Detect the loose groups in the tile game

Similar Questions

• Mahjong tiles: game opens, but the game is unplayable

  Mahjong tiles game opens, but cannot select the tiles to play the game

  Are you referring to the games Mahjong Titans, which is integrated in most editions of Windows 7? If so, try to run these games off and then on again as follows:

  Try:

  1. click on Start (lower-left) and then on Control Panel.

  2. click on programs and features.

  3. on the left side of the screen, click on 'Windows turn features on or off".

  4 look for the entry called games & uncheck the box in the box next to it.

  5. click on OK.

  6 reset.

  7. click on Start (lower-left) and then on Control Panel.

  8. click on programs and features.

  9. on the left side of the screen, click on 'Windows turn features on or off".

  10 find the entry called games & tick in the box next to it.

  11. click on OK.

  12 reset.

• Time Machine (on Mac) does not detect the airport Time Capsule

  Originally posted on the page of the airport, but seems to be the better question for this group. Sorry for the double post

  Looking for advice on how to get the Time Machine utility for access to my Time Capsule. I use an iMac in late 2012 with MAC OS 10.12 TimeCapsule is 2015 7.7.7 running latest firmware. Airport utility is the latest firmware 6.3.7.

  When I run the application Time Machine, Time Capsule is not detected. I tried the two WiFi and with cables connected Ethernet (not tried USB yet) and my Time Capsule doesn't have a lightning bolt or firewire ports.

  Open Airport utility & see the airport time capsule. I can see all connected devices, including the MAC, but no prompt activation Time Machine on the Time Capsule.

  I recently used TM on this iMac with a G-Technology drive. It auto detects the time machine and executes a back up. But airport Time Capsule will not.

  Any suggestions?

  Sierra has been problematic with the TC.

  1. make sure you don't have any charge virus protection software. In fact, I would say that disable all software 3rd part at the moment.

  2. make sure that you can actually write to disk of TC.

  Attach the TC disc in the finder and copy a file on disk, you can delete it later... It's just to ensure that you have full write permission. If it does not for the most part, you won't be able to use Time Machine... If you can then try TM immediately...

  Just to be clear, the TC is a network device. You have tested with ethernet and wireless... Ok.. They are only suitable methods. You cannot use USB. And clearly, TC has never had nor will never be ports Firewire or lightning.

  3. no chance that a reset complete TC. This will not delete the files on the hard drive, but you must make sure that the device is configured on the current computer.

  4. There are many positions in these days... read through them and do some research. Sierra is a bleeding edge new... So wait you to spend a lot of the precious liquid if you choose to be an early adopt.

• HP Probook 4530 s: my HP ProBook 4530 s Core i3 17.3 "does not detect the battery...

  Hello everyone,

  This problem happened to me only four or five months and recently I bought a new battery and even this new one doesn't detect the laptop and I don't know what else to do. I uninstall the Microsoft ACPI compatible with battery control method and restart the laptop, but nothing has come at this time there, the battery still is not detected. If you can help me with this problem I will appreciate it.

  Kind regards

  JP.

  Hello JoPerez:

  GoTo this page: http://h20565.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=5060881&swLangOid=8&swEnvOid=4058 there once Utility Tool page goto. Expand it and third a low install Battery Check (Intetnational). This wil let us know if it is software issues by reinstalling the software will write more corrupt software. You have a new battery which destroys a dead battery. Now you have reinstalled the software for this. If it still does not work. Then you know that it is a matter of internal material. That your computer needs minor repairs done on the subject. Could be a burnt wire or wire connection loose a computer repair man would know. Don't let not a Direct HP support because their services are vary bad and very expensive. Trust in me as my computers always returned in a worse state, and then they went to. Six times my HP Touchsmart 600-1050 went in back to back repairs. Seventh time I took my repairman of local computer and bought a good one used to repair damage caused by a Direct HP support and rebuild the computer so I could have a good computer for work.  An estimate in the front when you take it for repairs. If you bought at best buy do not take it for them because they will ship it back to HP Support live also so you end up paying double amount.  You're welcome frrw.

• How to detect the first keypress entry in VI reloaded

  Hello.

  I use VI popup information in TestStand that I want the user to be able to output/confirm using Enter/Return, and I use a key event down in a structure of the event to detect they keypress.

  But the problem is that when the VI is already loaded in TestStand, the structure of the event does not detect the first keypress enter/return.  If I detect the space bar, it works fine.  But enter/return still need first press key before be detected as a key event down.

  Anyone know why this is?

  Best regards

  Øystein.

  You have the game to focus on the rocker checked in the properties of the button.

  See attachment.

  Kind regards

• Is there a way to detect the mouse during the event for the controls within a tab control?

  I need to change the mouse pointer when it moves on controls that are found in the tabs.

  Now when the mouse passes over the tab, LABVIEW does not detect the saperately of controls for the mouse over event.

  Is there a way to do what I intend to do?

  Your problem is with the Panel.Controls [] property. It does not return the controls that are inside containers (tables, tabs, groups) and returns only the container itself. As illustrated by Sam, if you want the references to the controls in the tab, you must get the references to the pages and get the controls on each page and add them to your original table and do this recursively.

  You can either write a VI to do this (or search for it. There was posted here screw that analyzes recursively the FP for all control references) or everything just statically for this control a tab and move. There is also a VI delivered with LV that can help you with this, but I suggest that you not use, because it will be difficult to operate if you generate an EXE file.

  And I also recommend the Tool of Capture of Code.

• How to change the background color in the Solitaire game

  I would like to know if there is a way to extend the colors for the SOLITAIRE game? My father detects the colors of the background and maps are too hard and they appear blurry to me and him also. He wondered if we could add more colors in order to get more variety in both the background and maps. Thank you!

  Sandy

  Hello

  You will not be able to add colors for maps or background, but you can change the color of background and maps and also to enlarge the maps.

  a. Click Start, click games.
  b. Open Solitaire.
  c. click on the game and then click change appearance.
  d. Select your favorite background or bridge color.
  e. Select the option "Large print bridge." This will expand the ID card, but not the card. Cards will be the same size, but the name of the map will be bigger.

  Reference:
  http://Windows.Microsoft.com/en-us/Windows7/Solitaire-how-to-play

  Kind regards
  Afzal Taher - Microsoft technical support.
  Visit our Microsoft answers Feedback Forum and tell us what you think.

• ProcessGPORegistryPolicy: Detected the error 87 when filling registry with settings in the file to archive temporary.

  I'm seeign as below errors in gpsvc.log and gpupdate/force fails with the error below.

  "Processing of Group Policy failed because of internal system error".

  RSOP appears in the confiuration computer, registry error, Unspecified.

  ProcessGPORegistryPolicy: Detected the error 87 when filling registry with settings in the file to archive temporary.

  SetRegistryValue: Could not open the key < software\policies\microsoft\windows\windowsupdate\au=""> 87

  Could you please help in investigating it?

  Concerning

  Murali

  Hello

  I suggest you to send your request in the TechNet forums.

  http://social.technet.Microsoft.com/forums/en/category/w7itpro

  http://social.technet.Microsoft.com/forums/en/categories

• How can I restore function of the basic games.

  Program downloaded UniRegistryRestore, now my basic games will not play.  I use Windows Vista on a 64 bit system

  Hello

  also run the sfc/scannow command.

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally madeprograms,Accessories, right-clickguest, and then clickrun as administrator. If you are prompted for an administrator password or a confirmation, type the password, or clickallow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions

  How to analyze the entries in the log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista

  http://support.Microsoft.com/kb/928228#appliesTo

  If SFC detects the main problems it can't fix you may need to borrow a Microsoft dvd vista not an acer, HP etc. recovery disk and do a repair installation

  read the below tutorial on how to perform a repair installation

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

• Get alert to the Virus: Microsoft has detected the Gaobot.worm Vista

  Virus alert: Microsoft has detected the

  W32/Gaobot.worm.Gen.u - Win32/RBot.3eu! Worm viruses on your computer

  I got this but my antivirus can't find it to remove it.  Any ideas?

  Hi James,

  1. Please carefully follow this post: How to get rid of malware

  2. If still no joy you can find Microsoft MVPs and other trained analysts on the following support sites:
  Aumha.org
  Atribune.org
  SpywareHammer
  BleepingComputer
  Safer-Networking

  3. If you need help with related viruses questions, contact Microsoft Product Support Services.

  To support the Canada and the United States, call toll-free (866) PCSAFETY (727-2338).

  For support outside the United States and the Canada, visit the page Web of Product Support Services.

  If you need more assistance for the position of virus/worm for the Microsoft - security - virus discussion group.
  Through your News Reader:
  News://msnews.Microsoft.com/Microsoft.public.Security.virus
  Via the Web:
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Security.virus

  Hope this helps,

  Vincenzo Di Russo - Microsoft MVP Windows Internet Explorer, Windows Desktop Experience & security - since 2003. ~ ~ ~ My MVP profile: https://mvp.support.microsoft.com/profile/Vincenzo

• vISTA can NOT DETECT THE READER of CD/DVD,

  WINDOWS VISTA cannot DETECT THE CD PLAYER, ONCE CHECK IN DEVICE MANAGER, the PROPERTIES THE SHOWS "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) ». How can I get the DIFFICULTY of THIS PROBLEM?

  Thank you

  Hello

  Code 39 means that the driver is corrupted or missing.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Audio input Inspiron 15 3000 can not detect the headset

  Audio input Inspiron 15 3000 can not detect the headset, but audio dell can detect something trendy. However, the playback sound device cannot detect any helmet. Now I only get gurgling in the helmet. How to solve this problem?

  Hello. To test the headphone switch the native Windows audio driver Realtek audio driver.

  1. open Device Manager (type devmgmt.msc in the box of Windows search).
  2. develop the 'audio controllers, video & game' and right click on "Realtek High Definition Audio".
  3 Select this option to "Update driver software".
  4. click on "Browse my computer for driver software".
  5. click on "Let Me pick from a list of drivers on my computer".
  6. put the "Show compatible hardware" check box if not already checked.
  7. in the list of devices, click on 'High Definition Audio"(native driver).
  8. click on "next".
  9. in the update driver warning box, click 'Yes' (the driver).
  10 restart the portable computer if you are prompted. If not invited, so no need to restart.
  [To return to the Realtek driver, do it again but reverse the names in steps 1-6.]

  If it is still bubbling even with the native driver, test by using other headphones. If still no luck then probably hardware failure. Contact technical support for warranty repair.

  If it works fine with the native driver, then the Realtek driver is buggy. Try a different version of the driver. If you need help with this answer comes back with the full model name (something like "Inspiron 11 3147", etc.) and which operating system there.

• Arrange the tiles in a column, but multiple lines

  When you have the tiles on The start screen of Metro , you can set the group / block a tile only, but when you want to add the second tile to this group / block, you can put only horizontally (from left or right tile existed), in other words, you can add the column within that group, but you can put the new Tile vertically , under a tile already existence.

  I want to define group / block of tiles with a single column, but multiple lines.
  For example, instead of this:
  xx xx xx    xx
  xx          xx    xx
  to get this:
  xx x xx    xx

  xx x xx    xx
  Screenshot:
  http://img9.imageshack.us/img9/4685/win8modernui.PNG

  Hi Mike b. II.

  It's normal. You cannot have tiles in groups vertically. Now in your case, if you change the tiles to large tiles, they will stack vertically.

• I have already uninstall the program but the tile still exist in the Apps directory... I want to remove it...

  I have already uninstall the Prototype but... the tile in the Apps directory still exist under the games... I want to delete manually... Please help me...

  You can reinstall the program, and then maybe you can uninstall correctly, via programs and features?

  Programs folder delete The Program Files is not recommended as it leaves pieces in the registry and in other places.

  If you cannot reinstall, or after any reinstallation successful, you cannot uninstall, then post back with you receive the exact error message.

• To develop a common relational prior measure between teams in the video game database

  Hi all

  We use the Oracle 10 g 2 enterprise database.

  I have a table with 3 columns Gameid, Crewid, Release_Yr

  For each game, there are several lines for the crew has worked on this game.

  Other games have a different number of the crew have been working on this game.

  I want to develop a common relational prior measure between teams in the video game database.

  The idea is to understand the degree of familiarity people have, in a team, based on their prior membership of the team.

  For example game VG1 4 crew members are associated (this will be captured in 4 lines in the table)

  Team A, B, C, D.

  So, for the crew a VG1 game, each prior association (compare all games including the year of release is equal or before the game current year of release)

  will be checked. If the crew has worked three times with the B team on different games (VG2, VG3, VG4) and once with D (VG2)

  them, the measure will be of 3 + 1 = 4

  I'll try to explain this graphically (with crew in columns, well in the table, they are in lines)

  To calculate the measure for VG1

  GAMEID Crewid Release_Yr rank (the rank is just for the sake of explanation)

  --------------------------  ------------------------

  VG1 A B C D 1 2013

  VG2 A B C D 2012 2 X

  VG3 A B C Z 3 2012

  VG4 A B Y Z 4 2012

  VG5 HAS C Y Z 5 2012

  (1) measurement for VG1 to crew A with respect to B

  GAMEID Crewid line

  ----------- ------------      --------

  VG2 A AND B 2

  VG3 A AND B 3

  VG4 A AND B 4

  -----------------------------

  Total 3

  Measure for VG1 for crew has compared to C

  GAMEID Crewid line

  -----------  -------------         --------

  VG2 HAS C 2

  VG3 HAS 3 C

  VG5 A 5 C

  -----------------------------

  Total 3

  Measure for VG1 for crew has against D

  GAMEID Crewid line

  ---------------------------------

  VG2 A D 2

  -----------------------------

  Total 1

  So the final measure for vg1 to crew A = 3 + 3 + 1 = 7

  ================================================

  (2) calculate the same measure for the B = crew

  Measure for VG1 for crew B in respect A + measure for VG1 for crew B over C + measure for VG1 for crew B with respect to D

  3 + 2 + 1 = 6

  (3) calculates the measure for crew C = 3 + 2 + 1 = 6

  (4) calculates the measure for crew D = 1 + 1 + 1 = 3

  /*

  -script

  create the table game

  (

  GAMEID varchar2 (30),

  crewid varchar2 (30),

  release_yr number (4.0)

  );

  Insert in game values ('VG1', 'A', 2013);

  Insert in game values ('VG1', 'B', 2013);

  Insert in game values ('VG1', 'C', 2013);

  insert into set values ('VG1"'d', 2013");

  Insert in game values ('VG2', 'A', 2012);

  Insert in game values ('VG2', 'B', 2012);

  Insert in game values ('VG2', 'C', 2012);

  insert into set values ('VG2"'d' 2012 ');

  Insert in game values ('VG2', 'X', 2012);

  Insert in game values ('VG3', 'A', 2012);

  Insert in game values ('VG3', 'B', 2012);

  Insert in game values ('VG3', 'C', 2012);

  Insert in game values ('VG3', 'Z', 2012);

  insert into game values ('VG4', 'A', 2012);

  insert into game values ('VG4', 'B', 2012);

  insert into game values ('VG4', 'Y', 2012);

  insert into game values ('VG4', 'Z', 2012);

  insert into game values ('VG5', 'A', 2012);

  insert into game values ('VG5', 'Y', 2012);

  insert into game values ('VG5', 'C', 2012);

  insert into game values ('VG5', 'Z', 2012);

  */

  -output

  GAMEID CREWID RELEASE_YR measurement

  VG1         A                 2013                  7

  VG1         B                 2013                  6

  VG1         C                 2013                  6

  VG1         D                 2013                  3

  VG2 A 2012 and so on

  VG2 B 2012

  VG2 C 2012

  VG2 D 2012

  I can implement the solution using sql and plsql and completely free to use any approach.

  My actual table has around games 6,82,803 video

  Total of records in the table is of about 28,03,800

  Crew of average per game is 4 and some games bigger than the 900 crew.

  Thank you very much.

  Sheetal Gupta

  Try this and let me know if something goes wrong. I wrote the request so that, for example for example, crewid X in gameid VG2 doesn't have a corresponding value. His count is therefore 1. If this is not the case, let me know on what needs to be done. If you want it to be 1, then remove the DECODE function and just use COUNT (*).

  SELECT T1. GAMEID,

  T1. CREWID,

  T1. RELEASE_YR,

  DECODE (COUNT (*), 1.0, COUNT (*)) CNT

  GAME T1 LEFT OUTER JOIN

  GAME T2

  ON T1. GAMEID! = T2. GAMEID

  AND T1. CREWID! = T2. CREWID

  AND T1. RELEASE_YR > = T2. RELEASE_YR

  AND EXISTS (SELECT CREWID FROM GAME WHERE GAMEID = T1. GAMEID AND CREWID = T2. CREWID)

  AND EXISTS (SELECT 1 GAME WHERE CREWID = T1. CREWID AND GAMEID = T2. GAMEID)

  GROUP T1. GAMEID,

  T1. CREWID,

  T1. RELEASE_YR

  ORDER BY GAMEID, CREWID;

  OUTPUT:

  VG1 A 7, 2013

  VG1 2013 6 B

  VG1 2013 6 C

  VG1 2013 3 D

  4 2012 VG2

  VG2 2012 3 B

  VG2 2012 3 C

  VG2 D 2012 0

  VG2 X 2012 0

  VG3 A 6 2012

  VG3 2012 4 B

  VG3 2012 4 C

  VG3 2012 4 Z

  VG4 A 5 2012

  VG4 2012 3 B

  VG4 2012 2 Y

  VG4 2012 4 Z

  VG5 A 5 2012

  VG5 2012 3 C

  VG5 2012 2 Y

  VG5 2012 4 Z

  Post edited by: Parth272025