Design of Directory directory, need help, Picts attached as zip file

Similar Questions

• I bought cs6 design web premium, I need some somware to open the file "7z".

  I bought cs6 design web premium, I need some somware to open the file "7z".

  You can view the applications download Creative Suite 6 to download the software. To open the 7z file, you can download WinRAR from WinRAR download and support: download

  Hope this will help you.

  Concerning

  Hervé Khare

• I need help with a problem of file softdub.dll any answers or how to replace it?

  I need help with a problem of file softdub.dll all the answers, or how to replace it?  Yes, it's a problem of Vista vs itunes and apparently I lost? This file somehow.  I have no idea how blessed remedy.  I tried all the normal fixes / easy I know, but I am a novice at best.  so please, be gentle and try to guide me through a response.  Please, I beg you!

  Hello

  Did you download and save iTunes on the desktop > then right-click > select run as administrator to install?

  If you don't have anything done, see if this information helps you.

  "Not to install iTunes or QuickTime for Windows"

  http://support.Apple.com/kb/HT1926

  «Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7»

  http://support.Apple.com/kb/HT1923

  If the advice already given does not, please contact Apple for assistance.

  "iTunes support-how to use iTunes.

  http://www.Apple.com/support/iTunes/

  "Contact iTunes Support.

  http://www.Apple.com/support/iTunes/contact/

  Or ask in the community Apple iTunes:

  https://discussions.Apple.com/community/iTunes

  See you soon.

• FlashDrive work just need help? can not open files

  I need help read the files.

  Hello

  1 did you change on your computer before this problem?

  2. this issue occurs when opening a particular file in a flash drive?

  3. what happens when you try to open the files?

  4 What is the flash player recognize in disk management and Device Manager?

  5. which version of the operating system is installed on your computer?

  6. what version of the operating system Windows am I running?

  http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

  Post back with more information for you help in this matter.

  Reference:

  Open the Device Manager

  http://Windows.Microsoft.com/en-us/Windows7/open-Device-Manager

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

• Need help to retrieve the XML file

  Hello

  I'm new to xml query and I need help badly. I have a file xml with the following content. I need help to extract data as:

  beginTime	localDn	measObjLdn	hdlcRxErrAbort	hdlcRxErrCRC	hdlcRxErrLackOfBufs
  2015 07-28 T 14: 45:00 + 03:00	ERSGSN01	MagId.SlotId.E1/T1Trunk.FractionId=2.8.6.1	2400	1020	0
  2015 07-28 T 14: 45:00 + 03:00	ERSGSN01	MagId.SlotId.E1/T1Trunk.FractionId=2.9.3.1	0	0	0
  2015 07-28 T 14: 45:00 + 03:00	ERSGSN01	MagId.SlotId.E1/T1Trunk.FractionId=2.9.4.1	0	0	0

  and the XML data I have are:

  <? XML version = "1.0" encoding = "UTF-8"? >

  <? XML-stylesheet type = "text/xsl" href = "MeasDataCollection.xsl"? >

  " < measCollecFile xmlns =" http://www.3GPP.org/FTP/specs/archive/32_series/32.435#measCollec ">

  < fileFormatVersion = "32.435 V9.0" fileHeader vendorName = "Ericsson" >

  < fileSender / >

  < measCollec beginTime = "2015-07 - 28 T 14: 45:00 + 03:00" / >

  < / fileHeader >

  < measData >

  < managedElement localDn = "ERSGSN01" / >

  < measInfo measInfoId = ' E1/T1, hdlc' >

  < job jobId = "Meas_E1T1_all" / >

  < duration granPeriod = "PT900S" endTime = "2015-07 - 28 T 15: 00:01 + 03:00" / >

  < duration repPeriod = "PT900S" / >

  < p measType = "1" > hdlcRxErrAbort < / measType >

  < p measType = "2" > hdlcRxErrCRC < / measType >

  < p measType = "3" > hdlcRxErrLackOfBufs < / measType >

  < p measType = "4" > hdlcRxErrMaxFrameLen < / measType >

  < p measType = "5" > hdlcRxErrNonOctetAlign < / measType >

  < p measType = "6" > hdlcRxErrQueue < / measType >

  < p measType = "7" > hdlcRxOK < / measType >

  < p measType = "8" > hdlcRxOctets < / measType >

  < p measType '9' = > hdlcTxOK < / measType >

  < p measType = "10" > hdlcTxOctets < / measType >

  < measValue measObjLdn="MagId.SlotId.E1/T1Trunk.FractionId=2.8.6.1" >

  < p r = "1" > 2400 / < r >

  < p r '2' = > 1020 / < r >

  < p r = "3" >/< r > 0

  < p r = "4" >/< r > 0

  < p r = "5" > </r > 0

  < p r = "6" >/< r > 0

  < p r = "7" >/< r > 0

  < p r = "8" > 0 </r >

  < p r '9' = > 295 / < r >

  < p r = "10" > 4130 / < r >

  < / measValue >

  < measValue measObjLdn="MagId.SlotId.E1/T1Trunk.FractionId=2.9.3.1" >

  < p r = '1' >/< r > 0

  < p r = "2" >/< r > 0

  < p r = "3" >/< r > 0

  < p r = "4" >/< r > 0

  < p r = "5" > </r > 0

  < p r = "6" >/< r > 0

  < p r = "7" >/< r > 0

  < p r = "8" > 0 </r >

  < p r '9' = > 295 / < r >

  < p r = "10" > 4130 / < r >

  < / measValue >

  < measValue measObjLdn="MagId.SlotId.E1/T1Trunk.FractionId=2.9.4.1" >

  < p r = '1' >/< r > 0

  < p r = "2" >/< r > 0

  < p r = "3" >/< r > 0

  < p r = "4" >/< r > 0

  < p r = "5" > </r > 0

  < p r = "6" >/< r > 0

  < p r = "7" >/< r > 0

  < p r = "8" > 0 </r >

  < p r '9' = > 295 / < r >

  < p r = "10" > 4130 / < r >

  < / measValue >

  < / measInfo >

  < / measData >

  < fileFooter >

  < measCollec = endTime "2015-07 - 28 T 15: 00:01 + 03:00" / >

  < / fileFooter >

  < / measCollecFile >

  Help, please. I tried to select a value using the following xml query which does not lead to any output:

  WITH t AS (SELECT xmltype (bfilename('SGSN_STAT_ERICSSON', 'A20150728.1445+0300-20150728.1500+0300_Meas_E1T1_all.52'), nls_charset_id('UTF-8')) FROM dual xmlcol)

  SELECT beginTime, localDn, measObjLdn, hdlcRxErrAbort, hdlcRxErrCRC, hdlcRxErrLackOfBufs

  T, XMLTABLE

  (XMLNAMESPACES ('http://www.3gpp.org/ftp/specs/archive/32_series/32.435#measCollec' as 'ns1'), )

  ' / measCollecFile'

  passage xmlcol

  columns

  beginTime PATH VARCHAR2 (32) ' / measCollec/@beginTime',

  localDn PATH VARCHAR2 (32) ' / measData/managedElement@localDn',

  measObjLdn PATH VARCHAR2 (32) ' / measData/measInfo/measValue@measObjLdn',

  ["hdlcRxErrAbort PATH VARCHAR2 (32) ' / measData/measInfo/measValue/r[@p="1 ']',

  ["hdlcRxErrCRC PATH VARCHAR2 (32) ' / measData/measInfo/measValue/r[@p="2 ']',

  "[" hdlcRxErrLackOfBufs PATH VARCHAR2 (32) ' / measData/measInfo/measValue/r[@p="3 ']"

  )

  Sincere greetings

  Either way, using an XQuery FLWOR expression:

  select x.*
  from xmltable(
         xmlnamespaces(default 'http://www.3gpp.org/ftp/specs/archive/32_series/32.435#measCollec')
       , 'for $h in /measCollecFile
            , $v in $h/measData/measInfo/measValue
          return element row {
            $h/fileHeader/measCollec/@beginTime
          , $h/measData/managedElement/@localDn
          , $v/@measObjLdn
          , element r1 {$v/r[@p="1"]}
          , element r2 {$v/r[@p="2"]}
          , element r3 {$v/r[@p="3"]}
          }'
         passing xmltype(bfilename('TEST_DIR', 'test.xml'), nls_charset_id('AL32UTF8'))
         columns beginTime           timestamp with time zone path '@beginTime'
               , localDn             varchar2(32)             path '@localDn'
               , measObjLdn          varchar2(80)             path '@measObjLdn'
               , hdlcRxErrAbort      number                   path 'r1'
               , hdlcRxErrCRC        number                   path 'r2'
               , hdlcRxErrLackOfBufs number                   path 'r3'
       ) x ;
  

• NEED HELP - use in Animate gif files

  NEED HELP

  Reduce the Flash to animated GiF file file - reduce 65 KB without any loss of quality? How can I reduce a flash file for this standard of the industry?

  If you make an animated gif which must be less than 65 k, you need to use Photoshop, not animate and keep it under 5 total frames.  It won't be a complex animation with transitions and tweens; It would be fair to turn several different images/pictures.  Take a look at this tutorial I posted above to get an idea of the kind of thing you could do in a few images.

  For HTML5 Canvas in CC host, the source file is still a Fla, but published files will be HTML, Javascript, and images.  Do not build a HTML5 banner unless the plan of the record/media for what you work on him to permit.

  If HTML5 is allowed, you should know how ads are served (through Sizmek, DCM, Adwords, Flashtalking, etc.).  Each adserving company has slightly different requirements in terms of how files should be put in place and how clickTags should be implemented, so I can not give you any other advice, unless you know how your ads are served.

• Need help with sizing and save files in batches

  Hi need help with a project.

  I have thousands of vector files that I need size of 350px X 350px, and then place it on a work plan x 600px-600px.

  Then I need to save it to the web as a PNG with a transparent background.

  Could I do a script for? or is there another way to do it in batches?

  I wouldn't have to open them one by one and resize the work plan then the image and save it one by one as that would take forever.

  Any help some suggestions would be greatly appreciated.

  ID do as a series of actions photoshop if the end result is png,

  pro image processor can help you make automatically, if you must resize batch additional... >

  https://sourceforge.NET/projects/PS-scripts/files/image%20Processor%20PRO/v3_2%20betas/

  I think that your work can run in a few steps, but for simplicity, I would like to start / test with a new photoshop action recording

  Open a file, change the size of the image to 350 x 350

  Change the canvas size,

  then save under...

• Need help to create a pdf file

  I need help creating a PDF with me for free!

  Thanks everyone, I solved the problem.

• Need help to attach a SAN volume 10TB

  I have a SAN Equallogic PS4000e network. When I had a physical Server 2008 I was able to fix a volume 6 to on the server and I saw all the 6 TB using the iscsi Initiator in Server 2008. I now have a Virtual Server 2008 and I need to reach a volume of 10 to and see everything to the virtual server. I can add 2 TB using the VMFS 5 but not greater than. I have the config network for ISCSI VMware Setup. I'm not a fan of spanning multiple disks etc. and prefers it appeared to the virtual machine as a single unit.

  I use RDM for the largest 2 TB disks?

  Thank you

  Yes, currently only RDM in physical (pass-through) mode in charge most of ~ 2 TB (up to 64 ~ to).

  André

• Network design... Need help cont.

  I redid this thread in order to give the points. Here's the original:

  http://communities.VMware.com/message/1515861#1515861

  1. vMotion and HA will not work if you have virtual machines stored on the hard disk of the local server. This is why you MUST use a SAN. Centralized storage allows all servers see virtual machines, so being able to move VMs from server to server is possible (iSCSI, NFS, FC, FCoE). If the virtual machines are sitting on the local server, you can not have HA or vMotion.

  2. don't shoot yourself in the foot and try to start production on 2 network cards. You'll end up with people shouting at you on performance. Get a detailed plan and follow it carefully. Get the right equipment and infrastructure in place first or people will not want to embrace virtualization

  Your installation will work? Yes.  It will be the best performance? N ° you need to invest in some more NIC (6 physical NIC in ESX host is a minimum of IMO, I usually go with 10. There you have before, levels of redundancy and less liklihood of the neck of the bottle.

  If you can't do anything else and MUST use 2 network cards, I would honeslty think to keep everything on 1 vSwitch and tagging VLAN to the port of vSphere group layer. In this way, you can use two NICs for all traffic. No best practices.

• I need help doing things with batch files

  This applies to All THE VERSIONS OF WINDOWS and probably relates more to MSDOS than any other.

  cmd.exe or notepad.exe and comand.com applications

  I'm doing some kind of Setup.

  I have a tool nice lottle I did that works with a batch file. and he has 3-4 text file sthat go with it. I wanted to make a batch file which would act as an installer. make the MainMenu.txt, ReadMe.txt, Credits.txt, DISCLAIMER.txt fill them with the correct values, then make the .bat file that acts as the user interface. and when this launch the batch file under its weight made it has created (and not as a child of cmd window) then delete itself so all that remained was the new files...

  I tried the command IF [NOT] EXIST filename command because it's the only IF the syntax I have any slight understanding of

  EXAMPLE OF

  mkdir EXAMPLE

  EXAMPLE of CD

  IF [NOT] EXIST MainMenu.txt GOTO CMAIN

  : CMAIN

  ECHO the text I want to be in the lead > MainMenu.txt

  pause

  EXAMPLE OF

  but when I run the command 'Betainstall.bat' file, it opens and then closes immediately. What would be nice if it was the CASE of WAT I TOLD it to. it doesent need to be opened, because it only creates a directory then makes em fills with files on and its done... but it doesent do anything. and since it closes too quickly it's a bit hard to read all the messages that appears. (im not fast enough for print scrn) and addition of the pause at the end did not a thing. and / k has ever helped me before

  so someone who knows nothing about MS-DOS or command prompt this is a great opportunity to showcase the prowess of youre

  I just need to find how to get cmd to delete the last entry of Y.

  If I could get the Y equal to NULL it should write the %M % and not okay right?

  For the first part of what I mentioned above, you can simply do:

  SET M =

  The M variable will then to null.

  However, for what is in quotes: No. get M set to null will do what you want.  Use the command I mentioned in my previous post.  Note the signs double% to get the result of %M % in the command of the user file.

  IF the echo % M %! == 1 ! Goto: whatever > USER - X 2. 0.Bat

  Then the USER - X 2. 0.Bat will contain the line:

  IF M %! == 1 ! Goto: whatever

  Now, from your original:

  SET /p M = type OK or CANCEL, and then press ENTER:
  IF %M % IS INSTALL OK GOTO
  IF %M % IS CANCEL LEAVE
  : INSTALL

  You can see that if the M variable contains not exactly the capitals OK or CANCEL capitalized (that you specified), then the second half of each IF statement will not be executed. Your sample of what is getting written to the file USER - X 2. 0.Bat, you typed tiny ok and it works again the part of the installation of your batch file because he simply fell thru to the: part of the INSTALLATION.

  What you want is a batch program that allows to anticipate all possible ways that the user could answer "correctly". When you check if the variable M is equal to OK, it checks that specifically. All other cases the letters will not be the exact match.  That's why I ran three different lines looking for okay, okay, then OK.

  The fall same thru happen here:

  SET /p M = press on, then ENTER:
  IF %M % == y GOTO RUN
  : RUN

  Because the only thing you're looking for is there it will be Goto: EXECUTION of the IF statement , if (and only if) M is exactly there, but if it is equal to anything else it will fall through to the next line which is your: block RUN. As you have, any response is typical for the "SET/p M = press on, then ENTER", it's going to fall through and get to the: RUN block. The only exception is that if the user presses the enter only key, it will then generate the error message that I mentioned and end the batch file. That's why I used the! at the end of the two %M % and on the end of what we test, such as OK! This test if the user pressed the key entry in itself without the batch file, which gives an error.

  So, instead of this:

  IF the ECHO %M % == 1 GOTO RUN > USER - X 2. 0.bat
  IF the ECHO %M % == 2 GOTO README > USER - X 2. 0.bat
  IF the ECHO %M % == 3 CREDITS GOTO > USER - X 2. 0.bat
  IF the ECHO %M % == 4 GOTO WARNING > USER - X 2. 0.bat
  IF the ECHO %M % == 5 GOTO EOF > USER - X 2. 0.bat

  Use this:

  IF THE ECHO % M %! == 1 ! GOTO RUN > USER - X 2. 0.bat
  IF THE ECHO % M %! == 2 ! GOTO README > USER - X 2. 0.bat
  IF THE ECHO % M %! == 3 ! GOTO CREDITS > USER - X 2. 0.bat
  IF THE ECHO % M %! == 4 ! Disclaimer GOTO > USER - X 2. 0.bat
  IF THE ECHO % M %! == 5 ! GOTO EOF > USER - X 2. 0.bat

  Or use which does the same thing, but look more pretty:

  IF the echo % M %! == 1 ! Goto: run > user - X 2. 0.Bat
  IF the echo % M %! == 2 ! Goto: ReadMe > user - X 2. 0.Bat
  IF the echo % M %! == 3 ! Goto: credits > user - X 2. 0.Bat
  IF the echo % M %! == 4 ! Goto: warning > user - X 2. 0.Bat
  IF the echo % M %! == 5 ! Goto: EOF > user - X 2. 0.Bat

  (Upper and lower case for the block names all answer the same, whereas they are not nit-picky as the tests within the statement itself. I put the: before the labels of block in the IF statement so I know it's a label. I left the uppercase EOF because it is an acronym for end of file. And I use IF instead of If since it's a small order and I like it to stand. This bit is just my personal preference.)

  Another thing, you can make is for your first redirection in User - X 2. 0.Bat is to use the single > crush entire previous existence of this file. Then for forwarding the following him, continue the > who is the operator 'Add file '.

  Better yet would be first to check if the file of the user - X 2. Bat is and give the user the possibility to replace, rename, or to have an abortion.

  Clear as mud now? :)

  Edit: I just looked and I see that you are already doing the single > for the first time. Pass over my hikes on this part. Laughing out loud

• Transfer of files from the old HARD DRIVE to new computer without an old computer. (He's dead - can not use) I have the hard drive, but need help to transfer my old files and settings.

  ·        My old Win XP computer died - it is completely unusable. I bought a new PC with Win 7 Pro and 1 TB. I still have the old HARD DRIVE (250 GB) which I have attached on the new computer using an external enclosure supports SATA drives. The external hard drive is connected to the computer in USB 3.0. I checked that the new computer can see the external hard drive. (I also used for backups by changing the hard drive with a 2 TB drive 'mass storage' - that works.)

  I searched the internet for possible solutions and found no help. If the transfer of files from Microsoft would change the disc to analyze, it would be simple. But if I select the OLD computer it scans the disk I'm on (new) - automatically.

  Is there anyone who has had the same problem? He must be because computers die all the time and people buy new computers - who then, somehow, they get the former transferred files. I could do it manually, but that wouldn't change the settings. Last resort would be to buy an old computer XP (SATA), replace the drive. Transfer the files, and then sell this computer.

  You may be able to recover your data files, but I hope that you will set up your new system to automatically backup a second internal hard drive or an external USB hard drive.

  This suggestion may not work, but it's worth a try. Buy an external USB drive enclosure. They come in two sizes 2.5 "for the portable computer drives and 3.5" for desktop disks. You can purchase adapters for 3.5 "envelopes so that they can also be used with a portable player. Place the hard drive in the enclosure and connect to a USB port of another computer. Several hard disks are more able to start, but the contents of the disc can still be accessed, read and copied from the disk because you do not use the operating system on a failed disk.

  Here is an example of the type of device, I suggest:
  http://www.amazon.co.uk/s/?ie=UTF8&keywords=external+hardrive+enclosure&tag=googhydr-21&index=aps&hvadid=14388537836&hvpos=1t1&hvexid=&hvnetw=g&hvrand=556960941559985931&hvpone=&hvptwo=&hvqmt=b&ref=pd_sl_32uorbwbuk_b

  You need only to the speaker, that you see are not necessarily more expensive. Thereafter, you can put an old hard drive usable, an abandoned because you need a larger drive internal, in the enclosure and use it as additional external storage.

• Need help to move a project file containing...

  So I was working on my computer of friends a little and had a whole project done in CS4. I had to restore his computer and so I moved the folder (which contained all THE stuff of project including render files, etc.) to my computer. Now when he is on my first computer can't find the files and I have manually search all files of 100 or more. Two questions/problems:

  1. If I moved the folder (that was on the desk) which contained what first needs including render files, why he can't find clips? Even if it uses relative locations if she shouldn't be able to locate everything if the folder is placed on my desk?

  2. it says «can't find _.» So I find it manually, but then he jumps the rest of the clips and leaves me not find more than one. What should I do?

  Adobe does not use relative file locations. It uses absolute locations. So to move all the files, the drive letter and the entire directory structure must be the same. From the looks of it your storage space was not very organized, if PR cannot find a file and then asks for the location of the next file. Result in an organized way, PR would only need the first file and can then find all the other files automatically.

  By far the best way out is to use an external drive, which received a letter from fixed drive in disk management, and copy all the relevant files of your PC friends on this disc. Go home, and then use this external drive for your project. (Note that this external must be preferably an eSATA disk, not a USB drive).

  The alternative is to get things organized with regard to the absolute file locations. It may take some time, but it is worth it and has been a lesson for the future do not use "Desktop" to locate your files.

• Need help to open a pdf file

  I can't download a pdf file (document not a picture) and when I navigate what to open with nothing is there which will open it.  There is also the possibility to download a zip, but don't know anything about.  Anyone know how I can open it?

  Hello

  You may need to install/reinstall the latest Acrobat Reader

  Acrobat Reader - free - uncheck the Google toolbar unless you REALLY want it
  http://get.Adobe.com/reader/

  I hope this helps.

• Need help to reset the associated file.

  Original title: DLL Microsoft Deprecated components - I need to re - setup my default return records!

  I put my. LNK and a few other files to open in realplayer video player! I thought all the files I was looking at were for media - they were not!   How can I re set my files to what they were! I already totally uninstalled Realplayer from Realplayer.com and restarted the computer, in the hope that could FORCE a reset!   as you can tell, I am not very tech-savvy, - please help!

  Right click on a file of a given type and then go to properties and click change and then set the program you want to open the file with.
   
  Steve
   
  wrote in message News: * e-mail address is removed from the privacy *...

  I put my. LNK and a few other files to open in realplayer video player! I thought all the files I was looking at were for media - they were not!   How can I re set my files to what they were! I already totally uninstalled Realplayer from Realplayer.com and restarted the computer, in the hope that could FORCE a reset!   as you can tell, I am not very tech-savvy, - please help!