Determinations Server - installation of the Plugin

Similar Questions

• Installation of the Plugin NSX NSX 1.0.0.2032133

  After I install the plugin NSX and I restart the service and restrat the configeration I always get this message "installation at the next startup server will perform.  See attached picture

  Go to the Troubleshooting tab in the Configuration page of the vCO (on port 8283), click on the link to reset the current version, and then restart the Server service. This will force the Orchestrator of re - install all plugins and their packages. None of your existing stuff should be lost.

• installation of the plugin browser of battlefield 3 doesn't seem to work, but it is fine in Internet Explorer

  Whenever the game Battlefield3 Battlelog browser plugin is highlighted of installation due to a new version... it never installs right... after each single installation, he keeps offering the same version of the plugin to install...

  It was like that for me almost a year...

  I already tried to disable / enable all kinds of plugins that seem to be involved in it but not luck at all...
  I've seen other people complain about this as well...

  Thank you
  Andras Dorko

  Sorry, which isn't xound as a problem of Firefox support.
  
  Have you tried the Battlefield 3 for one?
  
  http://Battlelog.battlefield.com/BF3/Forum/

• Mirage Server installation fails: the server failed to register

  Quick history: the single server installation (Server 2012 R2 w / SQL Express 2012) using the version 5.5.05294 for all components. I have a dedicated domain service account and management group that has local administrator rights and I am connected using this account. I have disabled UAC completely. I've successfully installed the Mirage Management Server and the SQL database looks good. I installed the Console of Mirage as well and can connect to the server and load the license key.

  Here is the error I get when you install the Mirage server:

  

  It does not right 'Record VMWare Mirage to the Cluster of servers', which is located just past the step where it checks the version compatibility. If I go back to the Console, I've seen the Mirage Server installed, but gives the status of "Version mismatch". I am 100% certain that the version is the same (5.5.0.5294) and even when so far to control binary files and the SQL database to ensure that all list 05294 version:

  

  As you can see, the version is the same and I have already installed the management server:

  

  You look at the log of the server installation.

  Install using:

  msiexec /i INSTALLATION_PATH/l * v LOG_FILE

  Open the log file and look for errors after the message, it could lead you in the right direction (post the log of the excerpts here)

  Make sure that your Mirage account has the correct permissions in AD (KB 2105800 details most of them).

  Also, make sure that the user has read permissions to users and computers basic UO in AD.

• Problem with the installation of the Plugin to check the VSANS health

  Hello!

  After running - /usr/lib/vmware-vpx/vsan-health/health-rpm-post-install.sh

  I get this result:

  /usr/lib/VMware-VPX/VSAN-health/health-RPM-post-install.sh--force

  / usr/lib/VMware-vpx/Workflow/bin

  2015 05-15 T 21: 32:05.625Z development for install parameter: workflow.int.ser vice port

  2015 05-15 T 21: 32:05.633Z development for install parameter: workflow.int.jmx - port

  2015 05-15 T 21: 32:05.643Z development for install parameter: vpxd.int.sdk - por t

  2015 05-15 T 21: 32:05.650Z development for install parameter: vpxd.int.sdk tun nel-port

  2015 05-15 T 21: 32:05.658Z development for install parameter: rhttpproxy.ext.p ort1

  2015 05-15 T 21: 32:05.665Z development for install parameter: rhttpproxy.ext.p ort2

  {'vpxd_sdk_tunnel_port': ' 8089', 'rhttpproxy_https_port': '443', 'rhttpproxy_htt p_port': ' 80', 'workflow_service_port': ' 8088', 'vpxd_sdk_port': '8085', 'PASSWO RD': ", 'workflow_jmx_port': '19999'}

  2015 05-15 T 21: 32:05.673Z development for install parameter: syslog.ext.port

  2015 05-15 T 21: 32:05.682Z development for install parameter: vc.home.path

  2015 05-15 T 21: 32:05.690Z development for install parameter: vc.conf.path

  2015 05-15 T 21: 32:05.691Z health service firstboot VSAN has started

  2015 05-15 T 21: 32:05.702Z user %s already exists, creation to jump.

  2015 05-15 T 21: 32:05.710Z development for install parameter: rhttpproxy.cert

  2015 05-15 T 21: 32:05.710Z WARNING rhttpproxy.cert install parameters optimization I empty s

  Traceback (most recent call changed):

  File "/ usr/lib/vmware-vpx/firstboot/vsanhealth_firstboot.py", line 292, may n

  RES = vsanhealth_fb.get_rp_cert_info)

  File "/ usr/lib/vmware/site-packages/cis/firstboot.py", line 185, in get_rp_cer t_info

  digital footprint, ssl_trust, TCR = get_certinfo (rp_cert_file)

  File "/ usr/lib/vmware/site-packages/cis/tools.py", line 184, in get_certinfo

  f.readFile (cert_file)

  File "/ usr/lib/vmware/site-packages/cis/utils.py", line 1028 to readFile

  loErrMsg = localizedString (errMsg, file_name, e)

  TypeError: localizedString() takes at most 2 arguments (3 given)

  2015 05-15 T 21: 32:05.712Z health firstboot VSAN has failed

  Traceback (most recent call changed):

  File "/ usr/lib/vmware-vpx/firstboot/vsanhealth_firstboot.py", line 343, < mo dule >

  Main()

  File "/ usr/lib/vmware-vpx/firstboot/vsanhealth_firstboot.py", line 333, in may n

  If eInfo and eInfo.detail:

  UnboundLocalError: variable local "eInfo" referenced before assignment

  VMware-vpxd: your visit vpxd request administrative. process ID was 9301

  success

  VMware-vpxd: Certificate SSL VC does not exist, it will be generated by vpxd

  Pending database shipped to startup: success

  Running scripts before starting...

  VMware-vpxd: from vpxd of administrative request.

  success

  VMware-vpxd: waiting for vpxd to start listening to the requests on 8089

  Wait vpxd initialize: .the

  VMware-vpxd: vpxd has been initialized.

  Last login: Friday, May 15, 21:18:53 UTC 2015 on console

  Stopping VMware vSphere Web Client...

  Order of VMware vSphere Web Client.

  Last login: Friday, May 15, 21:32:20 UTC 2015 on pts/1

  From VMware vSphere Web Client...

  Waiting for VMware vSphere Web Client...

  running: PID:30348

  

  The suite - no buttons.

  As far as I understand it - there are a few problems with certificate.

  So, help me with troubleshooting, please.

  Thank you.

  Glad it worked! I managed to solve the rest of my problem get the plugin loaded as well.  Layout rhttpproxy.cert solved the problem with health-tr/min-post-install completed successfully.  But after you start the vmware-vsan-health service, health in the web client page loaded yet never buttons such as 'enable '.

  I checked /var/log/vmware/vsan-health/vmware-vsan-health-service.log and noticed it was spamming 'Could not open a session in VC, retry in 10 seconds' over and over again.  So I went digging in the python source in /usr/lib/vmware-vpx/vsan-health. I managed to understand that when you start the web service that hosts the plugin, it tries to connect to vCenter using own vCenter SSL certificate and the private key (rui.crt and rui.key) in/etc/vmware-vpx/ssl. On my VCSA, the permissions of that file looked like this:

  myvcsa: / etc/vmware-vpx/ssl # ls - la

  Total 28

  drwxr-x - 2 root cis 4096 Jul 20 05:00.

  drwxr-xr-x 14 root root 4096 21 Jul 04:05...

  -rw - 1 root root 3416 Apr 30 05:36 rui.crt

  -rw - 1 root root 1704 Apr 30 05:36 rui.key

  -rw - 1 root root 65 30 Apr 05:19 symkey.dat

  -rw - 1 root root 3343 Apr 30 05:36 vcsoluser.crt

  -rw - 1 root root 1704 Apr 30 05:36 vcsoluser.key

  Now, I knew that the health service was run as a local user called vsan-health. It so there's no way that he would be able to read these files.  Fortunately, I had a mostly vanilla VCSA I could compare with.  Here's what looked like the VCSA vanilla folder:

  myvcsa: / etc/vmware-vpx/ssl # ls - la

  Total 28

  drwxr-x - 2 root cis 4096 Jul 20 05:00.

  drwxr-xr-x 14 root root 4096 Jul 21 04:24...

  -rw - r - 1 root cis 3416 Apr 30 05:36 rui.crt

  -rw - r - 1 root cis 1704 Apr 30 05:36 rui.key

  -rw - 1 root root 65 30 Apr 05:19 symkey.dat

  -rw - r - 1 root cis 3343 Apr 30 05:36 vcsoluser.crt

  -rw - r - 1 root cis 1704 Apr 30 05:36 vcsoluser.key

  Notice the difference of the Group property on the associated files cert and change of 600 to 640 permissions.  When I saw that, I have also remembered seeing in the vsan firstboot script that the vsan-health user was added to the cis group.  As soon as I did my broken VCSA permissions corresponds to vanilla, the service has started and all this work began.  I guess the reason that my permissions were leech is a bug with the replacement of SSL scripts.  One of the first things I do on my vCenter is updating the SSL certificates with those customized PKI infrastructure.  I guess that process currently does not work quite right and live the permissions on files that is not replaced.

• InDesign CS6 spelling does not not after installation of the Plugin Blurb

  I am running Adobe InDesign CS6 Version 8.0 on OS X Yosemite Version 10.10.5 and installed the last Plugin Blurb (Blurb book creator CS6 v2.7.0.20d18s.dmg): http://www.blurb.com/apps/InDesign-Plugin/v2-download

  After installing the Plugin, I point out spelling CS6 InDesign no longer works. Spell check worked perfectly just before installing the Plugin.

  
  

  I see that my operating system does not appear in the list of Blurb Book Creator download (it goes only until Mac OS X 10.9).

  
  

  I created a layout without other problems (as far as I can tell) I just don't seem to not be able to run spell check.
  

  Any suggestions for how to fix this?

  Thanks in advance for any help.

  If someone else has the same problem, here is the solution (thanks to Grabzoo on a previous discussion forum):

  Open the paragraph Styles Panel, and then double-click one of the styles (i.e. [standard paragraph]). Click on the "Advanced character Formats" tab in the left navigation menu; Verify that the language is set to your preferred language (e.g. English: us.).

  Do this for all the styles listed, and then save your document. Run the spell checker and your problem should be solved.

  It worked for me.

  Thanks again for all your suggestions.

• "Internal server" installation for the results of the Quiz on Go Daddy

  Hello

  Not even sure if this is possible, so I turn to all of you smart people...

  Over the past day, I have been looking and trying to get this to work.  I have a Web site hosted on Go Daddy and would be delighted to welcome my productions their and the results of the quiz.  Of course, the productions work very well, but I can't seem to get the results of the quiz is displayed in the monitor.  I tried to put the PHP file in a few different places without success.  I'm pretty sure that PHP is enabled by default on Go Daddy but I must confess that I can barely spell PHP.  :-)

  Ideas and Suggestions are welcome!

  Thank you very much!

  OK...  I thought about it.

  #1-Oui, working to find a Go Daddy site.  No modifications are required on your Go Daddy site configuration.

  #2-my problem was that I had just downloaded the "internalserverreporting.php" to the root of my site.  I left the 'internalserverread.php '.

  #3-ensure that when you configure the "internal server location" in the Quiz results Analyzer that you point to the file 'internalserverread.php.

  

  I hope this post helps someone...

  Ed

• Installation of the plugin: product content not showing on Mac

  I try to install a Lightroom plugin, CC, but I can't view the contents of the packaging of Lightroom to get the actual plugin file when I try to add in Lightroom.  I can, however, view the file in the finder, as shown in the screenshot here. The top window is the view from the installation of Lightroom, and the bottom is the regular Finder on the Mac (OSX Yosemite 10.10.4/Lightroom CC) window

  Help?

  

  Hi lizav96077933,

  Please see the following link, it should be useful: How to add A plugin for Adobe Lightroom 5 | Lightroom fanatic

  Kind regards

  Tanuj

• Problem after installation of the plugin 1.3 for eclipse

  Hello

  I have windows XP and I had the Eclipse Helios installed before.

  I downloaded the new Plugin of Blackberry for Eclipce and (after a looot of tests), it has been has been properly installed, BUT when I opened there was NO BLACKBERRY FEATURES.

  I mean, no Blackberry in the top menu bar, no "new Blackberry project", etc.

  I looked for a solution in the forum, I found people who had the same problem with windows 7, but the solution did not work for me and I found people who have had this problem with XP with no. SOLUTION.

  I need to start working immediately.

  Help, please

  My mistake: i had not the Java JDK 6 in my PC...

  Now it s working

• Build the stop after the installation of the plugin

  I have some problems with my android build. My build is a failure, but I see no reason why it's a failure.

  the paper always stops after installing plugins. I tried several tests.

  I changed the syntax plugins on my config files, I try to remove the config plugin, but the build is always a failure.

  (Sorry for my English )

  This is my config file:

  <? XML version= "1.0" encoding= ' utf - 8'? >
  "" <widget id= 'com.exaprint.fr.exaprint' ios-CFBundleIdentifier= "com.exaprint.fr.exaprint" android-packageName= "com.exaprint.fr.exaprint" version= "3.2.5" android-versionCode= "30020508" = "en" xmlns defaultlocale= 'http://www.w3.org/ns/widgets"" " xmlns:cdv="http://cordova.apache.org/ns/1.0""">

  <name> MyApp < /name>

  <description>

  An example Apache Cordova application that responds to the deviceready event.

  < /description>

  "" <author send= "[email protected]"" " href= "http://cordova.io""">

  Team Apache Cordova

  < /author>

  <engine name= 'android' spec= "4.0.0" / >

  <engine name= 'ios' spec= "3.9.1" / >

  <engine name= 'windows' spec= "3.8.1" / >

  <engine name= "wp8" spec= "3.8.0" / >

  < value ofpreference name= ' phonegap-version ' ='cli - 6.3.0' / >

  <preference name= "full screen" value= "True" / >

  <preference name= "KeepRunning" value= "False" / >

  <preference name= "ShowTitle" value= "False" / >

  <preference name= "InAppBrowserStorageEnabled" value= "False" / >

  <preference name= "SuppressesIncrementalRendering" value= "True" / >

  <preference name= "Orientation" value= "portrait" / >

  <preference name= "SplashScreen" value= "screen" / >

  <preference name= "SplashScreenDelay" value= "10000" / >

  <preference name= "splash-screen-duration" value= "4000" / >

  <content src= "index.html" / >

  <plugin name= "cordova-plugin-whitelist" version= "1.0.0" / >

  <plugin name= "cordova-plugin-splashscreen" version= "2.1.0" source= "MNP" / >

  "<=" cordova-plugin-inappbrowser " plugin name spec="https://github.com/apache/cordova-plugin-inappbrowser.git"" " / >

  ' <plugin name= "cordova-plugin-websql" version= "1.0.0" spec= "https://github.com/MSOpenTech/cordova-plugin-websql.git"""/ >

  "<="com.pushwoosh.plugins.pushwoosh" plugin name spec="https://github.com/Pushwoosh/pushwoosh-phonegap-3.0-plugin.git"" " version="3.6.9" / >

  "<= ' cordova-plugin-network-information ' plugin name spec="https://github.com/apache/cordova-plugin-network-information.git"" "/ >

  "<=" cordova-plugin-keyboard " plugin name spec="https://github.com/driftyco/ionic-plugins-keyboard.git"" "/ >

  "<=" cordova-plugin-fullscreen " plugin name spec="https://github.com/mesmotronic/cordova-plugin-fullscreen.git"" "/ >

  ' <plugin name= "cordova-plugin-apprate" version= "1.2" spec= "https://github.com/pushandplay/cordova-plugin-apprate.git""" / >

  <access original= "" * " browserOnly="true" / >"

  <access original= "*." pushwoosh.com' / >

  <access original= "" Tel: * ' launch-external= "Yes"/ > "

  <access origin= "mailto:*" launch-external= "Yes"/ >

  <allow navigation href= "" * ' / > "

  <allow-intent href= "" * ' / > "

  "<allow-intent href="http://*/*"" " / >

  "<allow-intent href="https://*/*"" " / >

  <allow-intent href= "" Tel: * ' / > "

  <allow-intent href= "" sms: * ' / > "

  <allow-intent href= "mailto:*" / >

  <allow-intent href= "" geo: * ' / > "

  <platform name= "android">

  <preference name= "permissions" value= "none"/ >

  <preference name= "android-build-tool" value= "gradle" / >

  <allow-intent href= "' market: * ' / >"

  <preference name= "EnableViewportScale" value= "true" / >

  < content ofpreference = "width = device-width, original scale = 1.0, maximum scale = 1.0, minimum scale is 1.0, scalable user = 0, target-densitydpi = PPP device" name= "viewport" / > "

  <icon density= "ldpi" src= "res/android/icon/drawable-ldpi-icon.png" / >

  <icon density= "mdpi" src= "res/android/icon/drawable-mdpi-icon.png" / >

  <icon density= "hdpi" src= "res/android/icon/drawable-hdpi-icon.png" / >

  <icon density= "xhdpi" src= "res/android/icon/drawable-xhdpi-icon.png" / >

  <icon density= "xxhdpi" src= "res/android/icon/drawable-xxhdpi-icon.png" / >

  <icon density= "xxxhdpi" src= "res/android/icon/drawable-xxxhdpi-icon.png" / >

  <splash density= "ldpi" src= "res/android/splash/fr/drawable-port-ldpi-screen.png" / >

  <splash density= "mdpi" src= "res/android/splash/fr/drawable-port-mdpi-screen.png" / >

  <splash density= "hdpi" src= "res/android/splash/fr/drawable-port-hdpi-screen.png" / >

  <splash density= "xhdpi" src= "res/android/splash/fr/drawable-port-xhdpi-screen.png" / >

  <splash density= "xxhdpi" src= "res/android/splash/fr/drawable-port-xxhdpi-screen.png" / >

  <splash density= "xxxhdpi" src= "res/android/splash/fr/drawable-port-xxxhdpi-screen.png" / >

  < /platform>

  <platform name= "ios">

  <preference name= "Orientation" value= "portrait" / >

  <allow-intent href= "" itms: * ' / > "

  <allow-intent href= "" itms-apps: * ' / > "

  <icon height= "57" src= "res/ios/icon/icon.png" width= "57" / >

  <icon height= "114" src= "res/ios/icon/[email protected]" width= "114" / >

  <icon height= "40" src= "res/ios/icon/icon-40.png" width= "40" / >

  <icon height= "80" src= "res/ios/icon/[email protected]" width= "80" / >

  <icon height= "50" src= "res/ios/icon/icon-50.png" width= "50" / >

  <icon height= "100" src= "res/ios/icon/[email protected]" width= "100" / >

  <icon height= "60" src= "res/ios/icon/icon-60.png" width= "60" / >

  <icon height= "120" src= "res/ios/icon/[email protected]" width= "120" / >

  <icon height= "180" src= "res/ios/icon/[email protected]" width= "180" / >

  <icon height= "72" src= "res/ios/icon/icon-72.png" width= "72" / >

  <icon height= "144" src= "res/ios/icon/[email protected]" width= "144" / >

  <icon height= "76" src= "res/ios/icon/icon-76.png" width= "76" / >

  <icon height= "152" src= "res/ios/icon/[email protected]" width= "152" / >

  <icon height= "29" src= "res/ios/icon/icon-small.png" width= "29" / >

  <icon height= '58' src= "res/ios/icon/[email protected]" width= "58" / >

  <icon height= "87" src= "res/ios/icon/[email protected]" width= "87" / >

  <splash height= "1136" src= "res/ios/splash/Default-568h@2x~iphone.png" width= "640" / >

  <splash height= "1334" src= "res/ios/splash/Default-667h.png" width= "750" / >

  <splash height= "2208" src= "res/ios/splash/Default-736h.png" width= "1242" / >

  <splash height= "2048" src= "res/ios/splash/Default-Portrait@2x~ipad.png" width= "1536" / >

  <splash height= "1024" src= "res/ios/splash/Default-Portrait~ipad.png" width= "768" / >

  <splash height= "960" src= "res/ios/splash/Default@2x~iphone.png" width= "640" / >

  <splash height= "480" src= "res/ios/splash/Default~iphone.png" width= "320" / >

  < /platform>

  < /widget>

  I'made a local build using cordova and my build to succeed regardless of the config file.

  What?

  In this case, everything you are breast-feeding to BMPS, it is simply not what it expects. Most likely, your directory structure is incorrect (for example indexes and the config in different directories) or you download a project of Cordova.

  Could you please make your online zip file and post the url here?

• installation of the plugin

  Hello, you can install the zen coding plugin?

  Yes - in general, Edge Code is compatible with any extension that works in parentheses (see the list of media extensions).  To install an extension, follow these steps:

  1. Download the extension and unpack it
  2. Select "help > show file Extensions."
  3. Place the extension file in the folder "user".  (There should be a "main.js" file located inside the extension, so the structure is like this: extensions/user /main.js).
  4. Quit and restart the application supports

  -Peter

• installation of the plugin Manager

  I already install the feeder extension in my system and why his watch is not in Photoshop or other programs in the menu windows extension I have to do for this.

  Salvation Jones,

  See a related discussion on the same topic: Re: Extensions CC2015 gone

  I heard the team there are some problems with the Add-ons and the command line tool, and the team is trying to solve. I'll let you know as soon as I have an update.

  See Adobe Exchange for official communication on the extensions Manager.

  Thank you

  Devendra

• Problem with siebel-Siebel connector for OPA 10.2 determinations-Server

  Is anyone having a problem with this? We have completed the installation and everything works except siebel-determinations-server.
  We can see the server and adminsmoketest of the view inside Apache Tomcat Manager WSDL.
  However, when using the following address in our browser - http://localhost:9000 / siebel-determinations-Server/SOAP? WSDL
  We get a HTTP: error state 404 - the requested resource () is not available.
  
  Any thoughts?
  Thank you
  Allan
  
  Published by: Gibson on February 10, 2011 16:11

  Allan,

  the message "HTTP: error state 404 - the requested resource () is not available." means that the siebel-determinations-server is not deployed successfully in your tomcat.

  Check that the file ' siebel-determinations - server.war "in the directory webapps and check the tomcat records errors.

  See you soon
  Frank

• I bought a new camera. I use photoshop cs5.   I need to install a plugin of ACR.  The plugin does not work?

  Just bought a new camera.  I use Photoshop cs5.  I had to install an ACR plugin I made. I did the installation but the plugin will not work.

  Devices supported by Camera Raw

  Applications of camera Raw compatible Adobe

  Troubleshooting of Camera Raw | Photoshop, Photoshop Elements

  Mylenium

• Determinations-Server multiple version

  Hello
  
  We use Haley determinations Server (9.4) and plan to upgrade the OPA determinations-Server (10.2). Is there any problem with hosting server of determinations of Haley (HDS) and OPA 10.2 determinations-server on the same IIS server?
  
  Recently, I welcomed HDS on the same IIS (7.0) as determinations-server and since then, I get the following error with OPA 10.2 determinations-server:
  
  HTTP 403.14 - forbidden error
  
  The Web server is configured to not list the contents of this directory.
  
  Note: Service Web HDS work and am able to access the WSDL file.
  
  Please let me know how I can solve this problem.
  
  Thanks in advance,
  Aditya

  There is no problem with running 9.4 server and 10.2 in the IIS even determinations.

  There is a known bug with the determinations 10.2 .NET server where you are not re-directed to the homepage of determinations-server on some versions of IIS. This will not stop the server of determinations of work, but can be a little annoying trying to see the deployed rulebases.

  Fortunately, there is a simple work around. The normal URL is

  http://:/determinations-server/
  

  If the URL above does not work, use

  http://:/determinations-server/default.aspx
  

  For example, when I was testing on port 80 on my local machine, I used

  http://localhost/determinations-server/default.aspx
  

  Published by: frank.hampshire on October 12, 2011 09:03