Detect if stunts or native on the compilation or execution

Similar Questions

• Error, while the creation and execution of stored procedure

  Hello

  I'm creating a procedure stored and discovered during the compilation and execution of procedure.

  CREATE OR REPLACE PROCEDURE procTEST
  AS
  BEGIN
  WITH
  AS Report1
  (
  SELECT * FROM Employee
  )

  SELECT * FROM REPORT1

  END;
  /

  ERROR when compiling

  -------------------------------

  PROCTEST update procedure

  Errors: Newspaper the compiler check

  ERROR when executing

  ---------------------------------

  PROCTEST update procedure

  Errors: Newspaper the compiler check
  Error from line: 15 command.
  EXEC procTEST
  Error report-
  ORA-06550: line 1, column 7:
  PLS-00905: object SYSTEM. PROCTEST is not valid
  ORA-06550: line 1, column 7:
  PL/SQL: Statement ignored
  06550 00000 - "line %s, column % s:\n%s".
  * Cause: Usually a PL/SQL compilation error.
  * Action:

  Hello

  user13360241 wrote:

  I want to insert values into the table tmpemployees.

  Insert into tmpemployees

  Select * from Report1

  CREATE OR REPLACE PROCEDURE procTEST
  AS
  BEGIN
  WITH
  AS Report1
  (
  SELECT * FROM Employee
  )

  Insert into tmpemployees

  SELECT * FROM REPORT1

  END;
  /

  I see.  Then, there is no need to use the PL/SQL.  All you need is:

  INSERT INTO tempemployees

  SELECT *.

  OF REPORT1.

  (assuming that the columns match Report1 tempemployees... It is best to explicitly list the individual columns, like this:

  INSERT INTO tempemployees (employyee_id, first_name,...)

  SELECT (col_1, col_2,...)

  OF REPORT1.

  )

  If you need to use the PL/SQL for a reason, you could use the exact same INSERT statement in PL/SQL:

  CREATE OR REPLACE PROCEDURE proctest

  AS

  BEGIN

  INSERT INTO tempemployees (employyee_id, first_name,...)

  SELECT (col_1, col_2,...)

  OF REPORT1.

  END proctest;

  /

  DISPLAY ERRORS

• VISA does not not for the compiled application

  I wrote an application that uses VISA, mainly GPIB resources.  in any case, my laptop has labview 8.5 installed on it.  When I run the app on my phone, it uses the GPIB fine, compiled or not compiled.  When I take the compiled application on my desktop which has run labVIEW files installed on it, the VISA resources are not even detected (nothing appears in the drop-down list control) in the application, but I can see them in MAX that is installed on the desktop computer.  Any suggestions?

  Brent

  It seems that you have not included the VISA run-time when you generated the installation program. You have only included NOR-488 and MAX because the instruments are detected and MAX use visa when he performs an analysis of the instruments. You've created an installer didn't you?

• Some General Questions of CVI - how does the compiler

  Hello

  I work with CVI 9.1 for more then a year during this time i ' v noticed a couple things, I would like to help me to understand.

  1. Work with several C files:
  • When I'm writing a software that uses lets say C files and files of 10 H 10: Main.c Main.h File1.c File1.h Panels.h Panels.uir and so on... I'm implementation of the function in the c file and its deceleration of writing in the file h, i ' v noticed that sometimes I get msgs of the compiler on the conflicts, maybe there's a way I know not just for the CVI?
  • Works correctly with the file UIR for example lets take the files written above, if I have sign - HAND and control led1 and I want to do SetCtrlVal in the Main.c I can implement as this SetCtelVal(MAIN,MAIN_LED1,1); but when I go to file1.c and try to do it, I get the error message that main_led1 is not a control value (I included the Panels.h) this problem happens to me a lot is there a solution? or maybe I am doing something wrong...
  • What is the best way to implement bollean var (true false) for the software? is it possible to add this var always?
  • decelerations of incompatible type: allows you to take the Fmt function for example when I'm trying to use it in another file, I get the decelerations of incompatible type with the names of the files...
  • General question: lets say I want to include in my project and I want to use its features in main.c and file1.c, I included in two files? or there is a way to include it in a single file only?

  2. to access the buttons

  • lets say that I have buttons and I am pressing on it after pressing the button I have a loop for 10 min, I want to create a button give up, but I can't press anything because the keys are "locked out" is there a way besides multi threading to implement this?

  Wow! A very broad set of issues!

  A quick response.

  • Works correctly with the file UIR for example lets take the files written above, if I have sign - HAND and control led1 and I want to do SetCtrlVal in the Main.c I can implement as this SetCtelVal(MAIN,MAIN_LED1,1); but when I go to file1.c and try to do it, I get the error message that main_led1 is not a control value (I included the Panels.h) this problem happens to me a lot is there a solution? or maybe I am doing something wrong...

  There is a basic error in your statement: the first (SetCtrlVal) parameter must be the handle Panel, which is the reference to the object in memory that is created when you call LoadPanel (). Using the name of constant sign is not correct: it may work if you're lucky and you have the Panel handle with the same value as the name of the constant, but this certainly isn't the correct way to address on a panel controls.

  Even if I don't understand the error that you declare: I expect 'the control is not of the type expected by the function' or an error of inconsistent data type (like passing an int to double check) or...

  Remember that each function that processes objects on a Panel must be aware of the handful of Panel, then either you pass to the function as a parameter, or store it in a global variable.

  • decelerations of incompatible type: allows you to take the Fmt function for example when I'm trying to use it in another file, I get the decelerations of incompatible type with the names of the files...

  I normally leave CVI #including the necessary system files: when I use certain functions like Fmt in a source file and compile ICB warns me to add the relevant include file, and it does it correctly. Operating in this way I never had problems with formatting and the I/o library functions. You can rebuild the inclusion list by removing all #includes in yous source files and compilation of the project, this should correct errors

  • General question: lets say I want to include in my project and I want to use its features in main.c and file1.c, I included in two files? or there is a way to include it in a single file only?

  You must include the file containing the definitions of the functions in all source files that use. Or you can create a general include file with all included in your project and include only this one in all of your source files

  • lets say that I have buttons and I am pressing on it after pressing the button I have a loop for 10 min, I want to create a button give up, but I can't press anything because the keys are "locked out" is there a way besides multi threading to implement this?

  It is a general rule that animates the CVI environment: during the execution of a loop inside a function (a reminder of command or another function) the system does not handle the user interface events, so that your buttons appear locked. This can be solved by adding a call repeated (ProcessSystemEvents) inside the loop: this way of all UI events are monitored and managed by the system.

  You must use this method with caution: before entering the loop, you must disable all the controls that can be used during operation (normally only the Quit button should stay active) otherwise, you can enter a situation in which other callbacks are executed during the loop that might interfere with it.

  In such a case, do not put a reminder in the stop button and the use of a global variable I have normally create a toggle button Stop and manipulate it in this way:

  While (1) {}

  ....

  ProcessStemsEvents ();

  GetCtrlVal (panelHandle, PANEL_STOP, &stop);)

  If {(stop)

  ... gracefully out of the function

  break;

  }

  }

  This argument has been discussed several times in the forums: do a search for ProcessSystemEvents returns a large number of discussions you can read

  • What is the best way to implement bollean var (true false) for the software? is it possible to add this var always?

  CVI is not a native boolean value. I used to use an int and test weather it is zero or not

  • When I'm writing a software that uses lets say C files and files of 10 H 10: Main.c Main.h File1.c File1.h Panels.h Panels.uir and so on... I'm implementation of the function in the c file and its deceleration of writing in the file h, i ' v noticed that sometimes I get msgs of the compiler on the conflicts, maybe there's a way I know not just for the CVI?

  I do not understand what you describe: could you add some piece of code allowing to penetrate this situation and report exactly the message the compiler warns?

• class.h file not recognized by the compiler signals section

  Hey. My class .h file is pasted below with a screenshot. The signals keyword is cyan, when I think it should be purple. Also when I mouse over the word he said Macro Expansion (protected) (even though the words of Macro are green).

  I don't think that the compiler is grateful signals: article because the signal that he is apparently not defined.

  Appreciate any help,

  Justin.

  /*
   * Count.h
   *
   *  Created on: 23/03/2015
   *      Author: Justin
   */
  
  #ifndef COUNT_H_
  #define COUNT_H_
  
  #include 
  
      class Count : public QObject
      {
          Q_OBJECT
          Q_PROPERTY(int downloadedDataSinceStart READ downloadedData WRITE setDownloadedData NOTIFY downloadChanged)
  
      public:
          Count(QObject* parent = 0);
          virtual ~Count();
  
          int downloadedData();
          void setDownloadedData(int data);
  
      signals:
  
          void downloadChanged();
  
      private:
  
          int m_data; // The data downloaded in Mb
  
      };
  
  #endif /* COUNT_H_ */
  

  Screenshot:

  

  downloadChanged() is a signal and should not be reported as a RPC function, which means that you must delete these lines (sorry for the formatting):
  {} void County: downloadChange()
  //...
  }

  If you want to run code when the downloadChange() signal is displayed, you must connect a machine slot to this signal, run the code in the slot (ie: onDownloadChanged())

  See here for more info about the signals and slots:
  http://developer.BlackBerry.com/native/documentation/Cascades/dev/signals_slots/

• Is pl/sql language of the compiler or interpreter of programming language?

  Hello guys,.
  
  Is pl/sql language of the compiler or interpreter of programming language?
  
  Thank you
  
  Published by: Polat on 14.Mar.2012 09:09

  >
  Is pl/sql language of the compiler or interpreter of programming language?
  >
  The two-

  See compilation of PL/SQL units for running Native in the Doc of the PL/SQL language
  http://docs.Oracle.com/CD/E18283_01/AppDev.112/e17126/tuning.htm#sthref1023

  >
  You can usually speed up the units of PL/SQL compile native code (code system processor-dependent), which is stored in the SYSTEM tablespace.

  You can compile natively any PL/SQL for any unit, including those providing the database Oracle.

  The program compiled natively units work in all environments of servers, including the configuration of shared server (formerly called "multi-threaded server") and Oracle Real Application Clusters (Oracle RAC).
  >

  And this from the section How PL/SQL Native Compilation Works
  >
  How does the Native Compilation of PL/SQL
  Without native compilation, statements from PL/SQL in a PL/SQL unit are compiled into an intermediate form, the system code, which is stored in the catalog and interpreted at run time.

  With native compilation of PL/SQL, PL/SQL instructions in a PL/SQL unit are compiled into native code and stored in the catalog. Native code should not be interpreted at the time of execution, so that it runs faster.

  Because the native compilation applies only to the PL/SQL statements, a unit of PL/SQL that uses only SQL statements may not work faster when it is compiled into native mode, but it works at least as fast as the interpreted code. The compiled code and the interpreted code are the same library calls, their action is the same.

• Is there an app Golf GPS for the Apple Watch series 2 which is "native" to the watch, in other words, should NOT be tied to an iPhone on the golf course?

  Is there an app Golf GPS for the Apple Watch series 2 which is "native" to the watch, in other words, should NOT be tied to an iPhone on the golf course?

  Hello

  You can find this app of interest:

  • PING
    • https://iTunes.Apple.com/us/app/ping/id440740108?Mt=8
    • http://www.Ping.com/about/insideping.aspx?ID=21779

• My iPhone can connect to the computer via Wifi instead of cable? Because I figured that my head of the telephone cable i have problem if the computer cannot detect my folder after plugging in the cable.

  My iPhone can connect to the computer via Wifi instead of cable? Because I figured that my head of the telephone cable i have problem if the computer cannot detect my folder after plugging in the cable.

  Sync your iPhone, iPad or iPod touch with iTunes using a WiFi - Apple...

• The Web Acceleration Client error (513) - internal error of the Web acceleration Client has detected an internal error that caused the connection between the accelerometer of the Web

  The Web Acceleration Client error (513) - internal error
  The Web acceleration Client has detected an internal error that caused the connection between the customer to accelerate Web and server acceleration Web to be broken. A new attempt of the web page may correct the problem.

  I get this error at all times when working in the ancestry.com Web site. I have to reload the page on almost every search I do on this Web site. It is the site of the ONLY I get this error message, can run uninterrupted for several hours on other sites and never get this message. I talked to the people at Ancestry.com support and they did 2 recommendations: turn antivirus (did not help) or switch to another web browser. I tried both 11 IE and Chrome Version 31.0.1650.63 m and I have no problem with either of these 2 browsers this error.

  Is there a problem with the way Firefox and ancestry.com communicate?

  Hello byron.lewis, many site problems can be caused by corrupted cookies or cache. To try to solve these problems, the first step is to clear cookies and cache.
  Note: This will be you temporarily disconnect all sites, you're connected to.
  To clear the cache and cookies to do the following:

  1. Go to Firefox > history > clear recent history or (if no Firefox button is displayed) go to tools > clear recent history.
  2. Under "Time range to clear", select "all".
  3. Now, click the arrow next to details to toggle the active details list.
  4. In the list of details, see the Cache and Cookies and uncheck everything.
  5. Now click the clear now button.

  More information can be found in article to clear your cache, history, and other personal information in Firefox .

  This solve your problems? Please report to us!

  Thank you.

• function index() in LabWindows 2013 of the compiler

  LabWindows CVI 2013 compiler complains about the use of the variable global 'index', even if 2010 LabWindows is OK with that. The error is an error that is redefined as LabWindows 2013 confused with an old C library string index function.

  Is there a simple solution for that, instead of rename my variable global 'index' in another name?

  Hello nhd973!

  The behavior that you are experiencing is unfortunately a known issue in CVI 2013 (see section incompatibilities):

  http://www.NI.com/product-documentation/51877/en/

  Around that, the simplest method is to rename your global variable.

  However, there is a back door that you can use, which forces the compiler to LabWindows/CVI to ignore the internal controls. You can change the following configuration for these built-ins registry key:

  HKEY_CURRENT_USER\Software\National Instruments\CVI\13.0\Environment\DisableBuiltIns

  By default, this key value is False . Setting its value on True allows the compiler to LabWindows/CVI ignore builtins, so you should not encounter the error again.

  Best regards!

  -Johannes

• Why do I get the compile time extremely long with FIFO on the cRIO-9073?

  I use a cRIO-9073 to develop a data acquisition system.

  When I try to use a FIFO to pass data to the host the FPGA, I get extremely long to compile (hours!).

  Currently, I use that a single analog input of a module 9205 in my loop FPGA.

  Y at - it an explanation for that?

  Thanks for any help you can provide.

  Michel

  Paul,

  Thanks for your reply.

  I finally found the problem: the size of FIFO, I requested in the properties of the FIFO was too large to 32K items (for the type of data the FIFO U32) 4 times. He was filling the FPGA, 128 KB of RAM completely, leaving no room for manoeuvre for the compiler for the remaining logic. So bad, there was no warning for that!

  By reducing the size of my FIFO at 4K, the compile time came in 5-10 minutes instead of hours!

  Michel Lanthier

• Error 2013 CVI: the compiler has run out of memory.

  Hello

  I get this error in a source file, I want to debug:

    1, 1   Error: The compiler has run out of memory.
        1, 1   Note: You may be able to work around the problem:
        1, 1   A. Set the debugging level to 'no run-time checking'.
        1, 1   B. Split your source file into smaller files.
        1, 1   C. Enable the 'O' option for your source file in the project.
        1, 1   D. Move large static data structures into new files and
        1, 1   enable the 'O' option for the new files.
  

  Options A and C turn off debugging AIDS especially, and I don't dare edit.

  So no possibility to increase the memory limit?

  
  

• Does Windows natively support the aggregation of links?

  There are some descriptions on the aggregation of links in Wikipedia.

  http://en.Wikipedia.org/wiki/Link_aggregation

  "Note that Microsoft Windows does support not natively the aggregation of links (at least until Windows Server 2008)."

  I was wondering if this description is accurate? And what about the new windows operating system, such as Windows Server 2012 edition?

  Windows xp, Windows 7 and Windows 8 natively supports the aggregation of links? If the answer if not, anyone know why? I know, Linux and other operating systems support the aggregation of links.

  Hi, Peacegump,

  For NIC teaming or link aggregation support, you will need to contact your provider network adapter or an OEM (for example, Dell offers a driver of consolidation).  They provide you with a driver that allows the grouping of NETWORK adapters, because Windows does not offer this feature in the core of the operating system.

  http://social.technet.Microsoft.com/forums/en-us/winserverPN/thread/f200b747-d9fb-4632-b6a4-aaf89c3dcc9b

  Grouping network adapter and clustered servers

  http://support.Microsoft.com/kb/254101

  How to use matching with Advanced Networking Services (YEARS)?

  http://www.Intel.com/support/network/sb/CS-009747.htm

  Windows 7 - aggregation of links to double bandwidth: 2 p., 2 network cards of each

  http://www.SevenForums.com/network-sharing/124720-link-aggregation-bandwidth-doubling-2pcs-2-NICs-each.html

  If you need more information, transfer your question on the Forum on TechNet.

  http://social.technet.Microsoft.com/forums/en-us/winserverPN/threads

• Internal error of the compiler-123002

  Hi all

  I read this error in other post (with the server), I did what it says also in Help:

  -J' reinstalled the drivers and all the things, Xilinx tools are installed as well.

  -I don't have that one device target FPGA (RIO0, SMU-7966R)

  I don't know what could happen, my projects used to run and compile correctly, I changed the location of the screws in the computer in order to get the orderer and there is suddenly no longer works.
  One thing that is quite rare is the option to "Select the server compile" pop up after I press the botton to cancel.

  "LAbview FPGA: the compilation can be performed by the worker of the compilation." The SME worker of compilation are configured incorrectly for this compilation, or maybe a status error '--> I did something with it. "

  When I create another project that connects a simple addition of two constants, don't let compile me, then... This isn't for lack of screws.

  Thank you in advance, it is such a thing as boring.

  Best regards
  Miguel.

  Hi all

  In fact I solved. What happened is that the path of the compiler has been moved to a different folder, so Labview was unable to find it. Put in the correct folder once again was the key.
  It was a stupid question finally, but information is pretty confusing sometimes. I put it here in case other people need.

  Kind regards
  Miguel.

• When Outlook Express 6 detects emails from a name in the right column indicates the folder in which it is in. How can you tell which folder this folder is located in?

  Column of Outlook Express folder in find

  When Outlook Express 6 detects emails from a name in the right column indicates the folder in which it is in. How can you tell which folder this folder is located in?

  OE does not have the capacity to tell you where the folder is located in the folder hierarchy.  You can select different trees under local folders to find what subfolder is and what kind of tree it is under.  Unless folders.dbx is corrupted (which happens a bit), then OE will not create folders for you.  If folders.dbx is corrupt or not, I would suggest that you backup the files and the registry (see www.oehelp.com/OETips.aspx#6) before things become corrupt, because you seem to have a complex organization from your e-mail folders.

  Steve