USB 3.0 card desktop Pavilion Elite HPE - 390t CTO?

Similar Questions

• Update the bios HP Pavilion Elite HPE - 480t CTO Desktop PC

  I just bought a hard drive 3 TB to my HP Pavilion Elite HPE - 480t CTO and he only sees a drive 746,52 GB under Windows 7 pro 64 bit. My main drive is a 1.5 to and he sees very well. where can I find an update of the BIOS using the new drive? I have been to the page "downloads of software and the driver" and it does not list one. Am I out of luck?

  When I ran Paragon booted from a USB stick to copy my 1.5 TB drive it given the disk as a disk of 2.7 to so I think the bios is seening it?

  EDIT: The Intel rapid storage technology software sees as 2 862 TB, but windows doesn't see 746,52 GB.

  Thank you

  Curtis

  Solved!

  Update card mother sata drivers and program "Fast storage Intel technology" and it now works fine.

  Went to ma-configdotcom and ran their detection app and it recommended JMB36X_WinDrv_R1.17.65_WHQL_eSATA.zip of JMicron and Intel's SetupRST.exe. I ran both, restarted the computer and viola! He works and see all the new drive.  I hope this helps someone else.

• Power for desktop Pavilion Elite HPE 550f.

  I want to know if the power supply for the Pavilion Elite HPE 550f active or passive PFC. the specs online say: 460 watts, PFC power adapter. I was not able to find whether it is active or passive.

  Thank you!

  Hello

  He is ACTIVE.  Delta made power supply HP 460 watt (Bordeaux). DPS 460 DB3 - A

  This article will give you an explanation of the difference between assets and liabilities.

• HP Pavilion Elite HPE - 400z CTO: H - RS880 - Μatx Motherboard BIOS Update caused crash, to see a black screen now?

  I have a desktop HP Pavilion Elite HPE-400z running Windows 7 (64), my computer was working fine, however I thought that I needed to update the drivers and things from the HP website.

  The first thing I installed was the following: H - RS880 - Μatx Motherboard BIOS Update

  That restarted immediately frozen mouse on a black screen. When I turn on the computer the lights and the fan turns on but the screen remains black. Their is nothing wrong with the monitor, it's light is on, but when turn light it just says: "monitor going to sleep".

  I went through these troubleshooting pages: http://support.hp.com/us-en/product/HP-Pavilion-Elite-HPE-Desktop-PC-series/4269972/model/4300925/do...

  http://support.HP.com/us-en/product/HP-Pavilion-elite-HPE-400-desktop-PC-series/4269972/document/BPH...

  without success.

  Any other suggestions of what I could do to fix this?

  Hello

  Disconnect the PC and press and hold power for 30 seconds. Remove and replace the battery CMOS. It's a $4 item. Now let's see what happens. If no joy, then try the steps above once again.

  If your PC support has been changed or modified then put it back in its original state.

• How can I activate the boot usb for my HP Pavilion Elite HPE - 480t CTO desktop PC?

  I have a usb key with the Windows operating system installed. But I could not find a way to get started on the drive on my hpe - 480t.

  Any suggestion?

  Thank you

  Wayne

  NVM. I can boot from a USB on the computer.

• The upgrade graphic card - HP Pavilion Elite HPE - 120it

  Hello! I need to change my graphics card so I would like to know what is best for my office. The model is HPE-120it! I just need to play games in the recent in a comfortable way, but I need resolutions higher than 1920 x 1080 or 3D!

  I hope you can help me but anyway thank you for your time!

  The ASUS can work... Please measure along the slot PCIe x 16, in the back of the computer from any obstruction, to determine the maximum length card that can fit into your computer.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• HP Pavilion Elite HPE-400z CTO: HPE-400z S/PDIF

  I need best plug to the motherboard of the HPE-400z system.  I need to the rider in a video card and the document online say it is an internal port but nothing describes where it is.

  Help, please.

  Hello

  See the image below.

  

  The SPDIF connector has been used with older graphics cards to route the audio signal to the output from the HDMI connector.

• HP Pavilion Elite HPE-510 t - two monitors?

  Hello forum!

  For work I'll put up a brand new, out-of-the-box, desktop Pavilion Elite HPE - 510 t series, and I'm supposed to put up with two monitors. The monitors are both monitors HP 21 "(not sure model number, but pretty sure this info is irrelevant.) Both monitors have a DVI and a VGA output each.

  The problem is... I don't know if the computer can get out to two monitors. I mean, I think it can its such a new computer and the plug about it being very respectable. But at the back of the system, the only entries that I see are:

  1 HDMI

  1 DVI

  assortment of 6 audio inputs (speaker, microphone, etc.).

  1 Ethernet

  4 USB PORTS

  and something audio optical

  But there is also what appears to be two locations that are "closed" for lack of another word. One is what appears to be a DVI input but with a screwed in black plastic piece. I guess I should remove the plastic and it would be an another DVI but on the plastic was the words "DO NOT REMOVE" so I left alone. The other location is what seems to be a HDMI slot with a black piece of plastic glued to the front.

  The computer is capable of ouputting to two monitors?

  and

  What are those waterproof slots?

  Good luck with your responses and thanks in advance,

  Rose_Parade

  rose_parade wrote: there is a second DVI input or a VGA at least that I can see.

  There's a HMDI.  Use a HMDI on DVI connector.  Not very expensive.  Make sure you have the right sex on each end or cable/connector.  See the Big Dave det-related article it upward.

• HP Pavilion Elite HPE - 480t computer and burner blu - ray 12 x HP bd 340i

  Model bd340i in the middle of last year, I bought HP 12 x Blu - Ray burner. When I bought my HP Office in December 2010 model HP Pavilion Elite HPE - 480 t, I installed the burner and everything worked very well. Today, I tried to burn a blu - ray disc, and he returned with can't read media, which stood on imgBurn. So I tried the same thing on the burner systems, and she came back as no drive in the status bar. I have also tried burning CyberLink software and the same thing no disc.

  I then tried to play the two store bought and home made blu - ray disc and could not read media. I was ready to blame it on a bad burner but then I tried a regular DVD the two store bought and done House, and it plays very well. I then tried to burn a single dvd double layer with all the burning software three I have and it is still fine, no problem. It's just the blu - ray media that cannot be read or written. The only supports blu - ray, I used from the first day was Kodak and never had a problem. That's what baffles me.

  At this point, I don't know if it's a hardware or software problem with the computer or burner blu - ray or both. 3 different burning programs works fine on DVD but not blu - ray, DVD plays fine but can't play or burn blu - ray discs.

  Could this laser blu - ray crapped out and the dvd reading and writing laser still works?  Must a blu ray burner still lasers for both media (DVD and Blu Ray)?

  Everything else with the computer works fine. I even tried uninstalling and reinstalling and it is the same, I tried to update the drivers and firmware on your site and still does not work. Please help.

  When did you purchase your product? : December2010
  Product HP Pavilion Elite HPE - 480t CTO desktop PC
  Select a problem area: other
  What is your serial number (SN): [personal information deleted]
  What is your operating system? : Microsoft Windows 7 Home Premium 64
  Your computer is unable to work with Accessories products? Please select all the boxes. other
  What type and brand of CD/DVD media you are using? Kodak 25gig of Bu-Ray and dvd HP
  The CD/DVD writer burner was built in the computer when you bought it? NO.
  You hear the sound from the speakers connected?
  The display on the product seems to work correctly? Yes
  Have you connected the product to your TV, DVD player or a music system? NO.

  If there is an error message, please specify: cannot read media
  Description of the problem: I bought burner HP 12 Blu - Ray model bd340i in the middle of last year. When I bought my HP Office in December 2010 model HP pavilion Elite HPE - 480 t, I installed the burner and everything worked very well. Today, I tried to burn a blu - ray disc, and he returned with can't read media, which stood on imgBurn. So I tried the same thing on the burner systems, and she came back as no drive in the status bar. I have also tried burning CyberLink software and the same thing no disc. I then tried to play the two store bought and home made blu - ray disc and could not read media. I was ready to blame it on a bad burner but then I tried a regular DVD the two store bought and done House, and it plays very well. I then tried to burn a single dvd double layer with all the burning software three I have and it is still fine, no problem. It's just the blu - ray media that cannot be read or written. The only supports blu - ray, I used from the first day was Kodak and never had a problem. That's what baffles me.
  Please provide previous steps of troubleshooting, or information that can help HP help you. : I don't know at this point if it's a hardware or software problem with the computer or burner blu - ray or both. 3 different burning programs works fine on the DVD but not blu - ray, DVD plays very well, but can not play blu - ray.
  Nothing changed since the device was working properly (installation of SW, settings, wiring, etc.): everything with the computer works fine. I even tried uninstalling and reinstalling and it is the same, I tried to update the drivers and firmware on your site and still does not work. Please help.
  How would you describe your level of technical skill? : intermediate
  First name Peter
  Name, first name rider
  [Personal information]

  Arcticwolf, sorry, I miss read your post details. That strangely resembles a failed drive. Try unistalling and reinstalling the drive, including the software and driver. If a problem has occurred, it may fix.

• HP Pavilion Elite HPE - 590uk Desktop PC - graphics card

  Hello

  I have a 'HP Pavilion Elite HPE - 590uk Desktop PC' and seeks to update the graphics card - what is the maximum power of the graphics card can I install? The 420 has a request of 50W - would I be able to switch to a 660GTX to 150W?

  Hello

  The HPE-590uk PC has a 460 watt power supply with a 1 connector PCI-E 6-pin power supply. When considering a graphics card, it is always best to consider the recommendation of power supply as indicated by the manufacturer of the graphics card.

  Consult this publication articleand a measure inside your PC.

  There are a lot of different brands and models of the NVIDIA GTX 660.  The reference of the models are rated at 140 watts to several do not require a 450 Watt power supply.  Looking for a model that is 9.5 "or less in length.

  These articles HOWTO HPshould be useful.

  This EVGA NVIDIA GTX 660is on sale for $129 after rebate.  30/11/2014

• How to add to my HP Pavilion Elite HPE-590uk Usb 3.0

  Hi does anyone know if I can improve my HP Pavilion Elite HPE-590uk for usb 3.0 and if so could you recommend a product that I could buy to do this.  Thanks in advance.

  One of them check it:

  http://www.overclockers.co.UK/showproduct.php?ProdID=CC-003-AK

  This is to use a pci-e x 1 card. You have 2 these slots available. This will show you how do:

  http://h10032.www1.HP.com/CTG/manual/c02255267.PDF

  See the section on the replacement of a card.

  Instead of plugging on the long black slot which is a video card plug into one of the slots black short. You have Windows 7 I think which means that you will need a driver, but that should come on a CD with the card. Will need you a power connector (molex) on the map, too.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• HP Pavilion Elite HPE-500f desktop PC

  HP Pavilion Elite HPE-500f desktop PC - I would like to upgrade food, video card and hard drive. Can I use a SATA III hard drive? Can I use a 4 Gig ATI video card? Those are the weak links in this computer in the measurement of performance, Windows 5.1 index. The ram has already been updated to 16G. I would use a hard drive WD Black edition.

  Thank you!

  Jon A. Schoen

  [email protected]

  You can use a SATA-III HDD but the 785G chipset only supports SATA-II. You won't see any difference, and the SATA-III is backward compatible. You have a 300W power supply. You can put in a better and with a minimum 500 or 600 watt PSU, you can install any videocard, pcie 16 x which will be in good physical shape. In retail offices, there is simply not as much space as in a custom build Tower and best video cards these days are huge things two locations. Don't forget, it fits with room to spare, or you will have problems of air circulation.

• HP Pavilion Elite HPE-555sc desktop PC - will not get past the first screen of the BIOS

  Hello

  Since yesterday my PC, a HP Pavilion Elite HPE-555sc desktop computer, does not start. It freezes at the start screen "HP".

  It only allows me to enter the BIOS and it meets no other entry.

  I thought it might be the motherboard.

  Is anyone know about this problem? Is it already happened?

  It comes to my PC

  My PC was already supposed to be an upgrade, but I would like to know if this can be corrected before I create a new.

  I knew no more probably is not on warranty.

  Thank you.

  Hello

  Which is usually caused by a corrupt BIOS. You can clear the CMOS. Sometimes, but not always, which solves the problem.

  It is of the card mother reference web page.

  Look for the clear instructions of the CMOS. The instructions do not specify this, but it is best to remove the RTC battery before performing the clear procedure of CMOS.

  While the RTC battery is out and the PC unplugged, press and hold the power switch of the PC for about 15 seconds. When you replace the RTC dough the + must be facing upwards.

  Best regards

  ERICO

• New graphics card for HP Pavilion Elite HPE-170 t

  Hi, I'm getting artifacts screen sporadically, Ithink my video card is starting to go bad. I want to get a new one, but I do not know what will fit. My computer HP Pavilion Elite HPE-170 t:

  • Intel Core i7 - 860 quad-core processor [2.8 GHz, 1 MB L2 + 8 MB of cache N3 shared]
  • 8 GB DDR3 1333 MHz SDRAM
  • 1 TB hard drive 7200 RPM SATA 3 Gb/s
  • 1 GB ATI Radeon HD 4850 [2 DVI, HDMI and VGA adapters]
  • LightScribe SuperMulti DVD burner
  • Player 15-in-1 memory cards, 1 USB, 1394, audio
  • No TV Tuner
  • Creative Sound Blaster X - Fi Titanium

  I see by a few other questions here several cards video suggested, but these responses were a few years old and these video cards are no longer available.

  So, any suggestions on the new video cards less than $200, which will be more apt to little and works as easily as possible? Thank you!

  OK, I got my new video card, to be exact of it:

  http://www.Amazon.com/XFX-250E-800MHz-graphics-R7250EZNP4/DP/B00JM5XX9O/ref=dp_ob_title_ce

  http://www.xfxforce.com/en-us/products/AMD-Radeon-R7-series/AMD-Radeon-R7-250E-core-Edition-R7-250E-znp4

  It works like a champ! Took me about 5 minutes to install the card physically and 15 minutes to install all drivers and updates.

  So far so good - everything seems OK, so if anyone is looking for a video card for this configuration, it worked for me.

• HP Pavilion Elite HPE 547c: upgrade graphics card for HP Elite

  I tried to replace/upgrade to update my graphics card for my desktop PC. I tried several video cards, but with each one, once it is installed and the computer turned on, the image does not register with the monitor. Everything else seems to work, but the monitor gives no answer. It was only a problem once the original video card has been removed. The current video card, I am trying to install is the NVIDIA GEFORCE GT 730.

  In the course of the years, I added a memory and the power supply has been upgraded, but all the rest are always original parts (http://support.hp.com/us-en/product/HP-Pavilion-Elite-HPE-Desktop-PC-series/5035344/model/5074426/do...

  Is this a problem with the other parties, who will need to be replaced or is there something else I forget?

  Thank you.

  Hello

  You're dominant, in your case, the most important factor-BIOS compatibility... more recent maps, like the gt730, require the UEFI BIOS to run... you have a LEGACY BIOS system, and cannot do anything, unless you change your motherboard... your pc is a model of early 2011... UEFI standard HP in their systems of end of 2012...

  You can watch other maps, if... the 700 series card youre looking at is a maxwell model 2014... There are in this region that come with a feature of hybrid bios which offers wider compatibility on legacy systems... or you can look at maps more old pascal/fermi architecture that work exclusively on legacy BIOS systems...

  Hope this helps

  This answer solve your message or question?

  If Yes, then share the good news! Inform others that this response was helpful in accepting this solution.
  You can also show your appreciation by giving congratulations.