Desktop HP Pavilion 500-374na: the upgrade of processor power and power

Hi man, im planning on upgrading my food processor and the power tomorrow and just need to check that my choice is compatible?

I have a HP Pavilllion 500-374na desktop pc, with a processor Intel Core i3 4150 and a power supply 180w.

My scheduled updates are - image processor intel core i7-4790 3.6 Hz 8 mb L3 cache and corsair 500w PSU.

The list according to the upgrade of processor hp provide it states that it is compatible with my motherboard, but just dream to double check before I commit.

So, any help would be great guys?

Hello

You should not need a power supply upgrade. But just in case, open your PC and display the information on the label of power such as the amperage supply total wattage and 12v.

Thanks for posting on the forum.

Tags: HP Desktops

Similar Questions

  • HP Pavilion 500-550nv: the upgrade of power

    Hello. I have HP Pavilion 500-550nv (in which case is microtour format) and want to upgrade my HP power which is only 180 W!

    I want to know what brand of food is supported for my pc model (hp pavilion 500-550nv) and how much wattage recommended (up to 600? up to 650?). Which is the recommended limit of power supply of power for my HP?

    I'm waiting for your answers. Thank you

    Hello @jeandoumpier,

    Thank you for visiting the Forums from the HP Support! The forums are a great place where you can find solutions for your problems, with the help of the community!

    I read your post on food and wanted to help you!  I understand that you are concerned about upgrade options.

    You should be able to improve the power you want.  The Office should take but a lot of power, it must, food that is installed.  Just check that the power supply to use, firmly enters the tower.  Based on the Specifications of the product, you can find the dimensions tour here:

    • Height: 36.7 cm (14,48 in.) unpacked

    • Width: 17.5 cm (6.91 inches) unpacked

    • Length: 38.9 cm (15.35 inches) unpacked

    Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

    Have a great day!

  • Pavilion p6-2070sc: the upgrade of processor on a p6-2070sc

    According to the page of specifications of product for my Pavilion p6 2070sc (), I can upgrade the processor.

    I have 3 questions then:

    1: if I want to switch to an i7 processor, this one would agree: http://www.proshop.dk/CPU/Intel-Core-i7-2600-Sandy-Bridge-Tray-2287663.html

    2: can I do the upgrade myself?

    3: can I also buy this thermal grease: http://www.proshop.dk/Systemtilbehoer-(koelepasta-mv.) /Danamics-Koelepasta-1%2C5-Gram-2253904.html

    Thank you for your help,

    Carsten.

    Hello

    I don't plan on specific issues.  You will need to reuse the existing heatsink.

    Review a couple of uTube videos of Intel i7-2600 installation so that you get the feel of what you need to do.

    I suggest that you plan to install latest BIOS update for your PC and your PC stable before you proceed with the replacement of the processor.  It could not hurt to run diagnostics to make sure that your PC hardware is stable.

    If you experience problems after installing, then try to clear the CMOS memory.

  • HP Pavilion 500-164: the upgrade of the graphics card and power supply on a HP Pavilion 500-164

    I'll be upgrading my HP pavilions integrated HD graphics 8570 D a STRIX ASUS GeForce GTX overclocked 2 GB DDR5 128 - bit DisplayPort HDMI 1 750TI. 4 a/DVI-I graphics card. With that I also improve my diet to a Thermaltake TR2 500W 240 pins power power TR-500. I was wondering if it of ok to do on the computer and will not damage it. It is extra steps when I install these. Initially, I got the PC with windows 8 but have upgraded to windows 10.

    Hello

    If the ASUS 750 TI requires a 6-pin auxiliary power connector and your computer is running a version of HP 8 BIOS then you should be OK.  Open your PC and measure to make sure that graphics card fits.  In addition, open the command RUN and enter: MSINFO32

    Your computer is running a version of HP 8 BIOS?  If so, and if it is possible to install the graphics card then go ahead. Find out what the return policy is before you buy.

    Thanks for posting on the forum.

  • HP Pavilion p7-1003w: the upgrade of processor p7-1003w Six-Core AM3 AMD Phenom II X 6 10xxT error

    I am trying to upgrade my desktop computer the original PCU to a processor of Six Core AMD Phenom II X 6 1055 t. When I installed it the computer started with 'unsupported CPU error.

    The specifications for the p7-1003w on the HP site claims that the AMD Phenom II X 6 is System1. Help please. And thank you

    Cluddeni50, welcome to the forum.

    Here are taken processors supported:

    Max TDP: 95W

  • Pavilion s5-1015uk: the upgrade of processor

    Tried to upgrade the CPU on my desk of slimline s5-1015uk Pavilion to an i7 - 2600K quad core CPU. The HP support document has stated that the Cupertino would a QuadCore i7-2xxx - but the pc gave the message that island cpu is not recognized and set off. Someone knows why?

    That's because an Intel Core i7 2xxx option isted in the motherboard specifications published includes not a processor Intel Core i7 - 2600K or 2600M 2600 s

    The designation of three xxx represents 'don't care' electronic terminology n numbers and anything else a added to them.

    A processor Intel Core i7 2600 CPU would have been recognized, but not, as you now know, an Intel Core i7 - 2600K processor.

  • Desktop HP Pavilion 500-223w: upgrading my video card

    I have a desktop HP Pavilion 500-223w with integrated graphics card intel. I want to install a 3d ready geforce graphics card in the pci expansion slot. How can I disable the integrated video card? I went to the bios Setup, but has not seen something on the video card.

    Hello:

    When you add a video card in this model, the integrated graphics card is automatically disabled as it is on most of today's desktop PCs.

    If your PC came with the factory W10, you need to change two other BIOS settings.

    See this guide for what settings change... This applies to every PC comes with Windows 8 or newer installed.

    http://support.HP.com/us-en/document/c03653200/

  • CARD READER USB FOR DESKTOP HP PAVILION 500 - C60?

    I have a new 500 - C60 HP Pavilion desktop computer, but the front card reader does not accept the largest flash Compact Flash (CF) card.  I have an old USB multi-card with four different card slots, which accepts the card see  Would this setting work satisfactorly?

    Thank you

    shamrock838

    Hello @shamrock838,

    I understand that your desktop HP Pavilion 500 - c60 PC does not support the biggest Compact Flash Memory Card and you are curious as to whether or not you can install an USB multicard Reader which accepts the memory card see First of all, you have reason 7 - in1 media card reader did it installed does not supported CF memory card, but it supports the following cards:

    • Digital safe™ (SD)
    • Secure Digital High Capacity (SDHC)
    • SDXC
    • Memory Stick
    • Memory Stick Select
    • Memory Stick PRO
    • Memory Stick MagicGate

    I don't see why you can't connect the 4 - in1 USB multicard reader you have. Until the operating system detects and installs, you should be fine.

    I hope that I have answered your question to your satisfaction. Thanks for posting on the HP Forums. Have a great day!

  • HP Pavilion 500-242ea: Ram upgrade

    Hi I have a desktop computer Pavilion 500 - 242ea 64-bit with 6 GB of ram installed 1 x 2 gb Hynix/Hyundai 1600 mhz and 1 x 4 gb Samsung 1600 mhz.

    I would like to increase my ram by an additional 8 GB with a 2 x 4 GB - 1600 mhz cards in empty slots, all first is it possible and secondly what do you sugest?

    My motherboard has four 240-pin ddr dimm sockets plug say this upgrade may be: -.

    PC3-10600 (DDR3-1333) or

    PC3-12800 (DDR3-1600) or

    PC3-14400 (DDR3-1866),

    32 GB unbuffered memory total

    I look forward to your response.

    You can add memory for each vacant home.   I would add two DDR3 2048 MB PC3-12800 (800 mhz) to this system.  But if you wanted to add two 4096 modules, I see no problem.

  • Suggestions and Questions about the upgrade my Hardrive Mac and Ram.

    Hi This is my first time asking something in the forums. (At least I think) Well anyway, I got the Macbook Pro Mid 2012 13 "with the retina also runs the OS El captain. I do computer for school and sometimes animation video editing and ive noticed some performance as my projects get bigger and bigger issues. I want to improve my mac, but I'm not very tech savy and don't want to do something useless, so I had a few questions, I wanted to ask you.

    Do I need for my hard drive and my Ram?

    What effect will the upgrade of my Ram and what effect will be upgrading my hard drive with an SSD?

    I saw this SSD online and thought of novice opion that sounds get Id more bang for my buck (link) with her. Is this good? What more to kill? WiIll it still works? Could you suggest some other good affordable options?

    My next question if I decide to upgrade my Ram can provide you with some good affordable links to buy of new RAM sticks, is also 8 GB, the best he can do?

    My next question I watched a few videos online and by installing the updates level looks really easy and fast. But I use bootcamp (to play games sometimes), and I wanted to know if I save my files on my drive as ive seen people do videos, (something to wipe the drive and put it back in after installing updates) will be I lose my windows 7, I lost the disc to reinstall and he check so I really want to buy a new also do not want to lose the things I put in memory.

    From the retina MacBooks you is impossible to pass the ram as it is soldered to the logic board. As with the hard drive, it's just a card ssd and you can't get those anywhere because their hard to find.

  • I have an OEM of Windows Vista version on a dying computer. Can I buy the upgrade for Windows 8 and install it on the new PC, I'm building?

    I have an OEM of Windows Vista version on a dying computer. Can I buy the upgrade for Windows 8 and install it on the new PC, I'm building? The upgrade, is published at the same time as I'm rebuilding my PC. I'm just looking to replace my OS. I need Vista.

    Hello

    OEM license is tied to the first machine that is installed on the OEM license dies when this machine dies.

    An OEM license is not transferable.

    And you need a legal edition of Windows, enabled for upgrade.

    There is no use, you buy a license upgrade of Windows 8 by itself as you have to upgrade anything of in the new computer, you build...

    You can buy a license of Windows 8 when it comes out later this year.

    See you soon.

  • I need to uninstall I-Tunes before the upgrade to Windows 7 and I'm afraid that I do; lose the music library?

    I need to uninstall I-Tunes before the upgrade to Windows 7 and I'm afraid that I do; lose any music library?  I'll be able to download I Tunes and recover my music library >?
    original title: Windows 7 upgrade from VISTA?

    Hi Jrawie,

    If you want to upgrade Windows Vista to Windows 7, you won't lose iTunes music library. However, there is a chance of losing the music of iTunes library if you choose custom installation.

    You can see the Microsoft article for more information on the upgrade:

    Upgrade Windows Vista to Windows 7

    http://Windows.Microsoft.com/en-us/Windows7/help/upgrading-from-Windows-Vista-to-Windows-7

    You can also view the article mentioned for more information:

    Windows 7 Upgrade Advisor

    http://Windows.Microsoft.com/UpgradeAdvisor

    Let us know the results.

  • I want to uninstall the upgrade of windows 7 and go back to Vista.

    This device comes preinstalled with Vista so that I only have the recovery disks that I made when I first set up the computer.  How can I uninstall the upgrade of windows 7 and reinstall Vista?

    BogeyB,

    If you have made a real upgrade (overlay on Vista), you might be surprised.  Click on the computer and open the D Recovery drive.  Open the folder named Recovery. Look at the bottom left corner.

    What is the date of creation?  Mine is from 2007.  I do not superimpose WIN 7 until 2011, but the recovery is still 2007.

    It's actually your full version of Vista recovery... it didn't get deleted or altered, except if you did.

  • Since the upgrade to Windows 10 and Creative Cloude 2015 (about the same day...), my pen (Intuos 5 Touch) is so much trolling and does more work with it. I downloaded the latest drivers. What should do? Thank you, Dany

    Since the upgrade to Windows 10 and Creative Cloude 2015 (about the same day...), my pen (Intuos 5 Touch) is so much trolling and does more work with it. I downloaded the latest drivers. What should do? Thank you, Dany

    Hi Dan,.

    Please ensure that your Pen drivers are up-to-date. (check the manufacturer's Web site)

    Also, what exact version of Photoshop and Lightroom are you using?

    Search for graphics card drivers update as well.

    Kind regards

    Assani

  • Since the upgrade to 2015 CC and change my site to a paid site, can my customers is more updated of the site through the browser update. When they try, parts and pieces of the site appear and they can see what it takes to update. It's about to make me los

    Since the upgrade to 2015 CC and change my site to a paid site, can my customers is more updated of the site through the browser update. When they try, parts and pieces of the site appear and they can see what it takes to update. It's about to make me lose my client. Help, please.

    We have identified two questions:

    (1) muse implements a markup bad comment, causing in the edition (IBE) browser to display the page properly. Only, this affects IBE and does not affect the published site. The combination of page that causes the bad markup is still TBD.

    (2) IBE does not account for the bad markup that leads to incorrect DOM, leaving IBE unusable.

    We have a fix for IBE (as BC) who is ready to be tested. We will update this thread when the fix is on.

    Sorry for the inconvenience.

    Jason San Jose

Maybe you are looking for