HP Probook 4530 s: my HP ProBook 4530 s Core i3 17.3 "does not detect the battery...

Similar Questions

• ProBook 4720 s does not detect the SD card inserted

  I get no response when a SD card snaps, but 8 GB Transcend card is recognized very well of my little netbook from Toshiba.

  This is the first time I tried a card in this HP, although I got it a few months. Running Win 7 Pro 32-bit.  BIOS HP 68AZZ worm F.0F 18/02/2011.

  Well, I contacted HP support and got a helpful response within a day. Siva gave me urls for two drivers that I apparently needed (not very new drivers and I don't know why they were not there in this new machine, but any way..) and they installed, unlike the one I found just for me and giving a message "forbidden". However, once installed, both raised the box "this program cannot be installed correctly" (that I've seen before and never known what to do about it except devoted to work and hope for the best).

  With the drivers installed, the system * fact * detect the SD card so that it has shown in Device Manager and gave sound signals when it has been installed and removed. But he does not have assigned a drive letter and did not show in Windows Explorer, while it was still incommunicado or to serve as a ReadyBoost file storage.

  Thinking that it seemed that HP problems were over and it is now a Windows problem, I spent a few hours to make the seemingly useless things in Windows, all having to do with recovery of AutoRun, which is not.

  Now the SHIFT key while inserting the SD card could start AutoRun. Also, I gave the command 'net start shellhwdetection' and told me that the service was already running. And AutoFix.exe from Microsoft verified that the shell hardware detection service was on and the autostart value. But to step next, as the wizard repair didn't see that other readers, not the SD card, so I couldn't specify only * that * drive AutoPlay wasn't working on, and which ends the program.

  Support software MS said that if ReadyBoost enabled and there (and it was) and still does not work there because some services he needed had been extinguished. So I Dove to the various lists and tried to turn on anything that seemed relevant and which has not already lit.  Nothing seemed to still accept my changes. Very frustrating. But then I went back to where I had left access control panel in Explorer, and I saw that the SD card has sometime been recognized and awarded drive E. Shazam!

  Therefore, all followed the script and I could bring up the window of the tab (in the properties of the drive E) option for ReadyBoost and say, go ahead. He did, and it seems to work very well. It closes fast when I close the lid, with several major programs running, as well as 4 windows in FF with about 12-24 tablets of each, and it took only 60 seconds to wake up this morning.

  So the problem is solved with something good help at HP, but not gracefully or usefully for others, I'm afraid, because I can't say yet exactly what I did.

• Drive DVD/CD-RW of the proBook laptop does not read the CD mudic

  I use a 4410 s HP ProBook and the CD/DVD drive comes with the laptop for almost 2 years.

  He used to have no problem to read the CD/DVD, but about 2 months ago it stop just reading of CD (DVD is fine). I tried many CDs of different music from different brands, but it did not work so I assumed that the drive had to be replaced.

  However, it works very well with data CD (I just realized it today) so it must have been something wrong with the hardware/software, but I don't know what it is.

  Any suggestion how to solve the problem? I want to try all the options before you use the system recovery and having to reinstall all the software again

  Well... the problem is solved by itself. One of the things that I tried yesterday milion needs!

• ProBook 4330 s: logos of laptop but does not start

  Hello

  When I turn on my PROBOOK 4330 S laptop it shows the hp logo ,and then again repeatedly shows the same... Please solve my problem, because all my files are struck in the laptop...

  Hello

  in fact, the situation for which not all hardware issues, is the image of the operating system has been corrupted that's all... I rebooted just the drive with another AC correceted... and ty for your valuable response

• HP ProBook 450 G2: 8.1 for Windows does not start error 0xc000000f

  My friend laptop has developed an error on startup after use of less than a week. The error reads as follows:

  Windows could not start. A recent hardware or software change might be the cause. TI solve the problem:

  1. Insert the Setup disk and restart your computer.

  2. choose your language settings, and then click "next".

  "3 click on repair your computer."

  If you do not have your system drive contact your administrator

  File: \Boot\BCD

  Sastus: 0xc000000f

  Info: An error occurred trying to read the boot configuration data.

  My friend tells me that there is no external device attached to the laptop and it was working on Excel in time. Windows updates are being installed and the computer laptop ran out of battery and turned off. The computer is restarted, it got the error above.

  System information:

  Processor: Intel Core i5-4210U CPU @ 1.70 GHz

  Current processor speed: 1700 MHz

  Memory size: 8192MG RAM

  BIOS date: 20/09/2014

  BIOS revision: M74 worm 01.05

  I have the DVD of the operating system, but when I select to boot from it, I get error saem. I tried the driver and application recovery DVDs, but that takes me directly in restoring to factory settings menu (I get no repair option). I tried to run diagnostics in the system (quick test). It starts with the battery and after about 10 seconds returns to the previous menu. Looking at the logs, it is said that the diagnistic was canceled, but certainly not by me. I managed to run individual tests on do as the battery, processor and hard drive and they all passed.

  How can we try to repair Windows rather than recreating the image?

  If you create a USB installer or Windows 8.1, you should be able to access the recovery options advanced that you will use the Safe Mode. If you are able to boot in safe mode, then using the system recovery may very well be the answer to the question of the BCD store that appeal to you.

  Follow the instructions on the third party site to create a usb Windows 8.1 installer using a key of Windows 8.1 credits and use it to access the Windows environment.

  https://www.WinHelp.us/non-destructive-reinstall-of-Windows-8-and-8-1.html#media

• HP Probook 450 G1: Windows 8 HP recovery disks has not detected

  Hello

  In the hope of someone can help me. I recently had a problem due to what I have to perform a recovery using HP RECOVERY discs [I ordered it] I don't have the HP Recovery Manager or the recovery of microsoft. So I have to do only through HP recovery disks.

  If his sudden has not detected in my laptop. I hit the bottom of the hard drive, I can feel that it is rotating. When I double clicked on it. It appears that I have to insert the disc. [Although I have inserted]. I wiped also DVDs with a cloth dry go with stripes. I tested on my PC it detected [of course it won't work because it is not HP PC].

  I also diagonsised the hard drive [wide test] component, it has demonstrated that it meets the test. I tested both with other CD/DVD games. It works very well.

  I hope you got my problem.

  Product number: F6B14PA #ACJ

  Thank you

  Hello

  Thanks for posting in the HP Support forum.

  Please correct me if I'm wrong, but from your description, I understand that the HP Probook 450 G1 does not detect the recovery DVDs. However, the other CDs/DVDs work fine and the recovery (at least detected) on another PC media.

  I understand that you need to recover, but despite this, Windows starts correctly now? What is the problem you can get you to try to recover? In Winows, recovery disks are recognized?

  To be honest, I don't know why it is not detected, but there are some things you can try:

  -Boot in the BIOS and disable secure boot + turn on Legacy mode

  Details > > http://h30434.www3.hp.com/t5/Notebook-Operating-System-and-Recovery/The-selected-boot-device-failed-Press-enter-to-continue/m-p/5730515

  Details > > http://support.hp.com/us-en/document/c03653226

  -Try to boot from the media of recovery of the DVD (first is the one that is re. OS - I see, you should have 2 recovery DVDs - one for the OS, one for the drivers).

  keep hitting the Esc key (such as tap-tap-tap).

  This should open a HP Boot Menu. Choose F9 to open the boot options. Select the USB drive as boot option.

  I would like to know if it works for you.

• ProBook 450 G1 (core i5) fingerprint reader problem

  Hello

  My new Probook 450 G1 (core i5) fingerprint reader does not work in win7 64-bit. The problem is that there is a "Validity" software... "on the laptop DVD drivers and he said the fingerprint reader is not awailable or set up correctly but when I remove fingerprint driver digital original hp and let windows to find a driver to do this, the software"Validity. "... "works, but it crashes on stage"fingerprint enrollment ".

  The two drivers (hp and win7) seems fine in "Device Manager", but non of them seem to work with the software "Validity."... ", can someone tell me what is the problem?

  Do I have to use the software 'single pass' rather than the software "Validity."... » ?

  Problem solved!
  I installed "hp client security" and it solved the problem. There not even not need software "impression of validity Finder" and all you need is the finder print driver.
  PS. You must have Microsoft.net 4.5 or 4.5.1 installed before installing ' hp customer security.

• Logitech bluetooth headset is not detected by HP probook 4530 s

  Original title: how to pair the headset wireless for hp probook 4530 s

  I am trying to pair a bluetooth wireless logitech headset to my hp probook 4530 s, but my computer does not detect it.

  What should I do?

  Hello

  Thanks for the question of validation in Microsoft answers community!

  I imagine the frustration you feel when you are unable to use the Bluetooth wireless headset.

  The problem may be with the Bluetooth adapter or with the device itself.

  1. have you checked the device to another computer?

  2. What is the model of the unit?

  3 are you sure you've done the discoverabledevice?

  How to make a discoverable Bluetooth device varies with the devices. If you are unable to find how to make it discoverable, contact the manufacturer.

  I suggest you follow the steps mentioned below:

  Method 1:

   

  Check the settings to make sure that this computer can detect the Bluetooth device.

  a. open the Control Panel by clicking the Start button, then Control Panel

  b. in the search panel box command, type Bluetooth, and then click Change Bluetooth settings

  (c) in the Bluetooth settings dialog box, click the Options tab

  d. to make your computer discoverable to Bluetooth devices, select the check box for allow Bluetooth devices to find this computer.

  e. to allow Bluetooth devices to connect to your computer, select the check box for allow Bluetooth devices to connect to this computer.

  Method 2:

  Run the fixit:

  Bluetooth devices do not work correctly on a computer that is running Windows 7

  http://support.Microsoft.com/kb/980396

  Method 3: Run the hardware troubleshooter

   

  See the site:

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  If the problem persists, I suggest you to contact the manufacturer.

  You can also consult the site:

  Add a Bluetooth device to your computer

  http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-enabled-device-to-your-computer

  I hope this helps. If you need further assistance, let know us and we would be happy to help you.

• HP probook 4530 s does not turn on

  Hello

  My probook parents has had a good run, and recently I added 8 GB of ram and a 250 GB SDS because they were coplaining about it being slow.

  I turned it on this evening and the screen went funny and scrambled, then frozen. I restarted in safe mode, and it froze again.

  I then restarted again and but this time the laptop does not start, the button flashes then dies.

  I unplugged my ac, took out the battery, based on the power button for 2 minutes and replugged the AC, but it did not work.

  Can you help me please?

  Thank you very much

  Hello @aw249 ,

  Thanks for posting on the HP Forums!

  I understand that you have a problem with your laptop. However, since it is a commercial laptop, you should post your question on the map cell of the HP Enterprise Forums for a better answer.

  Have a wonderful day!

  Mario

• HP pro book: 4530 Hp light up not with the inserted battery it lights up when I remove the battery

  Hello

  This morning I tried to switch on my hp probook 4530 s and there is no start, then I pluggged in adapter and still it does not illuminate the LED flashes for some time for 8 seconds and stop, when I turn it on again it does the same thing repeatedly. I removed the battery several times and connects ac, but nothing happened. And now all of a sudden turn on with power supply and no battery plugged in it. Can help me please John this question.

  Clint1

  Hello

  Welcome to the HP Support forum.

  This really looks like a hardware problem. Finally, he could end up by for a service. However, for diagnostics it is very important the number of times the LED flashes / issues.

  Please, check these items official 2 HP on these issues, that you experience now. Follow the appropriate steps that correspond to your case to try to resolve the problem:

  > > http://support.hp.com/us-en/document/c01732674

  > > http://support.hp.com/us-en/document/c03515402

  If you've tried everything but nothing works, I fear that you will need to bring your computer (or ship it) service - repair center authorized HP. If the computer is still under warranty, you must first notify HP support. If you don't know where such a Center, please contact HP support for help to find a. Here's more information:

  > > http://support.hp.com/us-en/document/c00372730

  > > http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html

  I would like to know how this happens. Feel free to post again.

• HP Probook s 4540: fingerprint reader does not

  Hello

  Problem: fingerprint - Windows journal reader under does not have the ability to connect via the fingerprint reader.

  Overview: after installing the drivers of the fingerprint on the HP site and thanks to the HP protection tools to register successfully to fingerprints, I tried to log in via this method, but the Windows Connect screen does not display this option. Device Manager correctly identifies and shows the fingerprint sensor - however, the Control Panel does no detection of biometric devices.

  I really need help with this problem. Details of what steps I took trying to make the scanner work are given below.

  Specs:

  1) 4540 probook s

  (2) Windows 7 64 bit

  (3) i5 - 3210 m, 1 GB Hd 7650 m, 4 GB at 1333 Mhz, 750 GB 5400 RPM, VFS 491 fingerprint reader.

  Details of the problem and the steps of my work to install the drivers:

  After a new installation of Windows 7, I went on the site of HP driver to download the latest drivers for Probook s 4540:

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=5229457&...

  I installed the drivers in roughly in this order:

  drivers ethernet controller 1) realtek.

  drivers audio 2),

  (3) the chipset and USB 3.0 drivers (but not the Intel MEI driver)

  (4) Intel video driver: a problem such that the pilots were not allowed to install. After you disable switchable graphics in the bios, I was able to get these drivers to install.

  (5) AMD video drivers: installed after graphic driver intel HD - installed but Catalyst Control Center was not displayed. Then I reactivated switchable graphics in the BIOS, re-installed these drivers and CCC was now available.

  (6) support for HP keyboard shortcut

  (7) HP Universal camera driver

  (8) fingerprint sensor fingerprint validity

  (9) Synaptics Touchpad driver

  (10) Atheros wifi & bluetooth

  (11) Jmicron card reader

  After driver installation, I installed the HP protection tools. According to request a reboot of the PC, which I did-, he asked for the setting up security etc... Part of this pocess was the registration of fingerprints - successful. However, log off / restart of windows, an option to connect with the fingerprint reader does not appear in the Windows login screen.

  I open the control panel and found there wasn't that no biometric device only tab, even if the Device Manager showed biometric sensor, device and validity (VFS 491). I then uninstall HP protect tools and driver validity sensor fingerprint, and made sure that these services are running:

  -Credential Manager

  -Remote Procedure Call (RPC)

  DCOM Server process Launcher-

  RPC end point mapper-

  -Windows Biometric Service

  Plug-and-Play

  Then as suggested in another post on the forum, I installed first of all this:http://ftp.hp.com/pub/softpaq/sp55001-55500/sp55109.exe , then the drivers of the validity of 4540 s drivers page, then HP protection tools.

  After the reboot HP protect tools as before to register my fingerprints, but still no windows login prompt came to connect with fingerprints. However, a change after installtion of http://ftp.hp.com/pub/softpaq/sp55001-55500/sp55109.exe that has been in Control Panel it is now a tab for biometric devices. However, it is said that windows did not find it all installed biometric devices. A picture is attached showing the Device Manager and Control Panel!

  Please HP offer a solution. Thank you!

  

  OK problem solved. I don't know if it is related to the HP windows 7 system essential updates driver installation and Intel MEI or not - but I install these.

  What has really worked probably was it - > install the drivers of fingerprint and then the HP protection tools. Once rebooted, open HP tools protect, then return to the administration in the lower right corner-> the administration Console-> increase of security system-> tick windows login security and your done. Now, you will be able to connect through fingerprints registered.

• Hello.. I have laptop (hp probook 4520 s), keyboardis does not.

  Hello.. I have laptop (hp probook 4520 s), keyboardis does not. only the letters 'B' and 'n' How do I reactivate? because when I use a keyboard external usb it works? Help, please

  Helder salvation,

  Did you of recent changes made to your computer?

  We will reinstall the internal keyboard drivers and check.
  
  a. click Start, type Control Panel in the search box, press enter, click System, click Device Manager, click on keyboard.
  b. you should find the internal keyboard part as well as any external keyboard used.
  c. right-click on the keyboard integrated in the list, click on uninstall.
  d. unplug the external keyboard.
  e. restart the computer and check if the keyboard internal works.

  Since the external USB keyboard works, if drivers did not fix the internal keyboard problem, I suggest you to contact the manufacturer to check if there is a hardware problem.

  Hope the above information helps.

• Touchpad does not work on my HP Probook s 4525, the yellow light in the left corner is on?

  I have a new HP Probook s 4525 and suddenly, my touchpad does not work as a yellow light in the upper left shows.  Please let me know how I can solve this problem.

  double valve led yellow in the upper left corner of the touch pad. The yellow light is an indicator off status
  This should enable the touchpad.

  Best regards
  ERICO

• HP Probook 4530 s fingerprint reader does not.

  I just bought HP Probook 4530 s Ci5

  6 GB of RAM

  740 GB hard

  1 Gb Radeon graphics card

  Win7 64 bit operating system

  I downloaded the driver and digital persona software from the HP Web site, my system Device Manager shows that the driver is correctly installed (called devices biometric, and under it Validity sensor, its listed version is VFS471). But on windows log on that is showing and then Player Detection is not detected. Same thing is happening in the software (digital persona). I tried different software in different websites.  Please indicate if you know something NEW. I said something new because I saw many people on many sites looking for this problem. But the problem is there.

  When I run the validity sensor driver installation, it will install fine.

  Then I run the last digital persona software it says on his system ("the system cannot check that the fingerprint readers is installed"). And that this is an option to SKIP this part. When I do, it completed the installation and restart the computer. After that the same problem "drive not detected" on windows to connect.

  Hello

  Uninstall the driver and the software for reader fingerpint.

  Resources:
  Uninstall software in Windows 7

  Uninstall or change a program in Windows 7

  Download and install the driver prints digital validity here.
  Download and install HP ProtectTools Security Manager here (inside this package, it is a software for fingerprint reader).

  Restart the system and check the results.

• ProBook 4530 s: probook 4530 s does not turn on

  HIE

  I have a 4530 probook s and now its refuses to turn on after I had closed the lid to take care of something.

  Every time I try to turn it on the screen does not display anything, but the light that indicates that the laptop

  recharges will be continually turning white and orange. When I opened the rear just take a look, I

  seen as a very thin soft wire pointing to the top of the fan. Please help me if you have information on how to solve this problem

  because I was doing my research I wanted next week Monday.

  Concerning

  Wonderful collyns

  According to the message that you have recently published, I want to confirm that this could be a hardware problem and I highly recommend you Contact HP support by phone to get help to get your Notebook diagnosed and repaired by an authorized HP Certified Engineer

  You can also check your warranty here to check the status of the guarantee

  Hope this helps, for other queries in response to the post and feel free to join us again

  * Click on the white button on the right to say thank you Thumbs Up *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  K N R K

  Although I am an employee of HP, I speak for myself and not for HP