Similar Questions

• JAD params of the reading of the JAD file that is changed after the cod file is built?

  Hello

  We have a requirement in which, you must change the jad file, after the cod file is generated.

  But when I try to do is not able to read the newly added params to MIDlet.getAppProperty() . He can read the jad attributes that were there in the jad file before creating the cod file.

  Example:

  existing JAD has "KeyA" whose value is "A." Now package for the project and generate the blah.cod file

  Add a parameter more "KeyNew" with the value "ValueNew.

  Print the source MIDlet.getAppProperty("KeyA") andMIDlet.getAppProperty("KeyNew")

  Step 1. Existing.jad

  KeyA: A.

  Step 2. Build the cod

  Step 3. Add another parameter to Existing.jad

  KeyA: A.

  KeyNew: ValueNew

  Step 4. Existing.jad of charge using javaloader.

  load Javaloader u Existing.jad

  Step 5. Run the application

  Actual output: it prints only a. and not ValueNew

  I read that this is possible in JDE 4.3 + and I'm working on JDE 5.0

  Help, please.

  ~ Joey

  Apparently it only works if we install the Jad with Javaloader file. Having an installation OTA of the Jad file works.

• Need to duplicate the package through the code

  I'm about to upgrade the package body. I don't have a direct access to the database. However, there will be a dba that will run the scripts for us. I can't be sure that the script into Production is the same as the script that I sent you. To the idea of disaster recovery, I would like to replicate the script and rename it "script_name_BAK".
  
  I know I can do this by copying the script and renaming. Because I only have access, can I send on a script that will do I need?
  Also, when I ask the script, it cut so many characters to the right (perhaps 80). I hope that a copy of the script is not the same gap. It will be?
  
  
  Thank you.
  
  
  Daniel

  2yzzy says:
  I'm about to upgrade the package body. I don't have a direct access to the database. However, there will be a dba that will run the scripts for us. I can't be sure that the script into Production is the same as the script that I sent you. To the idea of disaster recovery, I would like to replicate the script and rename it "script_name_BAK".

  I know I can do this by copying the script and renaming. Because I only have access, can I send on a script that will do I need?
  Also, when I ask the script, it cut so many characters to the right (perhaps 80). I hope that a copy of the script is not the same gap. It will be?

  Thank you.

  Daniel

  Why not inform the ADMINISTRATOR who must be part of this process and ensure that it has a valid "backup" this package until he applies the change that you send. Sounds like something I don't want to be aware of if I was in his place.

  In general resembles your store needs serious work on it's versions of the code and procedures management strategies.

• I am updating of content in an old site and uses an old extension to close a page of the child.  It worked fine until I started using CS6.  The code for this is in a model that I use and the code has not changed.

  So the site is www.fulcrumcwi.com and the URL of the page is: FulcrumCWI Rebecca Morgan operations strategy Consulting newsletters.

  If you choose the first HTML link for the news bulletin when you try to use the close buttons, none of them work.  Yet if you go down in the January issue and switch to the HTML version, it works very well.  This is the code that the extension highlights:

  < form >

  < input name = "Close" onclick = "self.close (); return false"type ="button"value ="Close"/ >

  < / make >

  I have not changed somehow.  The only change is I use Dreamweaver CS6 to make these changes.  Does anyone have a solution for me?

  As always, thanks in advance.  (and Yes, I know that this site needs a major update)

  GraphicEdge

  Looks like you're missing target = "_blank" in the link "HTML" to open in a new window that works properly...

• When you try to add a new device, on access to tools, Options, Sync tab, no manage an account or add a device link button. I can get codes displayed to appear on another device but cannot access a screen that I can enter the codes.

  When you go to the tab sync, I see nothing like the picture in the help pages that show a button manage an account and Add link device. I think I need to access the device link add to reach a screen that I can enter codes to set up the easy way sync. I have already overcome the problem of connection and enter my key synchronization but it's more effort and it seems to me that adding new devices does not work as described. I'm on a Win7 PC and a laptop Windows XP using Firefox 5 and using Firefox Home on an iPod Touch. I have not found a way to get into the 3 codes of four characters shown on my Win7PC on one of the other devices.

  Hello!

  If you have an account, but it seems that you are not logged in. Please, follow these steps:

  -Go to your tab sync in the Options window.
  -Press «Set up Firefox Sync»
  -Press half 'connect' down.
  -Select "I don't have the camera with me.
  -Now enter your contact information, including your sync key. And you're ready to go.
  -If you have lost your sync key, select the option below "I have lost my other device" and follow the instructions.

  I hope that this information resolves your issue.

• Why the Media Center crash whenever I try to add an Xbox 360 console as an Extender to it just after that I have enter the code?

  Media Center
  Xbox 360
  Windows 7
  New installation
  Previous update Vista to 7 no problems get Extenders to work.

  Hello

  There may be some third party programs that might be in conflict with the Extender.
  You can perform the clean boot to determine the guilty program

  http://support.Microsoft.com/default.aspx/KB/929135

  I hope that helps!

• Whatever that means? (Just the Code line) JavaFX has book

  Hi guys!
  IM I learn a lot with this book and the forum. But even once, I need your help
  What this line below means?
  

  *Modality m = modality ? Modality.APPLICATION_MODAL : Modality.NONE;*

  Also, I want to know, please, what this also means:
  

  initOwner(owner);

  Thanks for your help!
  
  Learned to love the oracle and this forum and ppl in this forum

  Terms as a step specifies what steps will receive events. APPLICATION_MODAL would mean that no other stadiums receive events except the one you are creating now. NONE would mean that everyone can still receive events. This is used when you want to block the other entrance and ask the user something they must answer before proceeding.

  initOwner (owner) defines the 'parent' of a new stage. This means that the new stage belongs to another step and should not be a top-level window (you will not get another task bar button). It is also important for modality type WINDOW_MODAL which causes the entry to be blocked to the owner (and its owner in turn if necessary), but not in the other stages of higher level, you might have opened.

• Coloration of the code for the PHP files using CSS

  Coloration of the code for the PHP files using CSS
  

  The Situation:

  It is possible to mix PHP and CSS so that you create a PHP file and it is served to the user in a CSS file. It works just like writing a normal PHP file which is then processed and used in HTML. To do this, you create a PHP file and at the top of the file, you add the following line of code:

  <?php header("Content-type: text/css"); ?>

  This line tells the browser that the file is CSS instead of HTML. Fantastic.

  Here is a link to a more detailed article on the subject: http://www.barelyfitz.com/projects/csscolor/

  The problem:

  The problem is that when I create a PHP file in Dreamweaver code colors in the document like PHP for PHP and HTML to CSS code code because it still thinks the document is supposed to be a HTML document. Is there a way to change the style of this situation? I find that code coloring to normal CSS files is really useful and would like to be there instead of just black text.

  Other information:
  

  I already have this submitted a feature request to Adobe, but I never heard back. Does anyone know how to do this now?

  I would really like to see the code coloring to adapt to the content type of the file, when the file is PHP. So if no content type is specified, values by default in html format, but when it's CSS, code coloring so a coloration of the different code is used. It could also adapt to files JS, XML files, the works. But really, I just want to add the PHP/CSS code coloring.

  I'm certainly not an expert, and this is my first time looking at the file,

  but it looks like the section.

  "ID ="CSS"doctypes ="CSS"priority '50' = > ' see the style css and

  the and refer to where the design must

  be applied. If that is correct then the code you provided should style

  It all starts after the

  and ending with another php code? It should be then that a

  tag additional php to be present in the document of 'close' the

  blowdry.

  And the continuation of this line of thinking, I have just that in the (php-> css)

  file. I placed my code. Then

  After the CSS, I placed another block of php: and it works!

  The CSS is styling just like should the CSS.

  Logically, you need that, and it seems to work ok for me without it. If Yes, you can change "" to be more explicit and less impact for PHP parsing, such as ' /DW/ '.

  Haha, Unfortunantely, PHP is more the same color scheme. He

  went from normal red blends what the html code looks like

  scheme (blue with quotations from green text). Fortunantely this configuration is far

  more convenient than the previous color coding!

  All subsequent PHP Directives are coloring properly for me - it's just the first one that triggers the coloration (e.g. ) is not. What do you see?

  If, therefore, in the XML file you added in CodeColoring.xml, you can change:

  scheme = "outerTag.

  is similar to the colouring of the PHP Directive:

  scheme = "customText" id = "CodeColor_PHPScriptBlock".

  This causes the entire PHP directive is red color - not optimal, but a little better.

  HTH,

  Randy

• How can I check if a field is empty? The code that I think that a '0' is empty, what is wrong.

  The code I used is copied from this thread: https://forums.adobe.com/thread/1223607

  I created a button that lists each field if it's empty. However, a field will always pop up even if there is a character in it, i.e. '0 '.

  Help, please.

  I expected that you would change the code based on what I've shown. Then change a line to:

  If ((f.type == "text" && f.valueAsString === "") |) (f.type == "checkbox" && f.value === "Off")) emptyFields.push (f.name);

• Receive the error message "DISC ERROR C:\PROGRAM FILES\MICROSOFT GAMES\RISE OF NATIONS\ART\OPENING WRITING. MAKE sure THAT YOUR DRIVE HARD IS NOT FULL AND THAT THE FILE IS NOT in USE"in rise of nations?

  Original title: rise of nations

  on the rise of nations, I get this error code. How to fix it. DISK ERROR WRITING C:\PROGRAM FILES\MICROSOFT GAMES\RISE OF NATIONS\ART\OPENING. WMV. MAKE SURE THAT YOUR DISK IS NOT FULL AND THAT THE FILE IS NOT IN USE.

  Hello

  
  1. do you get this error during installation, downloading or playing the game?
  2. What is the amount of free space on the hard drive?
  
  Method 1: clean boot the computer and check if the problem occurs.
  
  To help resolve the error and other messages, you can start Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
  
  Note: Follow step 7 to reset the computer to start as usual after the boot process.
  
  http://support.Microsoft.com/kb/929135
   
  Method 2: uninstall and then reinstall the game and see if the problem still occurs.
  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program
   
  http://www.Microsoft.com/games/thronesandpatriots/default.aspx
  http://www.Microsoft.com/games/riseofnations/downloads.aspx
  
  Hope this information helps

• Set the format digital u32 when writing of TDMS files

  We use two meters of a PCI-6251, with two counters in the mode of angular position, to measure the angular positions of the two optical encoders 1000 per second for intervals of 10 to 20 hours.  We are writing to write files using PDM.  The files are very large, about 800 MB, but it is acceptable.  Convert us the TDMS files in .txt files, and then the data from .txt files are analyzed in Mathematica.

  My question is: How does one control the digital format of the data that is written in TDMS write?  At this moment we have two counters of the value of the product N = 10000 numbers U32 samples are then transmitted continuously to a TDMS file every 10 seconds.  The counters are using units of ticks (integers) and we would like to see whole in our data files.  We are convinced that the counters are producing U32 to the format number, since we see the correct U32 integers in the indicators on the front panel and we see labels on the value axis on our waveform graphs are integers, not real numbers.

  But it is also clear that Scripture TDMS puts double-precision (64-bit) numbers floating point in the PDM file, not numbers of U32.  The double-precision floating-point numbers cause our .txt files to be twice as big as they should be - these .txt files are half full with useless zeros and decimal points.  In addition, when you convert the U32 to double-precision real numbers, it seems to be a loss of precision as a result of writing of PDM, which is not acceptable.

  Our experience produces pairs of integers: U32 (or I32) format.  We could even get away with numbers I16.  Is it possible to get our data to stay in U32 (or same I16) format when they are written to the TDMS file?  What controls the digital numbers written to tdms?  Do all the numbers written in a PDM file end up being written as floating-point numbers double-precision?

  We use LabVIEW 8.2 on a PC running windows XP.

  If associate you TDMS write U32 data, data in the file will be U32. Floating-point conversion probably occurs when you read data from the file back. You can change this by plugging in a U32 empty table at the entrance of 'data type' reading PDM.

  You can check the data type in the file by examining the channel properties in the viewer of TDMS files. If NI_DataType is 7, given in the file are U32. If it is 10, data are floating point.

  Hope that helps,

  Herbert

• Writing a batch file which will remove some files?

  I'm writing a batch file which will remove some files based on a list in a text file. Each line lists a different file and a single line of the content of the files, as below:

  m:\trumpf3\ncdone\rueck090.txt:da,'1599','159934','159903400',1,1,1934
  m:\trumpf3\ncdone\rueck091.txt:da,'1599','159935','159903500',1,1,3518
  m:\trumpf3\ncdone\rueck092.txt:da,'CP_TAPESHOT',1
  m:\trumpf3\ncdone\rueck093.txt:da,'CP_TAPESHOT',1

  m:\trumpf4\ncdone\rueck440.txt:da,'*','480','0017341',1,1,2288, "
  m:\trumpf4\ncdone\rueck441.txt:da,'*','500','0017343',1,1,3705, "
  m:\trumpf4\ncdone\rueck442.txt:da,'*','510','0017344',1,1,3628, "
  m:\trumpf5\ncdone\rueck494.txt:da,'2179','217901','217900100',1,1,1500, "
  m:\trumpf5\ncdone\rueck495.txt:da,'2179','217902','217900200',1,1,707, "
  m:\trumpf5\ncdone\rueck496.txt:da,'2178','217801','217800100',1,1,1042, "
  m:\trumpf5\ncdone\rueck497.txt:da,'2178','217802','217800200',1,1,1383, "

  The first and the second file are two good files, however the third and fourth, I didn't need. At this point, I'll have to go through the list of files and manually delete each one that does not match the format of 1 & 2. They are in different folders, but I think that the path at the beginning should be able to make the batch to delete this file. I can just find a way so that it can go through the list in the text file. Any help would be greatly appreciated because that would be a huge timesaver.

  Well, I think even more easy.  Paste the whole lot into Excel to make it easier to handle. You can filter the lines manually, or write a formula next to him who decides whether the line should be understood, something like this:

  

  I don't know what criteria would you use, so I used 'if the number after that the parenthesis after the first comma is a number, keep the line."  The text surrounded by a circle is the text that I check to see if it is a number:

  

• File bundle (MaintenanceMinder.bar) was rejected. Package ID is required for all .bar file. If this is an upgrade, ID of Package must match ID of Package in the bundle of original file.

  Hello

  I released maintenance Minder application in portal provider for smartphones (BBOS) and QNX.

  For mobile app OS QNX it is inconsistent in the name of the Organization, so I created new signing key, but I'm not download the latest version.

  error:

  File bundle (MaintenanceMinder.bar) was rejected. Package ID is required for all .bar file. If this is an upgrade, ID of Package must match ID of Package in the bundle of original file.

  Please remove this package so that I can give the latest version. If you need assistance please complete

  Hello perumala,.

  Please be more patient.  As per the response automatic you received when you are connected to a case of pension, the team will answer you within 24 to 48 hours.

• My students use the filling and the signature on a package of .pdf tool I'm going to fill them, but when they record and open the next day their text boxes, that they created with the bucket fill tool and sign all went and many are overlapping.

  My students use the filling and the signature on a package of .pdf tool I'm going to fill them, but when they record and open the next day their text boxes, that they created with the bucket fill tool and sign all went and many are overlapping.

  Hi chbradshaw,

  Instead of filling & signature, tool, use the text comment comment tool, KB doc option. using comments in the PDF, Adobe Acrobat DC files (keyword: Add a text comment).

  Kind regards

  Nicos

• When I edit a photo in "develop" and then click back to the library to export the only changes to the photo that carry over is the cropping. I can't export my edited photo. Anyone have this problem? I have the creative cloud package

  When I edit a photo in "develop" and then click back to the library to export the only changes to the photo that carry over is the cropping. I can't export my edited photo. Anyone have this problem? I have the creative cloud package

  Hi stever25146025,

  According to the request, I understand that when you export images from Lightroom it shows only the crops, is not editing.

  It is specific to a single image or all images in the catalog?

  Could you please let me know what file format you choose to export the images and also what version of Lightroom are you using?

  Kind regards

  Tanuj