Deploying Applications multilingual in run Mode

Similar Questions

• Initially, opening an application stand alone not in run mode.

  When you open an application stand alone for the first time, how can I automatically start in run mode?  I want the user to click on the white arrow to start the program.  Are there ways to get around this?  Thank you!!

  Yes.  Here's how:

  When you build your executable file, there are several screens in which you set parameters.

  Under "The Source file settings", check "VI Set of properties for all contained items.

  Click on the button "customize the properties of VI.  Another dialog box appears that lists the properties of the VI.

  Under 'Performance', uncheck the box "use the VI property.

  Make sure that ' Run when opened ' is not checked.

  Now, when you build your executable file, your user will have to press the white arrow to start the VI.

  Hope this helps,

  d

• Csrss.exe application cannot be run in win32 mode

  Hi support them.

  I'm having a problem with the CRSS.exe file, when I connect to windows I get a popup window that flashes green and checks that seems to be the CSRSS.exe file.

  When tried to open the file the C:\Windows\System32\csrss.exe path, what follows is the msg 'C:\Windows\System32\csrss.exe application cannot be run on win dows 32 mode.

  Please try to remove the unwanted popup when I logon system.
  Your help is very appreciated.

  Concerning
  Arvind

  Hello

  1. don't you make changes to the computer before that happened?

  Csrss.exe is an essential component of the Microsoft windows operating system. It stands for Microsoft Client/Server Runtime Server Subsystem. This process is responsible for dealing with the majority of the windows interface.

  I suggest you to try the steps below and check if it helps.

  Method 1:

   Try to put your computer in a clean boot state, and check to see if the same problem happens.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Method 2:
  The problem can also be caused by your security such as anti-virus program or a firewall of Windows /Defender that can have conflicting parameters as to not not to perform certain tasks. I suggest you temporary disable antivirus and firewall and check the result again.

  Disable the antivirus software:
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Important note: Be sure to enable the security software and firewall on the computer after checking.

  Hope this information is useful.

• A fxml application can be run as an unsigned applet or webstart program?

  I came across this bug in NetBeans:
  http://NetBeans.org/bugzilla/show_bug.cgi?id=202615 "files, Html and jnlp arising from the FX project with fxml files fails to run.
  
  It's the kind of old, but he says:
  

  Applications created as new FXML demand using new project wizard
  run correctly in all three deployment modes (standalone, webstart, integrated in)
  (HTML) if the signature is on. If the signature is disabled, then the application runs correctly
  autonomous, but an attempt to run as a WebStart does nothing and run in
  Browser reports an error in the area of the application in the html code.

  And when I run a test run a fxml program application in a browser today I get the same thing.
  As the description says, I can work around it by signing an app, but I still prefer not sign if possible.
  
  What causes the error below?
  Is it has unwanted NetBeans or is this a general problem with the help of fxml in an applet?
  Or maybe it's something in my code (that I can publish if necessary)?
  
  Environment:
  7.2 NetBeans
  JDK1.7u6
  Win7
  
  Procedure of development:
  Write fxml in SceneBuilder 1.0
  Write code in NetBeans 7.2
  Choose run in the browser on the menu run NetBeans.
  Run the program and the browser will display "runtime error. Click for more details".
  Click on for more details the following stack trace appears in the java console.
  

  access denied ("java.lang.RuntimePermission" "accessDeclaredMembers")
  file:/C:/Users/John/Documents/NetBeansProjects/ConfirmationDialog/dist/ConfirmationDialog.jar!/org/jewelsea/dialog/demo/ColossalCave.fxml:13
    at java.security.AccessControlContext.checkPermission(Unknown Source)
    at java.security.AccessController.checkPermission(Unknown Source)
    at java.lang.SecurityManager.checkPermission(Unknown Source)
    at java.lang.SecurityManager.checkMemberAccess(Unknown Source)
    at java.lang.Class.checkMemberAccess(Unknown Source)
    at java.lang.Class.getDeclaredFields(Unknown Source)
    at javafx.fxml.FXMLLoader.getControllerFields(FXMLLoader.java:2543)
    at javafx.fxml.FXMLLoader.access$1400(FXMLLoader.java:68)
    at javafx.fxml.FXMLLoader$ValueElement.processValue(FXMLLoader.java:655)
    at javafx.fxml.FXMLLoader$ValueElement.processStartElement(FXMLLoader.java:572)
    at javafx.fxml.FXMLLoader.processStartElement(FXMLLoader.java:2314)
    at javafx.fxml.FXMLLoader.load(FXMLLoader.java:2131)
    at javafx.fxml.FXMLLoader.load(FXMLLoader.java:2028)
    at org.jewelsea.dialog.demo.ColossalCave.start(ColossalCave.java:19)
    at com.sun.javafx.applet.FXApplet2$1.run(FXApplet2.java:131)
    at com.sun.javafx.application.PlatformImpl$4.run(PlatformImpl.java:173)
    at com.sun.glass.ui.win.WinApplication._runLoop(Native Method)
    at com.sun.glass.ui.win.WinApplication.access$100(WinApplication.java:29)
    at com.sun.glass.ui.win.WinApplication$2$1.run(WinApplication.java:67)
    at java.lang.Thread.run(Unknown Source)

  This isn't a question of the NetBeans - FXML applications should be approved to enable the domain controller injection and method Access Manager. The question is made here:

  http://JavaFX-JIRA.Kenai.com/browse/RT-14883

  Greg

• VI in run mode

  I don't know why vi enter run mode automatically! I don't know that it is with some option that I checked unknownly or bad link! Y at - it a BT option when done vi execution when it is opened even if this isn't an application?

  There is an option in the dialog box properties (enforcement section) which is called "opening run", if this option is checked. Well, he does what he says.

  Then open the VI, the stop, press "ctrl + i" to open the properties of VI, chose "Performance" in the menu drop down and see if this option is enabled, if so, uncheck the box.

  Hope this helps

• Launch the KVM console: could not validate the certificate. The application will not run

  I use MAC OS and see another error message "certificate validation failure. The application will not run. This error message is seen in release of Java 7 u21 and later also.

  Exception in detail shows:

  java.lang.RuntimeException: no Java triggered, not managed exception! (Original problem: try to insert a list not property object {})
  "https://172.27.136.185"= {} ".

  key AllowNoPromptSites)
  at com.sun.deploy.security.MacOSXUserTrustRecordList.nativeAddTrustRecord (Native Method)
  at com.sun.deploy.security.MacOSXUserTrustRecordList.addTrustRecord(MacOSXUserTrustRecordList.java:92)
  at com.sun.deploy.security.MacOSXTrustUI.evaluateTrustAfterShow(MacOSXTrustUI.java:230)
  at com.sun.deploy.security.MacOSXTrustUI.evaluateAsTrustedSite(MacOSXTrustUI.java:186)
  at com.sun.deploy.security.MacOSXTrustUI.evaluateTrustAndShow(MacOSXTrustUI.java:156)
  at com.sun.deploy.security.MacOSXTrustUI.showDialog(MacOSXTrustUI.java:79)
  at com.sun.deploy.security.X509Util.showSecurityDialog(X509Util.java:152)
  at com.sun.deploy.security.TrustDecider.isAllPermissionGranted(TrustDecider.java:805)
  at com.sun.javaws.security.AppPolicy.grantUnrestrictedAccess(AppPolicy.java:295)
  at com.sun.javaws.LaunchDownload.checkSignedResourcesHelper(LaunchDownload.java:1851)
  at com.sun.javaws.LaunchDownload.checkSignedResources(LaunchDownload.java:1527)
  at com.sun.javaws.Launcher.prepareResources(Launcher.java:1283)
  at com.sun.javaws.Launcher.prepareAllResources(Launcher.java:636)
  at com.sun.javaws.Launcher.prepareToLaunch(Launcher.java:338)
  at com.sun.javaws.Launcher.prepareToLaunch(Launcher.java:238)
  at com.sun.javaws.Launcher.launch(Launcher.java:127)
  at com.sun.javaws.Main.launchApp(Main.java:460)
  at com.sun.javaws.Main.continueInSecureThread(Main.java:292)
  to com.sun.javaws.Main$ 1.run(Main.java:125)
  at java.lang.Thread.run(Thread.java:695)

  Pointers to launch KVM in my system, would be really useful. I'm stuck for over 2 weeks now :-)

  Thanks in advance,

  Suresh.

  Suresh,

  can you provide more details.

  Server model?

  version of the firmware?

  Please read the article if this can help:

  http://www.Cisco.com/c/en/us/support/docs/servers-unified-computing/UCS-...

  -SK

• JavaError: "failed validation certificate. The application will not run.

  HI, OTN,.

  1. I uninstalled the EPM

  2. install 11.2.3.500

  3 configuration is complete.

  4. download and install JDK 1.6_45

  5. while I run the Regional service console I get the error message

  JavaError: "failed validation certificate. The application will not run.

  java.security.cert.CertificateException: your security configuration will not allow the authorization of new certificates

  at com.sun.deploy.security.TrustDecider.isAllPermissionGranted (unknown Source)

  at com.sun.javaws.security.AppPolicy.grantUnrestrictedAccess (unknown Source)

  at com.sun.javaws.LaunchDownload.checkSignedResourcesHelper (unknown Source)

  at com.sun.javaws.LaunchDownload.checkSignedResources (unknown Source)

  at com.sun.javaws.Launcher.prepareResources (unknown Source)

  at com.sun.javaws.Launcher.prepareAllResources (unknown Source)

  at com.sun.javaws.Launcher.prepareToLaunch (unknown Source)

  at com.sun.javaws.Launcher.prepareToLaunch (unknown Source)

  at com.sun.javaws.Launcher.launch (unknown Source)

  at com.sun.javaws.Main.launchApp (unknown Source)

  at com.sun.javaws.Main.continueInSecureThread (unknown Source)

  to com.sun.javaws.Main$ 1.run (unknown Source)

  at java.lang.Thread.run (unknown Source)

  6 console file is not available "Oracle\Middleware\EPMSystem11R1\products\Essbase\eas\". I missed a step in the installation and the configuration?

  Need help, the team

  Concerning

  Brouwer

  Have you tried to lower the security?

  Check the support matrix - http://www.oracle.com/technetwork/middleware/bi-foundation/hyperion-supported-platforms-085957.html

  

  You can also install the Regional service console

• Deploying applications in vCAC

  To deploy applications in the templates, you can use Application Director. What are the tools outside enforcement Director do or can be used to deploy and configure applications such as SQL and Sharepoint automatically?

  What are the advantages and disadvantages of the tools?

  Looking forward to hear from you.

  Hello

  You have two options for what you describe, if you talk to a single instance without dependencies, then Application Director is a bit exaggerated.

  1 - use the comments vCAC agent to install the software.  This has the advantage of easily integrate with your deployments and works out of the box.  The requirement is that you have scripts ready to manage a facility without application support.  However, for the two apps you mention, these can easily be found on the Internet.

  2. use vCO workflows.  It really is my favorite because it does not keep the guest agent installed on a base image, it's a little more extensible than the agent of comments.  You'll also need scripts Unattend for this method, and this method works better with virtual machines VMware running VMtools (so that the vCO can launch scripts on the guest).

  3 puppet/head/salt.  These have the advantage of having very large repositories of content to deploy applications.  You just have to find the officer appropriate running on your computer and the configuration management solutions do the rest (and more).  This also has an advantage over #2 that you are not limited to VMware virtual machines.  Drawback is the rise of time to evaluate, select, learn and deploy these but I think in the long term, that worth the effort.

  So, you have a few options here.  Don't forget that you can use all these depending on the use case.  For example, vCO or the vCAC comments Agent can be used to install the agent of the puppet and then the puppets will do the rest.  For an example of what I'm talking about you, see blog of Ryan Kelly on the use of charm vCO with vCAC.  http://www.vmtocloud.com/self-service-application-deployment-with-Vcac-VCO-and-Chef/

• Orchestrator can be used to deploy applications in virtual machines?

  Hey guys,.

  It is a matter of general features.  I spent a few hours trying to figure the best technology to use for deployment of applications within virtual machines.  It looks like vFabric Application Director would be the * best *, but I am also looking to vCenter Orchestrator.  He seems mature, but I don't know if it can be used to deploy applications within a virtual machine (for example, install IIS in a Windows Server 2008 VM).

  Any input would be appreciated, marketing white papers are not totally clear!

  Thank you

  Drew

  You can use the workflow operations comments to run commands install or a complete script to do. This says that you can also use vCO to orchestrate the Application Director as part of an workflow provisioning of end-to-end.

• How can work with installed (RUN-MODE only)

  Jin
  I have request for export in mode single run of APEX online. Now I install this application offline with Upgrade XE with APEX in my machine.
  I XE upgrade and install an application in RUN Mode only. After installation it shows the INSTALLED APPLICATION but application is not EDITABLE.
  Tell me how I can work on this application runing mode.

  Hello

  Run the application and point the browser to URL
  http://127.0.0.1:8080/apex/f? p = app_id

  App_id, where is the number of your application

  BR, Jari

• Applications are not running correctly

  I installed the iOS Update 9 and therefore count my applications do not run the way they were accustomed to, something fishy is going on in the back end, I guess. If anyone has an idea about this then please let me know. I need your help

  Hi Shayadri!

  I understand that your applications do not work properly after installing iOS 9.  I understand how important it is to have your apps working correctly, and I am pleased to offer you some advice.  Please try all the tips in this article to support, and if you're still having problems with third-party applications, you will see instructions to contact the developer of the application of aid.

  If an application you have installed unexpectedly closes, unresponsive, or does not open

  Thank you for using communities of Apple Support.

  See you soon!

• VI does not work properly when run at each full speed or highlight the run mode, but running at full speed after the starting and stopping of the execution mode games

  Start labview, so fix that will probably teach me a lot. Looked and saw a lot of posts of things only work in games of the run mode, but nothing like this. I have attached the relevant real-time and FPGA VI.

  The code is supposed to read a motor encoder. When ran regularly, it works somehow. It will update the counter of how sporadic all few seconds a fraction of a second. When ran in climax run mode, it appears really up-to-date. After that matches the execution mode is canceled, it works perfectly. Can someone find out what could be the problem?

  Ended up staring at me. I am sure that the problem was that if there is only one element in the FIFO when it checks first, it eliminates the two elements when the FIFO filled.

  Fixed it by adding a test for the number of items before and reading only if there are enough items to read. Attached file sets for reference.

  I have still no idea why he was running after delivery to highlight in the first place. We will never know. Bonus points for the answer = P

• How put two windows (both sides) will appear on the same screen together, one behind the other, during run mode?

  In Labview, is it possible to put two windows (both sides) appears on the same screen together, one behind the other, during run mode?

  It's a shame

  Secondary, it's a great way to call subVIs and you load only code when you call it, so it ease your use of resources.

  Anyway, you can call Vi as pop up:

  https://decibel.NI.com/content/docs/doc-2064

  You could split your FP using the separator.

  http://zone.NI.com/reference/en-XX/help/371361J-01/lvhowto/creating_splitter_bars_and_panes/

  Or you can use the control tab.

  http://zone.NI.com/reference/en-XX/help/371361J-01/lvhowto/creating_tab_controls/

  Regars.

• Dynamic of hurried screws remaining in run mode

  This thread is to discuss the question/problem mentioned in the next post. More information coming soon.

  This was reported to R & D (# 157033) for further investigations. In your original post, I noticed that you mentioned that the project not prompt you to save any screws edited when closed.  I however was not able to reproduce this behavior.  The project will always prompt me to save one of the dirty screws.  Even the screw still in run mode.  Is there maybe a corner case is that I'm missing I cannot reproduce this?  Also, thanks for the comments!

• Client/server Push application: how to run the thread listening on basis of the necessity?

  Hello

  To receive the broadcast content from the server, a thread of listening to the need to run in the back ground on the BlackBerry.

  For a client application to receive the server put grows optimally updated, what is the best way?

  1. run the thread listening on the installation of the client application using auto-run on start up?

  What happens to the thread if there are reboot the device? The listener would start again?

  2. run the thread listening on the launch of the client application?

  (or)

  3. is there a way to run the thread to listen according to the need, when there is dissemination of the server, as some notification (called by server) to the client that there is dissemination of the server and the client then begins the listening thread?

  Please contribute your valuable and suggest most commonly followed and best practices.

  Kind regards

  Suresh.

  you don't know. If it's a good thing to do is another question.
  You can use an inboxlistener to receive an email or even a text message with a command to start the pushlistener. But why you want to do something like that? listening on a port, there's nothing that drains the battery.