Installation of the USB

Similar Questions

• Server does not start after the installation of the USB bootable, ESXi

  Hello

  I installed VMware ESXi 5 on a SSD drive using a bootable USB key, but my server does not automatically start since the SSD after installation. I can boot ESXi in the offered by the BIOS boot menu.

  The startup configuration is perhaps incorrect because during the installation of the USB drive is present, but after the installation, it is not?

  Also has anyone seen this problem?

  Kind regards

  Gijsbert

  Updating the BIOS on the DQ77MK at 49, and you should be able to start - UEFI must never be activated.

• Bootcamp errors during the installation of the USB on iMac mid-2011

  I tried to install Windows 8.1 on my iMac for mid-2011. The problem is that my optical drive is not working properly.

  I created a USB bootable via Bootcamp Assistant on my MBPr and have tried my iMac HARD drive partitioning, using OSX disk utility and disk in recovery mode utility. I tried to leave the space as free and formatted as ExFat and fat.

  At the start of the usb drive and try to install on the bootcamp partition, I get the error that it is a MBR and not on a GPT partition.

  In addition, do not know if it's important, but it is a secondary internal drive. My main drive of OSX is an SSD. I have no problem accessing the drive in question under OSX.

  Help please!

  Mac 2011 (and more) have challenges with no DVD installs due to optical drive problems. Changes to the file info.plist Bootcamp to allow creating install USB works only partially because of start-up problems. Only two solutions that work with a high degree of success are

  1. replace the optical drive, or,

  2 http://forums.macrumors.com/threads/install-a-windows-7-partition-on-mac-osx-wit hout-optical-car-or - usb.1836959 / #post... .

  Following two discussions have some installs successfully, but they usually lead to broken drivers or not functional Apple hardware.

  Re: Bootcamp without optical drive

  Re: Activate Bootcamp install USB for OSX 10.9 * ŒUVRES *.

• Installation of the USB - no scanner detected by the software

  I bought Microtec USB scanner ScanMaker6100 but cannot begin to work with it:)

  Recognize the scanner as a Plug & Play device my PC and install it but the software can't find it.

  I tried to scan on another PC to check and it works so I have problem with my TOSHIBA A60?

  I had send my PC profile to support of Microtec and they suggest the following:
  "your installation of USB needs chipset driver. Currently, he works in "universal". Unmanned correct install cannot USB chipsets support entirely. Normally you have the computer driver MB CD when you buy the computer. »

  My USB controllers in Device Manager are installed like:
  Standard enhanced PCI to USB Host Controller
  Standard openHCD USB host controller
  In devices, I see they are ATI SB200 - USB Controller and ATI SB200 - USB 2.0 Controller.

  I really should reinstall / update my USB driver? How? Where can I get these drivers?

  [Edited by: admin July 16 05 12:34]

  Hello

  I don't think you need to install or update the USB drivers. If the scanner is properly installed and recognized there must be another problem. In my opinion, you should try to use the scanner with another program. As far as I know, you can also use Microsoft word and try to import image from a scanner. If Office is installed on your device, try to import something in the word document.

  Good bye

• Installation of the USB 2.0 extension cable failure, and I am on Windows 7.

  I recently bought a foot 6 ' Male/female' USB extension cable, and it's USB 2.0.
  I bought it because my headphones would not properly work because of a problem in my computer and I thought that an extension can help to stop this problem.
  So, I try to install, but it never does.
  Does anyone know why there are installation problems?
  Also, Yes, the helmet works if I plug it directly on the computer, but with some errors.

  Hi guy,

  I understand that the USB 2.0 extension cable does not work on your computer.

  1. What is Gets the error message when you connect the headphones to the computer?
  2 have you tried plugging the USB cable into another computer?
  3. have you tried it with different USB ports?
  4. What is the brand and model of the computer and a USB headset?
  5. did you of recent changes to the computer?

  Extension cable does not need a driver, this is just a thread. USB cables come in varying degrees of quality. The length of the cable can also be important, because the voltage of the equipment can be reduced by the resistance of the cable. Some devices specify 6 feet or less while others may work correctly with 12 people or more.

  I would suggest trying the following steps and check if it helps.

  Method 1:

  I suggest to run the hardware and devices Troubleshooter and check if it helps.

  Open the hardware and devices Troubleshooter

  
  http://Windows.Microsoft.com/en-in/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2:

  I suggest to open a session on the helmet manufacturer's Web site and install the latest drivers for the headset, if the problem persists.

  You can also check the USB device drivers updated using windows update. See below the help link

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  If the edge of the question persists I'll ask allows you to check the chipset driver updates you find on the manufacturer's website. The chipset drivers normally integrate USB controller drivers as well.

  For more information:

  http://Windows.Microsoft.com/en-us/Windows7/install-a-USB-device

  It will be useful.

  For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• Best installation of the USB driver of practices for non-persistent clones

  Hello

  are there best practices using non-persistent clones and USB driver?

  Client A connects to a linked clone and connects a drive USB flash or something else.

  The installation of the driver is horrible slow on Windows 7:

  • New device found...
  • looking for a driver in driverstore...
  • installing the driver software...

  Tested now and it took more than 8mins.

  After installation, the appliance is ready and can be used. But after disconnecting from the desktop computer updates and each driver installation must be run again at the next connection. We have disabled the Windows updates and specified do not search Windows Update for device driver locations. (Policies-> models-> system administration / Installation of devices-> search order specified for the device driver source locations).

  Clues, why it is so slowly installing drivers and how to prevent the reinstallation of drivers every day

  Thank you and best regards

  Well,.

  We have set. VA was the problem...

  We excluded analyzes the demand for processes drvinst.exe.

  Thank you

• no internet tv after installation of the usb tv tuner!

  I recently bought a HP laptop g62-228 ca series.

  I had set up the center of windows media, (no problem in doing so).

  I was able to open/Internet t.v and view them (especially short video clips / some full episodes, very crisp clear picture.) a lot of the content could not be considered because I reside in the Canada.

  After installing the usb tv tuner and set up for regular tv viewing with my local cable provider. (no problem with that too).

  I could not open/access channels or videos even as I liked be4 I had installed the tv tuner. I can see them in the Guide and even highlight, but I can't open them.

  If someone can help me solve this problem, so I can return to view internet tv. on my laptop?

  I would be very grateful.

  P. S.

  the tuner, I bought says it supports NTSC; ATSC; & clear QAM.

  poonman61

  Hello

  Unfortunately, Internet TV is not available in the Canada.

  David
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Installation of the USB-5680 kills Labview

  Does anyone know why the software that comes with the USB-5680 power meter would cause Labview 8.2 no longer start successfully? I think that the error was: an unrecoverable internal error: lvint.cpp, line 1538.

  Hello LabTech,

  I don't know what is the cause of your problem, but you can try to replace the file ni568x.rc with the attached to this knowledge base article. I found a question where to replace this file corrected exactly the problem that you see. I would like to know if it works and if you have any additional questions.

• Portege R100 - question about the installation of the USB port and Windows problems

  Hello

  I just bought a used Portege R100, but I have some problems. Of course the laptop isn't a CD or DVD, player so I tried an external DVD drive, but it did not work. What kind of device I have to install Windows (not an edition of recovery or anything like that, but a whole new windows on the formatted HARD drive)?

  I also have another problem: whenever I plug a USB device (I tried the DVD drive external and a USB keyboard) when I start the laptop, it seems to hang. At least, I am not able to type anything more; the keyboard of the laptop is dead (the point where the entrance would still be flashing in the BACK platform, but typing. sth on the keyboard isn't doing anything). It is not normal, is it?

  I also tried to get to the BIOS, but I tried various commands (F1 to F12, DEL etc.), but I couldn't access the BIOS. It would be great if someone could tell me the command for it.

  Thanks in advance for the help and sorry for the bad English, I'm not a native speaker :)

  The forum has a search function, but to help you look still these 2 wires:

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=19232
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=23921

  Here you can see that XP installation isn't very easy, but can be done successfully

  as long as you are working in an environment with appropriate back-drivers back, you can use any kind of external (USB or pcmcia) CD player you want

  the bios is accessible by pressing ESC and the Start button

• Installation of the USB Modem problem

  I am trying to install a Telstra 4 G mobile USB modem on a Dell Ultrabook on Windows 7, keep this message ' VB Script run time for custom action ' won't complete installation

  Update your Windows and install the latest update.

  Visit the website of support if your modem and install the latest version of the driver.

  Contact the manufacturer support and discuss this matter with them.

• Installation of the USB-6211 for DA

  I try to use a USB-6211 housing in a very simple system of Visual Studio C++. The final goal is to continuousely output for both channels to 180 samples per second. At this point, I have the following Setup:

  DAQmxErrChk (DAQmxCreateTask("",&taskHandle));
  DAQmxErrChk (DAQmxCreateAOVoltageChan (taskHandle,
  devcmd, //physical channel
  ' ', //name assigned.
  -10.0, the production of //min value
  10.0, output value of //max
  DAQmx_Val_Volts, release //units
  "" scale //custom name
  ));
  DAQmxErrChk (DAQmxCfgSampClkTiming (taskHandle,
  "", //source (default OnboardClock)
  180.0, //rate in the samples per second
  DAQmx_Val_Rising, //active edge
  DAQmx_Val_FiniteSamps, finite number of samples (to change) //a
  samples_to_write //samples to acquire
  ));
  DAQmxErrChk (DAQmxStartTask (taskHandle));

  On the last drive, I get the message:

  Non-bufferered of NI by the equipment operations are not supported for this device and the type of channel. I can't make any sense of it. Any suggestions?

  One of your support staff helped on the phone. It appears as a somewhat obscure command

  DAQmxSetWriteRegenMode (taskHandle, DAQmx_Val_DoNotAllowRegen)

  It takes to get buffering to work properly. It is a command badly documented, and there is no real indication that this is necessary.

• Publish with the installation of the USB SFD 321U/HP floppy drive.

  Can someone help me: I have an old USB SFD 321U/HP floppy drive and would like to find a driver for my Windows 7 to this regulation.

  Install a NEC USB Floppy driver and it will work in Windows 7 64 bit. Worked for me.

  Details are here: http://www.techgeekandmore.com/2009/12/11/hardware-getting-the-iomega-usb-floppy-drive-to-work-with-windows-vista-and-windows-7/

• DeskJet 1510 all-in-One: the installation of the software has failed after the USB connection and remain unfinihed. Work for printer and Scanner

  My PC Dell XPS401L has been updated to Win 7 Win 10.  Then, the HP DJ1510_188 software has been installed.

  The task was ok until the bond required of the Dekjet to the USB port.

  Heard the noise of the acknowledgement of receipt, but there screen remains unchanged despite I wait several minutes. So the installation remains unfinished. However, the printer and scanner are both of the device but are not available important "Solution Center" screen.  I already have the solutions of the error indicated by HP support withot success.

  The system indicates that the problems appear in the USBsetup.exe

  Can someone help on this subject?

  Horacio

  Hi @Horacio_B,

  Thanks for joining the Forums of HP Support for a solution to your installation problem.

  I understand that you try to use an all-in-one printer HP Deskjet 1510 with a PC that has been upgraded from Windows 7 to Windows 10 but does not complete the installation of the USB and the HP Solution Center is not available. I would like to help.

  I would like to start by disconnecting the USB cable and uninstall all software related to printers. Here is a support document which can be used if necessary reference - uninstalling the software of the printer (Windows).

  Once it's over try to use the HP printer installation wizard for installation. This tool will get the software and installation help.

  Please let me know if that solves the problem, or if you need assistance.

  Indeed, if this help you to achieve a solution please click the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!

• installation of El Capitan in a mac by usb, but only using windows to create the USB

  installation of El Capitan in a mac by usb, but only using windows to create the USB

  I'm having a problem to install el capitan on a mac book pro 2009 has changed (dead) to an ssd HARD drive

  I can't find that any information how to do this from a windows machine (now only available) of the old system had the lion as I was told and when trying to install lion line or wireless it says it isn't available now so the machine is stuck without an operating system.

  If you are anywhere near an Apple Store, I would suggest bringing your MBP to and asking to help. For USB, you need to partition and format to allow to boot on a Mac, what Windows can not do. Then either create a bootable installer or install OS X on USB and then copy the installer it, boot from it and run the installer with the SSD as a target.

• Installation of OS 8.6 or 9.2.1 via the USB port on the new world Mac?

  Hallo!

  I have submitted a similar question pertaining to the installation of Mac OS X 10.1 - 10.3 via USB drive in the section "Mac OS X 10.3 and more", so if you saw that please also answer here.

  Here's the situation: I have an iBook Clamshell G3 233 MHz 265 MB SRAM 16 MB of VRAM with 1xUSB port 1.1. I need an operating system installed and the only alternative for Mac OS 8.6/9.2 or OSX 10.1 - 10.3, who is eligible for this machine is PowerPC Linux, which I can only install a copy CLI (Command Line Interface only) of Ubuntu, I strongly prefer not to use. I tried all the methods of creation of the copy USB Installer, I mentioned in paragraph three of this post:install OS X 10.0 - 10.3 from USB on Mac New World? for Mac OS 8.6 and 9.2 disks as well. I have the installation disk OS 8 detail (8.6 green disk with large 8 and photo inside the loop at the bottom) as well as the installation of retail 9.2.1 universal disc (with the big orange 9 on the label), however the CD - R drive is completely shot, as mentioned in the above linked post it can read the disks, but it cannot initialize a boot drive and takes an hour to recognize / + 20 minutes to read a disk sector so the direct installation of disk option is completely.

  While unlike the case in the post above, I can actually get my 9.2.1 installer USB disk copy to start, the copy of 8.6 installer refuses to even be recognized in the boot selection menu (Option at startup) and when I boot the 9.2.1 USB install, I get the notorious "the software of the system at boot drive only functions on the not so copied original media on another drive." message.

  Once again using my CD player - R is out of the question. I did so that the image is "locked" before writing the USB disk, set permissions for image for 'r - r - r -' and formatted the drive as 'Mac OS Standard' (HFS) before writing, and I still got the message. Here are the best: I've used "ResEdit" on a separate Mac OS 9 installation to remove the 'xboo' resource that checks for the media type of the program "/ System/system files", copied the contents of the installation CD to a folder, replaced "/ System/system folders ' with the amended version, creates a new. Master image CDR CD size 665, 8 MB , the size of the original drive, moved the folder with the copy of the installation disk for the installation of OS 9 separate existing, blessed the 'File system' directory, moved back, filled with the contents of the disk image (including the program updated the 'system'), disassembled the new image, 'locked', set its permissions to "r - r - r" - and wrote directly to HFS format USB drive using sudo dd if = «» image path"of = / dev / 'USB drive number' fixed permission on the new USB installation disk, and he successfully started the installer to OS 9.2 modified in menu selection of boot HOWEVER, at the start of the poster Installer always the same message:" the software of the system at boot drive only functions on the original media, don't if copied on another drive. " Even if the function to manage this scenario has been removed, and all permissions are set up correctly.

  I'm doing something wrong? It is even possible in ANY scenario to install Mac OS 8.6 or 9.2.1 installation disk backup direct, or via a USB disk/Flash Drive? Or do I have to buy a new iBook CD - R drive and a Torx T6 screwdriver to replace it just to reinstall Mac OS? Like I said before, we will find more details on the methods tried in the variation of Mac OS X this post link above, so for more information or overview Setup OS X with a USB drive instead of Mac OS just reply to this post. Any help or suggestions are appreciated, and I need an operating system installed on this machine outside the only command line Linux evil. Thank you!

  Mac of this generation will only boot from the internal drive, CD or Firewire.  I just heard rumor a few PPC Macs can boot from USB and it is probably for some OSX version.

  I don't know if target disk Mode or it works for OS9 boot: install 10.4/10.5 on a Mac with a broken / or incompatible optical drive - https://discussions.apple.com/docs/DOC-1020

  Please, do not cross post multiple for one. It is very difficult for people who are trying to help you be able to track what has already been said, especially if we seek the other topic (you do not provide a direct link).