How to connect my LaserJet 4500 to USB on new HP Pavilion Elite desktop 9517

Similar Questions

• How to create the home group and how to connect two computers that are running windows 7. and also Remote Desktop connection!

  Someone help me how to create the home group and how to connect two computers that are running windows 7. and also Remote Desktop connection!
  step by step information!

  Hello

  I suggest you to refer to the links and check if it helps:

  Create a homegroup

  http://Windows.Microsoft.com/en-us/Windows7/create-a-HomeGroup

  Join a homegroup

  http://Windows.Microsoft.com/en-us/Windows7/join-a-HomeGroup

  Setting up a network home

  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-home-network

  Remote Desktop connection

  http://Windows.Microsoft.com/en-us/Windows7/products/features/Remote-Desktop-connection

  What types of connections remote desktop should I allow?

  http://Windows.Microsoft.com/en-us/Windows7/what-types-of-Remote-Desktop-connections-should-I-allow

  Remote Desktop connection: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/Remote-Desktop-connection-frequently-asked-questions

  Let us know if it helps.

• How can I wipe my drive and reload a new OS on my desktop

  How can I wipe my drive and reload a new OS on my desktop?

  Reboot with the command keys and R keys, use disk utility to erase the computer's internal drive and install a fresh OS.

  If you initially Lion among Apple's USB keys, you need to connect this drive, and then press Option after the reboot.

  (142468)

• M553DN: How to connect printer Laserjet M553DN to Wifi? -(Jetdirect accessory 3000w is already installed)

  Any help is appreciated.

  This printer was designed to be connected to the internet via WIFI.  The printer is not close to a LAN to be connected via a network cable.

  I bought the JetDirect 3000w accessory to allow the printer to have wireless connectivity.  The JetDirect 3000w accessorry is physically installed and I've activated 'Wireless Direct' via the control panel of the printer.  But I can't understand how to connect the printer to the WiFi.

  I looked everywhere in the network printer Panel, safety etc. but can not find the place where or how to connect the printer to the Wifi using Direct wireless.

  Any help is trully appreciated.  Thank you.

  Hello

  The Jetdirect 3000w feature:

  http://WWW8.HP.com/us/en/products/print-servers/product-detail.html?OID=8362161#! tab features =

  It will not connect your printer to your wireless network because it only deploys wireless direct printing. And it looks like you can only configure to use direct printing:

  http://support.HP.com/us-en/document/c04762612

  Kind regards.

• Want to 750-209: how to connect an old sound system to a new computer

  I wanted a new 750-209 and a former speaker of Cambridge Soundworks PCWorks 19th Point Surround 4 + under low voltage. There are 2 connector; Left and right who are article 3 (each take manages 3 drivers). The envy has 1 output. It seems that I need a derivation ending in female connectors.

  My question? How to connect the two? Is it still possible? I'd hate to have a decent sound system of junk. My needs are basic - just to be able to listen on AOL or YouTube.

  Any ideas on how to accomplsh my goal.

  Just to close this debate; unfortunaely the quick response has not responded to the problem. BestBuy has suggested that I try a composed of derivation of a shot and 2 containers. Finally, I got the system works 'after' discovery that the enormous power brick disliked the new arrangement of power when I replaced the old computer with the desire. I had to replace an adapter 3 - wat and consolidate the brick. A lot of noise to get her old system to work but now I have the choice of speakers or headphones driven by a hold on a HDMI monitor. All's well that ends well. Thanks for the interest.

• NB 100: How - top connection Orange UK mobile broadband (usb icon 225 stick)

  I just managed to get my connected nb100, here's how:

  Step 1 - enter the SIM card - instructions provided with the device

  Step 2 - upgrade of the network manager

  #Right click the icon of your management network at the top right and select "about". If it is less than 0.7 (such as mine) upgrade is necessary.

  #upgrade to the network manager > = 0.7
  > sudo gedit /etc/apt/sources.list

  #add the following at the end:
  > main deb http://ppa.launchpad.net/network-manager/ubuntu hardy
  > deb - src http://ppa.launchpad.net/network-manager/ubuntu hardy main

  #save, out, run Manager Update, install updates and restart the computer. If the Network Manager icon is not present - stops completely. Should appear after turning back.

  Step 3 - install the driver OHSS and ozerocdoff
  Locate and download the latest version (1.9 in my case) here: http://www.pharscape.org/forum/index.php?board=14.0

  > cd Desktop /.
  > tar zxvf ass - 1.9.tar.gz
  > cd hso_26 - v. 19.
  > sudo apt - get install build-essential
  > sudo apt - get install linux - headers-'uname - r '.
  > do
  > sudo make install

  Locate and download ozerocdoff
  > cd... /.
  > tar zxvf udev.tar.gz
  > cd udev /.
  > sudo make install

  Step 4 - configure connection
  Right-click on the network manager, and then select "Edit connections" > mobile broadband. Change the listed connection and insert the following code:
  username: orange
  password: orange
  APN: orangeinternet

  When you plug your icon 225 it must connect now.

  When you want to disconnect, pull the icon 225... I tried to use the disconnect on the Network Manager option and my laptop crashed...

  Feel free to copy and improve this howto.

  Dan

  Great! Thank you would be useful and interesting to other people here.

• W530: How to connect 4 external screens without USB DOC

  I want to connect multi monitors without USB - DOC.

  Is this OK as follows?

  1. change the type of connector of the Mini-affichage port to display the port.

  2. "port to port adapter display dual display ' connect.

  3. at each port, more "Display port for port adapter dual display ' connect...

  Please tell me the solution.

  Thank you.

  This configuration will not work.

  You need a workstation series 3 dock with 2 sets of DP ports.

  Need you a separator of RFP for each of the DP ports on the dock.

• How to connect HP Laserjet 1012 Windows 7?

  I'm trying to connect my HP Laserjet 1012 to my new Lenovo laptop with Windows 7 computer, but
  It will not load the required program from the original program disk HP Laserjet.  What
  Do I connect the printer to my laptop?

  I'm trying to connect my HP Laserjet 1012 to my new Lenovo laptop with Windows 7 computer, but
  It will not load the required program from the original program disk HP Laserjet.  What
  Do I connect the printer to my laptop?

  The 'necessary' program is a pilot. And a Windows 7 pilot certainly isn't on the original HP disk, because Windows 7 did not exist when the first HP 1012 is out.

  Apparently there is no Windows 7 driver for this printer and You ' r eout of chance. Here is my standard message on this topic:

  Whenever you switch to a new version of Windows, you must install the drivers (software that interfaces between the hardware and Windows) for printers, scanners, video cards, etc., that have been written for this new version of Windows.  And also note that you need different drivers for a 32-bit version of Windows and a 64-bit version.

  It is the manufacturer of the hardware to write and make available to download these drivers. Especially if your hardware is older, it can be good the manufacturer has decided that it is not worth his time and effort to develop drivers for the hardware it sells is no longer.

  Check with the manufacturer or on their web site to see if there is a pilot. If not, you're out of luck. Also consult their websites in other countries, if there is any; Sometimes you can find the driver you need in this way.

  In the future, before you make such update or buy a new computer with a new version of Windows, make sure that you have done the appropriate research to find out what drivers do not exist, and therefore what equipment you need to replace if you upgrade.

• How to connect my old HP printer on my new laptop

  I have a HP LaserJet 1100 printer, and I want to connect it on my laptop satellite. I can´t find witch cable to use, if any?

  Hello

  I guess your printer takes only supported a parallel port and uses the parallel cable, but you do not find these ports on the Satellite. Am I wrong?

  Well, my old printer DeskJet 840C uses the same cable that your and I had the same problem with my newest Satellite phone. My old laptop supports the parallel port.

  However, I just bought a USB-> parallel port adapter and it works. But I recommend to test the adapter first because not all working correctly.

• How to connect my Canon MP 495 to a new wireless network?

  I have a Canon MP 495, which worked without any problems. We moved into a new House and I have a new wireless network; I can't the printer reconnected to the new wireless network. How can I do this? The drivers are already installed on the computer.

  Hi 1cor29,

  Since you have changed the locations, you will need to reinstall the drivers on your computer to connect the printer to your network.  We reinstall the printer using the latest drivers on the Canon USA site.  Before reinstalling drivers, you want to make sure that the LAN setting wireless on the printer is enabled. To do this, press the Maintenance key (it looks like a pair of pliers and screwdriver) until the symbol that looks like 'G' appears on the LCD screen, then press the button to activate the wireless LAN.

  Once the wire has been enabled, please click here to access the DRIVERS AND SOFTWARE for the PIXMA MP495 page.  Once the initial download to your model page, follow these steps:

  1. check that the operating system detected in the "OPERATING SYSTEM" drop is correct and if this isn't the case, please click on the drop down menu to select your operating system.

  2. then, click the red arrow next to the "RECOMMENDED FOR YOU" section and click on the drivers of MP file. When you do, a red DOWNLOAD button will appear. Please click the box below the button DOWNLOAD, and then click DOWNLOAD to start the download. The time for the download process can vary depending on the speed of your Internet connection and the size of the file being downloaded.

  Once the file is downloaded, please double-click it to reinstall the printer.  Once the drivers have been resettled, you should be able to print.

  I hope this helps!

  It has not responded to your question or problem? Please call or write to us at one of the methods on the page contact us for further assistance.

• How to connect a printer that uses a LPT1 port to Pavilion p6210f?

  my computer (pavilion p6210f) does not show a LPT1 port.  I got a laser printer that uses this port.  How can I connect it? Thank you

  Hello

  \

  According to its specifications, it has:

  Expansion slots:

  • 1 PCI Express x 16 graphics card slot

• How can I activate the boot usb for my HP Pavilion Elite HPE - 480t CTO desktop PC?

  I have a usb key with the Windows operating system installed. But I could not find a way to get started on the drive on my hpe - 480t.

  Any suggestion?

  Thank you

  Wayne

  NVM. I can boot from a USB on the computer.

• How to set the resolution of the Viewsonic VX2235wm monitor with Pavilion a420n desktop computer?

  1 HP Pavilion A420N

  2 Win XP

  3 Control Panel-> display, does not have the optimal screen resolution, 1680 x 1050 at 60 Hz. The selections available only for a lower resolution without the proportions appropriate for this monitor and the screen image is severely distorted.

  4. installed latest version of the BIOS, video drivers, drivers latest installed monitor, the monitor is a Viewsonic VX2235WM

  Can someone help me out?

  Thank you

  Here are the specifications of your HP a420n desktop and its card mother A7V8X - LA Kamet2-GL6E. The edge VIA Unichrome graphics adapter is old and does not support the extensions on the big screen. 800 x 600, 1024 x 768 and 1280 x 1024 resolutions are more likely that will support the computer, which are all the 4:3 aspect ratios. Based on the above specifications, I would say that after buying and installing a AGP 8 X / 4 X (1.5V) graphics card, your system must manage a 16:10 ratio width / Monitor wide screen without problem.

  Frank

• USB 3.0 card desktop Pavilion Elite HPE - 390t CTO?

  Is there a HP (or other) 3.0 card USB compatible with the Pavilion Elite HPE - 390 t CTO desktop PC?

  Thank you.

  Hello

  Your product, it seems that you should have enough space to expand.

  I suggest you find a USB 3.0 PCIe card to any provider of computer frame.  Here are the instructions on installing a PCIe card (you can start with step 2).

• USB ports do not respond after boot to Windows 7 - HP Pavilion Elite HPE

  I turned on a HP Pavilion Elite HPE this morning and none of the USB ports work under Windows 7.

  Mouse and USB keyboard work well in the BIOS Setup.  But after Windows starts, it is as if he found neither.

  I tried to start Windows in Safe Mode and last known good Configuration and the behavior is the same, the mouse and keyboard do not work even if they do it in the BIOS.

  I tried a different mouse and keyboard and Windows behavior is the same.

  Now, I would like to have active remote destop. Difficult to solve without an input device.

  I found a solution for Windows 7 x 64 failing to detect any USB device on all ports USB to a HP Pavilion Elite HPE-500f.

  After that backup, read and edit the registry remotely to run the utility of Microsoft Devcon registry run key, Devcon announce an error message 39 for USB hubs.  Enter 'Windows error 39 usb hub' in a search engine led me to the next web page that describes the resolution of the problem. I removed the UpperFilters also well described and restarted key and until then. -See more at: http://www.tricksguide.com/solve-device-manager-error-code-39-on-usb-controller.html