Details on the modem Helix WWAN mobile broadband?

Similar Questions

• You can use the same connection to mobile broadband on your laptop & a smart phone?

  You can use the same connection to mobile broadband on your laptop & a smart phone?  IE, exchange between one & the other not use both at the same time?

  Hello

  I suggest you according to the question in this forum and check if that helps:

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking

  It will be useful.

• Portege R600 - Modem not found Mobile Broadband

  I just upgraded my R600 to Win 7 & all seems to go well outside of Wireless Manager is no indication ' no high modem mobile broadband ' but in Device Manager I see Tosh F3507g as working properly.

  Any help appreciated

  Hello

  You can try to install or update the driver 3G once more.
  You can download this here:
  http://APS2.toshiba-tro.de/WLAN/

• How to change mobile broadband telecommunications businesses

  I installed in my X220T factory Sierra Wireless MC8355 - Gobi 3000 card WWAN Mobile broadband.  It came with an ATT SIM card installed in the slot, even if I have not activated the account.

  For reasons of cover and the fact that a prepaid monthly data is available from Verizon, I would prefer to use Verizon.

  What should I do to change from Verizon?  Is it a simple matter of replacing the ATT SIM with a Verizon SIM card; and then activating the service?

  Newbie and need advice.  TIA!

  Hi Dutch!

  Use ThinkPad Mobile broadband to activate. It is in the installation of the factory, and you can get it here:

  http://support.Lenovo.com/en_US/downloads/detail.page?LegacyDocID=MIGR-68495

  If you are using just to Verizon in the United States, you don't need a SIM card.

  Tell us how it goes.

• X 230 technology Ericsson mobile broadband works only with 3 SIM card

  I just got my ThinkPad X 230 (which is adorable!) and bought a 3 SIM card to use with the Ericsson mobile broadband, I've specified with it. Lenovo access connections displays the transmitter 3 and tries to connect, but I was not able to work at all. Any ideas? It starts by not being able to find the provider, but changing 3 3-3 GPRS, EDGE, HSDPA, 3 G only results in a connection failed and the log of the errors below. Any ideas? I don't know if there is a problem with the hardware, SIM card or something else:

  connection status: not connected
  Cause: DHCP server does not.
  Error code: 031
  Recommended action:
  The DHCP server on the network has failed to demand of your system for automatic configuration of IP address. To force another query, click on repair. If the problem persists, contact your network administrator.

  If the problem persists, contact your network administrator and information troubleshooting below.

  Card details
  ***************
  Name of the H5321 gw Driver Mobile Broadband adapter
  WAN adapter type
  Adapter speed 7.2 Mbps
  Enabled the card status
  Connection status disconnected

  Internet settings
  *****************
  Internet Explorer settings
  Homepage
  The proxy settings
  Automatically detect settings? Yes
  Use the automatic configuration script? NO.
  Bypass the proxy for local addresses? NO.

  Information System
  ******************
  System model 2320CTO
  G2ET32WW of the BIOS version (1.12)
  Version of the operating system Windows 7 Service pack 1
  Version of dial-up connections 5.95

  Global settings
  ***************
  Network
  -------
  Allow Windows users without administrator privileges to create and apply location-> No. profiles
  Allow the radio wireless LAN off when idle-> No.
  Activate autodeletion of unused profiles-> No.
  Disable the community function of Peer to Peer-> Yes
  Turn on SMS-> No.
  Allow selection of location with Fn menu profiles + F5 On Screen Display-> Yes

  Notifications
  -------------
  Display the ThinkVantage Access Connections status icon in the taskbar-> No.
  Display the icon in the taskbar-> wireless status no.
  Show the progress indicator window when a profile is applied-> Yes
  Access connections see the gauge in the taskbar-> Yes

  Preferences
  -----------
  Enable sound effects-> No.
  Enable animations-> Yes
  Do not display the connections system tray icon tooltips to-> Yes
  Do not display ToolTips for gauge-> Yes logins

  List of switch automatic location profile
  *****************************************

  Register automatic switching Ethernet connections and prompt me to save the Ethernet ports-> Yes
  Favorite place of the WLAN-> No.
  When there is no other connections, connect via the WAN wireless or WiMAX-> Yes
  WAN or WiMAX profile name-> Broadband Mobile
  List of priority wireless
  ----------------------
  Name of the priority of selection command connection connection details location profile
  ------------------------------------------------------------------------------------------------------------------------------------------------------------

  Log file
  ********

  Debug log is disabled

  Have now resolved myself:

  (1) create a system restore point
  (2) uninstall the mobile broadband and centrino ultimate-N driver in Device Manager, but keep the files
  (3) restart
  (4) access Lenovo Connections connects to mobile broadband. It is then just a matter of go and connect to the wifi also.

  Everything works beautifully now and switching between wifi and mobile automatically. I think it was just damaged TCP/IP settings in one or two adapters.

• How can I connect a laptop to mobile broadband

  WiFi is fine. Ethernet ok too.

  Hi raymondash,

  1. What is the operating system installed on the computer?
  2. Who is the operator of mobile telephony to wide band?

  I suggest that you install the software provided by the service provider to mobile broadband and also refer to the manual supplied with the unit.

  For more information, contact the provider of mobile broadband services.

  What is mobile broadband?

  http://Windows.Microsoft.com/en-us/Windows7/what-is-mobile-broadband

  Allows to connect to the Internet mobile broadband

  http://Windows.Microsoft.com/en-us/Windows7/use-mobile-broadband-to-connect-to-the-Internet

• Portege R700 - cannot activate the top modem mobile broadband

  Hi all!
  I have a big problem with my Portege R700 with Broadband Modem built-in.

  I installed the laptop with the Original CD recovery with Win 7-64 bit - all works well but if I press FN - F8 I only activated wireless and Bluetooth but noch Mobile Internet Modem Mobile Broadband is not displayed in the hardware Manager.

  Where the new driver for FN Options?
  How is the correct name of this option?

  I tried to install all the drivers I found here: https://aps.toshiba-tro.de/wlan/?page=3gdownloads

  None of them worked! I did a clean install, once again - no modem, indicated in the hardware Manager.
  He worked perfectly but after the installation of the new 2 weeks no chance.

  * Issues: *.
  *.) don't see a modem mobile broadband in hardwaremanger *.
  *.) FN F8 show no option to activate the modem

  Help me please - it is an urgent problem because I need this laptop for businesses. :(
  KR
  Philipp

  > do not see the modem mobile broadband in the hardware Manager

  The question is: did you buy a Portege R700 with a module 3G?

  I m asking because different Portege R700 were released with different specifications.

• 3698-4sus Helix has high module mobile broadband?

  Hello

  3698-4sus Helix has a high module mobile broadband?

  SIM location is accessible. It comes with Windows 8.1 pro.

  I put in a Telus SIM card, but there is no device detected mobile broadband. I installed the driver from the Lenovo site.

  Any help would be much appreciated.

  Thank you.

  Good evening and welcome to the community.

  This is the standard configuration of 3698-4sus:

  I7-3667U (2.00 GHz), 8 GB RAM, 256GB Solid State Drive, 11.6 LCD at 1920 x 1080, map chart secure Intel HD, Intel 802.11agn wireless, Bluetooth, UltraNav, chip, stylus, camera, 3 c battery Tablet and 4 c basic keyboard battery, Win8 Pro 64

  No listed WWAN.

  Hope this helps to clarify.

  Kind regards.

• Tecra A10 - 15 c PTSB1E - no modem Mobile Broadband

  I'm looking for help with my problem of internal modem using Wireless Manager 5 (5.2.1047.69).
  I had a problem a week a go that the operating system (Windows XP) has been altered.

  In the meantime, I could not open Wireless Manager 5 (with a message that "no modem Mobile Broadband" and there are other programs that have been affected.) A recovery process was undertaken which included deletion of all programs and re - install.

  The modem worked for a week and I now have the same "No Mobile Broadband Modem" message again.
  I used the modem dongle external vodafone which work currently, but here the restoration of my internal modem.

  Can someone help, please?

  Is the Wireless Manager 5 Toshiba application? I don't think so.
  So if you have problems to use non-Toshiba applications contact producer software and support.

  One more thing: all of the time that you write on the modem internal. What type of modem is?
  As far as I know for its use if internal laptop modem you don't need one Director or another piece of software.

  To be honest, I feel the whole issue has nothing to do with Toshiba.
  Have I misunderstood something?

• Portégé A600-122: Wireless Manager 5: no Modem Mobile Broadband

  I use the Vodafone SIM card in the slot mobile modem of my Portege A600-122. Wireless Manager 5 can't find the modem. Status message: no Modem Mobile broadband. Using Version 5.2.1047.46 driver 5.0.1047.15 with Prof. XP SP3.

  Any ideas what could be the problem?

  You have the drivers loaded in Device Manager? For example you see all references to F3507g in Device Manager?

  Is the message even if you have installed the latest drivers and Wireless Manager 6 http://aps2.toshiba-tro.de/wlan/?page=3gdownloads

• mobile broadband configuration with the sim card

  Hi, I have a X 220 C "nine" i5: find it difficult to connect to my mobile broadband provider

  so I made a location profile, set up mobile broadband as follows: in "config for wwan mobile": serviceprovider: base, / name of the APN accespoint: oke/username: oke, / option for userverification: pap Yes oke / password: oke

  My wwan 'sees' the provider and when I connect after 1 second the connection is stopped. I called my provider: he says my SIM card is oke.

  A I made a mistake?

  Anyone has any experience in setting up technology mobile broadband?

  Thanks in advance

  After bios update oke now

• Modem mobile broadband HUAWEI not install on my Dell pc

  Modem HUAWEI mobile broadband will not install on my Dell pc, model E 1550, HSDPA USB stick of '3 '.

  Configuration / installation error message: Windows failed to install your modem or something like that.

  operating system: Microsoft Windows Vista Home Premium 32
  device connected to the PC: USB cable

  PC is Dell Studio 15
   
  technical skill level is intermediate
  First name B
  First name S

  Freddy

  Hi Freddy5430,

  Access the Web of Huawei site to download and install the latest software/drivers for your modem:

  http://support.Huawei.com/support/

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Tecra Z50 - A can't see the mobile broadband network

  8.1 Windows does not recognize the Sierra LTE mobile braodband on my Tecra Z50.-a.
  There is no software on the Toshiba support site. Observer of Sierra drivers or AirCard.

  He can't see the material in my equipment manager.
  Can't see the mobile broadband in the network domain.

  Need help!

  Thx a lot

  Can you please send full model of your laptop Tecra name?
  By the way: do you use the original pre-installed OS that you got with your laptop?

• R7000 as router with the router for mobile broadband Internet

  Hey guys. First of all, my apologies for my somewhat inadequate English skills. Secondly, I am brand new to the community, so apologies in advance for any fault :-) Third stop, apologize for having a complete beginner :-D

  So, for the issue: I recently bought a router top mobile broadband 4G (4 G MBR) to my apartment, because of the gap of strength and speed signal very low quality of the cable to the ground on my Street (fiber is to come next year).

  But the router provided by my operator isn't on par with my router R7000 Nighthawk when he comes to reach wifi, wifi speed, number of outputs of LAN and power of the processor.

  So, I want to use my R7000 my router, the internet signal from the air to the 4G MBR, then by cable to the WAN of the R7000.
  In other words; I want to just 4G MBR to simply pass / transfer the internet signal to my nighthawk R7000 router so I can use the R7000 as my router, LAN and wifi.

  How can I set this up?

  Thanks for your help!

  Update: the MBR has been no help at all. As far as I could tell, there is no possibility to bridge or pass-through mode. The R7000, as she does the work. I just put it in AP mode, adjust all the wired connections DHCP/auto IP assign and everything works great.

• L440 can't find the Mobile Broadband

  I have L440 with Win7 64 bit. Earlier experienced major WiFi connection problems, which have been set with the card WiFi and BIOS update driver.

  Briefly after that this master of radio wireless control no longer mentions Broadband Mobile, it doesn't show 802.11 wireless/Wimax and Bluetooth.

  Network connections Windows lists "connection Mobile Broadband" as "not connected, N5321 gw Driver Mobile Broadband. Diagnose this connection gives thinking about 'Spin on a high capacity mobile broadband', which I can't do because it is not listed in the master of radio wireless control.

  Any suggestions?