deployment with motion

Hi all, I am deploying a system that uses the OR 73xx palette. I've implemented a VI called "initialize Motion.vi" that contains the palette 73xx VI, "Initialize Controller.flx". Whenever I have deploy and try to run I get the attached error telling me that the Motion.vi 'initialize' is broken, but I can run the vi on the development PC. Anyone know why this is happening? Thank you, Sean

Hello

You need the movement device driver OR installed on your target system. You can get the depolyment tool to run the installation program NI Motion to the need for the deployment?

Tags: NI Software

Similar Questions

Generators work with Motion 5?

Hello

I have a project and my friend works on the editing part. He bought Apple Motion model for his Final Cut Pro X. But he did not have Apple Motion 5 in his system... He says its not working for him. So there need to install Apple Motion 5 in its system to do things? Generators or Transitions work with Motion 5?... Help, please

Thank you

Praveen

No there not need movement. He needs to install it in the right place, if the generator did not come with an installer or is not a part of FxFactory.

Here are some instructions: http://fcpxtemplates.com/install4fcpx/latest.htm

HTH

Deploy with fpga after change of chassis.

Hello

I'm running a project Veristand 2011 with an NI PXI-8109RT controller, a jury of NI PXI-7852R fpga and analog outputs 5 NI PXI-6733.

For development, I used a chassis PXI-1000 b.

Now, I have moved the system to a PXI-1045 chassis, and I can't deploy the project more.

It gets stuck the "start of the deployment group 1", and after a while, I get a timeout error (-307672).

The only way I deploy the project is to remove the FPGA of the nivssdf and remove the NI PXI-7852R of the chassis.

Of course I need to map FPGA, then... why the project will not deploy with it?

Thank you

Matteo

Hello Matteo,.

The chassis of 1045 (and other PXI chassis with a large number of slots) have several segments of independent PCI bus along the bottom of basket. By default, triggers are not shared between the segments.

So, if you want to synchronize all your cards, one solution is to put all cards in the same bus segment. If this is not possible, you will need to go to MAX and manually map PXI Trig 0 away from your card master sync everywhere for other bus segments. For more information on how to do this, see the following document:

Routing see PXI trigger in the bus chassis PXI crossover

Kind regards

Devin

Firefox 4 deployment with custom user settings?

Hi people,

I want to deploy FF 4.0 with custom user settings, but where is the "localized" my prefs.js file folder? In FF 3.6.x we extract the setup.exe file and with sources, we have deployed our customized firefox. In FF 4.0 now, there is some file missing from news sources. Are there any documents that explain the deployment of FF 4.0? Thank you very much

You can always create a folder/defaults/profile and places the files in this folder to have in a new default profile. Folders that have no content are no longer present in the version of Firefox 4 RC, but some are still read and processed.

Problem with motion control

I have a Lenovo Ideapad Yoga and there is a problem with my order of movement. A pop up window says: 11 hand Form Load Failed. motion control cannot start: what should I do then?

assybish wrote:
I have this problem too what update to windows 8.1 looks like part of the program of control of movement broke out during the upgrade (as did several other - Bravo M * you) have tried Lenovo support and their stock answer to every problem is factory reset and return to windows 8 (and lose all your installed programs (, etc. >!) If any staff of Lenovo never read this please get a grip going back to win 8 is not the answer! Lenovo should provide for download or via a software of rescovery dvd for their applcations.

http://support.Lenovo.com/en_US/downloads/detail.page?docid=DS041312

VeriStand 2015 will not deploy with Labview created model: error-307703

I try to use a model of labview to resume a few calculated channels that are currently in one of my projects veristand. Without the LV model, it works fine. But after you import the model and connection of all inputs and outputs, he used to "deploy. Gives the error-307703 during the deployment. More information in the log below.

I use Veristand 2015 and LabView 2015 also. I put the inputs and outputs correctly in the connector pane, and when you import the model into Veristand, the inputs and outputs appear correctly. "" When I use the "Tools" NI VeriStand "generate NI VeriStand model of VI ' there is no errors and it creates a LVmodel that I can import into veristand.

Are there steps that I missed? Or troubleshooting tips for tweaking my design to accept a LVmodel?

* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
VeriStand gateway has encountered an error while deploying the system definition file.

Details:
307703 error occurred at Window.lvlib projectWindow.vi project > Project Window.lvlib:Command Loop.vi > NI_VS Workspace ExecutionAPI.lvlib: NI VeriStand - connect to System.vi

Possible reasons:

NEITHER VeriStand: The specified model is not compatible with NI VeriStand. If you try to deploy the model to an RT target, launch the Console Viewer tool to view the output of the console of the target, which includes information about the source of the error.
=========================
NEITHER VeriStand: .vi Wrapper (RT) of the NI VeriStand Engine.lvlib:VeriStand engine > Engine.vi Engine.lvlib:VeriStand NI VeriStand > NI VeriStand Engine.lvlib:VeriStand state motor Machine.vi > model model Execution.lvlib:Initialize loop Data.vi > SIT model API.lvlib:Initialize Model.vi
=========================
NEITHER VeriStand: Initialization error Code 1

Please I need advice for deployment with multiple screen resolutions

Hello

Sorry for my English

I am developing a project in labview with a PC (screen resolution 1920 * 1080) and I need to deploy to run on a PC with (screen resolution 1024 * 768 10 "), I use several spliters for this so I need some advice to make sure my exe not working

very well in this PC target so I need to know how to configure my principal vi; size of the window in the execution; etc... in my PC all work fine I can reduce window and blow it up when the project is running and all the objects have been scaling very

well I don't know what will happen in this target pc.

advice and assistance please

Hey Broutchoux,.

Here are some links of the knowledge base that relate to this issue.

http://digital.NI.com/public.nsf/allkb/7567EF257B9CFDF986256F630073228F?OpenDocument

http://digital.NI.com/public.nsf/allkb/4C03BE7BFD1D00948625670B0061CB6A?OpenDocument

I hope this helps!

Failures of deployment with systems - SCCM precision 2012 R2 using MDT to deploy Win7

I managed to deploy several types of Latitudes and OptiPlexes using the driver cabins here to create packages of drivers. However, I can't deploy precision systems - in this case, T3600s and M4700s are both in check at the same place - pilot phase of injection. The smsts journal and the dism log indicate that the first pilot injected image offline successfully but fail when you try to inject the second pilot.

Copied from the logs:

smsts.log:

The content downloaded successfully to E:\_SMSTaskSequence\Packages\RD100068.
Added "E:\_SMSTaskSequence\Packages\RD100068\02D6A840-36FF-4651-B6A6-92CBE69D08A5" to the Windows driver store.
Definition of % SystemRoot % 'E:\WINDOWS.
Get namespace "Microsoft-Windows-PnpCustomizationsNonWinPE" of architecture "amd64".
List element added with the value of the key "1"
Writing of the configuration in E:\_SMSTaskSequence\PkgMgrTemp\drivers.xml information
Backup configuration information in E:\_SMSTaskSequence\PkgMgrTemp\drivers.xml
Definition of temporary directory to "E:\_SMSTaskSequence\PkgMgrTemp".
Calling the Package manager to add the drivers to the driver offline store.
Command line for the .exe extension is '%1' % *.
"" Set command line: 'X:\WINDOWS\system32\dism.exe' / / image: / "E:" windir: 'WINDOWS' /apply-unattend:"E:\_SMSTaskSequence\PkgMgrTemp\drivers.xml ' /logpath:"E:\_SMSTaskSequence\PkgMgrTemp\dism.log '.
"" Run command line: 'X:\WINDOWS\system32\dism.exe' / / image: / "E:" windir: 'WINDOWS' /apply-unattend:"E:\_SMSTaskSequence\PkgMgrTemp\drivers.xml ' /logpath:"E:\_SMSTaskSequence\PkgMgrTemp\dism.log '.
Process is completed with exit code 0
DISM pilots successfully added to the driver offline store.
Successfully added "E:\_SMSTaskSequence\Packages\RD100068\02D6A840-36FF-4651-B6A6-92CBE69D08A5" in the Windows driver store.
Added "E:\_SMSTaskSequence\Packages\RD100068\0B458F91-49A9-41F0-948E-F69800676CA0" to the Windows driver store.
Definition of % SystemRoot % 'E:\WINDOWS.
Get namespace "Microsoft-Windows-PnpCustomizationsNonWinPE" of architecture "amd64".
List element added with the value of the key "1"
Writing of the configuration in E:\_SMSTaskSequence\PkgMgrTemp\drivers.xml information
Backup configuration information in E:\_SMSTaskSequence\PkgMgrTemp\drivers.xml
Definition of temporary directory to "E:\_SMSTaskSequence\PkgMgrTemp".
Calling the Package manager to add the drivers to the driver offline store.
Command line for the .exe extension is '%1' % *.
"" Set command line: 'X:\WINDOWS\system32\dism.exe' / / image: / "E:" windir: 'WINDOWS' /apply-unattend:"E:\_SMSTaskSequence\PkgMgrTemp\drivers.xml ' /logpath:"E:\_SMSTaskSequence\PkgMgrTemp\dism.log '.
"" Run command line: 'X:\WINDOWS\system32\dism.exe' / / image: / "E:" windir: 'WINDOWS' /apply-unattend:"E:\_SMSTaskSequence\PkgMgrTemp\drivers.xml ' /logpath:"E:\_SMSTaskSequence\PkgMgrTemp\dism.log '.
Process is completed with exit code 2147500037
uExitCode == 0, HRESULT = 80004005 (e:\nts_sccm_release\sms\client\osdeployment\osddriverclient\sysprepdriverinstaller.cpp,548)
DISM failed with return code - 2147467259
AddPnPDriverToStore (pszSource, sTargetSystemDrive, sTargetSystemRoot, wProcessorArchitecture), HRESULT = 80004005 (e:\nts_sccm_release\sms\client\osdeployment\osddriverclient\sysprepdriverinstaller.cpp,658)
AddPnPDriverToStore (pszSource, sTargetSystemDrive, sTargetSystemRoot, wProcessorArchitecture), HRESULT = 80004005 (e:\nts_sccm_release\sms\client\osdeployment\osddriverclient\sysprepdriverinstaller.cpp,658)
Cannot add the store driver to driver. Code 0x80004005
InstallDriver (iInstallParams-> sContentId, iInstallParams-> Usualssource, iInstallParams-> pBootCriticalInfo), HRESULT = 80004005 (e:\nts_sccm_release\sms\client\osdeployment\osddriverclient\driverinstaller.cpp,557)
ReleaseSource() for E:\_SMSTaskSequence\Packages\RD100068.
number 1 for the source of reference before releasing E:\_SMSTaskSequence\Packages\RD100068
Resolved source E:\_SMSTaskSequence\Packages\RD100068 output
pDriverInstaller-> InstallDriverPackage (sPackageId, pBootCriticalInfo), HRESULT = 80004005 (e:\nts_sccm_release\sms\client\osdeployment\osddriverclient\osddriverclient.cpp,380)
Cannot configure the driver. Code 0x80004005
Exit with return code 0x80004005
Process is completed with exit code 2147500037
!--------------------------------------------------------------------------------------------!
Cannot run action: apply Driver Package - T3600 precision.
Unspecified error (error: 80004005;) Source: Windows)

DISM.log:

PID = 1624 TID = 1796 Scratch directory set to "E:\_SMSTaskSequence\PkgMgrTemp\". -CDISMManager::put_ScratchDir
PID = 1624 TID = 1796 DismCore.dll version: 6.3.9600.16384 - CDISMManager::FinalConstruct
PID = 1624 TID = 1796 successfully loaded the ImageSession to "X:\WINDOWS\System32\Dism" - CDISMManager::LoadLocalImageSession
DISM store provider: PID = 1624 TID = 1796 found and initialized the DISM log. -CDISMProviderStore::Internal_InitializeLogger
DISM store provider: PID = 1624 TID = 1796 could not obtain and initialize the provider PE. Continue to assume this isn't a WinPE image. -CDISMProviderStore::Final_OnConnect
DISM store provider: PID = 1624 TID = 1796 completed initialization of the provider card. -CDISMProviderStore::Final_OnConnect
DISM store provider: PID = 1624 TID = 1796 get provider DISMLogger - CDISMProviderStore::GetProvider
DISM store provider: PID = 1624 TID = 1796 provider has already been initialized. Returns the existing instance. -CDISMProviderStore::Internal_GetProvider
DISM store provider: PID = 1624 TID = 1796 get provider DISMLogger - CDISMProviderStore::GetProvider
DISM store provider: PID = 1624 TID = 1796 provider has already been initialized. Returns the existing instance. -CDISMProviderStore::Internal_GetProvider
DISM Manager: PID = 1624 TID is 1796 managed to create the session store and supplier of local image. -CDISMManager::CreateLocalImageSession
DISM store provider: PID = 1624 TID = 1796 get provider DISMLogger - CDISMProviderStore::GetProvider
DISM store provider: PID = 1624 TID = 1796 provider has already been initialized. Returns the existing instance. -CDISMProviderStore::Internal_GetProvider
DISM. EXE:
DISM. EXE:<----- starting="" dism.exe="" session="" -----="">
DISM. EXE:
DISM. EXE: Host machine information: OS Version = 6.3.9600, operation architecture = x 86, number of CPUs = 4
DISM. EXE: Version of Dism.exe: 6.3.9600.16384
DISM. "" EXE: run command line: 'X:\WINDOWS\system32\dism.exe' / / image: / "E:" windir: 'WINDOWS' /apply-unattend:"E:\_SMSTaskSequence\PkgMgrTemp\drivers.xml ' /logpath:"E:\_SMSTaskSequence\PkgMgrTemp\dism.log '.
DISM store provider: PID = 1624 TID = 1796 get collection of suppliers with a local provider store type. -CDISMProviderStore::GetProviderCollection
DISM store provider: PID = 1624 TID = 1796 provider has not been met. Attempt to initialize the provider. -CDISMProviderStore::Internal_GetProvider
DISM store provider: PID = 1624 TID = 1796 loading location provider X:\WINDOWS\System32\Dism\FolderProvider.dll - CDISMProviderStore::Internal_GetProvider
DISM store provider: PID = 1624 TID = 1796 connection to the provider located at X:\WINDOWS\System32\Dism\FolderProvider.dll. -CDISMProviderStore::Internal_LoadProvider
DISM store provider: PID = 1624 TID = 1796 provider has not been met. Attempt to initialize the provider. -CDISMProviderStore::Internal_GetProvider
DISM store provider: PID = 1624 TID = 1796 loading location provider X:\WINDOWS\System32\Dism\WimProvider.dll - CDISMProviderStore::Internal_GetProvider
DISM store provider: PID = 1624 TID = 1796 connection to the provider located at X:\WINDOWS\System32\Dism\WimProvider.dll. -CDISMProviderStore::Internal_LoadProvider
DISM store provider: PID = 1624 TID = 1796 provider has not been met. Attempt to initialize the provider. -CDISMProviderStore::Internal_GetProvider
DISM store provider: PID = 1624 TID = 1796 loading location provider X:\WINDOWS\System32\Dism\VHDProvider.dll - CDISMProviderStore::Internal_GetProvider
DISM store provider: PID = 1624 TID = 1796 connection to the provider located at X:\WINDOWS\System32\Dism\VHDProvider.dll. -CDISMProviderStore::Internal_LoadProvider
DISM store provider: PID = 1624 TID = 1796 provider has not been met. Attempt to initialize the provider. -CDISMProviderStore::Internal_GetProvider
DISM store provider: PID = 1624 TID = 1796 loading location provider X:\WINDOWS\System32\Dism\ImagingProvider.dll - CDISMProviderStore::Internal_GetProvider
DISM store provider: PID = 1624 TID = 1796 connection to the provider located at X:\WINDOWS\System32\Dism\ImagingProvider.dll. -CDISMProviderStore::Internal_LoadProvider
DISM store provider: PID = 1624 TID = 1796 provider has not been met. Attempt to initialize the provider. -CDISMProviderStore::Internal_GetProvider
DISM store provider: PID = 1624 TID = 1796 loading location provider X:\WINDOWS\System32\Dism\CompatProvider.dll - CDISMProviderStore::Internal_GetProvider
DISM store provider: PID = 1624 TID = 1796 connection to the provider located at X:\WINDOWS\System32\Dism\CompatProvider.dll. -CDISMProviderStore::Internal_LoadProvider
DISM. EXE: Got the provider collection. Now list to build the control panel.
DISM. EXE: Try to add the provider controls: DISM log provider
DISM. EXE: Attempting to add provider orders: FolderManager
DISM. EXE: Attempting to add provider orders: WimManager
DISM. EXE: Successfully recorded commands to the provider: WimManager.
DISM. EXE: Attempting to add provider orders: VHDManager
DISM. EXE: Attempting to add provider orders: GenericImagingManager
DISM. EXE: Successfully recorded commands to the provider: GenericImagingManager.
DISM. EXE: Try to add the provider controls: Compatibility Manager
DISM. EXE: Successfully recorded orders for the supplier: Compatibility Manager.
DISM store provider: PID = 1624 TID = 1796 get collection of suppliers with a local provider store type. -CDISMProviderStore::GetProviderCollection
[1624] [0 x 80070002] FIOReadFileIntoBuffer: (1415): the system cannot find the specified file.
UnmarshallImageHandleFromDirectory: (511) [1624] [0xc142011c]
WIMGetMountedImageHandle: (2568) [1624] [0xc142011c]
DISM WIM provider: PID = 1624 TID = 1796 [E:\] is not a WIM mount point. -CWimMountedImageInfo::Initialize
DISM VHD provider: PID = 1624 TID = 1796 [E:\] is not recognized by the provider of the DISM VHD. -CVhdImage::Initialize
DISM store provider: PID = 1624 TID = 1796 get provider VHDManager - CDISMProviderStore::GetProvider
DISM store provider: PID = 1624 TID = 1796 provider has already been initialized. Returns the existing instance. -CDISMProviderStore::Internal_GetProvider
DISM VHD provider: PID = 1624 TID = 1796 [E:\] is not recognized by the provider of the DISM VHD. -CVhdImage::Initialize
DISM imagery provider: PID = 1624 TID = 1796 VHDManager provider does not support CreateDismImage on E:\ - CGenericImagingManager::CreateDismImage
DISM store provider: PID = 1624 TID = 1796 get provider WimManager - CDISMProviderStore::GetProvider
DISM store provider: PID = 1624 TID = 1796 provider has already been initialized. Returns the existing instance. -CDISMProviderStore::Internal_GetProvider
[1624] [0 x 80070002] FIOReadFileIntoBuffer: (1415): the system cannot find the specified file.
UnmarshallImageHandleFromDirectory: (511) [1624] [0xc142011c]
WIMGetMountedImageHandle: (2568) [1624] [0xc142011c]
DISM WIM provider: PID = 1624 TID = 1796 [E:\] is not a WIM mount point. -CWimMountedImageInfo::Initialize
DISM imagery provider: PID = 1624 TID = 1796 WimManager provider does not support CreateDismImage on E:\ - CGenericImagingManager::CreateDismImage
DISM imagery provider: PID = 1624 TID = 1796 no provider Imaging CreateDismImage of decision-making support for this path - CGenericImagingManager::CreateDismImage
DISM Manager: PID = 1624 TID = 1796 physical path: E:\ - CDISMManager::CreateImageSession
DISM Manager: PID = 1624 TID = 1796 DISM copy of "E:\WINDOWS\SysWOW64\dism" - CDISMManager::CreateImageSessionFromLocation
DismHostLib: Directory of forwarders returned does not exist; do not change your environment dismhost.exe.
DISM Manager: PID = 1624 TID = 1796 successfully loaded the ImageSession to "E:\_SMSTaskSequence\PkgMgrTemp\AE5F74B5-689E-40A8-B680-7A151B341EA5" - CDISMManager::LoadRemoteImageSession
DISM Image Session: PID is 1944 instantiating the provider store. -CDISMImageSession::get_ProviderStore
DISM store provider: PID = 1944 initialization of a store for the type of session IMAGE provider. -CDISMProviderStore::Final_OnConnect
DISM store provider: PID = 1944 provider has not been met. Attempt to initialize the provider. -CDISMProviderStore::Internal_GetProvider
DISM store provider: PID = 1944 loading location provider E:\_SMSTaskSequence\PkgMgrTemp\AE5F74B5-689E-40A8-B680-7A151B341EA5\OSProvider.dll - CDISMProviderStore::Internal_GetProvider
DISM store provider: PID = 1944 connection to the provider located at E:\_SMSTaskSequence\PkgMgrTemp\AE5F74B5-689E-40A8-B680-7A151B341EA5\OSProvider.dll. -CDISMProviderStore::Internal_LoadProvider
DISM operating system provider: PID = 1944 SystemPath failing to E:\ - CDISMOSServiceManager::Final_OnConnect
DISM operating system provider: PID = 1944 cannot copy msxml6.dll in the client's executable file in the dismhost.exe folder. Relying on the boxed version. -CDISMOSServiceManager::RunASICompatibilityShim
DISM operating system provider: PID = default Windows from 1944 to E:\Windows - CDISMOSServiceManager::Final_OnConnect folder
DISM store provider: PID = 1944 attempt to initialize the Session of the Image recorder. -CDISMProviderStore::Final_OnConnect
DISM store provider: PID = 1944 provider has not been met. Attempt to initialize the provider. -CDISMProviderStore::Internal_GetProvider
DISM store provider: PID = 1944 loading location provider E:\_SMSTaskSequence\PkgMgrTemp\AE5F74B5-689E-40A8-B680-7A151B341EA5\LogProvider.dll - CDISMProviderStore::Internal_GetProvider
DISM store provider: PID = 1944 connection to the provider located at E:\_SMSTaskSequence\PkgMgrTemp\AE5F74B5-689E-40A8-B680-7A151B341EA5\LogProvider.dll. -CDISMProviderStore::Internal_LoadProvider
DISM store provider: PID = 1944 get provider OSServices - CDISMProviderStore::GetProvider
DISM store provider: PID = 1944 provider has already been initialized. Returns the existing instance. -CDISMProviderStore::Internal_GetProvider
DISM store provider: PID = 1944 found and initialized the DISM log. -CDISMProviderStore::Internal_InitializeLogger
DISM store provider: PID = 1944 provider has not been met. Attempt to initialize the provider. -CDISMProviderStore::Internal_GetProvider
DISM store provider: PID = 1944 loading location provider E:\_SMSTaskSequence\PkgMgrTemp\AE5F74B5-689E-40A8-B680-7A151B341EA5\PEProvider.dll - CDISMProviderStore::Internal_GetProvider
DISM store provider: PID = 1944 failed to load provider: E:\_SMSTaskSequence\PkgMgrTemp\AE5F74B5-689E-40A8-B680-7A151B341EA5\PEProvider.dll. -CDISMProviderStore:Internal_GetProvider(hr:0x8007007e)
DISM store provider: PID = 1944 could not obtain and initialize the provider PE. Continue to assume this isn't a WinPE image. -CDISMProviderStore::Final_OnConnect
DISM store provider: PID = 1944 completed initialization of the provider card. -CDISMProviderStore::Final_OnConnect
DISM store provider: PID = 1944 get provider DISMLogger - CDISMProviderStore::GetProvider
DISM store provider: PID = 1944 provider has already been initialized. Returns the existing instance. -CDISMProviderStore::Internal_GetProvider
DISM Manager: PID = 1624 TID = 1796 Image session correctly charged to the temporary location: E:\_SMSTaskSequence\PkgMgrTemp\AE5F74B5-689E-40A8-B680-7A151B341EA5 - CDISMManager::CreateImageSession
DISM store provider: PID = 1944 get provider OSServices - CDISMProviderStore::GetProvider
DISM store provider: PID = 1944 provider has already been initialized. Returns the existing instance. -CDISMProviderStore::Internal_GetProvider
DISM operating system provider: PID = SystemPath started in 1944 E:\ - CDISMOSServiceManager::SetSystemPath
00000001 considered shim [l:252 {126}] '------? \E:\Windows\Servicing\x86_microsoft-Windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_0b0e4b4025cf4049\pkgmgr.exe': had STATUS_OBJECT_PATH_NOT_FOUND
Shim 00000002 considered [l:246 {123}] '------? \E:\Windows\WinSxS\x86_microsoft-Windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_0b0e4b4025cf4049\pkgmgr.exe': had STATUS_SUCCESS
DISM. EXE: Target image information: Version = 6.1.7601.17592 OS, architecture of the Image = amd64
DISM store provider: PID = 1944 get the provider to a provider of image collection type store. -CDISMProviderStore::GetProviderCollection
DISM store provider: PID = 1944 provider has not been met. Attempt to initialize the provider. -CDISMProviderStore::Internal_GetProvider
DISM store provider: PID = 1944 loading location provider E:\_SMSTaskSequence\PkgMgrTemp\AE5F74B5-689E-40A8-B680-7A151B341EA5\CbsProvider.dll - CDISMProviderStore::Internal_GetProvider
DISM store provider: PID = 1944 connection to the provider located at E:\_SMSTaskSequence\PkgMgrTemp\AE5F74B5-689E-40A8-B680-7A151B341EA5\CbsProvider.dll. -CDISMProviderStore::Internal_LoadProvider
DISM store provider: PID = 1944 encountered a service provider, execute the additional maintenance initializations. -CDISMProviderStore::Internal_LoadProvider
00000001 considered shim [l:252 {126}] '------? \E:\Windows\Servicing\x86_microsoft-Windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_0b0e4b4025cf4049\pkgmgr.exe': had STATUS_OBJECT_PATH_NOT_FOUND
Shim 00000002 considered [l:246 {123}] '------? \E:\Windows\WinSxS\x86_microsoft-Windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_0b0e4b4025cf4049\pkgmgr.exe': had STATUS_SUCCESS
DISM Package Manager: PID = 1944 completed initialization of the CbsConUI Manager. -CCbsConUIHandler::Initialize
00000001 considered shim [l:252 {126}] '------? \E:\Windows\Servicing\x86_microsoft-Windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_0b0e4b4025cf4049\pkgmgr.exe': had STATUS_OBJECT_PATH_NOT_FOUND
Shim 00000002 considered [l:246 {123}] '------? \E:\Windows\WinSxS\x86_microsoft-Windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_0b0e4b4025cf4049\pkgmgr.exe': had STATUS_SUCCESS
Transactions disabled in the registry, continuing without transaction support.
The core transactions are disabled, continuing without transaction support.
Cannot find a matching version for the servicing stack: E:\Windows\WinSxS\x86_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_0b0e4b4025cf4049\ [HRESULT = 0 x 80070490 - ERROR_NOT_FOUND]
Cannot find the directory stack service in the online store. [HRESULT = 0 X 80070490 - ERROR_NOT_FOUND]
To do in offline mode, the refuelling by using the version of the stack of: E:\Windows\WinSxS\x86_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_0b0e4b4025cf4049\cbscore.dll
Load v6.1.7601.17592 Servicing Stack with Core: E:\Windows\WinSxS\x86_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_0b0e4b4025cf4049\cbscore.dll
00000001@2014/2/12:00:13:37.512 WcpInitialize (version 0.0.0.6 wcp.dll) called (battery @0x713ede79 @0x71625d7d @0x7160205a @0x716d94f2 @0x716d96b9 @0x716b8e39)
Could not load SrClient DLL path: C:\windows\system32\srclient.dll. Continue without the system restore points.
00000002@2014/2/12:00:13:37.512 WcpInitialize (version 0.0.0.6 wcp.dll) called (battery @0x713ede79 @0 x 71667183 @0 x 71664013 @0x716d94f2 @0x716d96b9 @0x716b8e39)
DISM Package Manager: PID = 1944 Loaded battery for offline use only maintenance. -CDISMPackageManager::RefreshInstanceAndLock
Loading offline registry hive: SOFTWARE in the registry key ' {bf1a281b-ad7b-4476-ac95-f47682990ce7} e: / Windows/System32/config/SOFTWARE ' the path '\\?\E:\Windows\System32\config\SOFTWARE '.
Loading offline registry hive: SYSTEM, in the registry key ' {bf1a281b-ad7b-4476-ac95-f47682990ce7} e: / Windows/System32/config/SYSTEM "path"\\?\E:\Windows\System32\config\SYSTEM ".
Loading offline registry hive: security key in the registry "{bf1a281b-ad7b-4476-ac95-f47682990ce7} e: / Windows/System32/config/SECURITY ' the path '\\?\E:\Windows\System32\config\SECURITY '.
Loading offline registry hive: SAM, in the registry key ' {bf1a281b-ad7b-4476-ac95-f47682990ce7} e: / Windows/System32/config/SAM ' the path '\\?\E:\Windows\System32\config\SAM '.
Loading offline registry hive: COMPONENTS in the registry key ' {bf1a281b-ad7b-4476-ac95-f47682990ce7} e: / Windows/System32/config/COMPONENTS "of the path '\\?\E:\Windows\System32\config\COMPONENTS '.
Loading offline registry hive: by DEFAULT, the registry key ' {bf1a281b-ad7b-4476-ac95-f47682990ce7} e: / Windows/System32/config/DEFAULT ' the path '\\?\E:\Windows\System32\config\DEFAULT '.
Loading offline registry hive: ntuser.dat in the registry key ' {bf1a281b-ad7b-4476-ac95-f47682990ce7}E:/Users/default/ntuser.dat' path '\\?\E:\Users\default\ntuser.dat'.}
Loading offline registry hive: schema.dat, in the registry key ' {bf1a281b-ad7b-4476-ac95-f47682990ce7}E:/Windows/system32/smi/store/Machine/schema.dat' path '\\?\E:\Windows\system32\smi\store\Machine\schema.dat'.}
Image offline is: writable
00000003 CSI 18012584 (0x0112d9a8) store initialized
Session: 1944_7162296 initialized by the client of DISM Package Manager provider.
DISM Package Manager: PID = 1944 Loaded battery for offline use only maintenance. -CDISMPackageManager::RefreshInstanceAndLock
DISM Package Manager: PID = 1944 Loaded battery for use online only for maintenance. -CDISMPackageManager::RefreshInstanceAndLock
DISM store provider: PID = 1944 provider has not been met. Attempt to initialize the provider. -CDISMProviderStore::Internal_GetProvider
DISM store provider: PID = 1944 loading location provider E:\_SMSTaskSequence\PkgMgrTemp\AE5F74B5-689E-40A8-B680-7A151B341EA5\MsiProvider.dll - CDISMProviderStore::Internal_GetProvider
DISM store provider: PID = 1944 connection to the provider located at E:\_SMSTaskSequence\PkgMgrTemp\AE5F74B5-689E-40A8-B680-7A151B341EA5\MsiProvider.dll. -CDISMProviderStore::Internal_LoadProvider
DISM store provider: PID = 1944 encountered a service provider, execute the additional maintenance initializations. -CDISMProviderStore::Internal_LoadProvider
DISM store provider: PID = 1944 provider has not been met. Attempt to initialize the provider. -CDISMProviderStore::Internal_GetProvider
DISM store provider: PID = 1944 loading location provider E:\_SMSTaskSequence\PkgMgrTemp\AE5F74B5-689E-40A8-B680-7A151B341EA5\IntlProvider.dll - CDISMProviderStore::Internal_GetProvider
DISM store provider: PID = 1944 connection to the provider located at E:\_SMSTaskSequence\PkgMgrTemp\AE5F74B5-689E-40A8-B680-7A151B341EA5\IntlProvider.dll. -CDISMProviderStore::Internal_LoadProvider
DISM store provider: PID = 1944 encountered a service provider, execute the additional maintenance initializations. -CDISMProviderStore::Internal_LoadProvider
DISM store provider: PID = 1944 provider has not been met. Attempt to initialize the provider. -CDISMProviderStore::Internal_GetProvider
DISM store provider: PID = 1944 loading location provider E:\_SMSTaskSequence\PkgMgrTemp\AE5F74B5-689E-40A8-B680-7A151B341EA5\DmiProvider.dll - CDISMProviderStore::Internal_GetProvider
DISM store provider: PID = 1944 connection to the provider located at E:\_SMSTaskSequence\PkgMgrTemp\AE5F74B5-689E-40A8-B680-7A151B341EA5\DmiProvider.dll. -CDISMProviderStore::Internal_LoadProvider
DISM store provider: PID = 1944 encountered a service provider, execute the additional maintenance initializations. -CDISMProviderStore::Internal_LoadProvider
00000001 considered shim [l:252 {126}] '------? \E:\Windows\Servicing\x86_microsoft-Windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_0b0e4b4025cf4049\pkgmgr.exe': had STATUS_OBJECT_PATH_NOT_FOUND
Shim 00000002 considered [l:246 {123}] '------? \E:\Windows\WinSxS\x86_microsoft-Windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_0b0e4b4025cf4049\pkgmgr.exe': had STATUS_SUCCESS
DISM operating system provider: PID = 1944 get the path of registry to the SOFTWARE hive located in E:\Windows\system32\config\SOFTWARE and determine if it is loaded. -CDISMOSServiceManager::DetermineBootDrive
DISM driver manager: PID = 1944 other newspapers for pilot operations can be found in the operating system the target to %WINDIR%\inf\setupapi.offline.log - CDriverManager::Initialize
DISM store provider: PID = 1944 provider has not been met. Attempt to initialize the provider. -CDISMProviderStore::Internal_GetProvider
DISM store provider: PID = 1944 loading location provider E:\_SMSTaskSequence\PkgMgrTemp\AE5F74B5-689E-40A8-B680-7A151B341EA5\UnattendProvider.dll - CDISMProviderStore::Internal_GetProvider
DISM store provider: PID = 1944 connection to the provider located at E:\_SMSTaskSequence\PkgMgrTemp\AE5F74B5-689E-40A8-B680-7A151B341EA5\UnattendProvider.dll. -CDISMProviderStore::Internal_LoadProvider
DISM store provider: PID = 1944 encountered a service provider, execute the additional maintenance initializations. -CDISMProviderStore::Internal_LoadProvider
DISM store provider: PID = 1944 provider has not been met. Attempt to initialize the provider. -CDISMProviderStore::Internal_GetProvider
DISM store provider: PID = 1944 loading location provider E:\_SMSTaskSequence\PkgMgrTemp\AE5F74B5-689E-40A8-B680-7A151B341EA5\SmiProvider.dll - CDISMProviderStore::Internal_GetProvider
DISM store provider: PID = 1944 connection to the provider located at E:\_SMSTaskSequence\PkgMgrTemp\AE5F74B5-689E-40A8-B680-7A151B341EA5\SmiProvider.dll. -CDISMProviderStore::Internal_LoadProvider
DISM store provider: PID = 1944 encountered a service provider, execute the additional maintenance initializations. -CDISMProviderStore::Internal_LoadProvider
DISM store provider: PID = 1944 provider has not been met. Attempt to initialize the provider. -CDISMProviderStore::Internal_GetProvider
DISM store provider: PID = 1944 loading location provider E:\_SMSTaskSequence\PkgMgrTemp\AE5F74B5-689E-40A8-B680-7A151B341EA5\TransmogProvider.dll - CDISMProviderStore::Internal_GetProvider
DISM store provider: PID = 1944 connection to the provider located at E:\_SMSTaskSequence\PkgMgrTemp\AE5F74B5-689E-40A8-B680-7A151B341EA5\TransmogProvider.dll. -CDISMProviderStore::Internal_LoadProvider
DISM store provider: PID = 1944 encountered a service provider, execute the additional maintenance initializations. -CDISMProviderStore::Internal_LoadProvider
DISM store provider: PID = 1944 get provider DISM Package Manager - CDISMProviderStore::GetProvider
DISM store provider: PID = 1944 provider has already been initialized. Returns the existing instance. -CDISMProviderStore::Internal_GetProvider
DISM store provider: PID = 1944 get provider DISM Unattend Manager - CDISMProviderStore::GetProvider
DISM store provider: PID = 1944 provider has already been initialized. Returns the existing instance. -CDISMProviderStore::Internal_GetProvider
DISM. EXE: Got the provider collection. Now list to build the control panel.
DISM. EXE: Try to add the provider controls: DISM Package Manager
DISM. EXE: Successfully recorded orders for the vendor: of DISM Package Manager.
DISM. EXE: Attempting to add provider orders: OSServices
DISM. EXE: Attempting to add provider orders: MsiManager
DISM. EXE: Successfully recorded commands to the provider: MsiManager.
DISM. EXE: Attempting to add provider orders: IntlManager
DISM. EXE: Successfully recorded commands to the provider: IntlManager.
DISM. EXE: Try to add the provider controls: DriverManager
DISM. EXE: Successfully recorded orders for the supplier: DriverManager.
DISM. EXE: Try to add the provider controls: DISM Unattend Manager
DISM. EXE: Successfully recorded orders for the supplier: DISM Unattend Manager.
DISM. EXE: Try to add the provider controls: DISM log provider
DISM. EXE: Attempting to add provider orders: SmiManager
DISM. EXE: Attempting to add provider orders: Edition Manager
DISM Transmog provider: PID = 1944 session current image is [offline] - CTransmogManager::GetMode
DISM. EXE: Successfully recorded orders for the supplier: Edition Manager.
DISM store provider: PID = 1944 get provider DISM Unattend Manager - CDISMProviderStore::GetProvider
DISM store provider: PID = 1944 provider has already been initialized. Returns the existing instance. -CDISMProviderStore::Internal_GetProvider
DISM store provider: PID = 1944 get provider DISM Package Manager - CDISMProviderStore::GetProvider
DISM store provider: PID = 1944 provider has already been initialized. Returns the existing instance. -CDISMProviderStore::Internal_GetProvider
DISM Package Manager: PID = 1944 node not found. Nothing to do. -CPackageManagerUnattendHandler::Apply
DISM store provider: PID = 1944 get provider SmiManager - CDISMProviderStore::GetProvider
DISM store provider: PID = 1944 provider has already been initialized. Returns the existing instance. -CDISMProviderStore::Internal_GetProvider
00000001 considered shim [l:252 {126}] '------? \E:\Windows\Servicing\x86_microsoft-Windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_0b0e4b4025cf4049\pkgmgr.exe': had STATUS_OBJECT_PATH_NOT_FOUND
Shim 00000002 considered [l:246 {123}] '------? \E:\Windows\WinSxS\x86_microsoft-Windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_0b0e4b4025cf4049\pkgmgr.exe': had STATUS_SUCCESS
DISM Smi provider: PID = 1944 SMI provider selected "offlineServicing" maintenance pass. - CSmiWrapper::ApplySettings
00000004@2014/2/12:00:13:37.743 WcpInitialize (version 0.0.0.6 wcp.dll) called (battery @0x713ede79 @0x70dae316 @0x70dc0059 @0x70d9ae39 @0x70d9a9cc @0x70e81d6b)
DISM Smi provider: PID = 1944 list components defining the following substitutions:-CSmiWrapper::ApplySettings
DISM Smi provider: PID = overload parameters 1944 successfully applied to the component [Microsoft-Windows-PnpCustomizationsNonWinPE, Culture = neutral, Version = 6.1.7601.17514, PublicKeyToken = 31bf3856ad364e35, ProcessorArchitecture = amd64, versionScope = NonSxS] - CSmiWrapper:ApplySettings
DISM Smi provider: PID = 1944 end of list. -CSmiWrapper::ApplySettings
DISM store provider: PID = 1944 get provider DriverManager - CDISMProviderStore::GetProvider
DISM store provider: PID = 1944 provider has already been initialized. Returns the existing instance. -CDISMProviderStore::Internal_GetProvider
DISM driver manager: PID = 1944 ENTER InstallDriversOffline (HRESULT = 0 x 0) - DriversCallback
DISM driver manager: PID = path of the Windows directory offline parameter 1944: "E:\Windows" (HRESULT = 0 x 0) - DriversCallback
DISM driver manager: PID = 1944 setting the system to reboot drive offline: "C:" (HRESULT = 0 x 0) - DriversCallback
DISM driver manager: PID = 1944 Offline Image has "PROCESSOR_ARCHITECTURE_AMD64" (HRESULT = 0 x 0) - DriversCallback
DISM driver manager: PID = 1944 user has administrator privileges. (HRESULT = 0 x 0) - DriversCallback
DISM driver manager: PID = SOFTWARE Offline 1944 hive located in the: E:\Windows\system32\config\SOFTWARE (HRESULT = 0 x 0) - DriversCallback
DISM driver manager: PID = 1944 the key name of the hive loaded {bf1a281b-ad7b-4476-ac95-f47682990ce7} e: / Windows/system32/config/SOFTWARE (HRESULT = 0 x 0) - DriversCallback
DISM driver manager: PID = 1944 Found "1" button (HRESULT = 0 x 0) - DriversCallback
DISM driver manager: PID = 1944 '1' treatment... (HRESULT = 0 x 0) - DriversCallback
DISM driver manager: PID = 1944 path = "E:\_SMSTaskSequence\Packages\RD100068\02D6A840-36FF-4651-B6A6-92CBE69D08A5" (HRESULT = 0 x 0) - DriversCallback
DISM driver manager: PID = 1944 without credentials provided (HRESULT = 0 x 0) - DriversCallback
DISM driver manager: PID = the SYSTEM offline 1944 hive located in the: E:\Windows\system32\config\SYSTEM (HRESULT = 0 x 0) - DriversCallback
DISM driver manager: PID = 1944 the key name of the hive loaded {bf1a281b-ad7b-4476-ac95-f47682990ce7} e: / Windows/system32/config/SYSTEM (HRESULT = 0 x 0) - DriversCallback
DISM driver manager: PID = Search for 1944 for drivers to 'E:\_SMSTaskSequence\Packages\RD100068\02D6A840-36FF-4651-B6A6-92CBE69D08A5 '... (HRESULT = 0 x 0) - DriversCallback
DISM driver manager: PID = 1944 locate the INF files in "E:\_SMSTaskSequence\Packages\RD100068\02D6A840-36FF-4651-B6A6-92CBE69D08A5" (HRESULT = 0 x 0) - DriversCallback
DISM driver manager: PID = 1944 Found lead oz776x64.cat (HRESULT = 0 x 0) - DriversCallback
DISM driver manager: PID = 1944 Found lead oz776x64.inf (HRESULT = 0 x 0) - DriversCallback
DISM driver manager: PID = 1944 Found lead oz776x64.sys (HRESULT = 0 x 0) - DriversCallback
DISM driver manager: PID = 1944 Found lead release.dat (HRESULT = 0 x 0) - DriversCallback
DISM driver manager: PID = 1944 found 1 driver package (s) to "E:\_SMSTaskSequence\Packages\RD100068\02D6A840-36FF-4651-B6A6-92CBE69D08A5". (HRESULT = 0 x 0) - DriversCallback
DISM driver manager: PID = 1944 'E:\_SMSTaskSequence\Packages\RD100068\02D6A840-36FF-4651-B6A6-92CBE69D08A5\oz776x64.inf' driver Package (HRESULT = 0 x 0) - DriversCallback
DISM driver manager: PID = 1944 installation driver 'E:\_SMSTaskSequence\Packages\RD100068\02D6A840-36FF-4651-B6A6-92CBE69D08A5\oz776x64.inf' to the operating system currently offline... (HRESULT = 0 x 0) - DriversCallback
DISM driver manager: PID = 1944 Imported 'E:\_SMSTaskSequence\Packages\RD100068\02D6A840-36FF-4651-B6A6-92CBE69D08A5\oz776x64.inf' to the driver store offline to "E:\Windows\System32\DriverStore\FileRepository\oz776x64.inf_amd64_neutral_0b0c9ec4be8306ad\oz776x64.inf". (HRESULT = 0 x 0) - DriversCallback
DISM driver manager: PID = 1944 installed "E:\_SMSTaskSequence\Packages\RD100068\02D6A840-36FF-4651-B6A6-92CBE69D08A5\oz776x64.inf" driver package! (HRESULT = 0 x 0) - DriversCallback
DISM driver manager: PID = 1944 devices marked with success to reinstall! (HRESULT = 0 x 0) - DriversCallback
DISM driver manager: PID = drivers Installed "1" of 1944. (HRESULT = 0 x 0) - DriversCallback
DISM driver manager: PID = 1944 RETURN InstallDriversOffline (0) (HRESULT = 0 x 0) - DriversCallback
DISM driver manager: PID = 1944, trying to remove [{bf1a281b-ad7b-4476-ac95-f47682990ce7} e: / Windows/system32/config/SOFTWARE\Microsoft\Windows NT\CurrentVersion\UnattendSettings\PnpUnattend] registry key. -CDriverManager::Internal_DoUnattendCleanup
DISM driver manager: PID = 1944 successfully removed [{bf1a281b-ad7b-4476-ac95-f47682990ce7} e: / Windows/system32/config/SOFTWARE\Microsoft\Windows NT\CurrentVersion\UnattendSettings\PnpUnattend] registry key. -CDriverManager::Internal_DoUnattendCleanup
DISM Image Session: PID = 1944 disconnect the suppliers - CDISMImageSession::Final_OnDisconnect store
DISM store provider: PID = 1944 finalize (DISM Package Manager) service provider - CDISMProviderStore::Internal_DisconnectProvider
Unloading hive registry offline: {bf1a281b-ad7b-4476-ac95-f47682990ce7} e: / Windows/System32/config/SOFTWARE
Cannot unload the registry offline: {bf1a281b-ad7b-4476-ac95-f47682990ce7} e: / Windows/System32/config/SOFTWARE, the customer can always need open. [HRESULT = 0 X 80070005 - E_ACCESSDENIED]
Unloading hive registry offline: {bf1a281b-ad7b-4476-ac95-f47682990ce7} e: / Windows/System32/config/SYSTEM
Cannot unload the registry offline: {bf1a281b-ad7b-4476-ac95-f47682990ce7} e: / Windows/System32/config/SYSTEM, the customer can always need open. [HRESULT = 0 X 80070005 - E_ACCESSDENIED]
Unloading hive registry offline: {bf1a281b-ad7b-4476-ac95-f47682990ce7} e: / Windows/System32/config/SECURITY
Cannot unload the registry offline: {bf1a281b-ad7b-4476-ac95-f47682990ce7} e: / Windows/System32/config/SECURITY, the customer can always need open. [HRESULT = 0 X 80070005 - E_ACCESSDENIED]
Unloading hive registry offline: {bf1a281b-ad7b-4476-ac95-f47682990ce7} e: / Windows/System32/config/SAM
Cannot unload the registry offline: {bf1a281b-ad7b-4476-ac95-f47682990ce7} e: / Windows/System32/config/SAM, the customer can always need open. [HRESULT = 0 X 80070005 - E_ACCESSDENIED]
Unloading hive registry offline: {bf1a281b-ad7b-4476-ac95-f47682990ce7} e: / Windows/System32/config/COMPONENTS
Cannot unload the registry offline: {bf1a281b-ad7b-4476-ac95-f47682990ce7} e: / Windows/System32/config/COMPONENTS, the customer can always need open. [HRESULT = 0 X 80070005 - E_ACCESSDENIED]
Unloading hive registry offline: {bf1a281b-ad7b-4476-ac95-f47682990ce7} e: / Windows/System32/config/DEFAULT
Cannot unload the registry offline: {bf1a281b-ad7b-4476-ac95-f47682990ce7} e: / Windows/System32/config/by DEFAULT, the client can always need open. [HRESULT = 0 X 80070005 - E_ACCESSDENIED]
Unloading hive registry offline: {bf1a281b-ad7b-4476-ac95-f47682990ce7}E:/Users/default/ntuser.dat
Cannot unload the registry offline: {bf1a281b-ad7b-4476-ac95-f47682990ce7}E:/Users/default/ntuser.dat, the customer can always need open.} [HRESULT = 0 X 80070005 - E_ACCESSDENIED]
Unloading hive registry offline: {bf1a281b-ad7b-4476-ac95-f47682990ce7}E:/Windows/system32/smi/store/Machine/schema.dat
DISM Package Manager: PID = base CBS finalization of 1944. -CDISMPackageManager::Finalize
DISM store provider: PID = 1944 cutting provider: DISM Package Manager - CDISMProviderStore::Internal_DisconnectProvider
DISM store provider: PID = 1944 found the OSServices. Waiting to finalize until all other providers are unloaded. -CDISMProviderStore::Final_OnDisconnect
DISM store provider: PID = 1944 finalize maintenance provider (MsiManager) - CDISMProviderStore::Internal_DisconnectProvider
DISM store provider: PID = provider sectioning of 1944: MsiManager - CDISMProviderStore::Internal_DisconnectProvider
DISM store provider: PID = 1944 finalize maintenance provider (IntlManager) - CDISMProviderStore::Internal_DisconnectProvider
DISM store provider: PID = provider sectioning of 1944: IntlManager - CDISMProviderStore::Internal_DisconnectProvider
DISM store provider: PID = 1944 found the provider PE. Waiting to finalize until all other providers are unloaded. -CDISMProviderStore::Final_OnDisconnect
DISM store provider: PID = 1944 finalize maintenance provider (DriverManager) - CDISMProviderStore::Internal_DisconnectProvider
DISM store provider: PID = 1944 cutting provider: DriverManager - CDISMProviderStore::Internal_DisconnectProvider
DISM store provider: PID = 1944 finalize (DISM Unattend Manager) service provider - CDISMProviderStore::Internal_DisconnectProvider
DISM store provider: PID = 1944 cutting provider: DISM Unattend Manager - CDISMProviderStore::Internal_DisconnectProvider
DISM store provider: PID = 1944 found the OSServices. Waiting to finalize until all other providers are unloaded. -CDISMProviderStore::Final_OnDisconnect
DISM store provider: PID = 1944 finalize maintenance provider (SmiManager) - CDISMProviderStore::Internal_DisconnectProvider
DISM store provider: PID = provider sectioning of 1944: SmiManager - CDISMProviderStore::Internal_DisconnectProvider
DISM store provider: PID = 1944 finalize (Edition Manager) service provider - CDISMProviderStore::Internal_DisconnectProvider
DISM store provider: PID = 1944 cutting provider: Edition Manager - CDISMProviderStore::Internal_DisconnectProvider
DISM store provider: PID = 1944 freeing the local reference to the OSServices. -CDISMProviderStore::Internal_DisconnectProvider
DISM store provider: PID = provider sectioning of 1944: OSServices - CDISMProviderStore::Internal_DisconnectProvider
DISM operating system provider: PID = 1944 successfully unloaded all registry hives. -CDISMOSServiceManager::Final_OnDisconnect
DISM store provider: PID = 1944 freeing the local reference to the DISMLogger. Stop recording. -CDISMProviderStore::Internal_DisconnectProvider
DISM. EXE: Session of the Image has been closed. Reboot required = no.
DISM. EXE:
DISM. EXE:<----- ending="" dism.exe="" session="" -----="">
DISM. EXE:
DISM store provider: PID = 1624 TID = 1796 found the OSServices. Waiting to finalize until all other providers are unloaded. -CDISMProviderStore::Final_OnDisconnect
DISM store provider: PID = 1624 TID = 1796 sectioning supplier: FolderManager - CDISMProviderStore::Internal_DisconnectProvider
DISM store provider: PID = 1624 TID = 1796 sectioning supplier: WimManager - CDISMProviderStore::Internal_DisconnectProvider
DISM store provider: PID = 1624 TID = 1796 sectioning supplier: VHDManager - CDISMProviderStore::Internal_DisconnectProvider
DISM store provider: PID = 1624 TID = 1796 sectioning supplier: GenericImagingManager - CDISMProviderStore::Internal_DisconnectProvider
DISM store provider: PID = 1624 TID = sectioning provider 1796: Compatibility Manager - CDISMProviderStore::Internal_DisconnectProvider
DISM store provider: PID = 1624 TID = 1796 freeing the local reference to the DISMLogger. Stop recording. -CDISMProviderStore::Internal_DisconnectProvider
PID = 2016 TID = 1564 Scratch directory set to "E:\_SMSTaskSequence\PkgMgrTemp\". -CDISMManager::put_ScratchDir
PID = 2016 TID = 1564 DismCore.dll version: 6.3.9600.16384 - CDISMManager::FinalConstruct
PID = 2016 TID = 1564 correctly loaded the ImageSession to "X:\WINDOWS\System32\Dism" - CDISMManager::LoadLocalImageSession
DISM store provider: PID = 2016 TID = 1564 found and initialized the DISM log. -CDISMProviderStore::Internal_InitializeLogger
DISM store provider: PID = 2016 = 1564 TID failed to obtain and initialize the provider PE. Continue to assume this isn't a WinPE image. -CDISMProviderStore::Final_OnConnect
DISM store provider: PID = 2016 TID = 1564 completed initialization of the provider card. -CDISMProviderStore::Final_OnConnect
DISM store provider: PID = 2016 TID = 1564 get provider DISMLogger - CDISMProviderStore::GetProvider
DISM store provider: PID = 2016 TID = 1564 provider has already been initialized. Returns the existing instance. -CDISMProviderStore::Internal_GetProvider
DISM store provider: PID = 2016 TID = 1564 get provider DISMLogger - CDISMProviderStore::GetProvider
DISM store provider: PID = 2016 TID = 1564 provider has already been initialized. Returns the existing instance. -CDISMProviderStore::Internal_GetProvider
DISM Manager: PID = 2016 TID is 1564 managed to create the session store and supplier of local image. -CDISMManager::CreateLocalImageSession
DISM store provider: PID = 2016 TID = 1564 get provider DISMLogger - CDISMProviderStore::GetProvider
DISM store provider: PID = 2016 TID = 1564 provider has already been initialized. Returns the existing instance. -CDISMProviderStore::Internal_GetProvider
DISM. EXE:
DISM. EXE:<----- starting="" dism.exe="" session="" -----="">
DISM. EXE:
DISM. EXE: Host machine information: OS Version = 6.3.9600, operation architecture = x 86, number of CPUs = 4
DISM. EXE: Version of Dism.exe: 6.3.9600.16384
DISM. "" EXE: run command line: 'X:\WINDOWS\system32\dism.exe' / / image: / "E:" windir: 'WINDOWS' /apply-unattend:"E:\_SMSTaskSequence\PkgMgrTemp\drivers.xml ' /logpath:"E:\_SMSTaskSequence\PkgMgrTemp\dism.log '.
DISM store provider: PID = 2016 TID = 1564 get collection of suppliers with a local provider store type. -CDISMProviderStore::GetProviderCollection
DISM store provider: PID = 2016 TID = 1564 provider has not been met. Attempt to initialize the provider. -CDISMProviderStore::Internal_GetProvider
DISM store provider: PID = 2016 TID = 1564 loading location provider X:\WINDOWS\System32\Dism\FolderProvider.dll - CDISMProviderStore::Internal_GetProvider
DISM store provider: PID = 2016 TID = 1564 connection to the provider located at X:\WINDOWS\System32\Dism\FolderProvider.dll. -CDISMProviderStore::Internal_LoadProvider
DISM store provider: PID = 2016 TID = 1564 provider has not been met. Attempt to initialize the provider. -CDISMProviderStore::Internal_GetProvider
DISM store provider: PID = 2016 TID = 1564 loading location provider X:\WINDOWS\System32\Dism\WimProvider.dll - CDISMProviderStore::Internal_GetProvider
DISM store provider: PID = 2016 TID = 1564 connection to the provider located at X:\WINDOWS\System32\Dism\WimProvider.dll. -CDISMProviderStore::Internal_LoadProvider
DISM store provider: PID = 2016 TID = 1564 provider has not been met. Attempt to initialize the provider. -CDISMProviderStore::Internal_GetProvider
DISM store provider: PID = 2016 TID = 1564 loading location provider X:\WINDOWS\System32\Dism\VHDProvider.dll - CDISMProviderStore::Internal_GetProvider
DISM store provider: PID = 2016 TID = 1564 connection to the provider located at X:\WINDOWS\System32\Dism\VHDProvider.dll. -CDISMProviderStore::Internal_LoadProvider
DISM store provider: PID = 2016 TID = 1564 provider has not been met. Attempt to initialize the provider. -CDISMProviderStore::Internal_GetProvider
DISM store provider: PID = 2016 TID = 1564 loading location provider X:\WINDOWS\System32\Dism\ImagingProvider.dll - CDISMProviderStore::Internal_GetProvider
DISM store provider: PID = 2016 TID = 1564 connection to the provider located at X:\WINDOWS\System32\Dism\ImagingProvider.dll. -CDISMProviderStore::Internal_LoadProvider
DISM store provider: PID = 2016 TID = 1564 provider has not been met. Attempt to initialize the provider. -CDISMProviderStore::Internal_GetProvider
DISM store provider: PID = 2016 TID = 1564 loading location provider X:\WINDOWS\System32\Dism\CompatProvider.dll - CDISMProviderStore::Internal_GetProvider
DISM store provider: PID = 2016 TID = 1564 connection to the provider located at X:\WINDOWS\System32\Dism\CompatProvider.dll. -CDISMProviderStore::Internal_LoadProvider
DISM. EXE: Got the provider collection. Now list to build the control panel.
DISM. EXE: Try to add the provider controls: DISM log provider
DISM. EXE: Attempting to add provider orders: FolderManager
DISM. EXE: Attempting to add provider orders: WimManager
DISM. EXE: Successfully recorded commands to the provider: WimManager.
DISM. EXE: Attempting to add provider orders: VHDManager
DISM. EXE: Attempting to add provider orders: GenericImagingManager
DISM. EXE: Successfully recorded commands to the provider: GenericImagingManager.
DISM. EXE: Try to add the provider controls: Compatibility Manager
DISM. EXE: Successfully recorded orders for the supplier: Compatibility Manager.
DISM store provider: PID = 2016 TID = 1564 get collection of suppliers with a local provider store type. -CDISMProviderStore::GetProviderCollection
[2016] [0 x 80070002] FIOReadFileIntoBuffer: (1415): the system cannot find the specified file.
UnmarshallImageHandleFromDirectory: (511) [2016] [0xc142011c]
WIMGetMountedImageHandle: (2568) [2016] [0xc142011c]
DISM WIM provider: PID = 2016 TID = 1564 [E:\] is not a WIM mount point. -CWimMountedImageInfo::Initialize
DISM VHD provider: PID = 2016 TID = 1564 [E:\] is not recognized by the provider of the DISM VHD. -CVhdImage::Initialize
DISM store provider: PID = 2016 TID = 1564 get provider VHDManager - CDISMProviderStore::GetProvider
DISM store provider: PID = 2016 TID = 1564 provider has already been initialized. Returns the existing instance. -CDISMProviderStore::Internal_GetProvider
DISM VHD provider: PID = 2016 TID = 1564 [E:\] is not recognized by the provider of the DISM VHD. -CVhdImage::Initialize
DISM imagery provider: PID = 2016 TID = 1564 VHDManager provider does not support CreateDismImage on E:\ - CGenericImagingManager::CreateDismImage
DISM store provider: PID = 2016 TID = 1564 get provider WimManager - CDISMProviderStore::GetProvider
DISM store provider: PID = 2016 TID = 1564 provider has already been initialized. Returns the existing instance. -CDISMProviderStore::Internal_GetProvider
[2016] [0 x 80070002] FIOReadFileIntoBuffer: (1415): the system cannot find the specified file.
UnmarshallImageHandleFromDirectory: (511) [2016] [0xc142011c]
WIMGetMountedImageHandle: (2568) [2016] [0xc142011c]
DISM WIM provider: PID = 2016 TID = 1564 [E:\] is not a WIM mount point. -CWimMountedImageInfo::Initialize
DISM imagery provider: PID = 2016 TID = 1564 WimManager provider does not support CreateDismImage on E:\ - CGenericImagingManager::CreateDismImage
DISM imagery provider: PID = 2016 TID = 1564 no provider Imaging CreateDismImage of decision-making support for this path - CGenericImagingManager::CreateDismImage
DISM Manager: PID = 2016 TID = physical path 1564: E:\ - CDISMManager::CreateImageSession
DISM Manager: PID = 2016 TID = 1564 DISM copy of "E:\WINDOWS\SysWOW64\dism" - CDISMManager::CreateImageSessionFromLocation
DismHostLib: Directory of forwarders returned does not exist; do not change your environment dismhost.exe.
DISM Manager: PID = 2016 TID = 1564 successfully loaded the ImageSession to "E:\_SMSTaskSequence\PkgMgrTemp\3B9CD052-2FE5-4736-8E67-24E8E7CED176" - CDISMManager::LoadRemoteImageSession
DISM Image Session: PID is 1608 instantiating the provider store. -CDISMImageSession::get_ProviderStore
DISM store provider: PID = 1608 initialization of a store for the type of session IMAGE provider. -CDISMProviderStore::Final_OnConnect
DISM store provider: PID = 1608 provider has not been met. Attempt to initialize the provider. -CDISMProviderStore::Internal_GetProvider
DISM store provider: PID = 1608 loading location provider E:\_SMSTaskSequence\PkgMgrTemp\3B9CD052-2FE5-4736-8E67-24E8E7CED176\OSProvider.dll - CDISMProviderStore::Internal_GetProvider
DISM store provider: PID = 1608 connection to the provider located at E:\_SMSTaskSequence\PkgMgrTemp\3B9CD052-2FE5-4736-8E67-24E8E7CED176\OSProvider.dll. -CDISMProviderStore::Internal_LoadProvider
DISM operating system provider: PID = 1608 SystemPath failing to E:\ - CDISMOSServiceManager::Final_OnConnect
DISM operating system provider: PID = 1608 cannot copy msxml6.dll in the client's executable file in the dismhost.exe folder. Relying on the boxed version. -CDISMOSServiceManager::RunASICompatibilityShim
DISM operating system provider: PID = default Windows from 1608 to E:\Windows - CDISMOSServiceManager::Final_OnConnect folder
DISM store provider: PID = 1608 attempt to initialize the Session of the Image recorder. -CDISMProviderStore::Final_OnConnect
DISM store provider: PID = 1608 provider has not been met. Attempt to initialize the provider. -CDISMProviderStore::Internal_GetProvider
DISM store provider: PID = 1608 loading location provider E:\_SMSTaskSequence\PkgMgrTemp\3B9CD052-2FE5-4736-8E67-24E8E7CED176\LogProvider.dll - CDISMProviderStore::Internal_GetProvider
DISM store provider: PID = 1608 connection to the provider located at E:\_SMSTaskSequence\PkgMgrTemp\3B9CD052-2FE5-4736-8E67-24E8E7CED176\LogProvider.dll. -CDISMProviderStore::Internal_LoadProvider
DISM store provider: PID = 1608 get provider OSServices - CDISMProviderStore::GetProvider
DISM store provider: PID = 1608 provider has already been initialized. Returns the existing instance. -CDISMProviderStore::Internal_GetProvider
DISM store provider: PID = 1608 found and initialized the DISM log. -CDISMProviderStore::Internal_InitializeLogger
DISM store provider: PID = 1608 provider has not been met. Attempt to initialize the provider. -CDISMProviderStore::Internal_GetProvider
DISM store provider: PID = 1608 loading location provider E:\_SMSTaskSequence\PkgMgrTemp\3B9CD052-2FE5-4736-8E67-24E8E7CED176\PEProvider.dll - CDISMProviderStore::Internal_GetProvider
DISM store provider: PID = 1608, cannot load the provider: E:\_SMSTaskSequence\PkgMgrTemp\3B9CD052-2FE5-4736-8E67-24E8E7CED176\PEProvider.dll. -CDISMProviderStore:Internal_GetProvider(hr:0x8007007e)
DISM store provider: PID = 1608 failed to obtain and initialize the provider PE. Continue to assume this isn't a WinPE image. -CDISMProviderStore::Final_OnConnect
DISM store provider: PID = 1608 completed initialization of the provider card. -CDISMProviderStore::Final_OnConnect
DISM store provider: PID = 1608 get provider DISMLogger - CDISMProviderStore::GetProvider
DISM store provider: PID = 1608 provider has already been initialized. Returns the existing instance. -CDISMProviderStore::Internal_GetProvider
DISM Manager: PID = 2016 TID = 1564 Image session correctly charged to the temporary location: E:\_SMSTaskSequence\PkgMgrTemp\3B9CD052-2FE5-4736-8E67-24E8E7CED176 - CDISMManager::CreateImageSession
DISM store provider: PID = 1608 get provider OSServices - CDISMProviderStore::GetProvider
DISM store provider: PID = 1608 provider has already been initialized. Returns the existing instance. -CDISMProviderStore::Internal_GetProvider
DISM operating system provider: PID = 1608 setting to E:\ - CDISMOSServiceManager::SetSystemPath SystemPath
00000001 considered shim [l:252 {126}] '------? \E:\Windows\Servicing\x86_microsoft-Windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_0b0e4b4025cf4049\pkgmgr.exe': had STATUS_OBJECT_PATH_NOT_FOUND
Shim 00000002 considered [l:246 {123}] '------? \E:\Windows\WinSxS\x86_microsoft-Windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_0b0e4b4025cf4049\pkgmgr.exe': had STATUS_SUCCESS
DISM. EXE: Target image information: Version = 6.1.7601.17592 OS, architecture of the Image = amd64
DISM store provider: PID = 1608 get the provider to a provider of image collection type store. -CDISMProviderStore::GetProviderCollection
DISM store provider: PID = 1608 provider has not been met. Attempt to initialize the provider. -CDISMProviderStore::Internal_GetProvider
DISM store provider: PID = 1608 loading location provider E:\_SMSTaskSequence\PkgMgrTemp\3B9CD052-2FE5-4736-8E67-24E8E7CED176\CbsProvider.dll - CDISMProviderStore::Internal_GetProvider
DISM store provider: PID = 1608 connection to the provider located at E:\_SMSTaskSequence\PkgMgrTemp\3B9CD052-2FE5-4736-8E67-24E8E7CED176\CbsProvider.dll. -CDISMProviderStore::Internal_LoadProvider
DISM store provider: PID = 1608 met a service provider, execute additional initialization of maintenance. -CDISMProviderStore::Internal_LoadProvider
00000001 considered shim [l:252 {126}] '------? \E:\Windows\Servicing\x86_microsoft-Windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_0b0e4b4025cf4049\pkgmgr.exe': had STATUS_OBJECT_PATH_NOT_FOUND
Shim 00000002 considered [l:246 {123}] '------? \E:\Windows\WinSxS\x86_microsoft-Windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_0b0e4b4025cf4049\pkgmgr.exe': had STATUS_SUCCESS
DISM Package Manager: PID = 1608 completed initialization of the CbsConUI Manager. -CCbsConUIHandler::Initialize
00000001 considered shim [l:252 {126}] '------? \E:\Windows\Servicing\x86_microsoft-Windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_0b0e4b4025cf4049\pkgmgr.exe': had STATUS_OBJECT_PATH_NOT_FOUND
Shim 00000002 considered [l:246 {123}] '------? \E:\Windows\WinSxS\x86_microsoft-Windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_0b0e4b4025cf4049\pkgmgr.exe': had STATUS_SUCCESS
Transactions disabled in the registry, continuing without transaction support.
The core transactions are disabled, continuing without transaction support.
Cannot find a matching version for the servicing stack: E:\Windows\WinSxS\x86_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_0b0e4b4025cf4049\ [HRESULT = 0 x 80070490 - ERROR_NOT_FOUND]
Cannot find the directory stack service in the online store. [HRESULT = 0 X 80070490 - ERROR_NOT_FOUND]
To do in offline mode, the refuelling by using the version of the stack of: E:\Windows\WinSxS\x86_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_0b0e4b4025cf4049\cbscore.dll
Load v6.1.7601.17592 Servicing Stack with Core: E:\Windows\WinSxS\x86_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_0b0e4b4025cf4049\cbscore.dll
00000001@2014/2/12:00:13:40.733 WcpInitialize (version 0.0.0.6 wcp.dll) called (battery @0x713ede79 @0x71625d7d @0x7160205a @0x716d94f2 @0x716d96b9 @0x716b8e39)
Could not load SrClient DLL path: C:\windows\system32\srclient.dll. Continue without the system restore points.
00000002@2014/2/12:00:13:40.733 WcpInitialize (version 0.0.0.6 wcp.dll) called (battery @0x713ede79 @0 x 71667183 @0 x 71664013 @0x716d94f2 @0x716d96b9 @0x716b8e39)
DISM Package Manager: PID = 1608 Loaded battery for offline use only maintenance. -CDISMPackageManager::RefreshInstanceAndLock
Loading offline registry hive: SOFTWARE in the registry key ' {bf1a281b-ad7b-4476-ac95-f47682990ce7} e: / Windows/System32/config/SOFTWARE ' the path '\\?\E:\Windows\System32\config\SOFTWARE '.
Loading offline registry hive: SYSTEM, in the registry key ' {bf1a281b-ad7b-4476-ac95-f47682990ce7} e: / Windows/System32/config/SYSTEM "path"\\?\E:\Windows\System32\config\SYSTEM ".
Loading offline registry hive: security key in the registry "{bf1a281b-ad7b-4476-ac95-f47682990ce7} e: / Windows/System32/config/SECURITY ' the path '\\?\E:\Windows\System32\config\SECURITY '.
Loading offline registry hive: SAM, in the registry key ' {bf1a281b-ad7b-4476-ac95-f47682990ce7} e: / Windows/System32/config/SAM ' the path '\\?\E:\Windows\System32\config\SAM '.
Loading offline registry hive: COMPONENTS in the registry key ' {bf1a281b-ad7b-4476-ac95-f47682990ce7} e: / Windows/System32/config/COMPONENTS "of the path '\\?\E:\Windows\System32\config\COMPONENTS '.
Loading offline registry hive: by DEFAULT, the registry key ' {bf1a281b-ad7b-4476-ac95-f47682990ce7} e: / Windows/System32/config/DEFAULT ' the path '\\?\E:\Windows\System32\config\DEFAULT '.
Failed to open the registry root: n/a, key: Microsoft\Windows NT\CurrentVersion\ProfileList. [HRESULT = 0 X 80070002 - ERROR_FILE_NOT_FOUND]
Cannot query for path in the user profiles directory. [HRESULT = 0 X 80070002 - ERROR_FILE_NOT_FOUND]
Could not load the default user profile registry hive. [HRESULT = 0 X 80070002 - ERROR_FILE_NOT_FOUND]
Unloading hive registry offline: {bf1a281b-ad7b-4476-ac95-f47682990ce7} e: / Windows/System32/config/SOFTWARE
Cannot unload the registry offline: {bf1a281b-ad7b-4476-ac95-f47682990ce7} e: / Windows/System32/config/SOFTWARE, the customer can always need open. [HRESULT = 0 X 80070005 - E_ACCESSDENIED]
Unloading hive registry offline: {bf1a281b-ad7b-4476-ac95-f47682990ce7} e: / Windows/System32/config/SYSTEM
Cannot unload the registry offline: {bf1a281b-ad7b-4476-ac95-f47682990ce7} e: / Windows/System32/config/SYSTEM, the customer can always need open. [HRESULT = 0 X 80070005 - E_ACCESSDENIED]
Unloading hive registry offline: {bf1a281b-ad7b-4476-ac95-f47682990ce7} e: / Windows/System32/config/SECURITY
Cannot unload the registry offline: {bf1a281b-ad7b-4476-ac95-f47682990ce7} e: / Windows/System32/config/SECURITY, the customer can always need open. [HRESULT = 0 X 80070005 - E_ACCESSDENIED]
Unloading hive registry offline: {bf1a281b-ad7b-4476-ac95-f47682990ce7} e: / Windows/System32/config/SAM
Cannot unload the registry offline: {bf1a281b-ad7b-4476-ac95-f47682990ce7} e: / Windows/System32/config/SAM, the customer can always need open. [HRESULT = 0 X 80070005 - E_ACCESSDENIED]
Unloading hive registry offline: {bf1a281b-ad7b-4476-ac95-f47682990ce7} e: / Windows/System32/config/COMPONENTS
Cannot unload the registry offline: {bf1a281b-ad7b-4476-ac95-f47682990ce7} e: / Windows/System32/config/COMPONENTS, the customer can always need open. [HRESULT = 0 X 80070005 - E_ACCESSDENIED]
Unloading hive registry offline: {bf1a281b-ad7b-4476-ac95-f47682990ce7} e: / Windows/System32/config/DEFAULT
Cannot unload the registry offline: {bf1a281b-ad7b-4476-ac95-f47682990ce7} e: / Windows/System32/config/by DEFAULT, the client can always need open. [HRESULT = 0 X 80070005 - E_ACCESSDENIED]
Unable to load the store currently out of the startup directory: directory '\\?\E:\ '. "and windows: '\\?\E:\Windows\' [HRESULT = 0 x 80070002 - ERROR_FILE_NOT_FOUND]
Failed to initialize the store with the boot drive settings: E:\ and windows directory: E:\Windows [HRESULT = 0 x 80070002 - ERROR_FILE_NOT_FOUND]
DISM Package Manager: PID = 1608 failure initializing the session - CDISMPackageManager::RefreshInstanceAndLock (hr:0 x 80070002)
DISM Package Manager: PID = 1608 making internal initialization - CDISMPackageManager::Initialize(hr:0x80070002) ├echec
DISM store provider: PID = 1608, cannot call the method Initialize on IDismServicingProvider Interface - CDISMProviderStore::Internal_LoadProvider (hr:0 x 80070002)
DISM store provider: PID = 1608, cannot load the provider: E:\_SMSTaskSequence\PkgMgrTemp\3B9CD052-2FE5-4736-8E67-24E8E7CED176\CbsProvider.dll. -CDISMProviderStore:Internal_GetProvider(hr:0x80070002)
DISM store provider: PID = 1608 provider has not been met. Attempt to initialize the provider. -CDISMProviderStore::Internal_GetProvider
DISM store provider: PID = 1608 loading location provider E:\_SMSTaskSequence\PkgMgrTemp\3B9CD052-2FE5-4736-8E67-24E8E7CED176\MsiProvider.dll - CDISMProviderStore::Internal_GetProvider
DISM store provider: PID = 1608 connection to the provider located at E:\_SMSTaskSequence\PkgMgrTemp\3B9CD052-2FE5-4736-8E67-24E8E7CED176\MsiProvider.dll. -CDISMProviderStore::Internal_LoadProvider
DISM store provider: PID = 1608 met a service provider, execute additional initialization of maintenance. -CDISMProviderStore::Internal_LoadProvider
DISM store provider: PID = 1608 provider has not been met. Attempt to initialize the provider. -CDISMProviderStore::Internal_GetProvider
DISM store provider: PID = 1608 loading location provider E:\_SMSTaskSequence\PkgMgrTemp\3B9CD052-2FE5-4736-8E67-24E8E7CED176\IntlProvider.dll - CDISMProviderStore::Internal_GetProvider
DISM store provider: PID = 1608 connection to the provider located at E:\_SMSTaskSequence\PkgMgrTemp\3B9CD052-2FE5-4736-8E67-24E8E7CED176\IntlProvider.dll. -CDISMProviderStore::Internal_LoadProvider
DISM store provider: PID = 1608 met a service provider, execute additional initialization of maintenance. -CDISMProviderStore::Internal_LoadProvider
DISM store provider: PID = 1608 provider has not been met. Attempt to initialize the provider. -CDISMProviderStore::Internal_GetProvider
DISM store provider: PID = 1608 loading location provider E:\_SMSTaskSequence\PkgMgrTemp\3B9CD052-2FE5-4736-8E67-24E8E7CED176\DmiProvider.dll - CDISMProviderStore::Internal_GetProvider
DISM store provider: PID = 1608 connection to the provider located at E:\_SMSTaskSequence\PkgMgrTemp\3B9CD052-2FE5-4736-8E67-24E8E7CED176\DmiProvider.dll. -CDISMProviderStore::Internal_LoadProvider
DISM store provider: PID = 1608 met a service provider, execute additional initialization of maintenance. -CDISMProviderStore::Internal_LoadProvider
00000001 considered shim [l:252 {126}] '------? \E:\Windows\Servicing\x86_microsoft-Windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_0b0e4b4025cf4049\pkgmgr.exe': had STATUS_OBJECT_PATH_NOT_FOUND
Shim 00000002 considered [l:246 {123}] '------? \E:\Windows\WinSxS\x86_microsoft-Windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_0b0e4b4025cf4049\pkgmgr.exe': had STATUS_SUCCESS
DISM operating system provider: PID = 1608 get the path of registry to the SOFTWARE hive located in E:\Windows\system32\config\SOFTWARE and determine if it is loaded. -CDISMOSServiceManager::DetermineBootDrive
DISM operating system provider: PID = 1608 could not open the Microsoft\Windows NT\CurrentVersion key. -CDISMOSServiceManager:DetermineBootDrive(hr:0x80070002)
DISM driver manager: PID = ├echec 1608 to get the boot from the operating system services provider drive. -CDriverManager:Initialize(hr:0x80070002)
DISM store provider: PID = 1608, cannot call the method Initialize on IDismServicingProvider Interface - CDISMProviderStore::Internal_LoadProvider (hr:0 x 80070002)
DISM store provider: PID = 1608, cannot load the provider: E:\_SMSTaskSequence\PkgMgrTemp\3B9CD052-2FE5-4736-8E67-24E8E7CED176\DmiProvider.dll. -CDISMProviderStore:Internal_GetProvider(hr:0x80070002)
DISM store provider: PID = 1608 provider has not been met. Attempt to initialize the provider. -CDISMProviderStore::Internal_GetProvider
DISM store provider: PID = 1608 loading location provider E:\_SMSTaskSequence\PkgMgrTemp\3B9CD052-2FE5-4736-8E67-24E8E7CED176\UnattendProvider.dll - CDISMProviderStore::Internal_GetProvider
DISM store provider: PID = 1608 connection to the provider located at E:\_SMSTaskSequence\PkgMgrTemp\3B9CD052-2FE5-4736-8E67-24E8E7CED176\UnattendProvider.dll. -CDISMProviderStore::Internal_LoadProvider
DISM store provider: PID = 1608 met a service provider, execute additional initialization of maintenance. -CDISMProviderStore::Internal_LoadProvider
DISM store provider: PID = 1608 provider has not been met. Attempt to initialize the provider. -CDISMProviderStore::Internal_GetProvider
DISM store provider: PID = 1608 loading location provider E:\_SMSTaskSequence\PkgMgrTemp\3B9CD052-2FE5-4736-8E67-24E8E7CED176\SmiProvider.dll - CDISMProviderStore::Internal_GetProvider
DISM store provider: PID = 1608 connection to the provider located at E:\_SMSTaskSequence\PkgMgrTemp\3B9CD052-2FE5-4736-8E67-24E8E7CED176\SmiProvider.dll. -CDISMProviderStore::Internal_LoadProvider
DISM store provider: PID = 1608 met a service provider, execute additional initialization of maintenance. -CDISMProviderStore::Internal_LoadProvider
DISM store provider: PID = 1608 provider has not been met. Attempt to initialize the provider. -CDISMProviderStore::Internal_GetProvider
DISM store provider: PID = 1608 loading location provider E:\_SMSTaskSequence\PkgMgrTemp\3B9CD052-2FE5-4736-8E67-24E8E7CED176\TransmogProvider.dll - CDISMProviderStore::Internal_GetProvider
DISM store provider: PID = 1608 connection to the provider located at E:\_SMSTaskSequence\PkgMgrTemp\3B9CD052-2FE5-4736-8E67-24E8E7CED176\TransmogProvider.dll. -CDISMProviderStore::Internal_LoadProvider
DISM store provider: PID = 1608 met a service provider, execute additional initialization of maintenance. -CDISMProviderStore::Internal_LoadProvider
DISM store provider: PID = 1608 get provider DISM Package Manager - CDISMProviderStore::GetProvider
DISM store provider: PID = 1608 provider has already been initialized. Returns the existing instance. -CDISMProviderStore::Internal_GetProvider
DISM store provider: PID = 1608, impossible to retrieve the Instance of the provider. -CDISMProviderStore:Internal_GetProvider(hr:0x80004005)
DISM store provider: PID = 1608, cannot call the Initialize on IDismServicingProvider Interface - CDISMProviderStore::Internal_LoadProvider (hr:0 x 80004005) method
DISM store provider: PID = 1608, cannot load the provider: E:\_SMSTaskSequence\PkgMgrTemp\3B9CD052-2FE5-4736-8E67-24E8E7CED176\TransmogProvider.dll. -CDISMProviderStore:Internal_GetProvider(hr:0x80004005)
DISM. EXE: Got the provider collection. Now list to build the control panel.
DISM. EXE: Attempting to add provider orders: OSServices
DISM. EXE: Attempting to add provider orders: MsiManager
DISM. EXE: Successfully recorded commands to the provider: MsiManager.
DISM. EXE: Attempting to add provider orders: IntlManager
DISM. EXE: Successfully recorded commands to the provider: IntlManager.
DISM. EXE: Try to add the provider controls: DISM Unattend Manager
DISM. EXE: Successfully recorded orders for the supplier: DISM Unattend Manager.
DISM. EXE: Try to add the provider controls: DISM log provider
DISM. EXE: Attempting to add provider orders: SmiManager
DISM store provider: PID = 1608 get provider DISM Unattend Manager - CDISMProviderStore::GetProvider
DISM store provider: PID = 1608 provider has already been initialized. Returns the existing instance. -CDISMProviderStore::Internal_GetProvider
DISM store provider: PID = 1608 get provider DISM Package Manager - CDISMProviderStore::GetProvider
DISM store provider: PID = 1608 provider has already been initialized. Returns the existing instance. -CDISMProviderStore::Internal_GetProvider
DISM store provider: PID = 1608, impossible to retrieve the Instance of the provider. -CDISMProviderStore:Internal_GetProvider(hr:0x80004005)
DISM unattended setup handler: PID = 1608 d:\w7rtm\base\ntsetup\opktools\dism\providers\unattendprovider\dll\unattendmanager.cpp:390 - CUnattendManager::Apply (hr:0 x 80004005)
DISM unattended setup handler: PID = 1608 d:\w7rtm\base\ntsetup\opktools\dism\providers\unattendprovider\dll\unattendmanager.cpp:654 - CUnattendManager::InternalExecuteCmdLine (hr:0 x 80004005)
DISM unattended setup handler: PID = 1608 d:\w7rtm\base\ntsetup\opktools\dism\providers\unattendprovider\dll\unattendmanager.cpp:603 - CUnattendManager::ExecuteCmdLine (hr:0 x 80004005)
DISM. EXE: DISM Manager Unattend dealt with at the command line, but failed. HRESULT = 80004005
DISM Image Session: PID = 1608 disconnect the suppliers - CDISMImageSession::Final_OnDisconnect store
DISM store provider: PID = 1608 found the OSServices. Waiting to finalize until all other providers are unloaded. -CDISMProviderStore::Final_OnDisconnect
DISM store provider: PID = 1608 finalize maintenance provider (MsiManager) - CDISMProviderStore::Internal_DisconnectProvider
DISM store provider: PID = 1608 sectioning supplier: MsiManager - CDISMProviderStore::Internal_DisconnectProvider
DISM store provider: PID = 1608 finalize maintenance provider (IntlManager) - CDISMProviderStore::Internal_DisconnectProvider
DISM store provider: PID = 1608 sectioning supplier: IntlManager - CDISMProviderStore::Internal_DisconnectProvider
DISM store provider: PID = 1608 found the provider PE. Waiting to finalize until all other providers are unloaded. -CDISMProviderStore::Final_OnDisconnect
DISM store provider: PID = 1608 finalize (DISM Unattend Manager) service provider - CDISMProviderStore::Internal_DisconnectProvider
DISM store provider: PID = sectioning vendor 1608: DISM Unattend Manager - CDISMProviderStore::Internal_DisconnectProvider
DISM store provider: PID = 1608 found the OSServices. Waiting to finalize until all other providers are unloaded. -CDISMProviderStore::Final_OnDisconnect
DISM store provider: PID = 1608 finalize maintenance provider (SmiManager) - CDISMProviderStore::Internal_DisconnectProvider
DISM store provider: PID = 1608 sectioning supplier: SmiManager - CDISMProviderStore::Internal_DisconnectProvider
DISM store provider: PID = 1608, freeing the local reference to the OSServices. -CDISMProviderStore::Internal_DisconnectProvider
DISM store provider: PID = 1608 sectioning supplier: OSServices - CDISMProviderStore::Internal_DisconnectProvider
DISM operating system provider: PID = 1608 successfully unloaded all registry hives. -CDISMOSServiceManager::Final_OnDisconnect
DISM store provider: PID = 1608, freeing the local reference to the DISMLogger. Stop recording. -CDISMProviderStore::Internal_DisconnectProvider
DISM. EXE: Session of the Image has been closed. Reboot required = no.
DISM. EXE:
DISM. EXE:<----- ending="" dism.exe="" session="" -----="">
DISM. EXE:
DISM store provider: PID = 2016 TID = 1564 found the OSServices. Waiting to finalize until all other providers are unloaded. -CDISMProviderStore::Final_OnDisconnect
DISM store provider: PID = 2016 TID = 1564 provider sectioning: FolderManager - CDISMProviderStore::Internal_DisconnectProvider
DISM store provider: PID = 2016 TID = 1564 provider sectioning: WimManager - CDISMProviderStore::Internal_DisconnectProvider
DISM store provider: PID = 2016 TID = 1564 provider sectioning: VHDManager - CDISMProviderStore::Internal_DisconnectProvider
DISM store provider: PID = 2016 TID = 1564 provider sectioning: GenericImagingManager - CDISMProviderStore::Internal_DisconnectProvider
DISM store provider: PID = 2016 TID = 1564 provider sectioning: Compatibility Manager - CDISMProviderStore::Internal_DisconnectProvider
DISM store provider: PID = 2016 TID = 1564 freeing the local reference to the DISMLogger. Stop recording. -CDISMProviderStore::Internal_DisconnectProvider

If information is needed, please let me know.

Thank you!

Not sure what was broken, but I built another image captured with MDT 2013 and details began to Imaging without problem.

The differences between the captured images were:
- inscription on the installation of JRE 32 bit
- change in the licensing model on the installation of Office (from MAK to KMS)
- software updates since last build - which would have been patches of January and February.
Still, I don't think that the differences above would have corrected the problem - but nevertheless, I'm now building systems of precision without problem.

SCCM OSD deployment with the latitude of Chipset - 7010 Optiplex, Intel 825xx 6430 6510

Hi all

I'm having a major issues producing working builds of Windows xp through SCCM2007 with any device using the Intel 825xx series network cards.The images boot into win PE fine and deploy the reference image then when it reboots and windows starts it does not pick up a working network card. I know they are the right drivers in the cab file as manually installing them from the cab works fine but it just doesnt pick it up when windows starts.

I've tried mounting the wim file used and dropping the inf, sys and dll's into windows and using DISM to import them into the pxe wim but nothing is any different.I have the same problems with the Latitude E6430, 6510 and now the Optiplex 7010 because they all use the same chipset, any ideas or has anyone got a working driver set/task sequence that could assist?

I know that this post is 4 years old, but I eventually find a solution concerning setting Kernel Mode drivers that were causing issues they need to be updated. I posted something similar on server outages, and this seemed to get mine working properly!

ServerFault.com/.../656685

App works not when you deploy with 0.9.4

Hi guys. I had created originally from my application using the 0.9.3 sdk and had no problems. I submitted my app and it was approved, but now I'm trying to re - submit with 0.9.4 and I even can't deploy on the Simulator. I get this error message:

Deployment failed: send request to launch...
Info: Action: launch
Info: Launch of PocketPhotoOrg.debug.testaG90b09yZy5kZWJ1ZyAgICA...
result::failed
Info: done

Also, I get this error message when I run it on the desktop:

VerifyError: Error #1014: class qnx.pps:PSChannel could not be found.

to test2 / ___test2_MobileApplication1_creationComplete () [/ users/AP_Photography/Documents/Adobe Flash Builder Burrito Preview/test2/src/test2.mxml:6]
at flash.events::EventDispatcher/dispatchEventFunction()
at flash.events::EventDispatcher/dispatchEvent()
at mx.core::UIComponent/dispatchEvent() [E:\dev\hero_private_beta\frameworks\projects\framework\src\mx\core\UIComponent.as:12977]
to mx.core::UIComponent / set initialized() [E:\dev\hero_private_beta\frameworks\projects\framework\src\mx\core\UIComponent.as:1757]
at mx.managers::LayoutManager/doPhasedInstantiation() [E:\dev\hero_private_beta\frameworks\projects\framework\src\mx\managers\LayoutManager.as:819]
at mx.managers::LayoutManager/doPhasedInstantiationCallback() [E:\dev\hero_private_beta\frameworks\projects\framework\src\mx\managers\LayoutManager.as:1157]

Could someone tell me why this is happening? I already had 3 approved applications. It's the first time I met this problem and all my other apps went well with 0.9.4 signature and all.

Try to uninstall previous app and install from scratch. If you try to deploy your signed application which you did with 0.9.3 to 0.9.4 sim does launch?

Why isn't KSOAP2 deploy with my project?

I am building an application with the file ksoap2-j2me-core-prev - 2.1.2.jar added to the project to connect to web services.

I created a folder "lib", pasted into the folder lib, then right click (Eclipse) and added to build the access road.

References (imports) works when I'm coding the app, but when I deploy on Simulator or a phone, I get a "ksoap2-j2me-core-prev - 2.1.2.jar not found" error message.

I read texts of presentation on the creation of new library projects, etc. and adding to it, and then create a reference to this library, but who does not copy on the phone either.

Thank you.

In eclipse:

1. go to the Blackberry project properties

2 Java build Path

3. order and export check Ksoap.

PS: Sorry for my English.

Beta4 - can't deploy with QDE more?

I can't deploy applications using the IDE (beta4) more, an error message appears:

Failure of deployment: Info: request shipment: install and launch
Info: Action: install and launch
News: Native debugging: on
Info: File size: 20548379
Info: Installation of XXXXXXXXXXXXXXXXX
Info: Treatment 20548379 bytes
actual_dname:
actual_id:
actual_version:
result::failure 500/pps/system/navigator/control: browser service has not

someone has an idea what I am doing wrong?

I confirm that the issue was with the ghost of an application of the operating system version (Ghost = cannot be consulted/uninstalled)

a security wipe did the trick

New deployment with the ASA and AIP - SSM module

Hi guys and girls,

I think to deploy an ASA with IPS module AIP - SSM to my perimeter. I'm going to use / * Style Definitions * / table. MsoNormalTable {mso-style-name : « Table Normal » ; mso-tstyle-rowband-taille : 0 ; mso-tstyle-colband-taille : 0 ; mso-style-noshow:yes ; mso-style-priorité : 99 ; mso-style-qformat:yes ; mso-style-parent : » « ;" mso-rembourrage-alt : 0 à 5.4pt 0 à 5.4pt ; mso-para-margin : 0 ; mso-para-marge-bottom : .0001pt ; mso-pagination : widow-orphelin ; police-taille : 11.0pt ; famille de police : « Calibri », « sans-serif » ; mso-ascii-font-family : Calibri ; mso-ascii-theme-font : minor-latin ; mso-fareast-font-family : « Times New Roman » ; mso-fareast-theme-font : minor-fareast ; mso-hansi-font-family : Calibri ; mso-hansi-theme-font : minor-latin ; mso-bidi-font-family : « Times New Roman » ; mso-bidi-theme-font : minor-bidi ;} Cisco IPS Manager Express (IME) to monitor the IP addresses to monitor the ASA. I have no plans on deploying a device IDS.

Question: The IME is designed to send notices to the subject of threats? What are some of the configurations in your network? (Just prick with the last question.)

THX...

IME is designed only for IPS monitor (whether it be IPS appliance, module AIP - SSM on ASA or other module IPS). IME is not able on the control of ASA.

EMI can provide advice by email about events which are fires on the IPS, while the IPS itself cannot. EMI may also keep all the events triggered by the IPS, while SPI buffer is small enough, that so if you have huge demonstrations, the buffer gets replaced pretty quickly.

Here is more information about IME, if you are interested:

http://www.Cisco.com/en/us/products/ps9610/index.html

Dance of the Rotoscoping in After Effects with motion tracking?

Hello!
How can I copy the movements of real popular dance to a video into a cartoon character using rotoscoping/masking/motion tracking in AE?
Example:
Neytiri dance rotoscoping/animation at the beginning still very rough - YouTube
Tracking and Rotoscoping in After Effects: dance-2014 Jayant Sharma - YouTube
Thanks in advance!

in the Express.ypH you have provided there is 2 things and none of them is the cartoon character who is drawn on a video:
- * the first is a 3D CGI that mimics the movements of dances from the dancing and I think that this has been done from observation. certainly NOT the Rotoscoping.
- * the second example is a dancing man - a video cutting cutting - perhaps he was dancing in front of a greenscreen, we do not know but is not a caricature but a cutting of a video which has been applied some effects to make it more graphic but still, it's a video and I think that one who was cut by using matte procedure (picture effect) after the dancer was shot in front of a green screen. the face attached to the dancer is a follow-up on the face and securing its position and rotation of the information from tracking data so it will match. This is called the track or the movement of the game and it is a skill that requires time and patience to learn. but it is sometimes easier than rotoscoping. the two can be combined together to make life easier for the ROTO. but it's advanced things.
On rotoscoping as an Art to cut out an Image of a video (not picture on it):

There are several ways to make rotoscoping (cutting of the motion picture), and they all need a lot of practice and patience. There is no way to do it easily and it is a skill that takes time to penetrate. different types of techniques are described here: https://www.fxguide.com/featured/the-art-of-roto-2011/

draw on top of a video (without cutting) is animated rotoscoping and can be done in Photoshop. some do it with "Chronology of Animation Frame" and others with "timeline of the video.

The main workflow is the following:

1. you import your video in photoshop

2. create a timeline of this video

3. do frame-by-frame on top of the video

4. export the sequence as a new video

more on the process of these Roto technical animation can be found in this post.

Re: rotoscoping techniques: Animation video vs Timeline -there are links and information in the post of different examples. the post is a work in the making. I tried to treat it as an article, but new to the Forum (in terms of contributing content) carried out, once a user posts a comment on my comment - I can't access (which makes sense)

Deployment with VMware View streaming

Hi guys,.
I have a Thinapp application I restricted to a group of users. I have it assigned to a pool with the type of installation as "Streaming".
The application is deployed, even for users that are not allowed, but when an unauthorized user clicked received a message saying "Permission denied" what is normal.
So here are my questions:
-Is the application deployed only when the user opens a session on the desktop? Or is she deployed just after it has been assigned to a pool or an office? At first glance, it seems that the application is deployed only when a user opens a session.
-Why the application is deployed to even for unauthorized users? Is seen to deploy thinapps with the default /keepunauthorized setting? Or is it because the deployment runs on computers and users, no? If that normal behavior, it sucks. I'll have to use thinreg that represents a considerable burden in my VDI environment (well, that I can still install the thinapp SDK in the statue of gold...).
Thanks for your answers,
tllp

View Agent queries View manager and get new rights ThinApp. Not sure on the default plan though... If the ThinApps are delivered not only when connecting.

From the View Manager is supported only by payments of pool or office is wide right machine. He cares about the privileges of the user. Since the display manager and he enjoys a support of ThinApp is treated with view team I would ask you to direct any comments to view community.

Most of the clients by using view large scale use ThinApp SDK or thinreg.exe. Reason is true based right user...

deployment with motion

Similar Questions

Maybe you are looking for