Desktop goes down with different COLOR SCREEN ERROR, PATTERNS of ERRORS

Similar Questions

• Intermittently, he goes down with a black screen provides the following information: Boot from CD

  I have a Dell Inspiron 530 running with Windows Vista.  Intermittently, he falls down with a black screen provides the following information:

  Boot from CD

  Client MAC addr: 00 ID 09 88 CE 06

  GUID FFFFFFFF FFFF FFFF FFFF FFFFFFFFFFFF DHCP *.

  PXE - E53: no boot file received

  PXE - M0F leaving Intel Boot Agent

  No available boot device - retype press to try

  To the point where I have indicated the asterisk above, it has a slash which rotates in a circular motion.

  My thought is that it's either the Windows code is corrupted or is a hardware failure.  While I am not positive, I feel that it occurs when Internet Explorer is used.   System Restore is not enabled on this computer, so this isn't an option.  Can someone help me understand this means and how I could fix this?  I know that will later Windows version can solve it, but this isn't the answer I'm looking for.  Thank you

  Attempt to initialize the network is not a 'possible', it is certain that your PC is doing exactly this depending on your BIOS settings. In addition, she tries the network initialization after already trying to start on an optical disc. The two attempts at device boot doesn't have, in all likelihood after having already failed the boot from the hard drive. There is no message to indicate than an attempt to boot to the hard drive, or he leaves the screen too fast to see you or you did not save it in your original post.

  My advice on the diagnosis is based on the studied the real model of your PC, not generic advice for all Dell PC with Vista installed.

  1. Your computer has already finished POST (Power O n Self TEST) otherwise you wouldn't see any attempt to start at all.
  2. You've already provided specific error messages.
  3. I have already advised the best and most approriate diagnostics for your PC.
  4. Your PC will not start in any mode if it becomes a default 'hard', rather than the intermittent fault means your original message. Start in any mode, you can and make a backup as soon as possible.
  5. Unless these recent changes include adjustments to the BIOS settings, they are irrelevant, that he is a boot failure which can be caused by anything done under Vista.
  6. Removing the external devices is never a bad step of troubleshooting if you encounter problems. I doubt it will help in this instance, but it will not hurt to try, especially if they are peripheral bootable.
  7. Startup Repair will not solve a hardware problem (by far the most likley scenario).
  8. System Restore is not usable unless you can actually start to Vista and it's never going to treat problems of material.
  9. IMO, this is not a software issue. See also point 4.
  10. If you have a hard drive failure, it is not recommended to try to reinstall the operating system. First of all prove that the hard drive is OK as advised before trying to re-setup. In addition, if you can, back up your data before reinstalling the operating system. In all likelihood, that's what you have to do but for a hard drive replacement.

  I repeat that a failing or failed hard drive is the most likely scenario. Other more distant possibilities include

  • A failed or failing disk controller (almost certainly on the motherboard)
  • Boot from the hard drive is disabled in the BIOS (highly unlikely if this anomaly is intermittent)
  • Some sort of weird for the failure of the BIOS
  • Option 3 mentioned in the previous post (unlikely unless your PC has been internally inspected/modified or subject to vibration displacement/hitting more/remove etc..)

• Why you do not have your products with different colors? compatible with the colors of the iPhone or the iPad? Example: Gold Earpods, silver, BLACK and Rose Gold.

  Why you do not have your products with different colors? compatible with the colors of the iPhone or the iPad? Example: Gold Earpods, silver, BLACK and Rose Gold.

  You say Apple your wishes on the link below.

  http://www.Apple.com/feedback/

• Graph XY overlay multi field with different colors

  Hello

  I want to make a cyclic XY one track loop and plot the graph for each cycle in different colors.

  I want a field like XYgraph2 but with different colors and probably even without this line of tracing. How can I change my schema?

  Thank you for your time and your efforts.

  KOUYATÉ

  Try this.

• Interactive report - with different colors column header

  Hi all

  I use the Application Express 4.0.2.00.07.

  Theme: 2 blue Builder

  I have the zoom before interactive reports in a page, in do I have to display each header of reports with different colors instead of having the same blue color given by theme for all reports.

  Also I need this color change of header for this page only, not for the entire application.

  can someone offer me please how to do this?

  Thank you for your help in advance.

  Kind regards

  Santini.

  Add a static region ID in each region report and include a stylesheet like the following in the HTML Header page:

  When the report 1, report 2, etc. are the static region ID.

• Impossible to use two af:tables with different colors (skins)?

  Im trying to configure the Siebel self-service application and customize the counting. I have a few problems, because I need to show two af:tables on the same page, but with different colors. One with black background and white text (header and body) and the other with white background and black text. I tried to use styleClass: are, but the css settings defined for the table of the af are the substitution of those mentioned in the style sheets.
  
  Anyone with an idea how to solve this problem?
  
  Thank you
  / Jon-Erik

  Hello

  If the styleClass name is table1 then the skin selector would be something like

  .Table1 af | table

  mul afTable.af: table

  I don't see how this can be overloaded. If you hypothesis is that the style class reference must be to a definition of CSS on the page, then indeed, it does not. The styleClass name is an identifier of type named for the skin component and is used to describe more the component skin

  Frank

• Interpolation of shape with different colors of lines

  Hello, I just created a simple shape tween, and I am very satisfied with the appearance of the interpolation. However, the borders of the shape are two different colors. On the first and last frame of the tween, the colors are correct, however in the frames between, all lines are the same color, which in fact stand out from the rest of the form. Is there a way to stop flash to change the colors of the Tween? It has been designed using the online tool.

  put the border, then fill in the different layers.  convert each symbol if you want to use interpolations of movement on each or if you don't want to interpolate the border, you should not convert.

• BarSeries with different colors

  How can I set different colors for my BarSeries who will rely on another table of data?
  
  Something like:
  first of all bar - = red = blue = yellow = green ==
  2nd bar - = blue = green = grey =.
  3 bar - = red = yellow = gray =.
  
  on my yAxis is date by month and on my xAxis is the number of tasks.
  different colors are for names:
  Name1 = Red
  Name2 = blue
  Name3 = yellow
  Name4 = Green
  Name5 = gray
  ... Name = everythink color...
  
  given that the list of names is dynamic, I can't define a specific bar for each series. My barchart type is already set to stacked and it then displays the total number of jobs per month.
  
  Any help, tnx!
  

  OK thanks for the reply, I finally found the answer here:
  Create graphics in ActionScript

• Creation of PDF of PDFMaker Word 2016 goes down with the error PDMEngine.dll

  Hello, I had

  Office 2016 32 bit on 64 bit W7 and Acrobat DC Standard recently updated.

  I have this crash whenever I try to "create PDF"of PDFMaker addin on the word. "

  TEMP folder is empty and I repaired office and acrobat.

  I had to purchase this acrobat DC version, because the one I had (acrobat X) was not compatible with office 2016

  Help, please

  Hi xabiru_ ,

  Please provide the exact point version of the software installed on your system. Also check if it is there any update available for the software after crossing "" help > check updates "»

  Also refer to this article:- https://helpx.adobe.com/acrobat/kb/PDFMaker-crashes-office2016-office365.html

  Kind regards

  Christian

• Pavilion dv9535nr - monitor shows lines with different colors, and then turns into blackout curtains

  I have a strong desire to help my father who is a sailor searching for an answer regarding his problem with his laptop.  His laptop is very important to him, because he uses this fact to his work, particularly in the preparation of reports and other kinds of things. They do not have Internet connection that's why I'm the one who send right now for this message.

  The problem is that the laptop has no display after having turned it on, it just show a few colored lines, and then after a while, the monitor is totally blackout curtains.  My father tried to use his laptop, even if it does not display, he provided his password and had pressed enter and heard the sound of the operating system. The sound he heard was similar to the sound at the start of the BONE.  He even tried to close the session blindly and he could again hear the sound you hear when you connect on a Vista operating system.

  I would like to ask if the problem is on the LCD screen, video card or even with the software? If it's a hardware problem, could you tell if my father could buy the piece of hardware he'd be able to fix his laptop?

  If you have ideas to share, I'd be very happy.  Thank you in advance.

  OK, I'll post my message here.  Thanks for the tips! Have a great day!

• Pavilion m9340f crashes with a blue screen error. Windows 7 Ultimate 64

  Running Windows 7 on my computer of Pavilion m9340f, I lived occasional crashes 'blue screen '. To try to solve the problem, I inserted carelessly the original Windows 7 DVD in the drive of the computer, thought could be used to repair the problem, or "reboot" of the software. What has resulted, it was that the newly installed Windows 7 was found to be "not a copy genuine Windows" and would not allow me to use the features of the operating system.  I was then told to format the hard drive of my computer, I did, and I did a clean install of Windows 7 Ultimate, which now has been accepted as authentic. Initially, the computer seems to work normally, but BlueScreen crashes became more frequent, occurring almost every time I used the computer. I run HP Diagnostics that shows no problem. I have eliminated most of the software programs that could cause a conflict. I am running, currently: Norton 360 first Edition, Microsoft Word 2010 and Google Chrome - one of them could be the cause of the conflict? Please advise on possible solutions. Thank you!

  Steve N.

  Hi Steve,.

  Try to delete (see below) everything except a strip of Ram in the computer and then see if it will work normally.  If this is the case, add another stick in and try again - as soon as the blue screen events happen, you will know that the last stick of ram you have installed is the problem.

  If the PC bluescreens yet with one stick of RAM, try the same stick, but in a different location - if it works OK now, this may indicate that the location of memory has failed.  If there's some bluescreens, remove the Ram and try the process above with a different memory module.

  Guide for the addition or deletion of Ram.

  Let me know the result of this.

  Kind regards

  DP - K

• How to keep the chart with different colors when adding new data

  Hi, please help me.

  I want to compare my first plot the data (trace of legend) with my following data in the graph of the plot. my program didn't work it just add new field data and color for the next data has not changed.

  What's a matter of signal conditioning? Please, click on Options, and to request the removal of moderator for the jury of LabVIEW.

• Please help me with this blue screen error... He produced almost every time that I do something on the Internet (IRQL_NOT_LESS_OR_EQUAL)?

  This blue screen to me before had taken place. I have read many forums and got to know upgrade drivers Ethernet and when I looked inside, the engines were updated 2012.I their and thought has been fixed and now its new annoys me when I am back on internet especially download with bit torrent or almost... If you please examine it. I use Windows 7.
  The details of everything that was running is here in this txt file in Sky Drive:

  https://SkyDrive.live.com/?CID=fef1a77b65bcf083&ID=FEF1A77B65BCF083! 107 & authkey =! AAMS14vozxJ_cJc

  TX

  These were not conclusive.  Run the Driver Verifier to identify the real cause.

  
  

  If you're overclocking (pushing components beyond their design) return you to default at least until the crash is resolved. If you don't know what it is that you're probably not overclocking.

  Driver Verifier (for full instructions, see our wiki here)

  Co-written by JMH3143

  .

• CC of Dreamweaver server goes down with PHP "include".

  I often use php "include_once()" or "require_once()" to incorporate elements such as headers or navigation within my site - so I don't have to edit this central file and turns through my website.

  I started only recently using Dreamweaver CC (2015), after having been a GoLive user since a long time.

  So I am just learning the tricks of the trade with DW (although I used older versions in the past, CS4) by recreating one of my smaller sites - everything worked fine until I added a side menu that I wear using php "include_once()". Now, every time I try and do anything in Live view mode (or simply display it there) - which is connected via a server due to the use of php - I get the rotation of death very much beach ball and have to force quit.

  Any thoughts or ideas would be welcome!

  (I'm on Mac OS 10.11.5, Dreamweaver CC (2015) - last updated)

  Thank you, David. I'm sure that it is set up very well - but I will check it with this link - cheers.

  At the same time - I'm a little embarrassed to say - I made a discovery (should have done so before, but only now isolate pieces of code to see if there is a conflict)... uh, there's a spare part

  tag in the "include" file Took me forever, out and back into various pieces of code... but in the end he cut down to that

  tag seems to have solved the problem.

  It has in fact closed an opening

  Tag, but it had a few links separated by
  Editor of tags in the meantime. Don't know if there is some conflicts I do not understand.

  Thanks for all your suggestions - appreciated!

• the list widget with different colors for each item in the list?

  I'll add a widget list to my interactive color wheel:
  
  * http://r0k.us/graphics/SIHwheel.html
  
  It is an old applet, first published in 1998 and older than Swing.
  
  The list contains the names of color 1 567 which he knows the color values. I want the background color to each element to be one of the named color. The forefront color name text will be white or black, chosen for readability to her background. Basically, I'm hoping to accomplish what the name of this color page did with its list widget HTML-form:
  
  * http://chir.ag/projects/name-that-color/
  
  I studied the java.awt.list document:
  
  * http://download.oracle.com/javase/1.4.2/docs/api/java/awt/List.html
  
  SetBackground() and setForeground() methods are implemented, but they seem to apply only to the list as a whole. As far as I know, it seems there is no access to list items themselves as components. I hope that I am just missing what is obvious.
  
  -Rich

  What you want to do can be easily implemented on a JList swing, with the help of a custom converter. I would advise therefore to rewrite your applet in the swing, then use a JList. That way you can skip JUnit is studying just to force your applet awt to do something of awt was neither designed for and focus on swing of things GUI. Below is an example of how you can implement your JList:

  import java.awt.*;
  import java.math.BigInteger;
  import java.util.Arrays;
  import java.util.Comparator;
  
  import javax.swing.*;
  import javax.swing.event.ListSelectionEvent;
  import javax.swing.event.ListSelectionListener;
  
  public class ColorList {
  
      public static void main(String[] args) {
       SwingUtilities.invokeLater(new Runnable() {
  
           @Override
           public void run() {
            new ColorList().createGUI();
           }
       });
      }
  
      private void createGUI() {
       String[][] array = getArray();
       // sort the array as you wish
       Arrays.sort(array, new Comparator() {
  
           @Override
           public int compare(String[] o1, String[] o2) {
            return o1[1].compareTo(o2[1]);
           }
  
       });
       // create the JList
       final JList list = new JList(array);
       // set some adequate renderer
       list.setCellRenderer(new DefaultListCellRenderer() {
           private static final long serialVersionUID = 1L;
  
           @Override
           public Component getListCellRendererComponent(JList list,
                Object value, int index, boolean isSelected,
                boolean cellHasFocus) {
            DefaultListCellRenderer renderer = (DefaultListCellRenderer) super
                 .getListCellRendererComponent(list, value, index,
                      isSelected, cellHasFocus);
            renderer.setText(((String[]) value)[1]);
            int color = new BigInteger(((String[]) value)[0], 16)
                 .intValue();
            renderer.setBackground(new Color(color));
            renderer.setForeground(new Color(0xFFFFFFFF ^ color));
            return renderer;
           }
       });
       final JLabel demoLabel = new JLabel(
            "Display this text in the selected color", JLabel.CENTER);
       list.addListSelectionListener(new ListSelectionListener() {
  
           @Override
           public void valueChanged(ListSelectionEvent e) {
            String[] selected = (String[]) list.getSelectedValue();
            demoLabel.setForeground(new Color(new BigInteger(selected[0],
                 16).intValue()));
           }
       });
  
       JFrame frame = new JFrame("ColorList");
       frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
       frame.add(new JScrollPane(list), BorderLayout.LINE_START);
       frame.add(demoLabel, BorderLayout.CENTER);
       frame.pack();
       frame.setLocationRelativeTo(null);
       frame.setVisible(true);
      }
  
      private String[][] getArray() {
       return new String[][] {
  
       { "000000", "Black" },
  
       { "000080", "Navy Blue" },
  
       { "0000C8", "Dark Blue" },
  
       { "0000FF", "Blue" },
  
       { "000741", "Stratos" },
  
       { "00FF00", "Green" },
  
       { "FF0000", "Red" },
  
       { "FFFFF0", "Ivory" },
  
       { "FFFFFF", "White" }
  
       };
  
      }
  
  }
  

  Piet