Detection of disconnected by mistake the peer socket

Similar Questions

• Disconnected by mistake the internal DVD

  As I unplugged my flash drive, I clicked on remove device safely and quickly selected instead of the DVD player.  I never thought there would be this choice, simply so clicked TOO QUICKLY.

  Checked the Device Manager and there is no listed DVD player.  How can I get it reinstalled?  It is a purchased refurbished laptop from DELL and we have no install disc or manual.

  
  

• Firefox shows "the peer certificate has an invalid signature." ISMA shows "could not trust this certificate for unknown reasons.

  With the help of a PKI on site of 2 levels. Root CA offline (Standalone Windows 2008 R2, Enterprise Edition) and Isma online for delivery of certificates (Domain-Joined, issuing CA)

  ROOTCA certificate installed in the store and the approved display (PKCS #1 SHA-256 with RSA algorithm encryption and uses a signature SHA2)

  ISSUINGCA certificate installed in the store and display "couldn't trust for unknown reasons" has also SHA2 signature with the RSASSA-PSS algorithm

  Certificate issued is for a Web Server front end Lync and when it tries to load the secure web connection. I get the message "the peer certificate has an invalid signature."

  I completely uninstalled and reinstalled Firefox. Removed and added certificates ROOT and ISMA. Note: No problem when using the same certificates in Internet Explorer 8, 9 or 10 on the same system. Lync client also uses the same certificates, no problem. Only when access to the Web Services of Lync from Firefox.
  Question: Firefox NSS #11 internal Module PCKS supports RSASSA - PSS SHA-256 with different hashes? How can I solve this further?

  I finally found the problem. The ROOT CA has the following registry key configuration when cert Isma was published:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\CertSvc\Configuration\IssuingCA\CSP\AlternateSignatureAlgorithm = 1

  This CA cause ROOT to issue the cert with a signature that is encrypted with the algorithm RSASSA-PSS (1.2.840.113549.1.1.10).

  This signature replacement algorithm no is apparently not supported for use with Firefox 27.0

  I changed the registry value on the ROOT CA to a value of 0. Renewed the cert IssuingCA (using the same private key) which is now on display with sha256RSA encryption. I have republished all my default web certificates now using this new broadcast chain CA without problem.

• IPhone 5 s Wont load into the wall sockets?

  My Iphone 5s does not load in the inlet but works perfectly when connected to a USB port on my computer?

  But, I recently visited my parents House and it worked not in the wall socket with the exact same USB and the plug?

  No outlets in my work from home...

  You must visit an Apple retail store or Apple authorized service provider, take your adapter and USB cable with you as well and ask them to connect or to check the card.

  Find an Apple authorized service provider

• I deleted by mistake the column 'FROM' Outlook 2003 mail - please can someone tell me how to get it back

  Ideas:

  • Outlook 2003
  • deleted by mistake the column FRON in the list to the Inbox - how do I get it back?

  Here's an example of adding columns to a view Outlook 2003

  I hope this helps.
  Microsoft® Security MVP, 2004-2009

• My pcg-7a2l is very slow. I want to spend the cpu and ram. What is the cpu socket and the ram need me it?

  My pcg-7a2l is very slow. I want to spend the cpu and ram. What is the cpu socket and the ram need me it?

  Hello

  PCG-7A2L is the configuration of the equipment donated by Sony code. Try to find the model # begins with "VGNFS6". Check the following link to locate the model #:

  http://eSupport.Sony.com/us/p/support-info.pl?info_id=264

  The option to upgrade the processor is not available. However, you can check if the RAM can be improved. Enter the model # below for specifications of Marketing:

  http://eSupport.Sony.com/us/p/select-System.pl?Director=docs

  Try the procedure described on the following link to resolve problems when the computer is running slowly:

  https://us.en.KB.Sony.com/app/answers/detail/A_ID/39709/c/65, kw/66/39709

  If my post answered your question, please mark it as an "accepted Solution".

• Automatic detection of products and check the warranty

  Hi team,

  When I try to auto-detection products and verification of the warranty, it is invited to download the software. I installed this software and you click on automatic product detection and verification of the warranty but it still and always invites me to download the software. I checked in Control Panel--> program and features, the software is installed.

  Please help, how to solve this problem.

  Often the automatic detection doesn't fail - especially now when HP updates on the site.

  Try this > How can I find my model number or product number

  Once you have your info. Check the status of your warranty here.

• DRAC5 "Error when reading the SSL socket connection"?

  Hello

  I have a BIOS of PowerEdge 1950 2.7.0 with DRAC 5 Firmware Version 1.65 (12.08.16).

  When you try to connect to 'Console' I get the error "Error when reading the SSL socket connection".

  I spoke the line "# jdk.tls.disabledAlgorithms = SSLv3, RC4, MD5withRSA, DH keySize.< 768"="" at java.security="" file="" but="" still="" the="">

  I use WIndows 10 with the latest FireFox.

  Thanks in advance,

  Asaf

  I found that these changes were necessary to connect to the DRAC 5 using Chrome and Java 8, rev card. 91:

  In Control Panel > Java > Security:

  1. check "Enable content of java in the browser.

  2. set the security level to "High".

  3. Add each DRAC IP to the list of exceptions

  In C:\Program Files (x86)\Java\jre1.8.0_91\lib\security\java.security):

  Remove MD5:

  jdk.certpath.disabledAlgorithms=MD2, RSA keySize < 1024
  

  Remove SSLv3, RC4 and MD5withRSA:

  jdk.tls.disabledAlgorithms=DH keySize < 768
  

• Library meets live TV with the error: "there are currently no TV signal detected for this channel. The channel may be temporarily off the air. »

  I recently changed my TV card to an analogue of Hauppauge PVR150 at a Hauppauge DVB - S Nova S more. Media Center has worked well before.

  Media Library will recognize the new card, search and branch on 239 satellite channels, but may not display the channels giving the error message "there is currently no TV signal detected for this channel. The channel may be temporarily off the air. »

  I have installed WinTV 7 and that you can view all the channels very well in this program so obviously the map and the intensity of the signal are not the problem.

  In my quest through other forums, I heard problems re codec: mpeg2 and we tried several packs of codecs (including shark007) but with no improvement.

  My last move was to uninstall Media Center, uninstall all codec packs, uninstall the TV card and drivers, then reinstall the media library and the TV card and am still unable to view TV channels.

  Suggestions have greatly accepted.

  I've searched the Internet high and low for a solution to this problem and can lead to nothing more than what is proposed here by Divya.

  The problem seems to be fairly common and seems to be associated with codec. Most of the solutions I've come across related to the installation of media center alternatives and after several tries I finally opted for new version of Media Portal 1.1.0 beta

  Installed without a hitch and so far the interface is similar to the media library but has better customization and the ability to incorporate plug-ins.

  I did try the latest version (1.0.2) of the media portal, but said she had a few problems of stability (probably related to the W7 compatibility).

  Very happy now with Media Portal 1.1.0 Beta so will not need any other solution to this problem.

• The Peer Name Resolution Protocol service (PNRPsvc) or peer network (p2pimsvc) Identity Manager service does not work

  I get the following error message when you run windows network diagnostics. I ran the diagnosis because I have a network with Win 7 Ultimate 64 bit on a computer and WinXP 32 bit on the other.  Curiously, I can easily see and manipulate all files through the firewall of Windows XP. Either way, Windows XP can not see files on Win7. I can drag files to the shared folder, XP can see them, but can not open the same when I enable the share using Win7.  I can see the Win7 computer name and I have a home network without password. When I click on the folder with XP, the error popup grey box says that I might not have permissions to access these files. Contact the administrator of systems etc. My network has the same name on both computers, so I feel totally betrayed by what is happening here. There should be no problem but there is a.

   

  I get this error message when you run windows network diagnostics:

   

  The Peer Name Resolution Protocol service (PNRPsvc) or peer network (p2pimsvc) Identity Manager service does not work, The Peer Networking Grouping (p2psvc) service depends on these two services to work correctly

   

  I've followed these tips nothing does not:

   

  ·                                                                                                                                                                                                                                                     To see which services are/are not running click on the ORB start and type Services in the search box at the bottom of

  the menu. Select Services results.

  Check the columns of type status and commissioning for "Start" and "Manual".

  Those who are not running, then select properties in the right click menu.
  Click the startup type box and select manual in the menu, then click on apply, then OK at the bottom of the window.
  Now try to Start the service for the option in the main window.
  Try the homegroup connection, if the service starts

  Try a reboot if all goes well. The settings may or may not stick!

  Scroll down the page until you see the following...
  Select Services results.

  Hi MarkWebber,

  Method 1: I suggest you to follow the link provided below to start your computer in safe mode with network.

  Advanced, including safe mode startup options

  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  If it works fine in safe mode with network, try to put your system at startup mode minimum state helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2: Studied the problem and found the solution. A file has been corrupted and remove he got running PNRP service. The file has been re-created correctly when the PNRP service started upward. Here is the file for future reference:

  'C:\Windows\ServiceProfiles\LocalService\AppData\Roaming\PeerNetworking\idstore.sst'.

  Hope this information is useful.

• I want to activate the outputs audio multiples to be active, so I don't have to wear my helmet all the time, or need to disconnect anything to the speakers.

  Pretty simple question really. I want to activate the outputs audio multiples to be active, so I don't have to wear my helmet all the time, or need to disconnect anything to the speakers. I checked the 'sound' thing in the Control Panel, but the enable option is not letting actually work. So if I want friends to hear my video games or something else, I turn on my speakers and they can hear it now.

  Thank you.
  Windows 7, 64 bit.

  Audio original tittle: multiple

  Windows does not support this. This is handled by the device drivers or hardware - if they don't support the outputs multiple, you can try the search for an alternative solution.

• Homegroup that my pc can't find the other pc, it seems that the Peer Networking Identity Manager service is not running. How can I make it work

  I lost contact with other computers in collective housing. It would seem that the Peer Networking Identity Manager service (p2pimsvc) does not work. How can I make it work?

  Hi Ken Jones571,

  ·         Did you do changes on the computer before the show?

  I suggest you to set the service to automatic and check if this is useful.

  a. click the Start button and type Services in the Start Search box and press enter.

  b. find the Peer Name Resolution Protocol (PNRPsvc) services or services Peer Networking Identity Manager (p2pimsvc), set it to Automatic to clicking on the service and selecting Properties and change the Startup type to Automatic.

  Method 1: I suggest you try a clean boot and check if the problem persists in the boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

   

  Note: After troubleshooting, be sure to configure the computer to start as usual as mentioned in step 7 of the article mentioned above.

  Method 2: It could be that the NVRP svc and p2pimsvc is corrupted, remove entry can help you solve your query. Check the following location and delete the file idstore.sst

   

  C:\Windows\ServiceProfiles\LocalService\AppData\Roaming\PeerNetworking\idstore. OSH

  Let us know if that helps.

• An analysis has detected a Trojan horse in the C://WINDOWS/assembly/GAC/Desktop.ini file which can be access.

  Original title: C://Windows/Assembly/GAC/desktop.ini

  A scan has detected a Trojan horse in the C://WINDOWS/assembly/GAC/Desktop.ini file but I can't access this file because it is hidden.

  What is a VRU, what should I do?

  Hello

  1. You scan of bases of safety of Microsoft or any other security software installed on the computer?

  Enable the option Show hidden files and see if you can correctly view the contents of the files.

  I suggest you analyze your computer Microsoft Safety Scanner, it will help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Hope this information is useful.

• I uninstalled by mistake the installer of windows 7. How can I install downdload?

  I uninstalled by mistake the installer of windows 7.  How can I install downdload?

  Troubleshoot Windows install

  2438651 how to solve problems that may occur when you install, uninstall, or upgrade a program on a Windows computer

  http://support.Microsoft.com/kb/2438651

  Substitute:

  Unregister Windows Installer and then reregister Windows Installer. To do this, follow these steps:

  1. in the menu 'Start', click on ' execute:.»

  2. in the "Open" box, type "msiexec /unreg", and then press ENTER.

  3. in the menu 'Start', click 'run '.

  4. in the "Open" box, type "msiexec/regserver", and then press ENTER.

  If this is insufficient, the I would say to install the Windows Installer Cleanup utility and run that to remove the Java remains Setup files that can cause problems with your current installation.

  For more information, visit the below mentioned link:

  http://support.Microsoft.com/kb/290301

  ------------------------

  Click Start Orb, in the box, type search: Regedit.

  Highlight: HKEY_lOCAL_MACHINE/SYSTEM/CurrentControlSet/services/msiserver

  Verify that the SYSTEM account has full control. If it does not, add the SYSTEM account with full control.

  Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk.

• Detect a change anywhere in the form after the opening

  Is it possible to script to detect whether a shift since the form was opened? For example, if one of the objects text now has no text or different text or a checkbox is now disabled or a drop-down list selection changed?

  Hi Don,

  Don't know if it of the forum or not, but you need a double is equal to.

  if(Event.Target.Dirty == true) {}

  or, just leave him == true off

  {if (Event.Target.Dirty)}

  Bruce