Wireless radio cannot be turned on

Similar Questions

• DeskJet 3050 said wireless radio is off, turn on

  Our printer is the printer deskjet 3050 has, and since we went to Maverick we lost access to some of our features (Scan 3).  Now, we've lost our wireless capabilities.  On the network says Wireless Test "on your HP printer wireless radio is currently disabled."  Solution - "for a wireless connection, you must activate the radio on your HP printer wireless.  Refer to the provided with your HP printer installation Guide ".  I looked my Guide series and looked online but I can't find anywhere how to turn on the wireless radio, please help!

  If the radio does not turn on, the radio equipment is probably defective. I would call HP 800-474-6836 Support

• Wireless adapter cannot be turned on

  I have a HP Pavilion dv6-1245dx laptop. The operating system is Windows 7 Home premium upgrade from Vista, at the time where HP has offered the upgrade using as soon as Windows 7 is out. The laptop stopped booting and I had to do a complete reinstall of Vista family premium, then the upgrade to Windows 7. After that, I did a restore of Windows Image on an image recorded using the Windows backup file. The laptop seems to work normally now except for one thing. Now the electronic switch at the top of the keyboard for the wireless card will not work. This is the type of switch that works when you put a finger on it. The adapter is disabled and cannot be turned on. I tried the driver update - he said that the pilot was the last. A similar switch that enables or disables the audio to the speakers work properly. Can anyone help?

  Welcome to Clay.

  Try to run the driver quick launch button.

  In the section keyboard and mouse.

  Be sure to choose WIN7 32 or 64 bits.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4062&LC=en&cc=us&DLC=en&sw_lang=&product=3979380#N342

  REO

• Wireless radio does not turn on

  I'm brand new and quite clueless when it comes to portable computers, as I've always been a PC user, but my landlord gave me her laptop in the hopes that I can find the problem with him. Unfortunately, I can't understand anything. My boyfriend has spent hours on the phone with support from Lenovo get new drivers and everything but we still can't Radio wireless power so that we can a wireless connection.

  The PC I'm using right now has a router attached to it, and the laptop is sitting at least 2 feet away on the desktop. It SHOULD be able to read a wireless signal, and I see other connected to my network from my neighborhood, so it's certainly a problem with the laptop.

  If anyone can help me understand what the problem is, it would be greatly appreciated! I don't know how this man was able to block his Wi - Fi connection so bad, but I'm about to pull my hair! Laughing out loud.

  If you hhit fn + f5 and nothing happen. You do not have / or has not properly install HOTKEY driver. If something is launched 'say a black window' that has a tab of wireless radio and it shows the State is disabled. You hit power beside him and he does not change. You have probably not the "HARDWRAE", "lit" wireless switch and the green list. Only the wireless led light above your keyboard green show. It looks like an antenna with waves coming out of it.

• Satellite P10: Wireless Radio refuses to turn on

  I got a wireless Broadcom BCM4306 (mini-PCI) adapter and put it in my laptop. The specifications of the laptop are:

  Toshiba Satellite P10, 768 MB of RAM (256 upgrade) & 2.66 GHz P4 (HT disabled).

  The wireless adapter works on another laptop, but not on this one as the guard software complain that the radio is turned off. In the Windows wireless network configuration, it is enabled, but the software doesn't seem to see it. The wireless switch is turned on, but the wireless light is not on i assuming that it lights up when a wireless adapter is present and active. By pressing Fn + F8 does nothing more, no logo appears on the screen for this function or makes no noise.

  I have no idea what is the problem, but any help would be appreciated.

  Hi, I read in the forums that covering the 11 pin and PIN 13 of the mini-pci card can make your card can be used. However, it seems that there is no way, for now, to make the change in hardware to work.
  You can do a search in this forum, or if you can go on TechSpot.com forum and do a search for "Toshiba Wifi network" in "storage and networking", you will find the message in question. As for me, I got a Toshiba (g) MiniPCI card in my Tecra 9100. It works, but the hardware switch does not work. (The led is off, regardless of the position of the switch hardware, but the card works and there is absolutely no problem to connect. If you discover something, thanks for posting.
  Good luck!

• Wireless antenna cannot be turned on (P10)

  I bought the wireless pci card PA3300U-2MPC card (Atheros AR5001X +) for my satellite p10 251 (Win XP Home). Using installation guides, I installed it with precaution, connected with black and white cables. Then installed the driver, after that the Atheros software. The result - the wireless connection does not work. Configfree software both Atheros bring the message "turn on the wireless switch", but the switch is in position "On". When I press Fn + F8, it's the same message.

  The device is compatible with my laptop, according to the ebay seller. I also found on the Internet a Toshiba-Schwitzerland pdf file, when it is shown, that this card is compatible with all mobile phones of P10.

  Does anyone have an idea, what the problem?

  Hi gav

  Is the map propely recognized and installed (Device Manager status)?

  Try using the ConfigFree tool. This network of application monitoring can give you information on potential connectivity problems. On the right side, you can find possible solutions.

  Good luck!

• Wireless Radio control does not turn on

  Recently my wireless Radio switch was turned off at startup and when I pressed the Fn with F5 key I received this message

  "The hardware wireless radio switch must be in the position to use wireless radios.

  Now, it was the main features, I have used in the past to turn on the wireless Radio - I had a few opportunities in the past manually disabled to save juice - and he wouldgive me a window with the option to turn away but now just the message above.

  Device Manager indicates I have a processor Intel (R) PRO/Wireless 3945ABG Network Connection #3 and its status is working properly.

  Any help would be most welcome

  There is a mechanical wifi switch on the lower bevel on the edge toward the Center.  With portable vertical slide switch to the right until the Green appears on the switch to turn on the wifi.  You may need to restart for the Fn 5 button to work.

  Here's a url that indicates the location of the wireless radio switch:

  http://support.Lenovo.com/en_US/product-and-parts/detail.page?&LegacyDocID=MIGR-67825

• wireless radio turns off every 2 minutes

  I have a Thinkpad Z60t, running on Windows XP.

  I have the wireless switch physical on the side panel on the position we (that is to the right).

  At the beginning, I can't connect to any wireless network without problem. However, after about 2 minutes of not actively using the internet, the green 'radio Wireless' on the front panel turns off and I lose my internet connection. Then I do "Fn + F5" (or ThinkVantage button-> manage my connections-> Radios in Wireless Power on / off) to activate on (and get the light to go back to being green). Then I have to reconnect to the wireless network.

  I think that this is a common problem. I tried several suggestions that I found on other forums, including ThinkVantage button-> manage my connections-> select location-> Open Access Connections profiles-> Configure-> location of switch-> UNSELECT "enable automatic location change". Actually, this method seems to work for a few hours, but then stopped.

  I am sure that my wireless network is stable - my roommate's laptop does not lose the signal every 2 minutes as I do. I think my laptop wireless radio turns off automatically after 2 minutes of no use, and this feature should be turned off somehow.

  Help, please. I'm frustrated to have to reconnect manually every 2 minutes.

  -Ed

  Open Control Panel, go to the system, the property of equipment/system, then go to Device Manager.

  Under the ownership of the wireless card (right click on the wireless card and property select), there are settings for the roaming of aggressiveness, energy saving and power output.

• Wireless radio turns on and turns off...

  Hi new here and I thank very you much for your help.

  My wireless radio turns off after five minutes on its own.  I saw on the net a fix by going to Access IBM...

  Open connections to access and go in Configure, then global settings.  Uncheck the box "Enable Wireless LAN automatic radio"

  Logins will be automatically turn off the wireless connection when idle to save power.     The only problem here is that Access IBM does not.  He gets up and you can not click on anything.  I read that it is because there was a security hole in an old version of Adobe Access IBM used, and they is plugged but never implemented up to date. You can not use this...    Anyone know how to bypass this or another solution to my problem.   I have a T-40, is said by the way.

  Thank you.

  "Someone posted in another thread Re: wireless radio turns off after using Solutions to access IBM Options forums.lenovo.com/lnv/view_profile?user.id=22919_2";return this.s_oc? this.s_oc (e): true "target = _blank > that they had the same problem, so I tried again understand the correspondent's suggestion, and that is what I did and it works for the last two hours.

  But let me introduce to you the way I found to do it.

  Panel of configuration-system - hardware - click device (bar) Manager - go to network adapters - I RIGHTclicked Duoband Wifi - click Properties - click on Advanced.    In the Mode of energy saving and the radio list we / off, I turned the power saving off the coast and turned the Radio on / off.  Everything seems fine.

  Once again:

  In the properties - Advanced:

  Radio on /'Off - we.

  Off - Mode power saving.

  Thank you for the help and happy that I can spend it.

  See you soon.

• What should I do if the wireless radio does not work and cannot connect to the wireless router?

  What should I do if, during the installation of my c309a Photosmart Premium printer all in one, which I am trying to install a wireless connection, I get an error message that the wireless radio is not working?

  Solved by turning the radio off and then on new wireless.

• IdeaPad z460 - how to turn off the physical wireless radio button?

  Hello...

  It is possible to disable the wireless radio button? It's very annoying when I disable the wireless without notice and wasting time trying to figure what happened.

  TKS,

  Hi neokenchi,

  Then... Thanks again for the reply, but I'm a little disappointed that I can't set (enabled) button.

  The only way is to avoid touching this unawareness button...

• Lost the icon to turn the wireless radio on/off

  I have a R61i.  Can someone tell me how to get the icon in the system tray that enables or disables the wireless radio? I must have deleted somehow. Thank you.

  http://www-307.IBM.com/PC/support/site.WSS/TVAN-home.html

• Smartphones blackBerry "Radio Off" and cannot be turned on via 'manage connections '.

  Hey all, hoping someone has seen this before on the curve.  I ran downstairs to the power and the radio stops automatically, but now, no matter what I do that worked previously, (make a call/go in manage connections-"Turn on all connections") the radio does not turn on.

  Any ideas or advice before I commit to BlackBerrycide?

  Hi and welcome to the forums!

  Try to remove the battery when the phone is turned on,

  Let it down for a minute, then replace, leave the device completely restarts

  1-3 minutes, see if the problem comes back.

  Thank you

• Wireless Manager cannot connect to 3G T-Mobile provider

  Hi @ all,

  I test the Toshiba Wireless Manager 5 (5.2.1047.66) on Windows 7 RC1 64 bit and I have the problem, that the Toshiba Wireless Manager cannot connect to T-Mobile. He always timedout while trying to connect.
  I don't see why. If I use a numbering Windows connection then I'll connect to the ISP network.

  does anyone have an idea?

  Kind regards

  Alen Ahja

  Hello

  The profile used is taken from your provider's SIM card - do not try to create one yourself. He usually works with the settings.

  Try this:
  1. disable the 3 G module and exit the Wireless Manager.
  2. wait 5-10 seconds.
  3. turn on the 3 G module, and then open the Wireless Manager.

  Should work?

  I have the problem that the module disconnects after a while. After it is not possible to reconnect because the Wireless Manager does not respond or I get a problem of downtime as yours.

  See you soon
  Kingkiwi

• HP c309a wireless radio does not, help

  THX in advance for the help. I'm trying to set up printing from my IPad on my hp c309a printer wireless. Can't get it to connect. Just ran diagnosis on the printer wireless. Says ' wireless radio does not. Any help?  THX

  The Radio not work wireless message usually indicates a problem with the card wireless in the printer. I'll try to do a hard reset of the printer. A hard reset will attempt to restore the printer to a good working condition and no settings are lost with a hard reset.   If the reset does not work then you can contact support at 800-474-6836.  The link below provides warranty options.

  Out-of-warranty options.

  Contact Hp outside the United States.

  1. when the printer is turned on power, unplug the power cord at the back of the printer.
  2. unplug the power cord from the wall outlet.
  3 reconnect the power cord to the product and the wall outlet and then press the power button.
  
  Let me know how it goes.