DeskJet 3050 said wireless radio is off, turn on

Similar Questions

• Wireless on HP Deskjet 3050 a - J611 radio

  Hello world!

  I had my HP Deskjet 3050 a - J611 wireless printer set up sometimes too before on two different networks.

  But I have moved and deed of sale to set up again...

  Initially through the push button method he was always trying to connect to my SSID old so I put every thing to the original settings.

  But now I get an error code saying I turn on my radio wireless to the printer.
  To the best of my knowledge, I have: configuration > wireless > wireless settings > wireless switch

  Any ideas?

  mruttle,

  If you are looking to perform the replacement step to get the new information from the network, then no.

  The heart of the problem is that the printer indicates the wireless radio is off and there is no network name for your printer.  The SSID of the printer, when the network is present, must have HP in the name making standout from other networks.

  On the printer, go wireless > settings > default network.  Accept the prompt to reset the default settings.

  Most of the printers to disable radio wireless as a default setting.  Press the wireless button again.  If she turns in the lower right corner, go ahead and select this option.

  Now, go to the computer and search for a wireless network.  Is there a network name that inside HP or reflects your printer model?  If so, connect to the network, open a web browser and go to 192.168.223.1.  From there on, the previous steps should work.

  Let me know what happens.

• Lost the icon to turn the wireless radio on/off

  I have a R61i.  Can someone tell me how to get the icon in the system tray that enables or disables the wireless radio? I must have deleted somehow. Thank you.

  http://www-307.IBM.com/PC/support/site.WSS/TVAN-home.html

• Wireless radio does not turn on

  I'm brand new and quite clueless when it comes to portable computers, as I've always been a PC user, but my landlord gave me her laptop in the hopes that I can find the problem with him. Unfortunately, I can't understand anything. My boyfriend has spent hours on the phone with support from Lenovo get new drivers and everything but we still can't Radio wireless power so that we can a wireless connection.

  The PC I'm using right now has a router attached to it, and the laptop is sitting at least 2 feet away on the desktop. It SHOULD be able to read a wireless signal, and I see other connected to my network from my neighborhood, so it's certainly a problem with the laptop.

  If anyone can help me understand what the problem is, it would be greatly appreciated! I don't know how this man was able to block his Wi - Fi connection so bad, but I'm about to pull my hair! Laughing out loud.

  If you hhit fn + f5 and nothing happen. You do not have / or has not properly install HOTKEY driver. If something is launched 'say a black window' that has a tab of wireless radio and it shows the State is disabled. You hit power beside him and he does not change. You have probably not the "HARDWRAE", "lit" wireless switch and the green list. Only the wireless led light above your keyboard green show. It looks like an antenna with waves coming out of it.

• Satellite P10: Wireless Radio refuses to turn on

  I got a wireless Broadcom BCM4306 (mini-PCI) adapter and put it in my laptop. The specifications of the laptop are:

  Toshiba Satellite P10, 768 MB of RAM (256 upgrade) & 2.66 GHz P4 (HT disabled).

  The wireless adapter works on another laptop, but not on this one as the guard software complain that the radio is turned off. In the Windows wireless network configuration, it is enabled, but the software doesn't seem to see it. The wireless switch is turned on, but the wireless light is not on i assuming that it lights up when a wireless adapter is present and active. By pressing Fn + F8 does nothing more, no logo appears on the screen for this function or makes no noise.

  I have no idea what is the problem, but any help would be appreciated.

  Hi, I read in the forums that covering the 11 pin and PIN 13 of the mini-pci card can make your card can be used. However, it seems that there is no way, for now, to make the change in hardware to work.
  You can do a search in this forum, or if you can go on TechSpot.com forum and do a search for "Toshiba Wifi network" in "storage and networking", you will find the message in question. As for me, I got a Toshiba (g) MiniPCI card in my Tecra 9100. It works, but the hardware switch does not work. (The led is off, regardless of the position of the switch hardware, but the card works and there is absolutely no problem to connect. If you discover something, thanks for posting.
  Good luck!

• Wireless radio cannot be turned on

  Hi all!

  I have a laptop SL500 2746-FMG with Intel wi - fi card. A few weeks ago I noticed that a wi - fi connection gets too often (every 3-5 minutes). I checked the signal strength of my access point, but it was good (-30...-40dB) and another PC on a longer distance worked well.

  I tried to reinstall the drivers for the card, but after that procedure, the status of the radio is always disabled if the hardware switch is turned on, the led is green. When I try to power the device using the Fn + F5 window, nothing happens: the status is always off.

  I tried to reinstall the drivers several times, even delete driver manually and then put it back: Device Manager indicates that the device is functioning correctly, LED lights up green but status is always off

  What could be the reason? Appreciate for any help

  I think that Reinstall Access Connections means it should first be completely uninstalled. I don't see any other different actions of the first Council.
  Spent some time to recover from an August backup system drive - now everything works fine. It was quite difficult step, but nothing.
  I assumed that the cause of the problem was soft (updates from Lenovo are not excluded). So I strongly recommend you to do the regular backups of your system, just in case this kind of problems.
  Thanks, Maliha

• HP DeskJet 3050 a - wireless issues

  Im having real problems to get my portable computer partners to work on the wireless, it used to work and after the two weeks, I now can't make it work wireless, it says its connected to the network - but it will not let me print when I ask to show me the e-mail address of the eprint it tells me it can not connect to the internet... When I try to print from the laptop, it says that it cannot connect to it... someone knows how to solve this problem, because the only reason why I bought this thing was to print wireless... I have given ive re-set default settings via pin and push the same problems everywhere! Please help as I am desprate to solve this problem

  OK, so after - object launched the cd and restart the router... the wireless is back on...

  not for me... never put off the printer to new LOL

• Wireless Radio control does not turn on

  Recently my wireless Radio switch was turned off at startup and when I pressed the Fn with F5 key I received this message

  "The hardware wireless radio switch must be in the position to use wireless radios.

  Now, it was the main features, I have used in the past to turn on the wireless Radio - I had a few opportunities in the past manually disabled to save juice - and he wouldgive me a window with the option to turn away but now just the message above.

  Device Manager indicates I have a processor Intel (R) PRO/Wireless 3945ABG Network Connection #3 and its status is working properly.

  Any help would be most welcome

  There is a mechanical wifi switch on the lower bevel on the edge toward the Center.  With portable vertical slide switch to the right until the Green appears on the switch to turn on the wifi.  You may need to restart for the Fn 5 button to work.

  Here's a url that indicates the location of the wireless radio switch:

  http://support.Lenovo.com/en_US/product-and-parts/detail.page?&LegacyDocID=MIGR-67825

• Can I connect to the Deskjet 3050 wireless and LAN?

  I have connected to a new deskjet 3050 by WiFi. My laptop and iPhone worked well. I have an old desk top that has no WiFi. Can I also connect it to the 3050 by LAN? The office is connected to the router by LAN so it mails to my hpeprint but I would like to connect it directly to the 3050.

  Hello

  The HP Deskjet 3050 include wireless connectivity options and USB, the printer does not include any LAN interface...

  The printer connected to your wireless router, connection from the desktop to the same router via an Ethernet connection is sufficient, the type of conntaction used network is not serious as long as both devices connected to the same router.

  Make sure that ethernet cable connected to your router with a desktop computer and run the installation by selecting the wireless connection, the device should be detected on the network...

  If you wanted to can use a USB for PC connection, you can do the same. the wireless and USB connection can be used simultanly.

  Shlomi

• Scan with HP Deskjet 3050 a problem - analysis only about a quarter of the page

  My HP Deskjet 3050 a wireless print fine with my Mac OS Lion 10.7.3. But whenever I scan something, catches sweep that results from only about a quarter of the page, which swells in size to take to the top of the entire page. (And I am regular sweeping 8 "x 11" documents. ") And I can't zoom in to get the entire page. When I try to change the setting in jpg to PDF utility, to see if that will solve the problem, the utility closes 'unexpectedly' every time.

  Hello
  First, install the critical update below:
  http://FTP.HP.com/pub/softlib/software12/COL41827/MP-101648-1/HP_Scan_for_Mac_OS_X_10.7_Update.dmg

  Now change the settings of the device as follows:
  1 open the HP utility and select your device.
  2. based on Scan Settings open the "Scan to Computer".
  3. click on the tab "scan tasks.
  4. Select the shortcut Scan allows to analyze, and then click on edit.
  5. in the section of scanning from an HP device, click the blue triangle to expand the menu.
  6. in the expanded menu now, open the drop down next to cultures in and set as none.
  7. click OK and try to scan.

  Kind regards
  Shlomi

• Wireless radio turns on and turns off...

  Hi new here and I thank very you much for your help.

  My wireless radio turns off after five minutes on its own.  I saw on the net a fix by going to Access IBM...

  Open connections to access and go in Configure, then global settings.  Uncheck the box "Enable Wireless LAN automatic radio"

  Logins will be automatically turn off the wireless connection when idle to save power.     The only problem here is that Access IBM does not.  He gets up and you can not click on anything.  I read that it is because there was a security hole in an old version of Adobe Access IBM used, and they is plugged but never implemented up to date. You can not use this...    Anyone know how to bypass this or another solution to my problem.   I have a T-40, is said by the way.

  Thank you.

  "Someone posted in another thread Re: wireless radio turns off after using Solutions to access IBM Options forums.lenovo.com/lnv/view_profile?user.id=22919_2";return this.s_oc? this.s_oc (e): true "target = _blank > that they had the same problem, so I tried again understand the correspondent's suggestion, and that is what I did and it works for the last two hours.

  But let me introduce to you the way I found to do it.

  Panel of configuration-system - hardware - click device (bar) Manager - go to network adapters - I RIGHTclicked Duoband Wifi - click Properties - click on Advanced.    In the Mode of energy saving and the radio list we / off, I turned the power saving off the coast and turned the Radio on / off.  Everything seems fine.

  Once again:

  In the properties - Advanced:

  Radio on /'Off - we.

  Off - Mode power saving.

  Thank you for the help and happy that I can spend it.

  See you soon.

• wireless radio turns off every 2 minutes

  I have a Thinkpad Z60t, running on Windows XP.

  I have the wireless switch physical on the side panel on the position we (that is to the right).

  At the beginning, I can't connect to any wireless network without problem. However, after about 2 minutes of not actively using the internet, the green 'radio Wireless' on the front panel turns off and I lose my internet connection. Then I do "Fn + F5" (or ThinkVantage button-> manage my connections-> Radios in Wireless Power on / off) to activate on (and get the light to go back to being green). Then I have to reconnect to the wireless network.

  I think that this is a common problem. I tried several suggestions that I found on other forums, including ThinkVantage button-> manage my connections-> select location-> Open Access Connections profiles-> Configure-> location of switch-> UNSELECT "enable automatic location change". Actually, this method seems to work for a few hours, but then stopped.

  I am sure that my wireless network is stable - my roommate's laptop does not lose the signal every 2 minutes as I do. I think my laptop wireless radio turns off automatically after 2 minutes of no use, and this feature should be turned off somehow.

  Help, please. I'm frustrated to have to reconnect manually every 2 minutes.

  -Ed

  Open Control Panel, go to the system, the property of equipment/system, then go to Device Manager.

  Under the ownership of the wireless card (right click on the wireless card and property select), there are settings for the roaming of aggressiveness, energy saving and power output.

• J611 3050 has installed on Vista and works very well. Installed on Windows 7 and said always the printer is turned off.

  My Deskjet 3050 a J611 is installed on Vista and it works fine. I then installed on a Windows 7 and the installation went well. No error message came, but when I try to print nothing happens, it just sits in the queue. When I run the diagnostic windows to solve the problem it says the printer is turned off. But it's not far, I can print the Vista machine.

  Download and run this utility on the Win 7 machine: http://h20180.www2.hp.com/apps/Nav?h_pagetype=s-926&h_lang=en&h_client=s-h-e17-1&h_keyword=dg-NDU&jumpid=ex_r4155/en/hho/ipg/forum/network_diag/

  What did he say?

• IdeaPad z460 - how to turn off the physical wireless radio button?

  Hello...

  It is possible to disable the wireless radio button? It's very annoying when I disable the wireless without notice and wasting time trying to figure what happened.

  TKS,

  Hi neokenchi,

  Then... Thanks again for the reply, but I'm a little disappointed that I can't set (enabled) button.

  The only way is to avoid touching this unawareness button...

• DeskJet 3050 j610: unable to connect my printer HP Deskjet 3050 J610 to my network wireless at home

  I recently change my router a Netgear to a Lynksys wireless. I can't go to my printer. I tried to use the printer setup wizard thing (temporarily connect a USB key), which is on the printer stop blue wireless light flashes, but still couldn't print. When I print a report out of print it directly, the "Configuration Summary" shows the outskirts name (SSID) and Netgear84 (my old router). I can't get printing recognize on the new router/network.  Help, please

  Hey @dbot,

  Welcome to the Forums of HP Support! I hope you enjoy your stay here.

  I understand that you have some problems with the printer all-in-one Deskjet 3050 connection to your new router. I can help you with that.

  First of all, we will restore the default values of network on the printer. To do:

  Remove the USB cable to the back of the printer.

  On the printer, press the wireless icon that looks like a radio tower.

  Click on the white button next to settings.
  Click on the white button next to default settings.

  If there is a screen asking you to confirm, then press the white button next Yes. Blue wireless light should turn off.

  Now on your PC we will uninstall all software associated with the printer.

  Download and install the latest drivers by clicking on this link.

  Once installation is complete, you should have the printer connected to your wireless network.

  Please let me know if this solves your problem or if you have any other questions. If not, have a great weekend!

  If this solves your problem then please help others to find this post by clicking on accept as Solution on my post.

  If you appreciate my help so please let others know by clicking on the icon below my post thumbs up.