DeskJet 932 c: 932 c prints alignment page but nothing else

This printer worked like a champ since Windows 98!  When I recently switched from Windows 7 to Windows 10, he worked again like a champion.

I replaced the black ink today, and he will just print the alignment page.

If I try to print a test page, Windows 10 only tells me there is an error and it will not be printed. No error number or anything.

If I try to print anything else, I get the same results.

I have no orange lights, just the clear green power is on.

If I open the lid, it points to the sad face with a top point.

It is connected via LPT port, which I installed in my computer.

I have no idea what to do now. Any help would be fantastic.

Problem solved. I returned the faulty cartridge with a new one. Printer did not work. I returned the perfectly good ink cartridge and my money back. Then I bought another printer. And had leftovers for change.

Tags: HP Printers

Similar Questions

  • HP C4780-Print Test Page but nothing else

    All of a sudden my HP Photosmart C4780 won't print a computer in the House. (Other prints of him). I can print the test page and that you have run the HP Dr software and it says printer is OK, but cannot print anything else.

    I uninstalled and reinstalled the printer and still does not print anything else than the test page.

    Hello and thanks for your response update.

    Just to check something, since you stated that you receive an error message indicating "USB port is not connected. Please check if the USB cable is connected to the printer, and then follow the power cord and make sure it is plugged into your computer.

    When you reinstalled the software for your Photosmart C4780, installation, was your detected USB cord and has been the success of the software?

    If you have the USB cable is connected, but it does not detect through the computer, please follow this document HP troubleshooting connections USB.

    Let me know if it solves your problem.

  • HP4500. Wireless: Wireless HP4500 - prints Test Page but nothing else

    I just bought my first iMac.  I also have a HP (Windows) laptop connected wireless to a HP Officejet 4500 Wireless printer/fax combination for work.  For the new iMac, I loaded the software from the HP drive.  The test page printed beautifully, but nothing prints.  No e-mail, not a word processor file, nothing.  I have tried the uninstall / reboot / reinstall way nothing helps.  I saw the instructions to configure a static IP address, but I'm not sure what could do to my current computer-printer link.  Any suggestions?

    Unfortunately, I am not sure I can reproduce the steps but I finally got my printer to work.  I had to install a new driver from HP and Hello "Multifunction" from Apple.  After several reboots, the printer works now.  Sheesh!

  • HP Photosmart C410a: printing test page but nothing else

    Our printer wasn't working at all, so I uninstalled and reinstalled. He immediately printed the test page, but when I tried to print from Word, it does not print. It works through the sequence, is the impression that it appears, but the page comes out blank. I ran the software troubleshooting and print doctor, but as many say that everything is OK and even once, the test page printed correctly. Help, please?

    Hello

    You stop and restart your PC?  Sometimes, after you have reinstalled the drivers, you must restart your PC.  I had to do recently with our printer at home.

  • HP Officejet 4315 printer prints test page but nothing else

    I have a printer HP Officejet 4315 (Windows 7 Ultimate) can print the test page, but I can't print anything else, this goes through all the motions as it is printing. I've already deleted and reinstalled and went to HP online and updated everything he told me to do. I connect to my laptop to print even if it is a wireless printer. I need help.

    Hello

    1. you remember to make changes to the computer?

    2. do you get an error message when you try to print?

    Follow these methods mentioned below.

     

    Method 1: I suggest you run the printer Troubleshooter and verify.

    http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

    Method 2: Check if the status of the print spooler service is started.

    A print spooler is software that temporarily stores the disk printing hard or in memory until the printer is ready to print.

    Please follow the steps below:

    You must be logged on as administrator to perform these steps.

    a. open administrative tools by clicking the Start button, then Control Panel. In the search box, type Administrative Tools, and then click Administrative Tools.

    b. double-click on Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

    c. right-click on the print spooler service, and then click Properties.

    d. under the tab general , next to Startup type, make sure that Automatic is selected.

    e. If the service is not already running, under Service status, click Startand then click OK. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

    For more information, please see the link below:
    http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

     

    Also see this article for more information on this issue.

    Printer in Windows problems

    http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  • HP 3055 has it says print alignment page, but it is not

    I changed the black ink cartridge, he said: it's printing alignment page, but it doesn't do anything, can someone help me please

    Hi @LaceyLashes,

    Welcome to the HP Forums!

    I noticed that your printer HP Deskjet 3055 said print alignment page but it is not. I'm happy to help with this alignment problem.

    I suggest to go through the steps in this guide to alignment, the alignment Page does not print.

    Thanks for posting and have a nice day!

  • My network printer will display the test in Windows 7 page, but nothing else. It is a Brother MFC-440CN

    My network printer will display the test in Windows 7 page, but nothing else. It is a Brother MFC-440CN

    Hi djmatthewlee

     

    1. How is the printer connected to the network?

    2. is the printer directly connected to the Windows 7 computer?
    3. do you have the updated drivers installed for the printer?

    You can refer to the link below and use the printer troubleshooter. See if it resolves the issues -
    http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

     

    You can also check out the link below:
    http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

     

    I hope this helps.

  • HP Officejet J5780 all-in-one will print test and diagnostics pages but nothing else

    I tried to install my Officejet J5780 on a Windows 7 machine and install CD does not work for Windows 7.  Downloaded the software and drivers from the HP site and since then the printer prints a test page or a page of diagnosis etc but nothing of MS Office or Notepad.

    Any ideas?

    Hello

    I see that you have a problem with the printer. I would say that runs the print and scan the doctor.

  • F4280 printer test page print header "Windows printer test page" and nothing else underneath

    F4280

    The software solution center says printer is "ready".

    When I print the test page by pressing "cancel - start copy color", nothing is printed on the page. The page comes out blank.

    When I print the test page for the Control Panel, it prints the header 'Page of Test printer Windows' and nothing

    under the header.

    Hi, have you tried changing the black cartridge?

  • hp4140 printer problem, unsprung Print print test page but nothing visible

    printer is offline or paused... followed by advice and uncontrolled... pause Print print a test page. then tried to print an e-mail... Print... nothing appears on the page except my homepage e-mail... Page 1 printed only the title and even if she does not print page 1 of 2 page 2

    Try disconecting the printer, uninstall software HP printer via programs & features, restart the PC.

    Download install the full software from HP site features specific to your version of bits of victory, only connect the printer when prompted

    http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4062&LC=en&cc=us&DLC=en&sw_lang=&product=3235310#n191

  • OfficeJet 4615: Officejet 4615 stuck on "Print alignment Page" during the initial installation

    sharpen the printer begins to print page alagin and stuck

    the printer, printing from the computer

    I update the firmware and I do hardreset

    Hello @menybiton ,

    Welcome to the forums of HP.

    I understand that your printer is stuck on the print alignment page.

    I want to help you.

    I would like to remove the ink cartridges.

    Then another hard reset of preforms.

    When the printer asks the missing cartridges, reinstall them.

  • PSC 1510 guard printing alignment pages, won't allow me to use scanner

    My 1510 keeps printing alignment pages (or gives me an error of paper output).  I do not use the color cartridge and haven't for a long time.

    Now when I try to scan a document it says that something is in control of the scanner (probably the alignment process).   I put the fininsh the alignment process page, but he just keeps trying to print an alignment page.

    How can I disable alignment 'characteristic '?  I'm starting to think that the only purpose of this feature is wasting ink HP.

    Hello

    The alignment process designed to ensure optimal print quality, black ink and color are necessary to complete the alignment process, otherwise it runs aground.

    I'm afraid that the model does not circumvent the alignment process, thus getting a new color cartridge essencial in order to complete the alignment process, otherwise the printer will keep pritnign the sheet at the start of the device.

    You can try to print an alignment sheet and press several times the button cancel during the pritning of the page, I think that it can cancel the process then and allow you to scan, however the same will have to be repeated after the printer is restarted.

    Shlomi

  • Want to HP 4500 stuck now to print alignment page that prints nothing

    Want to HP 4500 stuck now to print alignment page that prints nothing

    I was able to talk to the customer service and they said it was a failure of printer and replacing the 4500

  • DeviceHP Photosmart C4400 printer cannot find the printed alignment page

    On the replacement of printer cartridges, the printer is unable to locate the printed alignment page.

    Thanks for the links check, I didn't by this process, here are the answers to your other 2 questions.

    My system is Windows 9...

    No, I don't have an error message on my PC, what I got was a message on printow window saying "alignment page not detected."

    Hello

    1. which version of the operating system is installed on the computer?
    2. you receive an error message?

    Method 1:
    You can see the article provided to solve the problem.
    Troubleshoot aligning the print cartridge
    http://h10010.www1.HP.com/ewfrf/wc/document?cc=us&DLC=en&docName=buu00657&LC=en&product=3655557

    Method 2:
    You can make sure that the latest drivers are updated on the Web site of the manufacturer.
    Download drivers and software - specify product name
    http://h20000.www2.HP.com/bizsupport/TechSupport/ProductList.jsp?lang=en&cc=us&TaskID=135&prodTypeId=18972&prodSeriesId=3655558

    Reference links:
    HP Photosmart C4400, C4500, C4600 and C4700 all-in - One Printer Series - alignment of the print cartridges
    http://bizsupport1.Austin.HP.com/bizsupport/TechSupport/document.jsp?lang=en&cc=us&TaskID=120&prodSeriesId=3776405&prodTypeId=18972&ObjectID=c01369878
  • Photosmart B110c 'Now print alignment page' appears to never.

    Issues related to the:

    How to exit display forever now 'print alignment page?

    How to solve the problem of failure Scanner?

    1. I changed the print head,

    2. I replaced the black ink with authentic cartridge, the yellow ink with compatible cartridge.

    3. After power off, Power ON, appears on the printer: failure of the Scanner, then alignment recommendation and finally 'now print alignment page' and appears to never.

    4. the Solution Center on the computer displays the image below.

    5. from printer Toolbox (in the settings): I could not align the print head, because the failure of scan.

    6. After you clean the print heads and print a Diagnostic Page, I printed the following attachments despite the printer on the SCREEN continues to display the text "now print alignment page":

    7. in spite of the yellow ink level is OK, the yellow is not printed on the page_2 attachment hardware of the printer.

    Please advise to fix the unit.

    Hello

    HP has no guarantee that 3rd party supplies will work in our printers. Looking at the Diagnostics pages it seems that you are not printing cyan or yellow. There are steps you can take to try to retrieve not being able to print individual colors. Please see this link:

    http://support.HP.com/us-en/document/c02045945

    If you cannot print all colors, you run into a problem to scan the alignment page. I think that the question of printing color must be cleared before attempting to align again. How to perform an alignment, please visit this link: http://support.hp.com/us-en/document/c02045945

Maybe you are looking for