Description and title of the application do not take effect in location

Similar Questions

• Editing audio first in Audition, when the marquee tool, the changes do not take effect or I would like to export.

  Editing audio first in Audition, when you use the marquee tool to get rid of unwanted 'knocking' noise audio, the changes do not take effect or I would export after changes in the spectral display.

  No indication on how to save the changes to the marquee selection tool would be great.

  Hmm.  You did something for the audio in the selection?  It looks not to the file has been modified at all, and the registration option is not enabled, unless a change has occurred.  I suppose you try to remove or reduce the volume of the sound inside the selection rectangle, is that correct?  With this selection, you can press DELETE to remove it completely, or set the volume floating just above the selection of lower button.

  It also seems that you stopped reading, and while that save the selection under will be activated pause, of many other commands will not.

  So, try in the following order:

  1 stop playback.  Is File > Save now activated?

  2. otherwise, do some edit to this file.  You will know that the file is considered 'dirty' when an asterisk * appears next to the name of the file in the files Panel and the top of the editor Panel.

  3. There is no number 3.  I feel confident, one of the first two options will work.  Once the file is saved and overwritten, go back to the first and you should hear the content updated the.

• Try reinstalling firefox on a windows machine 7 and I get «the application could not start correctly (0xc0000142)»

  To solve a different problem, I uninstalled Firefox. After you have solved the other issue I'm tying to re - install Firefox and get an error message that says that "the application could not start correctly (0xc0000142). Click OK to close the application. "The title bar of the window, said"setup - stub.exe - Application error. "My PC is a Dell Studio 19 all-in-one running Windows 7 Home Premium.

  I ended up solving this problem by doing a reinstall on Windows 7 site. It took a little while but fixed this and a few other issues I've had.

• Values of the vendor and Version of the application does not

  I'm new to the BlackBerry development and work with the example of BlackBerry Web icon sample (to launch a Web site in the browser) and almost everything works correctly.

  Using the BlacBerry JDE 4.7.0.41, I created my project/application.  I tried to put the project General properties (title, description, version, vendor name).  Loading the app for BB, the title is displayed correctly, but the version shows 0.0.

  In reviewing the .jad file, it seems that the version fields and the seller are not defined on the values that I've specified on the general tab of the properties of the project (see below).

  MIDlet-Version: 0.0
  MIDlet-name: Test title
  MIDlet-Description: Test Description

  MIDlet-vendor:

  I must be missing something pretty basic, so I hope someone can point out what I have to do.

  As a solution, I thought to just modify the .jad file, but did not know if this might cause other issues.

  Thoughts/information?

  If you have already compiled the file once before defining general properties, then you need to remove the jad, so it can be recreated or editing it by hand.

• Hi, I installed Lightroom and Photoshop, but the application does not launch when I try to start it. It shows 'OPEN' in the desktop menu. It doesn't show anything (busy for a few seconds) if I try to run it from the windows menu. Is there something else t

  That's what I see (blelow), but it shows on busy for a few seconds and no application is started:

  

  Hi bennievivier,

  • Not really necessary, can you please check your task manager, if somehow PS running in the background, also please try to put an end to all the process Adobe running in the background and then open PS and LR both and see if they launch.
  • Also, be sure that your Windows operating system is up-to-date.
  • If it still doesn't work then please try provide full permissions on all folders of adobe.

  Concerning

  Rohit

• Dialog box appears and says that the application is not installed for this user, and rerun Setup.

  I checked the properties of Microsoft Office 7 Ultimate and it seems to me that the single play button is enabled. My permissions of the user are writing & and I'm supposed to have administrator rights.
  I don't know if I should try to reinstall or what.  I'm typing this on my XP Pro with Windows 2003 machine, which is networked with my other computer where Office 7 Ultimate does not work, even if it was this morning.  Updates from Microsoft and I was online with Office Online right before you have the problem.
  I just want to know if anyone has had this problem.
  Thank you.

  Hello

  Try a system restore:

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
  ---------------------------------------------

  You can also check with the experts of the Office here:

  MS Office discussion groups
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx
  And here:

  Office newsgroups
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.Setup&cat=en_us_642d5640-c1ba-43C3-A224-b3ec1473346c&lang=en&CR=us

  I hope this helps. Rob - bicycle - Mark Twain said it is good.

• When I start my PC, and before you start I receive this message from InfoCenter.exe - Application error - the application is not initialate properly (0xc0000135).

  Original title: initialize 0xc0000135

  When I start my PC, and before you start I receive this message from InfoCenter.exe - Application error - the application is not initialate properly (0xc0000135). I just click OK and continue. Any problem? Is this necessary application?

  Walter Rodriguez

  E-mail address is removed from the privacy *.

  10/07/12

  14:57

  Hello

  1. do you receive this after you see Start button or entry?

  2 have you made any changes to the computer before the show?

   

  Method 1: Boot errors are fixed by the clean boot.

  Perform the clean boot and see if that helps.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  Reference: How to solve a problem by performing a clean boot in Windows Vista or Windows 7:

  http://support.Microsoft.com/kb/929135

  Note: when you're done to diagnose, follow step 7 in the article to start on normal startup.

   

  Method 2: Some malware parody itself as InfoCenter.exe, especially when it is located in the folder c:\windows or c:\windows\system32.

  I suggest you make a system full scan just to be sure.

  Here is a link that will give you information on how to perform a full scan of the system:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  , Note 1: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Note 2: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

• "Title of the document is not a valid windows32 application" error message when opening Word.

  Whenever I try to open a Word document on my desktop, you receive this error message. "Title of the document is not a valid windows32 application.

  can how I recover from this problem, thank you!

  Hi Lydia, I believe it's your first post here, welcome to our community!

  You can try to repair Microsoft Word for this problem.  Here's how.

  1. Go to start > Control Panel.  Select programs and features.
  2. In the list, find Microsoft Office and highlight it.
  3. Choose change on the toolbar and then click "fix."

  

  Once finished, it will ask you to restart your computer.

• Receive the error message cannot start the base engine, the application can not continue trying to work with Skype and Intervoip

  Original title: Intervoip and skpye does not work on my computer. When I open the PC screen, cannot start the base engine, the application can not continue. How I have this problem?

  My Intervoip and skpye does not work on my computer. When I opened the PC screens, failed to start the base engine, the application can not continue. How I have this problem?

  Base engine
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/core-engine/a18d491c-25e2-4473-A03B-1f3161c5131b

  Have you tried right clicking on the shortcut to the program or the .exe and select "Run As Administrator"?  Perform, even if your user name is an administrator.

  Try right click on the actual Setup.exe and choosing the option "Run As Administrator"?  Perform, even if your user name is an administrator.

  Two applications load mode safe mode with setting in network or a clean boot?

  Startup options (including safe mode)
  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/default.aspx/KB/929135

  If you test with another Windows user, have the same problem?

  Try running ChkDsk to check your drive for errors. Right click on your drive icon / properties / tools / error checking.  First try checking not be (read-only) to see if it reports any problems file or hard drive.  If this is the case, start by checking the two boxes, in no other rerun.

• Adobe metadata Muse - I was put in the description, the customer wants to appear in the search through properties of the Page engines > metadata > description and nothing changes. I'm not a coder, that I'm a Designer, that's why I love Muse so much,

  -Metadata I was put in the description, the customer wants to appear in the search through properties of the Page engines > metadata > description and nothing changes. I'm not a coder, I'm a Designer, that's why I love Muse so much, but it is a real problem. any help would be appreciated. I watched the tutorial by Dani Beamount already it was very clear but his does not work for me

  What Miss me?

  That you expect your customer as a 'change' ?

  Google does not use the Description so much more. You can always add it, and it might be useful to other search engines and other purposes. But Google structured content, good keywordsand values a good title !

• The first cc was going well until the last update you want to open and then throws a sign indicating that the application could not start properly (0 x 0000142) and the program does not open

  The first cc was going well until the last update you want to open and then throws a sign indicating that the application could not start properly (0 x 0000142) and the program does not open

  
  

  Hi Marcelo,

  You may need to check this: Re: Premiere Pro 2015 won't open after the recent update

  Kind regards

  Navdeep Pandey

• I pay $49,99 and the application does not change "open" again in "trial"... I restarted the creative cloud with the login and nothing change...

  pay $49,99 and the application does not change "open" again in "trial"... I restarted the creative cloud with the login and nothing change...

  Wow!

  So many entries of URL blocker, Adobe, this is the reason why you are unable to activate the CC apps.

  Follow the procedure below:

  • Remove all entries that has name of adobe. Then close the Textedit, it will Autosave.
  • Make sure that there is no entry of Adobe on the inside.
  • Then copy and paste the Hosts file in folder etc.
  • We replace the modified hosts file that we had copied on the desktop with the original Hosts file inside the folder etc.
  • When you are prompted, the authentication by password Mac,
  • Be sure to select the option Replace ...
  • Once you have replaced the Hosts file, double click on it again and check if the Hosts file is free of Adobe entries.
  • In the affirmative. launch creative cloud application and load the list of Apps and check.

• Out of nowhere I get this error message "the application could not start properly (0xc000001g). Click OK ot close the application. "I have uninstalled and reinstalled several times.

  I nowhere hand, I get this error message "the application could not start properly (0xc000001g). Click OK ot close the application. "I have uninstalled and reinstalled several times.

  Hi Kingsberry and almathof,

  Please refer to this thread: Re: Premiere Pro 2015 won't open after the recent update

  Thank you

  Regalo

• I get this error every time I open LR, "Lightroom encountered and error during playback of sound preview cache and need to stop smoking" and the application does not open. He said LR would try and correct this error the next time I opened it, but the erro

  I get this error every time I open LR, "Lightroom encountered and error during playback of sound preview cache and need to stop smoking" and the application does not open. He said LR would try and correct this error the next time I opened it, but the error remains. I tried uninstalled and installed the application and the error remains. I use Windows 8.

  Manually delete the cache of the preview of your user folder.

  Mylenium

• I downloaded installer creative cloud and that you have installed, but the application is not the case for is on my computer, nor will be any Adobe programs start download from the download page.

  I just bought my monthly plan for above programs and I am trying to download Adobe Creative Cloud as well as all other programs, but after downloading the adobe creative cloud and installation, the application installer is not where. Programs such as photoshop and indesign will not begin even download from the download page, even though it says "program download".

  Uninstall anything cc which is installed, clean (use the CC cleaning tool to solve installation problems |) CC, CS3 - CS6), and then reinstall the application of cc, Download Adobe Creative Cloud apps desktop | CC free trial Adobe

  Use the desktop application to install your other programs of cc.