Desktop monitor p7-1254 losses at startup

Similar Questions

• All menus have a display problem (flash) when you use FF on extended desktop monitor

  I use two monitors at work. SFO I have show FF on the "secondary" (extended desktop) monitor, all menus (normal menu, bookmarks, right-click), hot flashes from visible to hidden and so forth).

  then you can also try to disable hardware acceleration in firefox > options > advanced > general.

• How can I chage the direction of one of my extended in MS XP desktop monitors

  How can I chage the direction of one of my extended in MS XP desktop monitors

  In your notifications area, right-click on the icon for your graphics driver. Since I did not lnow what grapiics driver you have, I can't help you much here. However, this will give you many settings and menus that should include one to change the orientation of a specific moniter.

• Windows XP pro, can not see desktop (just a blank screen) at startup. can access only via the Task Manager. How can I fix? __

  Windows XP pro, can not see desktop (just a blank screen) at startup. can access only via the Task Manager. How can I fix?

  In the Task Manager, click on "File" and select "new task (run).

  Type explorer.exe, and then press the ENTER key.

  If you are able to connect successfully to the windows, scan the entire computer using updated anti-virus software and check the virus.

• Select the desktop monitor window

  Original title: install DMW
  my desktop monitor window is disabled, how do I turn

  Hello

   
  1 did you do changes on the computer before the show?
  2. you receive an error message?

  You can run a convenience store aero and the question.
  Open the Aero Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Windows-Aero

  Also, try the steps from the link provided.
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-monitor-and-video-card-problems

• What is the best way to connect the Xoom to a desktop monitor?

  I would like to power mirror my screen xoom on a desktop monitor for presentations by small group to the site.  I've seen some of the threads on hdmi to vga, hdmi/DVI and hdmi to hdmi, but I'm a little confused as to what is easier.  It seems that if you go with hdmi to vga you will need some type of converter, not just a cable?  If it was just a cable that would be perfect.  In addition, another option would be to hdmi for display port (published in December 2010), has anyone tried this? Thank you!

  @uberpixels,

  I think the easiest way is using a HDMI output on the Xoom to an HDMI-> DVI Cable. or HDMI-> VGA Cable. I use an adapter at right angles (adjusted to avoid breaking), HDMI port which offers a complete female HDMI.

  Here's the thread on this adapter:

  https://supportforums.Motorola.com/message/401234#401234

  Then, connect a HDMI-> DVI Cable for the monitor. If you want to copy to VGA, you may need to add the + 5V using the applicator of tension mentioned in this thread:

  https://supportforums.Motorola.com/message/414527?TSTART=0#414527

  I have a portable DLP I use with the Xoom and choose to use a small HDMI-> VGA Converter that meets my needs. Here's a thread on this configuration:

  https://supportforums.Motorola.com/message/375995#375995

  -Doc

• Properties dialog boxes appear in extended desktop monitor after turning off

  I used the Office expanded shortly to develop a data model. However, when returning on the single screen of laptop, maker of data continues to display dialog boxes in extended desktop monitor and therefore invisible.
  
  If anyone has experienced this problem and is it possible to disable this option.
  
  
  Thank you
  Etienne Piron

  Hi Eric,.

  For some of the dialog boxes, he remembers where the dialog box is displayed, and next time the dialog box is used, it tries to display the dialog box at the same place.
  This can result in the dialog box being invisible if it was previously displayed on a subsidiary monitor that is no longer connected.

  In this case, you can move the new dialogue box on the main screen as follows:

  1 attempt to open the dialog box.

  2. tap Alt space (this opens the dropdown of the invisible dialog box).

  3 M type (this selects the Move option in the drop-down below).

  4 use the left or right arrow key to move the dialog box. (Once you've started it, you will find that you can use the mouse to position the dialog on the screen.)

  You need only this time for the dialog box. Next time it is used, it must appear in the new location.

  David

• Split screen / spilled desktop - monitor and Mac Book

  Hey, I'm trying to split my screen between my screen and my Macbook pro, so I can discover a desktop on my monitor screen and discovers another screen on my Macbook pro. Essentially, I want to be able to play movies while I'm working. So I have something to watch when I'm bored or need inspiration.

  Someone know how to do and can someone help me with this one.

  Thank you

  Hey there, Sammi,.

  Welcome to Apple Support communities.

  If I understand correctly, you want to know how to set up a continuous desktop computer that duration in your MacBook Pro and your external monitor rather than show the same image appears on both screens. Try to take a glance at the article below that describes the available display preferences and it will guide you in the process of setting up the extended desktop.

  OS x: how to use several displays with your Mac in Lion mountain and even before - Apple Support

  Take care.

• Flags of HP touchsmart 23 all in a desktop monitor has a slight tint of red on the left

  I have a HP Pavillion 23 touchsmart all-in-one desktop pc running windows 8.1. My touch screen started showing a slight red tinge on the left side of the screen. The rest of the screen normally shows. I have no idea what may be causing it. I tried to adjust the resolution and colors. I have also checked the power connection and update the video drivers. I am at a loss for what is the cause.

  Hello @Bree0037,

  I understand that your HP Pavilion TouchSmart 23 all-in-One desktop PC has a red tint on the left side of it and looking for assistance. The problem you describe seems to be a physical problem. Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html.
  
  I want to thank you for display on the HP Forums. Have a great day!

• screen cracked on dell inspiron 6000 is possible to connect a laptop computer desktop monitor, I have a connection to put pine for laptop 15 it be used for external monitor

  laptop screen broken is it possible to connect external monitor laptop desk has 15 planter back is then how

  "mannyesp" wrote in message News: * e-mail address is removed from the privacy * .com...

  laptop screen broken is it possible to connect external monitor laptop desk has 15 planter back is then how

  Plug into laptop and the monitor turns on and if not detected automatically, and then use the Fn key and F key (will be CRT or a rectangle on the keyface) switches between the laptop screen, laptop and external outside only.  Leave quickly 10 seconds for system key pass.
   
  You may adjust the settings to make sure that the external monitor is the primary instrument and must also adjust the display settings (be normally click with the right button on an empty area of the desktop by clicking on properties or preferences.

• the desktop icons get very slow at startup - compaq presario r4000

  How can I fix a very slow desktop icons appearing very thin & slow?

  Dear friend,

  Please try the following methods to solve your problem
  Applicable operating systems:
  Windows XP
  Possible causes

  1. Several startup programs.
  2. Any startup virus scan.
  3. Corruption of user profiles
  4. ShellIconCache corrupted restaur頳era file

  In this case the shellIconCache file has been corrupted. Its a hidden file located in the windows directory level that contains a copy of all the icons of the desktop by default. To resolve this problem, re-create the ShellIconCache file by deleting.

  Open folder options by typing the command files to RUN quickly. Select view and select Show hidden folders and files , and then click OK.

  

  Locate the C:\Documents and Settings\Your User of utilisateur\Local Settings\Application Data patch. Delete the file Iconcache.db.

  

  Restart the computer.
  Concerning
  Jinish.K.G
  HCL Infosystems LTD, Pondicherry

• What cable adapter I need to conet my elite 21.5 HP on my desktop monitor

  I bought HP elite to upgrade my monitor, but I didn't need a conection RFP, so I bought an addapter

  but also do not work. It's a way I can connect the monitor.

  Here are the specifications of your desktop HP Pavilion p7-1414 and here are the specs of your LCD display backlit LED 21.5 inch HP Elite L2201x. According to these data, the monitor only has a DisplayPort input and your computer only has a VGA and DVI output. You can't drive a monitor of DP with something other than a DP graphics card. There is no adapter that will solve your problem. You will need to purchase and install a graphics capable of DP to use this monitor. Please visit the website DisplayPort.org and this FAQ for more information on your topic;

  Q: I just bought a monitor that only has a DisplayPort connection. How can I connect to my computer that has VGA, DVI or HDMI?
  A: there is not a cost-effective way to do it. The available adapters operate only from a computer of DP to VGA, DVI or HDMI monitor and not vice versa. If you have a desktop computer, you can buy a graphics card with DisplayPort. Our best advice: before you buy a DP only monitor make sure you DP on your computer.

  Please send Bravo

• Desktop/Monitor audio best installation tips please :@)

  Hi Im new in the world of desktop computers, like Ive never had laptops before so Im used to everything being built together and would like to know any advice on the best set up with the following please.

  I just bought the 3847 Desktop Inspiron with windows 8.1 and monitor Dell S2340L.

  I am connected to the monitor using HDMI.

  I have a pair of old Genius speakers that connect using a connector headphone jack and I can put it is in the monitor or the front of the base unit.

  I don't see a connection headphone jack at the back of the device, which is where I would have preferred it to be. There is no headphone connection where the HDMI graphics card, but above of what there is pink, green and blue circular connectors. Pink has a micro top symbol but Ive means no symbol of the idea that the other two, they are circles with an arrow that goes left and another will (Im assuming that its for connectors on the left and individual right?).

  There he has a way to connect the speakers to the back of the unit rather than the front, can I 'wrong' pc by accepting the speakers via the microphone jack?

  The question because I use the software, Camstudio and Bandicam record stream videos with sound and now I can't get the sound recorded so its in headset before on taking office, he does not record when it is connected to the monitor that would be my first choice and as I say I do not see a connection headphone jack at the back.

  IM wondering if there is a way to do this via the screen or connections that are in the back of the desktop, I do not like these components to the front coming out of my cat to sniff here or pass me and break:(lol.)

  If someone things another type of speakers would resolve the issue too much, I'd appreciate this view.

  It was not any mode of employment with the bureau, if Im wondering if there is a place online that told me all about these things?

  Thanks for reading, hope, that I have not sounded too complicated or anything like that and thanks in advance.

  Ronin :)

  Here are the manuals 3847 Inspiron Desktop. Save this link for future use. Open the Inspiron 3847 PDF specification. The green back panel is your main audio "Line-out" output jack. This is where you would plug in speakers.

  

• HP PAVILION 550-126: start PC Desktop Monitor question

  Installed a HP Pavillion PC with Windows 10 550-126.  I plugged my old model monitor (2009) PC Pavillion, which is a HP 2009 m.  HP 2009 m monitor had a DVI connection, so I bought a DVI adapter to HDMI to connect the new 550-126 Pavilion.  At the start of the monitor shows nothing.  It takes a long time (5-10 minutes) before the login page appears.  When starting I have pressed the "Source" button on the HP 2009 m monitor and it comes up with a block that says "Check Vidoe cable", the block is delivered on one that says DVI is scanning, then digital asset.  I'm trying to understand if the problem is I use an adapter DVI to HDMI or if there is something else that happens - or I need to get a screen that has a direct HDMI to HDMI connection.

  Thanks for the help.

  It's the adapter.

  If you want the video to appear quickly, you'll need a display more modern.

  Yours is a type of old-school LCD vice a LED modern type.

  Fortunately, most modern screens usually have a HDMI input.

• I think that my desktop monitor is broken, how can I check for sure?

  My orange light monitor blinks after a power outage, every once in a while the led green lights but just for a second, disconnected ang plugged all back, computer tower is on but nothing comes on the screen.  I have a laptop but don't know enough about computers to hang the Tower until she.   Any suggestions how I might be able to check in with a laptop?  I need specific instructions I don't know true how all this works.  I use the color code system to connect the monitor to the tower.  The laptop has no large port to connect the monitor?

  This must be where you plug the external monitor with 15 holes. her you would go to the setting on your laptop screen it should automatically detect the new monitor