Deploy applications

Similar Questions

• Writing to a file that is packaged in the deployed application (part of the COD file)

  Hello

  Thanks RexDoug, I got the link that shows how to read a config/prefs file included in the application code that I'm deployment.

  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800332/800620/How_To _...

  However one thing, I realized that I also need to write to this file, so my question is: is it possible to also write to a file included in the deployed application? If so, any tips/sample code would be greatly appreciated.

  Kind regards

  Sean.

  Similar question on writing a file on SD card in this thread:

  http://supportforums.BlackBerry.com/Rim/Board/message?board.ID=java_dev&thread.ID=55847

  I would use the name/value pair in PersistentStore approach to do this, which saves the duty serialize into a stream of bytes output to write the file.

• Problem when deploying application to the IOS Simulator!

  Dears

  I have faced the following error when you try to deploy application (oracle application example) on iOS Simulator

  [22: 45:01] undeployment.

  [22: 45:01] - incomplete deployment.

  [22: 45:01] failed to deploy on the iOS Simulator.

  [22: 45:01] deployment failed due to one or more errors returned by 'osascript '.  What follows is a summary of the returned error:

  Command-line execution failed (return code: 1).

  I use Xcode 6.1 and JD 12.1.3

  Thank you

  Dears

  I solved this problem by reinstalling Xcode worm 5.1.1

  Xcode 6.1 is not compatible with the MAF so far

  Thank you

• Deploying applications in vCAC

  To deploy applications in the templates, you can use Application Director. What are the tools outside enforcement Director do or can be used to deploy and configure applications such as SQL and Sharepoint automatically?

  What are the advantages and disadvantages of the tools?

  Looking forward to hear from you.

  Hello

  You have two options for what you describe, if you talk to a single instance without dependencies, then Application Director is a bit exaggerated.

  1 - use the comments vCAC agent to install the software.  This has the advantage of easily integrate with your deployments and works out of the box.  The requirement is that you have scripts ready to manage a facility without application support.  However, for the two apps you mention, these can easily be found on the Internet.

  2. use vCO workflows.  It really is my favorite because it does not keep the guest agent installed on a base image, it's a little more extensible than the agent of comments.  You'll also need scripts Unattend for this method, and this method works better with virtual machines VMware running VMtools (so that the vCO can launch scripts on the guest).

  3 puppet/head/salt.  These have the advantage of having very large repositories of content to deploy applications.  You just have to find the officer appropriate running on your computer and the configuration management solutions do the rest (and more).  This also has an advantage over #2 that you are not limited to VMware virtual machines.  Drawback is the rise of time to evaluate, select, learn and deploy these but I think in the long term, that worth the effort.

  So, you have a few options here.  Don't forget that you can use all these depending on the use case.  For example, vCO or the vCAC comments Agent can be used to install the agent of the puppet and then the puppets will do the rest.  For an example of what I'm talking about you, see blog of Ryan Kelly on the use of charm vCO with vCAC.  http://www.vmtocloud.com/self-service-application-deployment-with-Vcac-VCO-and-Chef/

• Orchestrator can be used to deploy applications in virtual machines?

  Hey guys,.

  It is a matter of general features.  I spent a few hours trying to figure the best technology to use for deployment of applications within virtual machines.  It looks like vFabric Application Director would be the * best *, but I am also looking to vCenter Orchestrator.  He seems mature, but I don't know if it can be used to deploy applications within a virtual machine (for example, install IIS in a Windows Server 2008 VM).

  Any input would be appreciated, marketing white papers are not totally clear!

  Thank you

  Drew

  You can use the workflow operations comments to run commands install or a complete script to do. This says that you can also use vCO to orchestrate the Application Director as part of an workflow provisioning of end-to-end.

• List of deployed applications. Different results for different hierarchies of MBean

  Hello

  When I list deployed applications, I get different results depending on what hierarchy MBean I question:

  • serverConfig():

  wls:/MY_WEBLOGIC_DOMAIN/serverConfig> listApplications() APPLICATION_1APPLICATION_2
  

  • domainRuntime():

  wls:/MY_WEBLOGIC_DOMAIN/domainRuntime/AppRuntimeStateRuntime/AppRuntimeStateRuntime> ls()
  -r--   ApplicationIds                               java.lang.String[APPLICATION_1, APPLICATION_2, APPLICATION_3]
  

  No idea why is APPLICATION_3 in the list?

  
  

  Thanks in advance,

  Luis

  
  

  PS: if I apply directly to the managed server:

  wls:/MY_WEBLOGIC_DOMAIN/domainRuntime/ServerRuntimes/prodGAD_1> ls('ApplicationRuntimes')
  dr--   bea_wls9_async_response
  dr--   bea_wls_cluster_internal
  dr--   bea_wls_deployment_internal
  dr--   bea_wls_diagnostics
  dr--   bea_wls_internal
  dr--   APPLICATION_1
  dr--   APPLICATION_2
  

  Hi Vijaya,

  Thanks for your reply, yes you are right, my config.xml file I see this request:

    
      APPLICATION_3
      ...
      ear
      ...ear
      DDOnly
    
  

  But now that I read your response, I already rebooted the AdminServer. This new beginning has resolved the problem.

  Thank you

  Luis

• Deploy applications on the linked clones

  Hello

  I want to deploy applications to our SCCM server at our VDI Windows XP machines

  If I do a redial or refresh the requests of course will disappear.

  So, I think, if I've never done a refresh or redial this will work.

  I will make sure patches as well.

  What is the right way to do it? or clones will grow so big, I can just as well use complete clones?

  Stefan.

  It's a small world... ;-)

  Well yes it does, which is why we recommend to use some sort of application virtualization to bring the request to the desktop in a very efficient way, a very good one is actually included in the original notice of license. (hint, hint...)

  If you want to have a conversation about this, feel free to give me a call.

  Linjo

• Best option for mass deploy application on sbRIO-9602

  Hello

  I need to deploy the application to a large amount of LabVIEW rt ' sbRIO-9602. What would be the best way to go about this?

  All RIOs will have an identical configuration.

  Pilots on the RIO software must be upgraded to the latest version.

  Downloaded bitfiles FPGA.

  Created folders and files downloaded via FTP.

  All resources specific I should look?

  Take a look at this .

• Data transfer Ethernet fails on deployed Application RT

  I wrote a TCP/IP client that interacts with a TCP/IP server on a LAN (cable). I've developed this during a few months on LabVIEW 2014 (no SP1) targeting a cRIO9068 chassis.

  Development went very well, never had any problem Ethernet flaky with LabVIEW. Once I got all the balls I have deployed and went out of the factory.

  Ethernet connects at the factory, but no data is transferred. Puzzled, I reconnected my LabVIEW Development for the chassis machine, opened the project from which the application has been deployed and ran from the project. This works. I see this behavior on the original chassis also, so I have two chassis, which work with the development environment but do not work when it is deployed.

  What's up with that? All ideas appreciated, I can't on this topic in these forums or a general search on Google.

  Thank you

  Bill

  The problem was caused by the execution of the first level VI is the reentrant value framework. I put it to not reentrant.

  With the help of the key has been

  netstat - a

  I saw that demand had several ESTABLISHED connections where alone should be possible.

  Along the way I cleaned up my code a little, but the root cause was multiple instances of the application currently running on the cRIO. If the boot vi is reentrant and then you get an instance when the material starts or restarts, then you get another instance when you launch the front panel on the web. Instead of the Panel connection to the program running, another one is started.

  During the execution of the development environment, that this does not happen. The development environment requires a single run on the top-level vi.

  A shout-out to the people of software OR: a small warning: 'several instances of the program can execute because the first level VI is reentrant' to the start of construction, and add something Panel documentation as "Connect a remote panel based on the web in a VI environment level a second copy of the top-level VI will call" would have saved me a day...

  See you soon,.

  Bill

• How to deploy application BB JDE BB device?

  Hello

  Can anyone give me some advice, how to get my application developed using BlackBerry JDE to work in a BlackBerry device.

  I have the files listed below, how do I get this application working in a BlackBerry device?

  1 LocateApp.jar

  2 LocateApp.cod

  3 LocateApp.jdp

  4 LocateApp.jad

  and a few others...

  Thanks in advance.

  ~ SK

  Hello

  java is fast to deploy the application on the device.

  You can find the javaloader in the bin folder of RIM.

  (1) generate the .cod file

  (2) copy and paste the .cod file in the folder where the javaloader is present. (usually, it is in the RIM/bin)

  (3) open your command prompt and navigate to the path javaloader and type

  load Javaloader u MyApp.cod

  Make sure that the device is connected via USB.

• deployed application projection screen

  Hello

  friends, I am new in the development of bb. Can someone solve my problem. My application runs successfully on the Simulator, but when I deployed it on my bb mobile it will be deployed successfully, but when I click on the application it showing me the Virgin screen.some time it blocks my mobile app .my is webservice application showing data on mobile screen

  my screen push application code is

  try {}
  System.out.println ("testing");
  pushScreen (new SimpleWebServiceScreen());
           
  } catch (Exception exp) {}
  System.out.println ("Error:" + exp.getMessage ());
  exp.printStackTrace ();
  }

  Please help me its urgent

  In the RIM API, there are class EventLogger.

  It allows to connect your app on real device LENGTH.

  To open the log events hold the Alt button on keyboard, and then click LGLG

• Cannot deploy application on an older device

  I'm new to the BlackBerry development. I have developed and successfully deployed an application on a BlackBerry 8100 (AT & T). But I'm trying to deploy it to a BlackBerry 7290 (AT & T) and I get "a fatal error has occurred. in updating the software of your device Please try again. »

  These applications do not use something special. I just tried to deploy the sample "CustomButtonsDemo" on the 7290 and got this error.

  The screen for my old BlackBerry says:

  v4.10.377 (Platform 1.8.0.154)

  Please read the following:

  What is - an appropriate version of the BlackBerry JDE
  Article number: DB-00537

  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800738/800901/What_Is...

  Your "About" suggests you use JDE 4.1, however, if you are targeting devices 7290, I would suggest 4.0.2 or even 4.0, because the first 7290 s devices are out with 4.0.

• Issue during the ADF deployed Application access

  Hello

  I first deployed an Oracle ADF application using 12 JDeveloper and Weblogic 12 c. My application is deployed with next success is the newspaper of JDeveloper.

  [12: 48:49] Application deployment...

  [12: 48:57] [Deployer: 149192] Operation "deploy" on demand "HelloADF_ViewController_webapp" is underway on 'AdminServer.

  [12: 49:19] [Deployer: 149194] Operation "deploy" on demand "HelloADF_ViewController_webapp" managed to "AdminServer.

  [12: 49:19] Application deployed successfully.

  [12:49:20] the constriction of context following URLS have been defined and can be used as a starting point for testing your application:

  [12:49:20] http://IP-Adress:7001 / HelloADF-ViewController-context-root

  [12:49:20] time to deployment: 49 seconds

  [12:49:20]-deployment is complete.  ----

  Now when I access this application using the http://IP-Adress:7001 / HelloADF-ViewController-context-root it gives the following error in the browser. There is no error in the server log file. Please help me solve this problem.

  403 - forbidden error

  Of RFC 2068 Hypertext Transfer Protocol - HTTP/1.1: 10.4.4 403 Forbidden The server understood the request, but refuses to fill. Authorization will not help and the request SHOULD NOT be repeated. If the request method was not HEAD and the server wishes to make public why the request has not been met, it SHOULD describe the reason for the refusal in the entity. This status code is commonly used when the server does not want to reveal exactly the reason why the request was refused, or when no other response is applicable.

  
  

  You must write your name on the page (I write a sample name login.jspx)

  404 means you are trying to call the page but this page was not found in your application.

  The URL should be:

  http://IP-adress:7001 / HelloADF-ViewController-context-root/faces /.

• Deploy application with GlassFish-JavaEE, move from Mac to Linux.

  On a Mac, I developed and managed a Java EE application successfully.

  It's an EAR with an EJB module and a Web module.

  Now continues on a device of Linux (Ubuntu), I can't start over exactly the same application. I got exacttly the same code with git.

  
  

  I tried to launch the application with:

  <

  asadmin deploy ejbEntities/target/ejbEntities-1.0-SNAPSHOT.jar

  >

  the console of administration in the r through http://localhost:4848:

  Applications /-> deploy snapshot.jar selection...

  
  

  And with Netbeans with all the same result:

  After generating with dependencies and running.

  He tells his running successfully. But in services server/glassfish Server/applications/nothing is displayed and the output is the server.log:

  <

  An exception occurred while loading the application: the EJB container initialization error

  com.sun.appserv.connectors.internal.api.ConnectorRuntimeException: Invalid destination jms/NewMessage for MDB: JNDI name not found

  at com.sun.enterprise.connectors.jms.system.ActiveJmsResourceAdapter.getPhysicalDestinationFromConfiguration(ActiveJmsResourceAdapter.java:2269)

  at com.sun.enterprise.connectors.jms.system.ActiveJmsResourceAdapter.updateMDBRuntimeInfo(ActiveJmsResourceAdapter.java:2095)

  at com.sun.enterprise.connectors.inbound.ConnectorMessageBeanClient.setup(ConnectorMessageBeanClient.java:168)

  to org.glassfish.ejb.mdb.MessageBeanContainer. < init > (MessageBeanContainer.java:252)

  at org.glassfish.ejb.mdb.MessageBeanContainerFactory.createContainer(MessageBeanContainerFactory.java:63)

  at org.glassfish.ejb.startup.EjbApplication.loadContainers(EjbApplication.java:221)

  at org.glassfish.ejb.startup.EjbDeployer.load(EjbDeployer.java:291)

  at org.glassfish.ejb.startup.EjbDeployer.load(EjbDeployer.java:99)

  at org.glassfish.internal.data.ModuleInfo.load (ModuleInfo.java:206)

  at org.glassfish.internal.data.ApplicationInfo.load(ApplicationInfo.java:313)

  at com.sun.enterprise.v3.server.ApplicationLifecycle.deploy(ApplicationLifecycle.java:496)

  at com.sun.enterprise.v3.server.ApplicationLifecycle.deploy(ApplicationLifecycle.java:219)

  at org.glassfish.deployment.admin.DeployCommand.execute(DeployCommand.java:491)

  to com.sun.enterprise.v3.admin.CommandRunnerImpl$ $2 1.run(CommandRunnerImpl.java:539)

  to com.sun.enterprise.v3.admin.CommandRunnerImpl$ $2 1.run(CommandRunnerImpl.java:535)

  at java.security.AccessController.doPrivileged (Native Method)

  at javax.security.auth.Subject.doAs(Subject.java:360)

  to com.sun.enterprise.v3.admin.CommandRunnerImpl$ 2.execute(CommandRunnerImpl.java:534)

  to com.sun.enterprise.v3.admin.CommandRunnerImpl$ 3.run(CommandRunnerImpl.java:565)

  to com.sun.enterprise.v3.admin.CommandRunnerImpl$ 3.run(CommandRunnerImpl.java:557)

  at java.security.AccessController.doPrivileged (Native Method)

  at javax.security.auth.Subject.doAs(Subject.java:360)

  at com.sun.enterprise.v3.admin.CommandRunnerImpl.doCommand(CommandRunnerImpl.java:556)

  at com.sun.enterprise.v3.admin.CommandRunnerImpl.doCommand(CommandRunnerImpl.java:1464)

  to com.sun.enterprise.v3.admin.CommandRunnerImpl.access$ 1300 (CommandRunnerImpl.java:109)

  to com.sun.enterprise.v3.admin.CommandRunnerImpl$ ExecutionContext.execute (CommandRunnerImpl.java:1846)

  to com.sun.enterprise.v3.admin.CommandRunnerImpl$ ExecutionContext.execute (CommandRunnerImpl.java:1722)

  at org.glassfish.admin.rest.resources.admin.CommandResource.executeCommand(CommandResource.java:404)

  at org.glassfish.admin.rest.resources.admin.CommandResource.execCommandSimpInMultOut(CommandResource.java:234)

  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)

  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:62)

  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)

  at java.lang.reflect.Method.invoke(Method.java:497)

  to org.glassfish.jersey.server.model.internal.ResourceMethodInvocationHandlerFactory$ 1.invoke(ResourceMethodInvocationHandlerFactory.java:81)

  to org.glassfish.jersey.server.model.internal.AbstractJavaResourceMethodDispatcher$ 1.run(AbstractJavaResourceMethodDispatcher.java:151)

  at org.glassfish.jersey.server.model.internal.AbstractJavaResourceMethodDispatcher.invoke(AbstractJavaResourceMethodDispatcher.java:171)

  to org.glassfish.jersey.server.model.internal.JavaResourceMethodDispatcherProvider$ ResponseOutInvoker.doDispatch (JavaResourceMethodDispatcherProvider.java:152)

  at org.glassfish.jersey.server.model.internal.AbstractJavaResourceMethodDispatcher.dispatch(AbstractJavaResourceMethodDispatcher.java:104)

  at org.glassfish.jersey.server.model.ResourceMethodInvoker.invoke(ResourceMethodInvoker.java:387)

  at org.glassfish.jersey.server.model.ResourceMethodInvoker.apply(ResourceMethodInvoker.java:331)

  at org.glassfish.jersey.server.model.ResourceMethodInvoker.apply(ResourceMethodInvoker.java:103)

  to org.glassfish.jersey.server.ServerRuntime$ 1.run(ServerRuntime.java:271)

  to org.glassfish.jersey.internal.Errors$ 1.call(Errors.java:271)

  to org.glassfish.jersey.internal.Errors$ 1.call(Errors.java:267)

  at org.glassfish.jersey.internal.Errors.process(Errors.java:315)

  at org.glassfish.jersey.internal.Errors.process(Errors.java:297)

  at org.glassfish.jersey.internal.Errors.process(Errors.java:267)

  at org.glassfish.jersey.process.internal.RequestScope.runInScope(RequestScope.java:297)

  at org.glassfish.jersey.server.ServerRuntime.process(ServerRuntime.java:254)

  at org.glassfish.jersey.server.ApplicationHandler.handle(ApplicationHandler.java:1028)

  at org.glassfish.jersey.grizzly2.httpserver.GrizzlyHttpContainer.service(GrizzlyHttpContainer.java:365)

  to org.glassfish.admin.rest.adapter.JerseyContainerCommandService$ 3.service(JerseyContainerCommandService.java:173)

  at org.glassfish.admin.rest.adapter.RestAdapter.service(RestAdapter.java:179)

  to com.sun.enterprise.v3.services.impl.ContainerMapper$ HttpHandlerCallable.call (ContainerMapper.java:459)

  at com.sun.enterprise.v3.services.impl.ContainerMapper.service(ContainerMapper.java:167)

  at org.glassfish.grizzly.http.server.HttpHandler.runService(HttpHandler.java:201)

  at org.glassfish.grizzly.http.server.HttpHandler.doHandle(HttpHandler.java:175)

  at org.glassfish.grizzly.http.server.HttpServerFilter.handleRead(HttpServerFilter.java:235)

  to org.glassfish.grizzly.filterchain.ExecutorResolver$ 9.execute(ExecutorResolver.java:119)

  at org.glassfish.grizzly.filterchain.DefaultFilterChain.executeFilter(DefaultFilterChain.java:284)

  at org.glassfish.grizzly.filterchain.DefaultFilterChain.executeChainPart(DefaultFilterChain.java:201)

  at org.glassfish.grizzly.filterchain.DefaultFilterChain.execute(DefaultFilterChain.java:133)

  at org.glassfish.grizzly.filterchain.DefaultFilterChain.process(DefaultFilterChain.java:112)

  at org.glassfish.grizzly.ProcessorExecutor.execute(ProcessorExecutor.java:77)

  at org.glassfish.grizzly.nio.transport.TCPNIOTransport.fireIOEvent(TCPNIOTransport.java:561)

  at org.glassfish.grizzly.strategies.AbstractIOStrategy.fireIOEvent(AbstractIOStrategy.java:112)

  at org.glassfish.grizzly.strategies.WorkerThreadIOStrategy.run0(WorkerThreadIOStrategy.java:117)

  in org.glassfish.grizzly.strategies.WorkerThreadIOStrategy.access$ 100 (WorkerThreadIOStrategy.java:56)

  to org.glassfish.grizzly.strategies.WorkerThreadIOStrategy$ WorkerThreadRunnable.run (WorkerThreadIOStrategy.java:137)

  to org.glassfish.grizzly.threadpool.AbstractThreadPool$ Worker.doWork (AbstractThreadPool.java:565)

  to org.glassfish.grizzly.threadpool.AbstractThreadPool$ Worker.run (AbstractThreadPool.java:545)

  at java.lang.Thread.run(Thread.java:745)

  Caused by: com.sun.appserv.connectors.internal.api.ConnectorRuntimeException: Invalid destination jms/NewMessage for MDB: JNDI name not found

  at com.sun.enterprise.connectors.jms.system.ActiveJmsResourceAdapter.getPhysicalDestinationFromConfiguration(ActiveJmsResourceAdapter.java:2263)

  ... more than 71

  ]]

  [2015-06 - 01 T 15: 15:19.286 - 0200] [glassfish 4.1] [INFO] [] [org.glassfish.admingui] [tid: _ThreadID = 130 _ThreadName = admin-listener (6)] [timeMillis: 1433164519286] [levelValue: 800] []

  Redirecting to /common/index.jsf]]

  [2015-06 - 01 T 15: 15:19.301 - 0200] [glassfish 4.1] [INFO] [] [org.glassfish.admingui] [tid: _ThreadID = 132 _ThreadName = admin-listener (8)] [timeMillis: 1433164519301] [levelValue: 800] []

  [[Administration console: initializing attributes Session...]]

  >

  What could be the problem? The app has not changed, it is the environment.

  
  

  After that Googling autour, I found the problem had to do with the syntax.

  
  

  For example, on:

  http://StackOverflow.com/questions/7110563/GlassFish-v3-cant-deploy-MessageDriven-bean-missing-destination-JNDI-name

  
  

  I got the same error. The problem was:

  @ActivationConfigProperty (propertyName = "destination", propertyValue = "jms/SampleTopic")

  This need to be

  @ActivationConfigProperty (propertyName = "destination", propertyValue = "SampleTopic")

  
  

  Can whe´re I set this property?

  Whe´re is the configuration file of Glassfish?

  
  

  Could someone guide me through this?

  
  

  Thanks in advance.

  
  

  Peter,

  I found the domain.xml file. ~/glassfish4/GlassFish/domains/Domain1/config/domain.XML

  In this file, I wasn't able to find anything on the com.sun.appserv. *. packages.

  The software allows to work with this default file (on a Mac).

  With the asadmin terminal I tried to add custom resources.

  And they appear whe. After you restart glassfish no different result.

  The application deployment guide https://glassfish.java.net/docs/4.0/application-deployment-guide.pdf mentionned on glassfish ejb - jar.xml and ejb - jar.xml.

  I couldn't find these files for version 3.1.

  http://docs.Oracle.com/CD/E26576_01/doc.312/e24929/dd-files.htm#GSDPG00080

  But the app was capable on running with the default settings, so without these files.

  What can I check next?

• 12.2.4 deployment application: could not load application

  Hi all

  I was faced with error: "oracle.apps.fnd.framework.OAException: could not load application module" and the solution was to bounce the web server, but the documentation does not have to bounce...

  I followed the following steps to deploy my application:

  1 copy the files in $JAVA_TOP/xxcompany (we use the standard recommendation)

  2 change of privileges: chmod-r $775 JAVA_TOP/xxcompany

  3. run the utility "adcgnjar": adcgnjar

  4 import pages to MDS OFA: applications java oracle.jrad.tools.xml.importer.XMLImporter $JAVA_TOP/xxcompany/oracle/apps/xbol/TimeCard/security/webui/LoginPG.xml - username username-password apps - "$AD_APPS_JDBC_URL" - rootdir $JAVA_TOP dbconnection

  5 edit the file '$APPL_TOP_NE/ad/custom/adop_sync.drv '. Add the following entry in the section marked by the "customization #Begin" and "#End customization" comments

  rsync - zr %s_current_base%/EBSapps/comn/java/classes/xgsg %s_other_base%/EBSapps/comn/java/classes

  At this stage the doc says to work... but no! oracle.apps.fnd.framework.OAException: cannot load application module

  We bounce server web and everything worked!

  We missed something?

  But the question of additional cost is on "adoption" the doc said: a) run '= prepare adoption phase' before step 1 and, b) run "adoption phase = failover ' after step 5.

  My DBA said it is not necessary (and he was right, because the bounce was enough).

  Then... Why the doc says: run adoption?

  Some suggestions? CLO, DilipG, Fernando Barros-Oracle, aJohny

  THX

  Then, after your bouncing experience is sufficient, and steps are correct?

  I would say the rebound is enough for a development environment.

  But I consider the steps adopted for a production environment.

  See you soon,.

  Olivier