Desktop Pavilion Elite e9240f update my current H-RS880-Μatx motherboard

Similar Questions

• HP Pavilion Elite HPE - 400z CTO: H - RS880 - Μatx Motherboard BIOS Update caused crash, to see a black screen now?

  I have a desktop HP Pavilion Elite HPE-400z running Windows 7 (64), my computer was working fine, however I thought that I needed to update the drivers and things from the HP website.

  The first thing I installed was the following: H - RS880 - Μatx Motherboard BIOS Update

  That restarted immediately frozen mouse on a black screen. When I turn on the computer the lights and the fan turns on but the screen remains black. Their is nothing wrong with the monitor, it's light is on, but when turn light it just says: "monitor going to sleep".

  I went through these troubleshooting pages: http://support.hp.com/us-en/product/HP-Pavilion-Elite-HPE-Desktop-PC-series/4269972/model/4300925/do...

  http://support.HP.com/us-en/product/HP-Pavilion-elite-HPE-400-desktop-PC-series/4269972/document/BPH...

  without success.

  Any other suggestions of what I could do to fix this?

  Hello

  Disconnect the PC and press and hold power for 30 seconds. Remove and replace the battery CMOS. It's a $4 item. Now let's see what happens. If no joy, then try the steps above once again.

  If your PC support has been changed or modified then put it back in its original state.

• USB 3.0 card desktop Pavilion Elite HPE - 390t CTO?

  Is there a HP (or other) 3.0 card USB compatible with the Pavilion Elite HPE - 390 t CTO desktop PC?

  Thank you.

  Hello

  Your product, it seems that you should have enough space to expand.

  I suggest you find a USB 3.0 PCIe card to any provider of computer frame.  Here are the instructions on installing a PCIe card (you can start with step 2).

• Desktop Pavilion Elite 137c: SATA Interface for adding an SSD

  How will I know what SATA (1, 2 or 3) that supports my Pavilion Elite 137c. I want to add an SSD that says he uses a SATA-3 interface.

  You are the very welcome.

  I think it'll do the trick.

  I added a 330 Intel SSD SATA III in my HP Elitebook 6930p business book, which has the Mobile Intel 4 series chipset, also SATA II controllers, and subjectively, it makes a very nice improvement upon startup and access time.

  I subjectively, because I have not run before and after calibration of performance tests.

  The mechanical hard drive was a high-end drive for laptop Western Digital 7 200 rpm, not a reader laptop slow poke 5 400 rpm.   I had no problem saying that the high-performance SSD.

  If you put any credibility in the Windows experience index scores, the mechanical hard drive had the score 5.9 max, that you can get with a mechanical hard drive and SSD hostage up to 7.6.

• Power for desktop Pavilion Elite HPE 550f.

  I want to know if the power supply for the Pavilion Elite HPE 550f active or passive PFC. the specs online say: 460 watts, PFC power adapter. I was not able to find whether it is active or passive.

  Thank you!

  Hello

  He is ACTIVE.  Delta made power supply HP 460 watt (Bordeaux). DPS 460 DB3 - A

  This article will give you an explanation of the difference between assets and liabilities.

• HP Pavilion Elite e9160f update video card

  I want to upgrade the video card on my Pavilion Elite e9160f.  I know that he only has that a Psalm 350w at this moment I only have a card... video how 230GT measure can I go in the chain of video card without a new PS?  Thanks for the help!

  Hello

  The NVIDIA GT 240 1 GB DDR5 (if you can find one) or the NVIDIA GT 440 1 GB DDR5 would be a good choice.

  Review the performance of NVIDIA specifications. Look at the specifications of strip memory bandwidth and level of DirectX support.

• HP Pavilion Elite m951of: update the BIOS

  My computer BIOS is American Megatrends, Inc. 5.35 12/16/08. I want to run a program that requires a virtual machine. It seems that my BIOS is virtualization support nt. It seems that my BIOS may not be updated to support virtualization. My understanding of this is correct? If this is the case, is there a workaround?

  Please see this document from HP called 'BIOS for motherboard Asus IPIBL - LB Benicia settings'. Scroll down to the section titled "The Power menu settings" for the location of this option in the BIOS. To enable in BIOS, select the "Power" tab and change "Virtualization technology" from "Disabled" to "enabled."

  BUT according to the specifications of your system, the processor, a Q8200 does NOT support virtualization. You must upgrade to a processor which, according to the specifications of your system is compatible with support virtualization as the Q9xxx series. Please see this page "upgrade processor information".

  If you found my answer helpful please say thank you by clicking on the icon of the thumb.
  If my answer has solved your problem, please mark it as accepted Solution. Thank you!

• Pavilion Elite e9240f: selection of replacement HD

  I'm not clear on the issue of HD interface.  E9240f specifications I found do not tell that I need or that you should prefer.  I have a Toshiba 1 TB SCSI drive now, but it sounds horrible, and I want to replace it with another 1 TB HD.  SATA is not serious?  I do not change the wiring inside to take SCSI that is there now.

  Called the SATA hard drive interface.  Your system has the ability to SATA 3GBs.  With your WIN7 SP1 operating system, it's OK to install a hard drive to SATA 6GBs. I suggest you a WD or a Seagate 1 TB SATA 6 GB Advanced Format drive.  It is fully compatible with your system.  WD and Seagate offer a free program called Wizard disk clones your existing system. Here is a link for Seagate program.

• HP Pavilion Elite HPE: updated HP HD & tattoo MOBO

  I need to know if I can use a commercial Windows 7 on a new hard drive Version and not to worry about the tattoo?

  I'll use a full Windows 7 sales and not an OEM.

  Thank you

  Lapaki

  Hi Yes you can use a version of Windows on your laptop but OEM keys will not work after a hardware change. If this helped you to move a point Bravo showing support . Thank you

• Pavilion Elite e9240f: remove a non-existent program

  When I open Control Panel > programs and features, the programs include a program that apparently isn't on my computer.  'S called it Internet Explorer Toolbar 4.9 by Sweetpacks. I can't uninstall it; the uninstall process says that it can't find it.  Part of the given info mentions an .msi file that is involved, but I can't find this file, either.  I can't find the registry entries that mention this file or program.  I am convinced that the toolbar is not really on my PC, but how do I get rid of the entry of the control panel that he mentions?

  Hello

  Thanks for posting in the Forum from HP Support.

  Sweetpacks is a security risk and privacy / adware.

  Please, read the instructions for deletion here > https://malwaretips.com/blogs/remove-sweetpacks-toolbar/

  AdwCleaner should do the trick.

  I would like to know if it works.

• Pavilion Elite NY554AA: Multimedia player of optics on Pavilion Elite e9240f

  Anyone know where I can find a comparable DVD player to replace one that came with my computer?  If it helps the reader is labeled "Compact Disc - Rewritable (Ultra Speed) LightScribe DVD Multi Recorder RDL RW DVD + R DL."

  From what I could find on this model number - it indicates that he came with a BluRay player and SuperMulti DVD burner with LightScribe technology.  Assuming that the drive mentioned in the post is the second, it would be just a matter of finding a DVD/CD player that responds to your price range.  Readers of this nature are reasonable most on any place in the United States.  Just an example

  http://www.Amazon.com/s/ref=nb_sb_noss_2?URL=node%3D1292112011&field-keywords=internal+DVD+drives

  The lightscribe function is especially if you used in the past, but above all not necessary.

• HP Pavilion p6774y: N-Alvorix-RS880-Μatx Motherboard

  My office runs only fans when turned on, the hard drive is not engaging, the monitor keeps just scan for a signal. I checked the connection right, I tried another monitor always the same answer. I took the hard dave and put it in another computer and it came but the motherboard in this computer is not compatible with my hard drive because it wouldn't start windows. I tried to find the same motherboard online and I can't find one. Anyone know what are the mothers compatible with the same or better features than my original for a Pavilion p6774y?

  The HP Pavilion p6774y magnesium Gray edition was released in November 2010, 4 years ago.
  http://support.HP.com/us-en/document/c02629593

  This computer uses a motherboard (N-Alvorix-RS880-formfat (Alvorix)) provided by
  Foxconn using socket AM3 (AMD) and AMD 785 G chipset processors.

  Here is the specification of motherboard Alvorix:
  http://support.HP.com/us-en/document/c02560084

  IF you wish to use a replacement DIRECT, CHECK eBay and sellers of HP hardware.

  IF you want a motherboard FOXCONN retail with the same grip (AM3) and chipset (785G)-
  their motherboards II Deluxe cinema or cinema II Premium may agree.
  http://www.FoxconnChannel.com/ProductDetail.aspx?T=motherboard & U = us0000472

  Foxconn cinema II Deluxe Review (2010): YouTube
  http://youtu.be/lVzPOsvBqv4

  I STRONGLY SUGGEST that you work with Local (with qualified Tech) computer store for upgrade/replacement.

• How to connect my LaserJet 4500 to USB on new HP Pavilion Elite desktop 9517

  I have a new desktop Pavilion Elite M9517-c and you want to continue to use my hp laserJet 4500 color laser printer that has no USB connectivity.  Can you recommend a printer with a USB cable so that I can connect these two? Is this possible?  The printer is in great shape! Thanks for your response in advance

  My God, you're right it isn't the adapter, you need, sorry, here check this link

  http://www.emtcompany.com/catagories/USB-to-parallel-adapters.htm?gclid=CISz2-n2m5kCFRwDagodTU5aCw or

  This one

  http://www.cablewholesale.com/cgi-bin/googletrack.cgi?URL=/catalog/usbadaptors.htm&gclid=CKSK9qP3m5kCFSMSagodPAaICw

• Office Pavilion Elite e9220y: name of the Internet access when you hover over said tskbr network 5. is that HP name or co cable. ?

  Hello

  I have a desktop Pavilion Elite e9220y Home Premium; Win 7; 64-bit computer.

  I'm wired; but have wireless for other things (Kindle, etc..)

  When I open internet access in the bar of tasks and under the "wireless network connection", I see MY connection (and the name I gave my connection) and 5 solid green bars (no problem).

  Above this section, there is an article with a picture of a House (provided by HP, I'm sure), and he says:

  ' Currently logged on:

  and just below it says: (to the right of the photo of the House) network 5

  and just below it says: internet access

  That's all it lists the wireless network connection with my name and the names of other connections in the district.

  My question:

  the name "network 5"?

  HP says it is my cable provider; my cable provider says it's at HP.

  This can be changed?

  Thank you!

  Hello Denise,.

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

  I understand that you have a problem with wireless networks.

  Windows will think it's in a new network whenever it detects a new router. If you have changed your router or the router configuration. Windows creates a new network. But do not worry.

  If you don't want the name of the connection to be listed under active connection, follow the steps.

  (1) open the "Control Panel".

  (2) select and open "network and sharing Center."

  (3) click on the ' icon "(une icône de la maison pour moi) less 'show your active networks'.". " This will open the dialogue "set network properties." Here, you can rename a network connection or a change as the network connection icon.

  4) click on "Merge or delete network locations" to view the list of network connections that are stored. You can merge or remove connections

  Let me know if it helps.

  Have a great day!

• Pavilion Elite HPE-170 t - Wi - Fi adapter with antenna?

  I would like to connect to a desktop Pavilion Elite to a local network. The router is a Linksys EA3500 (802.11n technology). The distance between the router and the wireless adapter on the desktop will be about 30 feet with walls between the two.

  The office doesn't have an outdoor antenna. When I checked for network adapters, I found this: Realtek RTL8168 / 811D Family PCI - E Gigabit Ethernet NIC (NDIS 6.20).

  I use the computer for HD, movies, not for games. Should I buy a Wi - Fi adapter? And if so, which one of these adapters Linksys would give me better performance?

  1. a USB adapter - http://bit.ly/1tg8Cj1

  2. a card PCI adapter with antenna - http://bit.ly/1pzVpSt

  3. a USB adapter with antenna - http://bit.ly/1taGZd2

  Thank you

  Brescia

  Record office:

  Product name: BN496AV-ABA-HPE-170 t

  Product number: BN496AV #ABA

  Operating system: Windows 7 Ultimate 64-bit

  Hello:

  I have the AE3000 on two of my HP business offices.

  It has good reception and never had a problem with either of the units.

  I have a 2-story house with a finished basement.

  My Linksys EA 4500 router is on the second floor.

  One of my desltop of PC's in the basement.  The AE3000 on it, you get 4 bars of reception on the 5 GHz band and 5 bars on the 2.4 GHz band.

  Connection speed is 324 Mbit/s (out of 450) on my PC of basement on the 5 GHz band.

  Connection speed is 216.5 Mbps on bandwidth 2.4 GHz because I have this band the blended value that allows (wireless B and G) to connect legacy devices.

  It works fine on W7 x 64 and x 64 W8.1 (using the drivers W7 on the CD).

  It also comes with a 3' USB cable attached to a docking station so that you can position the camera somewhere for better reception.