Desktop Compaq Presario has beep and won't start
My Compaq Presario desktop PC makes a sound beep and won't start. The SN # is CNX65112RS. Someone help me please!
That's great. Please mark the thread as solved.
Tags: HP Desktops
Similar Questions
-
Satellite M65 gives two beeps and won't start
Hi all
Need help. Why I turn on my Satellite M65, it gives just 2 beeps and nothing happens.
No display. Tried the Express Media Player too... same thing.Can any body want to say 2 beeps?
Thanks in advance!
A. MoizThanks for pointing this out!
-
don't have the disc anymore so I need to reinstall Windows XP pro sp2 but no disc and there is nothing in the partision
Hello
Thanks for posting the question in the Microsoft Community!
You can't use the computer and reinstall the operating system.
To help you better, we need more information.
1. What do you mean by computer crashed? Do you get any error messages?
2. is the computer, a laptop or desktop?
If you use a laptop, you can contact the computer manufacturer to get an installation disc.
If you need any help or if you encounter problems with Windows in the future, let us know and we would be happy to help you.
-
Alienware x 51 5 beeps and won't turn on.
I got my x 51 for about 3-4 months now and after that I restarted my computer it turned their backs, making 5 intervals of beep and won't start... I tried fixing it all in, I'm really worried because I saw this as a common problem with this system.
I tried this soolution but id does not work: http://en.community.dell.com/support-forums/desktop/f/3514/p/19477069/20241901.aspx
Any help appreciated. Thank you.
I would recommend that you contact Alienware technical support and ask them to guide you through some troubleshooting.
X 51, 5 beeps's graphical associates.
-
How to reset market password on desktop compaq presario 5204
I was given your desktop compaq presario 5204 a couple of years. I have never tried to use it until today so I can't ask the person who gave me the password. When I try to start it I get a screen asking the power on password. How to reset it or remove? I want to donate it to the model railroad Club, I belong to, but it is useless this way.
Disconnect the PC and open the case. Remove the RTC battery (money and the size of a dime), press the power button. Look near the battery for a jumper labelled clr cmos or something close. Remove the jumper and then put back in the same position.
Please post your results.
I couldn't find any information on the motherboard, but it's probably like virtually every other motherboard.
Best regards
ERICO -
Buy the product yesterday, even if Adobe CC reports that the trial period has expired and won't let me in, the purchase was done without problem, any ideas?
Hello
Please see
Connect and disconnect activate Cloud Creative applications
Advanced solutions for connection with Adobe Creative Cloud and Creative Suite applications errors
Concerning
-
I have an old Photoshop CS3 that was installed on a desktop computer that has crashed and is still not bootable. I now have a new office with 10 windows and I installed it and it works. Activation is dimmed, but I can't save. It is said there is no internet connection, which is not correct. What should I do?
Please read https://forums.adobe.com/thread/1499014
-try some steps such as changing browsers and disable your firewall
-also clear the cache of your browser if you start with a fresh browser
-check the file hosts for blocked entries https://forums.adobe.com/thread/1912777
An idea that MAY work to install or run some programs in Windows 10 old... works for some, not for others
- or run as Administrator http://forums.adobe.com/thread/969395 to assign FULL permissions can help... said yet, but sometimes it is necessary for all Adobe programs (this is same as using an administrator account)
-
Original title: Lenovo SL500 Windows Vista crashed with STOP error message and won't start
Hello peoples,
I just installed an iMicro Bluetooth adapter on my computer, and then I wanted to restart my computer. When I turned it on, loading like regular until right after the Vista loading screen, when the Blue Screen of Death (a blue screen with an error on this subject) flashed for about 1/2 second and then restarted my computer. Then he asked me if I wanted to load startup repair or simply start WIndows normally and I chose to start WIndows normally, but it's the same thing, so when the computer is restarted again, I chose the Startup Repair. He said that if I inserted an external device in my computer for me to remove it. But I had no external devices in my computer at the same time! I already pulled the iMicro adapter! So when my computer restarted again, I pressed the button Lenovo Care and charge of Lenovo Rescue and Recovery 4. (This is where I am now, typing away in the Opera browser.) I tried to find help, but could not find anythign useful so far. I installed for many drivers, updates, patches, etc. But none have anything to remove the blue screen of death. Now, after 7 hours, I really frustrated, and this is my last hope! (I don't want to save my hard drive and reinstall, because I paid more than 250 applications and more than 270 free programs on my computer! Of more, more than 350 iPad apps, of which a few are paid! Oh and 700 iBooks!)
Help, please! I'm really desperate right now, and any help would be appreciated!
Thanks in advance!PS I run Windows Vista Home Basic SP2 (I think) on a Lenovo ThinkPad SL500 (NOT SL500c!)
PPS Lenovo all computers have this Lenovo Rescue Recovery 4, which is like an operating system of its own. It has a browser that you can install updates and other things. Right now I use Rescue and Recovery. Thanks again in advance and please answer my question! I had this problem for a week and I'm in school tomorrow! Thanks again!
EDIT: The error message went like this:
A problem has been detected and Windows has shut down to prevent damage to your computer.
If this is the first time you've seen this Stop error screen, restart your computer. If this screen appears again, follow these steps:
Check for viruses on your computer. Remove the hard drives newly installed on the hard disk controllers. Check your hard drive to ensure that it is configured and completed proeprly. Run CHKDSK /F to check for hard drive corruption, and then restart your computer.
Technical information:
STOP: 0X0000007B (0X80599BB0, 0XC0000034, 0X00000000, 0X00000000)
Thanks for the billionth time!
have you tried diving into the blue tooth to the computer with a usb cable before starting the computer u? Sometimes it works
-
my iphone 6s erased and won't start
My Iphone 6s erased and won't start
Hello
Follow the instructions here, including contacting Apple Support or your Genius Bar reservation if necessary:
If your iPhone, iPad or iPod touch won't turn on - Apple Support
-
Another holding down the power button, then by restarting, how should I handle turn on my end 2009 27 "iMac when he crashes on the first blank white screen and won't start?
-
I recently installed an update of Windows for Vista. The appearance has changed and even the Start button is no longer a circle but the former rectangle that says start. How can I get the old look back with on the uninstallation of the update? Thank you
Original title: updates
Hello
It seems that the update was for graphics, as it changed the appearance
If the update is the problem, you will need to remove it or download and reinstall the graphics driver from your computer or the manufacturer of the graphical Web site map.
_________________________________________
Read this information about updates:
Microsoft gives sometimes you updates for the 3rd party hardware: graphics, network cards, etc.
You should only get the latest drivers for them to real hardware manufacturer's website, as Microsoft normally does nor those have the most recent drivers available as Microsoft relies of the 3rd party hardware Manufactuer to provide.
But unfortunately, the only way to know which is the update of the problem is to install them one by one, until you find the 'wrong' for your installation.
You can do a system restore to get back until it has been installed (which is NOT the best way to remove an update) or follow this method:
'Remove an update'
http://Windows.Microsoft.com/en-us/Windows-Vista/remove-an-update
When you have found the issue of update of the list of updates which is presented > then right click on the update problem > select Hide update > and it will not be available to you once again
"How to hide or show an update of Windows Vista"
http://www.Vistax64.com/tutorials/72491-Windows-Update.html
"How to hide or restore the updates of Windows hidden in Windows 7 and Windows 8"
http://www.SevenForums.com/tutorials/24376-Windows-Update-hide-restore-hidden-updates.html
_____________________________________________
Here's how to chanage update settings, if you think it is necessary to:
"Understanding Windows Update and Extras in Windows Vista and Windows 7.
http://www.bleepingcomputer.com/tutorials/Windows-Vista-updates-and-extras/
Or the other of these two update settings will give you the chance to see what you want to install through Windows updates;
Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.
Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.
But remember you normally only have problems with hardware 3rd party drivers. Other updates are to improve the Performance and security of your system
See you soon.
-
Compaq Presario SR2010NX beep code error starting: longbeeppausecontinuinglongbeepspausebetweeneach
Hello. My Compaq Presario Desktop PC SR2010NX of 2006 began just not start. It gives me a sound code of long beeps that accompany pause after each beep and continue indefinitely. I have tried convenience cheques, and it looks as if it was the 'memory '. My question, FEI's memory, what cards are hardware compatible with my PC. I had a breakdown. to install a new set of 2 GB cards in July - and I had technicians immediately reinstall my old 2 cards (issued factory) replacement cards they have advised me to buy are not compatible, and when I went to pick up my computer, the computer would not start. I have askede to reinstall my old cards and the computer booted suceesfully, and I left the store! I am sure that I do not know what new products could be compatible with my old PC. I thhink 4 GB is too myuch for my computer, and he couldn't get half that - but what brand should be like new hardwrae? I wasn't expecting my old cards fail when they were resettled - three months since the change of memory attempt - thre months they started normally. They have been re-hurriedly harnessed and dismissed the case, and then I left the store. (The tech threatedned me with fear of "motherboard failure", which just made get the computer and leave immediately. The old cards cannot have been relocated safely. I'm taking it - but I will not be pushed around. Of course - as old as mine PC would gradually motherboard failure. Until it fails. It was the memory card, but what woud cards my PC take that would be accepted as new hardware and allow my PC to boot up normally, if it is the cards and not yet the motherboard?
I have now read the post with indicator on the upgrade memory. It was very useful, and I wrote notes for the Presario.
It says, maximusmis 2 GB to 1 GB cards/no stamped with the form of the data of motherboard page.
It is divided between 2 cards 512 MB factory. It has only 2 slots.
Thank you. My Compaq desktop computer has grown on me. I got Vista bfore and I didn't know what I think. If it can be repaired, I think 8 years (purchase date 4 November 2006) were fun for the low-end model. It was a good choice, and I have never regretted buying at what cost. It was better than expected.
I haven't used my Compaq Presario continually over the past eight years - that's why it lasted so long! Dud ut do work, however. I had retirement is put online last year
I liked HP Photosmart first 6.5 photo editing. I liked Wordpad. Mechanically, it was scientifically. The material began to go when the built-in CD/DVD internal drive has failed. I bought and had a replacement (DVD player (cd) internal HP) installed in July 2014.
The new internal DVD writer HP compatible service pack XP? I have SP2) - I don't think it's about compatible new material. This caused unable to start new businesses after three months? New feature of device recognistion and old motherboard? Don't know? (short circuit)? I left the old CD/DVD recorder factory in its case - it's there and the springs are working to open and close the casing and check it / A short? Don't know anything about electric
Another point, when the original memory card 512 MB on factory 2 cards have been resettled, he was press-technicians to get the computer to boot - so the computer's case has been closed. (I took the PC on their part awqay as fast it was closed upward). I thought safe in maintaining clips? Maybe not securely harnessed. Could also be from the old factory of 512 memory cards in each clip spare wedge - to alternate which card and which support clip. I have not tried this or re-cutting to the place of repair. (I do not have any technical installation and not have ny contact danger here - I do not touch the computer). It is the matter of repair - these people in a hurry, they sell - they tell you something will work, they overtest, they overdiagnose - they push you autour-yyou never recover your computer to use as is - it is disturbing to go, if you are not a consumer savvy or technical.
May not be able to take new material old = change motherboard in chipsets, etcs. features.
Ialso had an error saying years only. IPC Port would not work. (. COMI is the base model for the CPA called Palm Zire Hotsync Manager. I don't think the Palm Zire software uninstalled iI, and the message is a (!) origin unknown error message is:. COMI, has failed to initialize. It's a pop-up error message appeared during the startup process. The repair people off the message. The boot has been at once - disconnect - the plugin twice and electric start. It was based on the plug in the socket, removed and reconnected before the start =. Technicians tried to solve this problem, but it is not important from my point of view. All of those, cumulatively, could be symptoms of a hardware change progressive until the end of the use of PC - they are all could be chips card mother falling out or something there (the CD player, the.) Port COMI - don't know about the real, even if start program - which can only be that.)
I tried the power reset function discussed in the Troubleshooting Online Web pages - 5 seconds to reset, / 15 seconds to reset - power off (unplugged) and hold the power button / stop without plug-in for 5 or 15 seconds (depends on the Web page of the online manual!) Once, after an attempt to reset of fifteen seconds, the computer has no beep, and he almost made a second rumble noise - but then no change afterwards. The redonnee start-up sound code beep after that the computer was turned off and then restarted again.
PC is sitting in his corner. I don't want someone break while I think about what to do. He's going nowhere right now.
This is the first time, it would not start. I am a bit worried and disappointed, but, I know that my PC is old, and one day, it will fail to work. That is the reality. If it fi fixable, I'm interested to hear about the fit-it. Thanks again.
Hello @lliil,
I read what you posted and it seems that you have a hardware problem with your computer. The only thing I can do for you is to provide you with the HP support document: BIOS Beep Codes, which will help you to correctly identify what's wrong with your computer. Given the age of the computer apart from this if you want to know if it can be fixed, I recommend do you get into a local computer repair shop and let them take a look.
I hope I helped. Thanks for posting on the HP Forums. Have a great day!
-
Hi all!
I have a Compaq Presario C731TU I absolutely need to upgrade its opportunities top of page. I discovered that he could run processor family Intel core 2 duo, and celeron family, that sounds really good!
Then consulted taken PPGA478 processors on the site of intel with their processor feature filter (http://ark.intel.com/search/advanced?s=t&FamilyText=Legacy%20Intel%C2%AE%20Core%E2%84%A22%20Processo...) the best option seems to be Intel® Core™ 2 Duo Processor T9500 (2.60 GHz, 800 MHz FSB, 6 MB Cache).
My question is:
Is there another cpu option better? Inside of a forum, I read that it can withstand up to Intel C2D T9xxx family but after T9500 (e.g. T9600 or T9900) taking turns into PGA478 and not PPGA478. What is the difference between PPGA478 and PGA478? are they the same or not?
Are there limits on the CPU with the BIOS upgrade? (mine is upgrated to F34 which should be the latest version)
About RAM: this laptop should work max 2 GB of ram but in fact I use it with 3 GB of ram (with these config.: 1 GB on the inner slot and 2 GB on the external, the inverse solution does not work, can not guess why), but someone "found a way" to use the 2 banks of 2 GB 4 GB total (and if according with this http://www.intel.com/Assets/PDF/specupdate/316274.pdf - pag. 19 - should be quite possible) , what ram 2x2gb modules can be accepted if? Help me = S
Thank you very much in advance!
I opened the laptop and the chipset inside the computer, wirtten there is an INTEL GL 960 who should manage only 553 mhz FSB... But... I installed inside, as the core 2 duo t9300, which has 800 Mhz FSB and it is fully functional in frequency from 800 Mhz to FSB. Really good news =)
AIDA 64 tool (former Everest) shows the FSB of GL960 chipset can run on 533, 667 and 800 Mhz frequency.
-
I have a Compaq Presario V5000 Laptop and have lost the files in c: drive recovery...
I bought this computer laptop opportunity (Compaq Presario V5000), complete with the XP Home installed, which also had the original
Preload / recovery facilties installed on the c: drive. and the image of preload on the partition fat32 D:
I discovered that there are several users also installed, so I made a recovery sys, who has a real fine, but users were still there... So, I decided to format the c: drive, reinstall XP! Too late! I realized that the recovery system would be too lost... Now I have the D: (recocery Image), but no way to activate the preload process, which would format and reinstall the original version of XP complete with intact all of the initial recovery of files...
This left me with this delema, as I DO not want to restore my laptop to original factory preload State...
seaviewboy (Robert)
Hello
You may need to contact the manufacturer of the computer for help on this issue. You can also order a recovery disc.
http://h30434.www3.HP.com/PSG/
http://welcome.HP.com/country/us/en/contact_us.html -
I have a Compaq Presario V6000 Widescreen and I can't find the video driver just for this computer
I can find the video driver for my Compaq Presario V6000 Widescreen
Serial number: {Private Information Removed}
There are 4 computer V6000 but I don't know which one should I use.
I use my serial number and the model name and the PIN code and still cannot very well the video driver. can someone tell me were fined the pilot to be used on window XP
Maybe you are looking for
-
I forgot to turn on the firewall
After updating Adobe Flash, I forgot to re - activate my firewall. I checked it after noticing that a number of Web sites, I have visited not appeared in my web browser (Firefox). It was late, so I've re-enabled the firewall, turn off my iMac and wen
-
Scrapbook is more visible to me and click Open. When I watch my modules, scrapbook is visible and I have an option to remove. Therefore here... but I can't. Where should I look?
-
Satellite U500 - black screen after inactivity
Hi all, I have a new problem on my U500. My computer would 'lock' itself and would come to a black screen and nothing would respond. I see that the power light is still on but nothing. No screen saver is on. I have to hold the close button. This has
-
Office 2007... Vista 64-bit. Have not tried to install.
-
The user interface for composing
How to create UI to compose even attachment (QML) pic Thank you all.