deploy the VM of missing model desktop files

Similar Questions

• Deploy the VM from a model using personalization and passage of IP information

  Ok

  It is not as it should be so difficult, but I can't make it work.

  Here's the deal, I have several different models that we deploy since.  I also have a different customization for each of these models.

  In the customization, the only information that must be provided at deployment time is intellectual property information.

  For example, if I want to deploy a VM of Windows 2003, I would use my 2003 Windows and customization model.  In this file, all information Windows are specified and the only items that I need to specify is what will be IP from Nic 1 and what will be the nic 2 IP.  Does anyone know how to pass these variables in order to deploy the machine?

  This command also works a long time that I do not specify the intellectual property information.

  New-VM - VMhost ESX1 - VM1 - Windows_2003_Template model name - data store Datastore01 - OSCustomizationSpec

  I have 2 cards I need to configure under construction.  In the customization file, I said to prompt the user for the IP address, but the gateways, dns servers, wins servers, are already configured.  The only variable, what will be the real IP.  How to get those 2 IP addresses in the customization of the OS cmd.

  New-VM - VMhost ESX1 - VM1 name - model Windows_2003_Template - data store Datastore01 - OSCustomizationSpec-ipaddressnic1 10.10.10.15?

  New-VM - VMhost ESX1 - VM1 name - model Windows_2003_Template - data store Datastore01 - OSCustomizationSpec (what happens here)

  I saw several post, but have been unable to get a response.  I use the latest version of powershell. (4.1)

  LucD,

  Thank you! that little powercli was almost exactly what I was looking for.

  Greg.

• RE: Relocation of the office to correct folder desktop file

  Recently, I had to have my computer restored and the young man who worked on it, that it contains a folder with my favorites.  He placed it on the desk. After leaving the store which is a two hour drive for me, gave me vague instructions on how to move to the correct file.  I need to know how to take the information in the Outlook folder on my Destop which is favorite, to the right folder of favorites in my Windows 8.  You can helpme.

  Start > top right column (name of your computer) > choose a folder called 'Favorites', leave it open.

  Then open Favorites folder on the desktop.  CTRL + A (select all), command-C (copy), and then go to empty the 'Favorites' folder that you opened first, Ctrl + V to paste.

  Simple as that.

  Have a nice day :)

• Server R2 2012 crashing when you deploy the stand-alone host model.

  I encountered a problem with my server 2012 model deployment to a new independent host that I built in my virtual data center.

  Specification of the server:

  HP DL380 g8 linking the latest PSP firmware updates

  Local storage

  ESXi 5.5 U2 may 2015 HP build

  Card 8 GB SD for esxi 1.9 local TB SAS storage

  HP P420i

  Whenever I have move R2 server in 2012 to that Server Manager host down and other questions are noticed.

  Another noticed is characters and text on the virtual machine begins to blurr from the console.

  If I power off the virtual computer and move it to a server in my group I have no problem. Both servers are running the same version of 5.5U2

  Has anyone seen this problem before or suggestions?

  The result of more tweaks and troubleshooting exposed a faulty processor.

  This isn't linked VM.

  Thanks for the reply.

• After CC 2.3.0.151 update, the synchronization process missing (no synchronization file, no Typekit) basic

  I'm a moderator since long time member and ACP forum on several forums. I have two Macs running Mac OS X 10.10.5. Two of them have been updated tonight to the latest version of cloud creative app, 2.3.0.151.

  On my MacBook Pro, the CC app works well. But on the iMac, there is no access to synchronization of file or Typekit. All I see is under fonts or files is the rotating blue icon.

  When I studied the CC app from this computer, I found the following:

  * In preferences, File Sync is clicked on, but the location of the folder is empty and gray out.

  * In preferences, Typekit is clicked, but grayed out and unselectable

  * When I use the activity monitor, I see that the process of "CoreSync" does not work (as it is on the other Mac, and when I saw before)

  When I came across this forum, I've seen opinions on the problems of CoreSync. I followed the instructions in this help file:

  Using creative cloud | Uninstall the creative cloud desktop application

  I uninstalled CC app and used the link to reinstall the version 2.3.0.151.

  But nothing has changed.

  What should I do next?

  Thank you, Ben. I have creative cloud support online help. It was a permissions problem with the process CoreSync (affecting File Sync and Typekit). Now fixed!

• Creating a copy of the base data missing data UNDO files

  I need to create a copy of a database 11G on a windows server (using a script to create controlfile with database set = "database_name") from a cold backup that was taken at the time, but the backup lacks 2 3 of the UNDO tablespace data files.
  
  There is a lot of advice to suggest that setting undo_management = 'MANUAL' a database can be restarted and the missing data files dropped (and recreated)... However, I don't know if it is a solution that works in the context of rename the database by using create controlfile method
  
  does anyone know if the parameter undo_management = 'MANUAL' is all I have to do? or is it more...
  
  any suggestion would be received with gratitude...

  Dear patrichards,

  Your quite welcome. I am pleased that you have solved your problem.

  Kind regards.

  Ogan

• How to deploy the application by using a file single .cod.

  Hello

  In my application, I'm Ksoap library. So I created a library for Ksoap project. and my application depends on this library project.

  Now, when I deploy the application, I need to install 2 .cod files

  1 - Ksoap

  2. my application.

  Is it possible, so that I can deploy the application with 1 single .cod file.

  The user must not install 2 .cod files. One .cod file should be enough so that he can run the application.

  Yes. In an alx file, you can simply add Ksoap_Library.cod in the tag.

• Deploy the RT too Long of generic IO file path

  So I've been fighting with this configuration and mistakes on deploying code to an embedded target RT.  I have a RT Linux cDAQ-9132 and I found that if my path is too long, it will give strange errors.  Sometimes the error will be on the opening, the project gives 'Generic IO to file' but is the VI opens without error.  And sometimes I see "loaded with errors on the target and was closed" on the deployment.

  The path to the code reuse in the user.lib is similar to the following:

  C:\Program Files (x 86) \National Instruments\LabVIEW 2015\user.lib\_xxxxxxx\Automotive Communication\CAN Drivers\Generic PEUT Drivers\CAN Class\Public\Signal Conversion\Read signals Polymorphics\Read - Single Sample_xxxxxxx.vi

  Who are 233 characters including slashes and semicolons that falls within the limitation of 260 Windows (or 255).

  An example of this is attached.  Unzip the user.lib zip in the user.lib and open the Test of RT project.  It's a RT. target but open just the RT Test VI.vi should show the generic IO file error and the VI appears missing on BD.  If you then open the signals of read - only Sample_xxxxxxx.vi the VI loads without error and high level VI can be executed without error now.

  I've not seen it documented anywhere, but is there a limit to the length of file that causes this problem?  Is there a document indicating how deeply in the re-use of user.lib can be?  I know that my ways were becoming a bit long but also noticed Windows length had not been exceeded again.  And is it possible that if this limtiation exists, that we will have a little more useful error?  Thank you.

  Windows 7 x 64, 32-bit LabVIEW 2015.

  
  

• All my desktop files and library are missing in Windows 7

  Need help, I have a windows 7 Ultimate OS on an old Dell XPS of 3 years. Operating system implemented at level of Windows Vista home for more than a year. Last week, when I connected, I noticed that all my desktop files were missing. Library of the missing files (including photos, videos, music & docs). Whats funny is that none of the files are missing. However, all possible files in each folder are missing. There is no way that I could have them was deleted by mistake, can not think of a keyboard shortcut to clear all the files, but leave the files. I run avast antivirus, set to day & works perfectly well. No application installs & the only windows update I see around this event was for MS silverlight.

  I backed up all possible files using a recovery agent & the thought of doing a clean reinstall of the operating system. PS - My research on the net has returned no results for this problem. Looking for all entries before going to come & clean clean my system. THX in advance
   
  * original title - need help with Windows 7, all the missing files *.

  Here are the steps I recommend:

  1. Open the computer and open your folder C:\Users.
  2. Right-click on the folder of your user name and select Properties.  Unset as hidden, and then click OK.

     You will be asked what you want to apply the changes.  Choose JUST THE FOLDER.  Although it seems appropriate, are not select subfolders, because some things down there, including the appdata folders and as such, must be hidden.

  3. Then go inside your userfolder and select all your folders accessible by the typical user (downloads, Documents, photos, video, etc.) and disabled the option down on those.  This time, pouvez you use the option 'apply to all subfolders and files '.
  That will get you squared away back.

• Real desktop file went in the systemprofile folder. How can I get this back: C:Windows\system32\Config\systemprofile\Desktop

  The 'desktop' file is missing/aisle of the C:Windows\system32\Config\systemprofile\Desktop

  Hello

  Thank you for writing to Microsoft Communities.

  Until we start troubleshooting on this issue please provides us with additional information by answering a few questions below, this will help us better solutions to the problems.

  1. have there been recent changes to the computer before the show?

  2 are you face any weird problem on the computer?

  Please go ahead and follow the steps mentioned and later a update on the State of the question.

  Method 1: Rof the United Nations [System File Checker] SFC scan on the computer that would be a search for system files corrupted on the computer and replace them.

  http://support.Microsoft.com/kb/929833

  Method 2: If the problem persists then try to perform a restore of the system:

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  To run the system restore, you can see the following link.

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows 7:

  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

  Please follow these recommended steps and post if you still experience the problem.

• Deploy the model w/o vCenter...

  Greetings...  I have a Windows Server 2008 virtual machine that has been cloned in a model via a feature in vCenter.   I need to deploy this model in our development environment consisting of a host 5.1 ESXi and vSphere client running against her.  We have not vCenter running in our dev environment...   Question: How can I deploy this model w/o vCenter being present?   Is it as simple as a converter any running on the VMDK file, then create a new virtual machine from scratch & pointing to the "existing virtual disk"?   The only thing here, is that in the data store, I have two files VMDK: filename.vmdk and filename_1.vmdk thanks!

  Yes, that sounds good.

  This othe rfilename_1.vmdk should be a second disk on this virtual machine.  So when this template has been created, it looks like someone added a second drive to the virtual computer.  so a C:\drive which would be the filename.vmdk and player E:\Data or something that would be the filename_1.vmdk

  Also because you can not run the configuration wizard that is part of a deployment of the model you will be have sys prep the Windows VM after that it starts to get a convincing identity, otherwise, you will encounter duplicate Active Directory SIDS

  Hope this has helped.

• Issue of the Adobe Creative Cloud missing or damaged files

  I tried to open Adobe Creative cloud so I could download Illustrator, and when I tried to open it, it says there were missing or damaged files and download again. But before Adobe Creative Cloud even has finished installing, the same box popped up and asked me to do the same thing again. I had tried the same thing 3 or 4 times over, and it has not worked once. I am a PC user, and I would really appreciate if someone can help solve the problem. Thank you.

  Please follow the steps below: -.

  1 - uninstall the Adobe Creative cloud Control Panel application. (https://helpx.adobe.com/creative-cloud/help/uninstall-creative-cloud-desktop-app.html)

  2 remove Adobe Application Manager and OOBE folder of

  C: drive and navigate to C:\Program Files (x 86)------\Adobe "Common Files".

  3 - remove the folder Adobe Creative cloud of C:\Program Files (x 86) \Adobe.

  4. Remove AAMUpdater and OOBE [system drive]: \Users\ [user name] \AppData\Local\Adobe

  5 reinstall the creative application of cloud at the bottom of the link

  https://creative.Adobe.com/products/creative-cloud

  I hope this helps.

  Kind regards

  Vivet

• Spread the word about Eappcfg.dll DLL file missing

  every two months I get the message that I'm missing a DLL file named Eappcfg.dll and am in awe to this fact.  I don't know why I get this message.

  Hello

  When exactly do you get the error message? During execution of any task or when the computer boots/startup?

  Note:

  Eappcfg.dll comes from the software you have installed on your system. As most applications store data in your system registry, it is likely that your registry database suffered from fragmentation and accumulated invalid entries that may affect your computer's performance.

  I suggest that you can exercise SFC scan and check if TI the problem persists. To do this, please see the following article.

  The SFC/SCANNOW command. analysis of all protected system files and replaces incorrect versions with appropriate Microsoft versions

  File system (CFS) Checker
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/system_file_checker.mspx?mfr=true

  Provide us with more information about the issue so that we can better help you.

  Let us know if it helps!

• I can't access my windows management instrumentation software in order to use the restore of the system because some of my files of windows management has been moved or is missing. where can I find them

  I can't access my windows management instrumentation software in order to use the restore of the system because some of my files of windows management has been moved or is missing. where can I find them that I just want to be able to use the system restore and information system.  Thank you

  Hello

  What is the full and exact error message?

  Check if the article below or the thread will help.

  How to use restore system with Windows Management Instrumentation in Windows XP
  http://support.Microsoft.com/kb/295299
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-system/my-WMI-file-is-missing-i-am-running-Windows-XP/86242cad-ee5a-E011-8dfc-68b599b31bf5

• I am trying to burn a dvd on windows media player movie, but all I get is a desktop file burned on the dvd

  I am trying to burn a dvd on windows media player movie, but all I get is a desktop file burned on the dvd and that's all what he'll do it just ejects and the session is over

  Hi Barbara,

  You can use the player to burn a mixture of songs from the library of the drive or your computer to an audio CD, after which you can play the CD in any standard CD player. Alternatively, you can burn files on CD and DVD data. It is not possible to burn the live streams, such as radio stations, on a CD or a DVD.

  Follow the steps in the link below.

  Burn a CD or DVD in Windows Media Player: frequently asked questions:

  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Media-Player-frequently-asked-questions

  If you need further assistance on this topic, let know us and we will be happy to help you.