Dependency is not configured in the resource schema error (OSB)

Similar Questions

• Addiction is not configured in the resource schema. Error in EPCO

  Hi all
  
  I get the following error when I try to import a URL scheme.
  
  * "Dependence is not configured in the resource schema. Reason possible import / include one or more aren't together *.
  
  * correctly. » *
  
  If I copy the xsd in my project I get no error. Can help a whole on how to configure dependencies in EPCO?
  
  Thank you
  Arun

  There was a download function in the workshop of 10g and 11 g, it seems to be there-

  Dependency is not configured in the resource schema error (OSB)

  sbconsole is the only option left now, otherwise you may need to manually update the EPCO import SchemaLocation attribute.

  Kind regards
  Anuj

• The system logging is not configured on the "host"hostname"

  Hi all

  I just install the VMWARE ESXI, 5.0.0 on a hp DL380 G7 Server everything went well, but via Vsphere client, I summarized my host tab the WARNING «Laa system logging is not configured on the "host"hostname".»

  Pour installer I i info on card kind sd server a drive to keep pour VM

  anyone it an idea?

  Thanks in advance

  RRaph

  Hi RRaph,

  Look in this KB if you find no useful info:

  • http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=2007658

  A +.

  Franck

• Storage VMotion - a general error occurred: could not wait for the data.  Error bad0007.

  People,

  I searched through this forum and have not found an answer that works in many positions out there, I say to myself that I would ask him once again.

  Here's the context:

  We have 12 identical Dell M600 blades in 2 chassis with 16 GB of Ram, 2 x Xeon E5430, they are all connected to an Equallogic PS 5000XV iSCSI SAN on a separate iSCSI (vswitch1) with 2 cards network dedicated network and dedicated switch, console svc iscsi dedicated, dedicated VMkernel port for iscsi access. Net access (vswitch0) contains port groups VM for our various networks and a console port and vmkernel svc for VMotion with 2 separate NETWORK cards as well.

  We are running ESX 3.5 U3 and VCenter 2.5 U3 on Win2k3 R2

  VMotion works between all servers, Storage Vmotion works for most machines, HA works and the value 2 host failurs with no monitoring of vm, DRS is set to manual for now I have a few machines on the local stores that I complete my rebuilt LUN, there is no set of rules for DRS and VMware EVC is enabled for guests of the Intel. However, I'll just describe one machine to do svmotion below.

  Here's the problem:

  I'm trying to Svmotion via svmotion.pl - interactive, a Machine to Windows 2000 with a virtual disk and a virtual RDM. I am aware of the requirements for the RDM and required parameters for svmotion, independent is not selected for the RDM, and I also have svmotioned several machines linux and win2k3 with the same configuration without problem. In the interactive session, I choose to individually place the disks and I chose the virtual disk to only the virtual machine to be moved, essentially, as I saw it move vdisk virtual machine and then copy to the pointer of the RDM.

  The use of the processor in this machine is about 25% average. but I try to run migrations at the time the lowest. and The Host it itself shows only about 5.5 GB of the 16 GB of RAM used. so I think we're good on the RAM. the volume/datastore that I'm migrating from has 485 GB free and the volume/datastore I migration towards a 145 GB free. the VM virtual disk is only about 33 GB.

  I run the script the windows version of the RCLI svmotion. and when to begin the process, I get the following error at around 2 percent of the progress:

  "Since the server has encountered an error: a general error occurred: could not wait for the data."  Error bad0007. Invalid parameter. »

  After searching around, I found the following hotfixes to the U2 release notes

  • Migrate.PageInTimeoutResetOnProgress: Set the value to 1.

  • Migrate.PageInProgress: The value 30, if you get an error even after the setting of the Migrate.PageInTimeoutResetOnProgress variable.

  I've made these changes, and I still get the same error.

  When I dig in the newspaper, I see these entries in the journal of vmkwarning:

  (Feb 24 00:17:32 vmkernel iq-virt-c2-b6: 82:04:13:56.794 cpu4:1394) WARNING: bunch: 1397: migHeap0 already at its maximumSize bunch. Cannot extend.

  (Feb 24 00:17:32 vmkernel iq-virt-c2-b6: 82:04:13:56.794 cpu4:1394) WARNING: bunch: 1522: Heap_Align (migHeap0, 1030120338/1030120338 bytes, 4 align) failed.  calling: 0x988f61

  (Feb 24 00:17:32 vmkernel iq-virt-c2-b6: 82:04:13:56.794 cpu4:1394) WARNING: migrate: 1243: 1235452646235015: failure: out of memory (0xbad0014) @0x98da8b

  (Feb 24 00:17:32 vmkernel iq-virt-c2-b6: 82:04:13:56.794 cpu2:1395) WARNING: MigrateNet: 309: 1235452646235015: 5 - 0xa023818: sent only 4096 bytes of data in message 0: Broken pipe

  (Feb 24 00:17:32 vmkernel iq-virt-c2-b6: 82:04:13:56.794 cpu6:1396) WARNING: migrate: 1243: 1235452646235015: failed: Migration protocol error (0xbad003e) @0x98da8b

  (Feb 24 00:17:32 vmkernel iq-virt-c2-b6: 82:04:13:56.794 cpu2:1395) WARNING: migrate: 6776: 1235452646235015: could not send data for 56486: Broken pipe

  At this point, I'm stuck... What is Windows RCLI? the vcenter Server? or the service console with not enough of RAM? We have already increased all our consoles service 512 MB...

  Any help would be greatly appreciated...

  Thanks in advance.

  Alvin

  The vmkernel on out of memory error, I had that before. And vmware support recommends setting 800M Max service console memory. And I did it and have no problems after that.

  See if that helps the issue.

  Mike

• No matter how much hard drive space or size is not displayed. It says hard drive is not accessible and the cyclic redundancy error.

  * Original title: hard drive problem

  No matter how much hard drive space or size is not displayed. It says hard drive is not accessible and the cyclic redundancy error. When I try to format it, it says windows could not finish.

  What just happened? How can I solve this problem?

  It says hard drive is not accessible and the cyclic redundancy error. How can I solve this problem?

  Sorry, you can not. A CRC error means that there is a serious problem with your drive. You need to replace it.

• string not found in the resources of the library

  I use the example of Simple operator Interface OR front end to my test sequences. Everything works fine on a development PC, but when I create an installer using TestStand2010 and put the software on a desktop deployment, the software works, but in the pop standard OR for "UUT enter serial number" and the pop-up completed test result, all normal text is replaced by "string not found in library resource.

  I have enough course that I must be missing some files in config or dll OR standard in my build Teststand script. Anyone know what files it Miss?

  Thank you

  Ian

  Ian,

  you missed to deploy the language on the target files. The dialog box is configured to read the appropriate string from the file 'ModelStrings.ini' to allow the translatation to the user interface. Please make sure that the target system has all the available language files (default is English only, but you can create your own translated labels included)

  hope this helps,

  Norbert

• Keyboard not configured by the new virtual machine

  Hi Experts,

  I am very new to VMWare stuffs. Recently, I've converted a physical machine (windows XP) machine virtual with VMware Converter v3.0.0 by using the Import of machine function and then configured using the configure machine button. I don't change any customization of the virtual computer. Now I have a VM (virtual machine workstation 5.x) of the PC. So I closed the physical computer and starting the virtual machine on a different computer using VMware Workstation v6.5.1. When you start the virtual machine appears "your guest operating system is Windows XP and you have one or more virtual SCSI peripheral isntalled in your virtual machine. Please be aware that XP does not support the BusLogic SCSI adapter that VMware workstation is currently using for virtual peripherals... Download the driver... ». I press OK to continue.

  Now, VM, boots and to connect, I press altcltinsert but VM is not recognizing this command. Only the mouse running inside the virtual machine as I can drag the message autour window, but not any command of the keyboard. So, I am struck at the login page of the virtual computer window.

  A tip for the login and the keypad?

  Thank you.

  Stop VM, between in his option material vitual to version 4 (used in Workstation 6.x) and re-install VMTools.

  StarWind Software R & D

• Satellite A210-171: CD does not work and the WEIRD 19 error code

  Hello

  I tried to run a cd that came with my sony walkman but the cd does not work
  I went to Device Manager and noticed that there is a yellow triangle of information to the: TSSTcorp CDDVDW TS - L632H ATA Device

  It has a messege when I try to update the driver
  (Windows cannot start this hardware device because its information for configuration (in the registry) is incomplete or damaged (Code 19))

  Any suggestions please?
  Is there a free driver scan and repair maybe tool?

  Thanks in advance

  Post edited by: sounds

  Hello

  The solution is very simple;
  First of all, remove the drive from Device Manager CD/DVD.
  Then start the registry and delete the Upperfilters and Lowerfilters completely from the following registry key values:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  After that reboot the device, wait that the OS has acknowledged again the STRANGE and finally test.

• "Failure of configuration of the windows updates". error: WindowsUpdate_80070003 / 0 x 80070003

  Original title:

  "Failure of configuration of the windows updates".

  Hello

  I use Windows 8 and updated to 8.1 last month after graduating from the messages on HP laptop. As soon as I updated to 8.1 it stopped working correctly. It has become very slow and I was unable to perform any task. I went back to Windows 8, once I had this option. Since then, I get this error message «Failure of configuration updates windows.» Restoration of the changes. Do not turn off your computer. »

  I also tried the clean boot troubleshooting mentioned here: http://support.microsoft.com/kb/929135

  However, I get this error: WindowsUpdate_80070003 / 0 x 80070003

  Please help ASAP!

  Hi John,.

  I will try to help you with this question.

  Thank you for the information provided. Coming to the question I would like you try these steps and check if that helps.

  Method 1:

  Try the steps from the following link and check if that helps.

  Error code Windows Update '0 x 80070002' or '0 x 80070003 '.

  If you still experience the issue after trying the steps in the above link, try the following steps:

  Method 2:

  See the following article try the steps that you have not yet tried and check if that helps.

  Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates

  http://support.Microsoft.com/kb/949358 

  Note: Follow How to reset the computer to start as usual after a clean boot troubleshooting article KB929135 to reset the computer in normal mode. Also when you do the system restore, you will lose data and the programs that are installed on the date you make the system restore.

  Make sure that you back up the data on the computer before performing all the troubleshooting steps.

  Method 3:

  If the previous step fails then please go ahead and try the following steps:

  I suggest to rename the pending.xml file, and then change the registry.

  a. boot from the DVD of Windows 8.

  b. click on repair your computer.

  c. click Troubleshooting, and then select Advanced Options.

  d. Select the prompt option.

  e. Once you open the command prompt, enter the following command and press ENTER.

  f. type cd C:\windows\winsxs, and then press ENTER.

  g. type ren pending.xml pending.old, and then press ENTER.

  h. system cannot find the specified files

  i. type regedit and press ENTER.

  j. select HKEY_LOCAL_MACHINE.

  k. on the file menu, click on load the hive.

  l. find the following folder:
  C:\windows\system32\config\components

  Mr. When you are prompted for a name, type Offline_Components.

  n. in the registry editor, locate and delete the following registry subkey:

  HLKM\Offline Components\AdvancedInstallersNeedResolving
  HLKM\Components\AdvancedInstallersNeedResolving
  HKLM\Components\PendingXmlIdentifier
  HKLM\Offline Components\PendingXmlIdentifier

  o. quit the registry editor, type exit at the command prompt, and press ENTER.

  p., click on restart.

  
  Note: the steps mentioned below include editing the system registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  Please return to the State of the question.

• Get a "not connected to the home network" error while trying to print

  * Original title: printer problems

  Hello I have a HP Officejet Pro 8600 that I bought at Best Buy, and I have printer problems, I ran the troubleshooting on my control panel from my computer and it says that it is not connected to the home network which can do on my end to fix, I'd appreciate any help, thank you very much!

  Hi John,.

  I will certainly help you in this matter.

  -Have there been recent changes made on the computer before the show?

  Method 1: Run the Microsoft Fix and check.

  Diagnose and automatically fix problems printing and printer

  http://support.Microsoft.com/mats/printing_problems/

   

   

  Method 2: update the printer drivers and check.

   

  Find and install printer drivers in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

   

  Update drivers: recommended links.

  http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links

   

  For more information, see the links.

  Printer network problems (applies to Windows 7)

   

  http://Windows.Microsoft.com/en-AU/Windows-Vista/troubleshoot-network-printer-problems

   

  Why can I not print?
  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  If the problem persists or you have any other questions, do not hesitate to let us know. It is our pleasure to be of service.

  Thank you.

• My Windows Vista download updates and seem to install but do not configure when the computer restarts. Clues about the problem?

  This has happened since April 12, but I'm just now "getting it." no error messages or numbers.   I saw something on NVIDIAnForce 10/100 Mbps Ethernet problem in another context?

  Hi donorann,

  ·         Did you do changes on the computer before the show?

  ·         Updates (KB numbers) you are trying to install?

  ·         The updates are installed successfully?

  View the history in Windows Update in Control Panel window, or go to installed updates:

  Open installed updates by clicking the Start button, click Control Panel, click programs, and then under programs and features, click view installed updates.

  Follow the steps in the article.

  Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates

  Note: You must take the backup of the data before performing any installation of windows.

  For reference:

  You cannot install some programs or updates

  Understand the automatic Windows Update

• Simply receive 13 (disc boxed) installed, but I can not configure. The code on the box is not recognized, and of course the Adobe ion line support is unavailable. Doing anything this weekend seems to be a total waste of time.

  I recievd my 13 new items today. Installed from the disc, but need an installation code. Thre is a PSE code at the back, but the paintings does not recognize the code. Of course Adobe is not available when necessary.

  Quickly find your serial number

• vSphere is not usage of the resources view after adding host memeory

  After the host memory upgrade, vSphere isn't the usage view resources on the summary page or virtual machines. This information is collected from Virtual Center? Everyone knows about this problem before?

  

  seems to me that you just need to restart the management agents.  If you have a SSH access, you can issue the command below

  services.sh restart
  

  .. .or the DCUI, F2, connect - options - troubleshooting restart management agents.

  Finally, if you disconnect / connect the host to vCenter which might work as well.

• My HP officejet J3680 is not configured for the fax. I want to just make a copy of a document.

  I use my J3680 to make quick copies.  I don't want to connect to the fax phone line or my computer.  I can't find my old manual.  I just want a casual copying.

  Hi Kate,.

  It seems that, you need the User Guide of HP Officejet J3680 all-in-One Printer.

  Refer to the following and download it.

  User guides for the range of all-in-one printers, HP Officejet J3680.

  http://h10025.www1.HP.com/ewfrf/wc/manualCategory?cc=us&DLC=en&LC=en&product=3441026&

  I hope this helps.

• Configuration for the Task Manager error

  Hello
  
  I installed FDQM, IR, FR, HFM in 11.1.1.3.
  
  FDQM configuration is successful. When you configure the Task Manager using the user name Windows account
  
  (Administrator). But it shows the status parameter not valid error. Once again, I tried with DCOM user admin also.
  
  It throws the same error.
  
  Thanks and Rgards,
  Sidhartha.p

  Try this:

  (A) start > run > services.msc
  (B) locate the FDM Hyperion Service Task Manager, right click and choose "Properties".
  (C) click the 'Connection' tab and enter the FDM Service account user name and password as - and apply.
  (D) try to start the service.

  It work?