Detect a change anywhere in the form after the opening

Similar Questions

• Detection of change DAQmx - cancel the event error logging

  I am trying to use DAQmx for detection on some digital lines of changes. I think I installed everything in this article, but I always get error 'Error 1 has occurred to unregister events in the detection of change in Test - Error.vi Unregister'. When I change the structure to register for another event, not involving DAQmx but using the same structure, I get this error.

  I need this implementation on a code that runs for a very long time and according to the above article:

  "Use the Unregister function for events and function to destroy the user events to release the associated events and the reference of user event. LabVIEW unregisters all events and destroyed the existing user automatically events when the top-level VI end of execution. However, to conserve memory resources, National Instruments recommends that you unsubscribe and destroy the user events explicitly, especially in an application that is running for a long period of time. »

  Here are some screenshots of my comic, but also the .vi. Note that the detection of real change does not work well, it's just after I click on 'stop' I get the error generated by the "unregister to events.vi.

  

  

  Note When you transfer the .vi, I saw the issues described on this thread and had to change the name of the file...

  crossrulz wrote:

  You must cancel the registration of the event before deleting the task DAQmx.

  Delete the task implicitly cancels registration of events.  If you disable the task, rather than simply cancel, the event is already cancelled and you don't need two nodes.

  Or quite simply, the event is part of the job.  no tasks, no event and LabVIEW cleans the records for the non-existent event.  Other events that are not 'owned' by similar of e/s Sessions must use the unregister (as of the events of user)

• C4580 change settings (from the open to WPA) wireless

  Hi all

  I have a C4580 and he was initially installed with wireless open (for various reasons at the same time). Now, I changed to use WPA and a password. Before the change, it is a very happy camper and worked very well. Now, he said only: "disconnected" and I can't print. Can I change any laptop here in seconds to use the new settings, but I can't find anywhere that I can change the settings. I got two calls for support for about 4 hours of total and they executed me all over the place. I can't believe there is no setting I can change to activate the new settings of the router into the printer. Other than to do an uninstall and reinstall, is there a shorter method to activate the new configuration of the router? As I mentioned, it was quite nice before changing the security setting. It is really becoming a car accident. Can anyone offer a solution more simple as the relocation (or supported by calling again? Please no.... not yet)?  Thanks for any help!

  Kurt

  Sure!

  • First, remove the password of your network (temporarily) so that your printer can be back on the network.
  • Then, print a the front of the printer Network Setup Page.  Get the IP address of the printer.
  • Now type this IP address in a browser.  You will see the printer's built-in Web server.
  • Go to the tab network, 802.11 (left), Advanced tab.
  • Enter your new password information, etc.  But first... before you leave...
  • Go to the tab Configuration IPv4 and set a manual IP address of the printer (the one used above), subnet 255.255.255.0, gateway, and DNS are the IP address of your router (probably your IP printer with a '1' after the last point instead of what the printer has).
  • Click 'apply '.  The printer works now with your new password, but not before you go back to your router to apply it again!

  Reset the printer and the router and good luck!

• After that I changed pattern in the Mozilla Firefox browser, Mozilla does not work

  I just change the pattern in the browser. When I did this earlier nothing happen. I have change and close the open windows. When I do that the browser does not open.

  This has happened

  Each time Firefox opened

  I changed my mobile browser

  User Agent

  Opera/9.80 (Windows NT 6.0; U; PL) Presto/2.6.30 Version/10.60

  You can either see if you can start Firefox in that troubleshooting Firefox issues in Safe Mode , or remove the lines lightweightThemes of the prefs.js file in the Firefox profile folder

  Prefs in prefs.js:
  user_pref ("lightweightThemes.isThemeSelected", true);
  user_pref ("lightweightThemes.persisted.footerURL", true);
  user_pref ("lightweightThemes.persisted.headerURL", true);
  user_pref ("lightweightThemes.usedThemes", "");

• Cannot open forms after changing the port no 80

  Hello
  
  We have oracle ebs 12.1.3 instance, I changed the default port 8000 to 80. Now, I'm getting the login page without specifying the port no, but my problem is that I can't launch the forms after you complete this task. can someone help me with this
  
  Kind regards
  Chandrasekhar.

  Hello

  Alhtough Web development server port does not ask that question, autoconfig successfully completed? can u try to bounce application and see if it works?

  What is the result of status adopmnctl.sh

  also check for the error in the apacha/web/form server logs, use below for MOS locate: -.
  How to find the location of installation, automatic configuration, patching, Clone and other newspapers in EBS R12 [ID 804603.1]

  Thank you
  JD

• The appearance has changed, and even the Start button is no longer a circle but the former rectangle that says start after the installation of an update.

  I recently installed an update of Windows for Vista.  The appearance has changed and even the Start button is no longer a circle but the former rectangle that says start.  How can I get the old look back with on the uninstallation of the update?  Thank you

  Original title: updates

  Hello

  It seems that the update was for graphics, as it changed the appearance

  If the update is the problem, you will need to remove it or download and reinstall the graphics driver from your computer or the manufacturer of the graphical Web site map.

  _________________________________________

  Read this information about updates:

  Microsoft gives sometimes you updates for the 3rd party hardware: graphics, network cards, etc.

  You should only get the latest drivers for them to real hardware manufacturer's website, as Microsoft normally does nor those have the most recent drivers available as Microsoft relies of the 3rd party hardware Manufactuer to provide.

  But unfortunately, the only way to know which is the update of the problem is to install them one by one, until you find the 'wrong' for your installation.

  You can do a system restore to get back until it has been installed (which is NOT the best way to remove an update) or follow this method:

  'Remove an update'

  http://Windows.Microsoft.com/en-us/Windows-Vista/remove-an-update

  When you have found the issue of update of the list of updates which is presented > then right click on the update problem > select Hide update > and it will not be available to you once again

  "How to hide or show an update of Windows Vista"

  http://www.Vistax64.com/tutorials/72491-Windows-Update.html

  "How to hide or restore the updates of Windows hidden in Windows 7 and Windows 8"

  http://www.SevenForums.com/tutorials/24376-Windows-Update-hide-restore-hidden-updates.html

  _____________________________________________

  Here's how to chanage update settings, if you think it is necessary to:

  "Understanding Windows Update and Extras in Windows Vista and Windows 7.

  http://www.bleepingcomputer.com/tutorials/Windows-Vista-updates-and-extras/

  Or the other of these two update settings will give you the chance to see what you want to install through Windows updates;

  Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

  Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.

  But remember you normally only have problems with hardware 3rd party drivers. Other updates are to improve the Performance and security of your system

  See you soon.

• Do not forget the values in the form after the page

  Hello
  
  IM absolutely new to APEX (as you can see this is my first post ;)), I've read the documentation, I found on the oracle Web site and know at least the basics...
  So I started building my first application and already have my first problem :D Maybe you can tell me if I want to do is possible and how to do it.
  
  I have several pages by a form on the left side as well as a report of sql on the right side.
  The form contains fields that are the list of values (fields that contain foreign keys so that the user can select only a valid value). I have a button next to each list in the value field. When the user clicks on the button I have a branch to the same page and the sql report is updated. Depending on which button next to the list values with foreign keys was pressed, it shows the complete table list the values of references to (so the user can see that contains the foreign key, it is to select). After I finally made this work.
  
  But the problem is: when the user enters values in the form and then click on a button to see what the foreign keys contain values that it has already entered disappeared. But I want the values that he went in to stay in shape after he pressed the button. is there an easy way to do this? the only thing I could imagine is to create a variable for each form field, save current in variable values before the page is sent and write the values of the variables in the form when the page reloads. but it seems kind of the beast... I must do this for each page of this kind (which are many). so is there a better way?
  
  thx a lot :)

  I think you're talking about the region 'filter' on the left side as 'form '.

  Try this... Open the setting page , click on the item to change (to that values stay after submit), goto SOURCE region, here the source value * "only when the current value in session state is null" * this will fix the problem.

  See you soon,.
  Hari

• I use outlook express 6 and I can receive an email of great but when I try to send it after making the necessary changes, i.e. the signature I get the message 'too big for the server.

  I use outlook express 6 and I can receive an email of great but when I try to send it after making the necessary changes, i.e. the signature I get the message "too big for the server" responses I've seen so far tell me absolutely nothing

  Well, the error message says it all.  "" too big for server".

  There is a limit imposed by your ISP/mail server, which you don't mention.

  Not only the servers have limits on the size, this is not necessarily the same for incoming and outgoing messages.

  If you say you use the e-mail program and the name of your e-mail server, maybe we can shed light on the more specific issue, but the problem is definitely with them and not Outlook Express.

  P.S. I'm not sure what you mean by 'signature'

• XP key wep changes for new router linksys after the connection. you need to reinstall the WEP every time you start from the top.

  XP key wep changes for new router linksys after the connection. you need to reinstall the WEP every time you start from the top.

  Hello

  Let us perform the steps below and check out them.

  a. click "Start," "Control Panel", then "Add or Remove Programs". In the box "Currently installed programs", find the name of your wireless router. Click on the name of the software, and then click 'remove '. Click 'Yes' when prompted to confirm.
  b. click "Start" then "run". Type "Services.msc" and click "OK". Select 'Wireless Zero Configuration'. Click on 'start '.
  c. click 'Action', 'properties '. In the drop-down menu "Startup Type", click on the arrow and select 'Automatic' to assign the commissioning of automatic Wireless Auto Configuration. Click on 'OK '.
  d. restart your computer.
  e. right click on "Wireless connections" icon Select "View available wireless connections." Click on "change the order of preferred networks. Select the name of your network, and then click "Properties". Erase the old key and enter a new. Click the checkbox next to "Automatically use that key." Click on 'OK '.

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Flex - the difficulty to detect status change since the 2.0 update

  Hello everyone. I've been detecting orientation changes in my application without problem throughout until the 2.0 update, now, the events are not firing. Any ideas why the changr in orientation is not detected? I am less concerned by resizing.

  this.addEventListener(SoftKeyboardEvent.SOFT_KEYBOARD_ACTIVATING, resize);             this.stage.addEventListener(StageOrientationEvent.ORIENTATION_CHANGE, change);
  
  ...
  public function resize(e:SoftKeyboardEvent):void{
                  trace("activating"); // does not trace
                  if(currentState == "landscape"){
                      mainTextField.setActualSize(1024, 350);
                      tagwrapper.visible=true;
                  }
                  if(currentState == "portrait"){
                      mainTextField.needsSoftKeyboard = false;
                      accordV.visible=false;
                      tagwrapper.visible=false;
                  }
              }
  
  protected function change(event:StageOrientationEvent):void {
                  if(navigator.stage.orientation == "portrait"){
                      trace("portrait"); // does not get traced
                      mainTextField.needsSoftKeyboard = false;
                      IMFConnection.imfConnection.hideInput();
                      mainTextField.setActualSize(mainTextField.width, 1024);
                      tagwrapper.visible=false; //remains visible
                      accordV.visible=false; //remains visible
                  }else{
                      IMFConnection.imfConnection.showInput();
                  }
              }
  

  I also had a feature that has been resizing components on SofftKeyboard.Activate so I think that blocking the call to the StageOrientationEvent. In any case I did take all the stuff I need to do too much in the StageOrientationEvent and he settled in the SoftKeyboardEvent function.

  public function resize(e:SoftKeyboardEvent):void{
                  trace("activating");
                  if(currentState == "landscape"){
                      mainTextField.setActualSize(1024, 350);
                      accordV.visible=true;
                      tagwrapper.visible=true;
                      togglewrapper.visible=true;
                  }
                  if(currentState == "portrait"){
                      IMFConnection.imfConnection.hideInput();
                      mainTextField.needsSoftKeyboard = false;
                      accordV.visible=false;
                      tagwrapper.visible=false;
                      togglewrapper.visible=false;
                  }
              }
  

• After leaving the screen saver, display shuts off and change to select the user account screen

  I have a windows7 32 bit desktop. While everything works fine the problem is whenever I leave the keyboard and mouse intact even for one minute, the display turns off and change to select the screen of the user. 'Disable the display' and "put the computer to sleep" has been on 'never' and screen saver changed nothing but the problem still persists.

  Please provide the solution

  Hi Sam,

  Sorry for the late reply.

  I understand that when your computer is left idle, the select user screen appears.

  The issue can be caused if the power plan settings are incorrect.

  To get a better understanding of the issue, I want to know:

  1. What is the brand and model of your computer?
  2. You did it changes on your computer before this problem?

  To resolve the problem, try the following methods:

  Method 1: Troubleshooting to be able to run.

  The resolution of the problems of power check things as settings timeout of your computer, which determines how long the computer waits before turning off the display or enter the mode 'sleep'. These settings can help you save energy and extend the life of the battery in your computer.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-power-Troubleshooter

  After trying method 1, if the problem persists, try Method 2.

  Note: When you're done, restart your computer and check if your computer works fine. If the problem persists, try Method 2.

  Method 2: Change the screensaver settings.

  I suggest you follow also the suggestion given in the answer by Vijay B answered the

  May 14, 2013.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/disable-automatic-lock-with-Windows-7/1d45e806-6a8a-492C-A0C7-ac85b759ad66

  Please, try the above suggestions and we provide the information required so that we can help you.

• APEX 5. Dynamic action on the CHANGE event does not work after applying the filter on IR.

  APEX 5.

  Dynamic action for the CHANGE event does not work after applying the filter on IR.

  Event: Change, selection Type: jQuery Selector, jQuery Selector: td [header = 'abc'] entry

  Real action

  Selection type: jQuery Selector, jQuery Selector: td [header = 'abc'] entry, Action: run the Javascript Code

  Is TI WHEREAS behavior?

  I know, I can work around this problem by using the Refresh event and javascript, but I prefer DA and if possible Change event.

  Concerning

  mdyla

  mdyla wrote:

  It is, how to force them reallocate dynamic Action in the event of CHANGE of the input elements after refresh of IR region.

  Set the dynamic scope of the event action to Dynamics.

• How can I get rid of the 2nd line of signature with an email requested line under form after its creation in a widget

  So I created a widget or a hosted form, and after finishing to complete to have a single view of signing, he puts another section or area below which requires another signature and send an article I don't want to have there. It creates another page as well because my original signature line is down.

  Then... How can I get rid of the 2nd line of signature with an email requested line under form after its creation in a widget

  Hello

  By default the Widget to always an email and if you have not added field which, E-Sign would put a signature block (which consists of Email field) at the bottom of the document.

  Kind regards

  -Usman

• If I create a form using the free trial software, will I be able to use and access the form, after the trial period is over?

  If I create a form using the free trial software, will I be able to use and access the form, after the trial period is over?

  Yes, you can access the project that you created after the trial is over, but you need to back it up.

  Concerning

  Stéphane

• looking to purchase a copy of the elements after the trial. However, basket indicates platform: Windows. I need for Mac. Before I commit the activation code will work for the Mac. Impossible to find anywhere on the Web site to buy different versions.

  looking to purchase a copy of the elements after the trial. However, basket indicates platform: Windows. I need for Mac. Before I commit the activation code will work for the Mac. Impossible to find anywhere on the Web site to buy different versions.

  Hi Mljohno,

  If you search for items 14, go into products from Adobe, click on 'Buy' in front of the name of the product and use the drop down menus to specify Mac or Windows full version or upgrade.

  Best,

  Del