretty much every night through a continuous connection to the xbox. You do not need Media Player or any other 3rd party application to video media IF THEY ARE THE RIGHT SIZE for a XBOX, you just need the PC configured for videos, turned on and networked with the xbox

  It is simple and quick, and depending on the content, there are two methods that I use:

  (1) as Etzel42 has described - in Windows 7 Control Panel > network and sharing Center, go to Advanced sharing > Media Streaming, select "chose the flowing media options...» ». If the Xbox 360 is running and put in place on the same (Local) network as the PC it will be displayed here but the value "blocked." Just change "Authorized" and click ok. (If you do not see the Xbox 360 listed here then the Xbox and PC cannot see each other on the network. You must address this issue before anything else).

  Once that streaming media is running, the video files you want to share with the Xbox is in addition to your video library. This can be done in en allant going to the computer, right-click on the 'Vidéos' library, go to 'Properties', then include the video or files to share. As a double check that all video files are available for the Xbox, open Media Player and see if he can see all the files/folders that you added. Close Media Player now, you do not need it works for watching videos on the xbox

  Now, go to the Xbox, go to the dashboard in my Xbox and video library. You should see the name of your PC as a selection. Open it and then open the folders that you added to PCs video shops and once again, if media files are in the right play on the Xbox, watch now format!

  (2) configure the Xbox Extender and Windows Media Center, and then run Media Center on the Xbox, this will allow you to play any kind of media format on the Xbox that you can play on the PC. It is ideal to play the Xbox formats cannot be opened natively too, it's pretty darn picky.

  In both methods you have not need of any application is running on the PC. Simply be turned on and available for the Xbox via the network. The Xbox will do the rest. In fact, one nice feature of the library on the Xbox 360 is that if your PC is in standby (Sleep), Media Center will wake up the PC.

• How to get the Media Player 12 to support id3v2.4 tags either directly or indirectly using a 3rd party plugin.

  original title: id3v2.4 MP3 tags

  Hello

  someone knows how to get Media Player 12 to support id3v2.4 tags, either directly, or indirectly using a 3rd party plugin. I use a program (Traktor Pro) which is a djing software. It reads my music library and writes specific tags such as BPM id3v2.4 format for MP3 files. After that, WMP cannot display MP3 tags because it seems that you can not read this latest version of id3 standard (which incidentally seems to be interrupted since 2000). End result is that any MP3 in the library seem to be corrupted / lack of tags in WMP12 after being accessed by Traktor Pro

  See you soon

  Shane

  Mr. Gonk,

  WMP and WE can read mp3 2.4 tags but can not write them.

  ERGO WMP works with 2.4 tags. So where is the problem?  Personally I use a 3rd party editor to write tags (more powerful and you can do more things).

  My 2 Euro cents

  See you soon,.

  Jerry

• How can I include some 3rd party libs who do not Bundle-SymbolicName

  While developing a vSphere service Web Client Plugin that uses some 3rd party jar files that I am able to use jar files for debugging on the server of the Virgin by listing them in the "Bundle-ClassPath' of the file manifest.  But when I followed the instructions to deploy the plugin, vSphere package Manager Client does not include the 3 jar files of party in the jar of service.  Read further, it seems you need to add the address 3rd party jar files separately, but 3 party jar files need to have a "Bundle-SymbolicName" defined in their manifest files to list them in the file plugin - package.xml '< bundlesOrder >' 'bundle <>' tags.

  Unfortunately, the authors of 3rd party Java libraries did not specify a 'Bundle-SymbolicName"for their jar files, so does anyone have an idea on how to include these 3 party in my deployment package jar files?

  I tried to add a 'Class-Path' with a list of jar files in the manifest file of the service (in various configurations).

  My last resort is to modify the manifest files jar 3rd party files (by adding the "Bundle-SymbolicName" to them), but I really don't want to change the 3rd jar part files.

  Any help would be appreciated...

  Thank you

  Steve,

  3 third-party libraries can be "OSGI-enabled" using a tool like bundlor, see the FAQ "how package a library as a beam Initiative?" in the SDK documentation.

  Another way to solve this problem is to "inline" (or nest) the library inside your own bundle of plugins:

  (1) package your plugin - service.jar to include the library in the root of the file .jar for example.

  (2) add the following line to your java package manifest:

  Bundle-ClassPath:., my3rdPartyLibrary.jar

  This indicates the osgi framework to find resources firstly in the current grouping (where the "."), then in the my3rdPartyLibrary.jar integrated

  You can nest several libraries like this using a comma separator, and you can also keep them in sub directories as Bundle-ClassPath uses the correct relative paths.

  The advantage is that you don't need to change 3rd-party libraries which are not active OSGI and process Import-Package.

  The disadvantage is that there may be a memory and performance costs when running because the framework to develop Inline jars, etc..

• I have some 3rd party widgets I want to use with Muse. When I try to import this Muse gives an error: 276 (number of unexpected format. Check if there is a newer version of Muse). My current version of the Muse is v7.4 please guide properly.

  I have some 3rd party widgets I want to use with Muse. When I try to import this Muse gives an error: 276 (number of unexpected format. Check if there is a newer version of Muse). My current version of the Muse is v7.4

  Please guide properly.

  I use a 64-bit computer. I discovered the widgets were not made for earlier versions such as v7.4 had no 'library' to import these widgets to.

  Thanks for the reply but. I appreciate it.

• CineForm and other plugins 3rd party for creative cloud, what happened to them?

  Hi, I don't want to panic, but I just downloaded Adobe first CC and it tells me that I have made my previous project with a 3rd party plugin that is not available. What is the installation process of my plugins 3rd party for the first so I can edit with codecs, Blackmagic, Cineform and several others that I enjoyed helping the CS6.

  Hi scarolan, since you have answered Rallymax, it seems that you re-run Setup from Cineform.  If it seems so, at least in your case the Cineform Installer did not your new installation CC of the body.   It depends on third-party plug-in installer to find the correct folders, or to offer an option where the user can choose an installation path.

  Here are some of the paths for Agency CC:

  Common plugins: C:\Program Files\Adobe\Common\Plug-ins\7.0\MediaCore\

  The sequence presets: [Adobe Premiere Pro installation path] \Settings\SequencePresets\

  Preview of sequence presets: [Adobe Premiere Pro installation path] \Settings\EncoderPresets\SequencePreview\

  Common exporter presets: [User folder]\AppData\Roaming\Adobe\Common\AME\7.0\Presets\

  Effect presets: [Adobe Premiere Pro installation path] \Adobe Premiere Pro CC\Plug-ins\Common\

  Each plugin can have its own library dependencies (DLLs on Windows), license files, presets, etc.  If you are familiar with a certain set of plug-ins, you can try to copy on to CC CS6 files.  However, it is quite easy with sets of plug-in more complicated that you miss some files.  Even with all the files in place, whether or not the work of plug-ins like before depends on how everything connects under the hood.  It is like taking a part of your old model car and try to use it in a new model.  More integration, more something could have changed which requires a new "room".

  With all the foregoing said: the recommended way to install a set of plug-in for CC organization is re - run the last install plugin which must support CC.

• Quarter playback controls when the 3rd party app plays

  When a 3rd party application plays on my iPhone (Audible, Castro,...), my Apple Watch does not show the playback controls to it. Wait for the watch to show the same controls as the control center on my iPhone. But it shows a Play button and gray < <>> / buttons. Volume controls work well and when I press the play button, the 3rd party app is dimmed and the iOS app music begins to play.

  I'm doing something wrong?

  iPhone 6 s more - iOS 10.0.1

  Apple Watch series 2 - Watch OS 3.0

  Hello

  Audible or Castro iPhone applications currently include an app for Apple Watch:

  • Sound: https://itunes.apple.com/us/app/audible-audio-books-original/id379693831?mt=8
  • Castro: https://itunes.apple.com/us/app/castro-play-share-podcasts/id1080840241?mt=8

  I suggest that you see the respective developers support resources and/or consult the developers directly on the contribution of functionlity for their applications on Apple Watch:

  • Sound: http://audible.custhelp.com/
  • Castro: http://supertop.co/castro/press/#contact

• Hi people. Intend to purchase Apple Watch USA and use it in Europe. Will this be a problem? Can I use only a simple switch of 3rd party? I'm going to hurt same hardware or software?

  Intend to purchase Apple Watch USA and use it in Europe. Will this be a problem? Can I use only a simple switch of 3rd party? I'm going to hurt same hardware or software?

  Hello

  You will be able to use the watch in Europe.

  There is no regional differences in the hardware and the software can be configured to your chosen region. The supplied USB power adapter will have to pine trees located in the United States. A travel adapter will allow you to connect it to the European outlets.

  Alternatively, you can buy an Apple USB power adapter that is located in your country of destination / country.

  For example:

  • 2-pole:
    • http://www.Apple.com/FR/shop/product/MD813ZM/A/Adaptateur-secteur-USB-5-w-Apple? FNODE = 83
  • UK 3-pin:
    • http://www.Apple.com/uk/shop/product/MGRL2B/A/Apple-5W-USB-power-adapter-folding - pins? FNODE = 83

• Can I install 3rd party in the iPhone?

  How to install Firefox and other applications 3rd party on iPhone?

  3rd party is not possible unless you jailbreak which is not recommended.