Satellite U920T - touchscreen disabled when viewing is slipped on

Similar Questions

• Satellite U920T - touchscreen stopped working

  My touchscreen as stopped working. It worked very well, screen fell asleep, and when I woke up it to the top of the touch screen had ceased to function. Not sure if I may push or hit something to lock or disable the touch screen?

  There is a function key to lock the touchpad (mouse pads) on the keyboard, but nothing obvious on the screen.
  Thank you

  If nothing helps, try to reinstall the HARD drive recovery image and test it with the factory settings.

• PP - How can I disable "split view" when moving clips on the timeline?

  In Premiere Pro, whenever I have move some clips, this split view appears and for some reason that it makes my computer stall for 2 minutes each time. Imagine how long it takes to make a video then!
  The program does not crash, the only thing I can't do when it stalls is to get a preview of the video (reading timeline)

  Nothing happens when I press play, up to 2 minutes later.

  

  Many times this error pops up when it starts to work again:

  

  Maybe disable split view will fix it, or maybe there's a more legitimate solution?

  To turn off this display, disable the Composite preview at Trim

  

  MtD

• Touchscreen doesn't work is not for the Satellite U920t - 10 p

  Please read this completely before you answer with your copied and pasted answers.

  My touch screen lets you stop work, but was still attached with a reboot of the machine.
  Now it doesn't work at all and * I've tried everything posted elsewhere in this forum *.

  I tried to change the settings for battery power, try to update the drivers (not exactly who is right though!).

  Please can anyone help because it is a new machine and it's very frustrating.

  Serial number: 7D054633H
  Model: Toshiba Satellite U920t - PSUL1E-01900JEN 10 p

  Thanks in advance.

  > Please read this completely before you answer with your copied and pasted answers.
  IMHO, I n t think that someone here in the forum doesn t read the messages before playback
  I hope that this part of your post is just the result of frustration due to the malfunction of the notebook...

  Back to your question:
  > I tried everything already posted elsewhere in this forum.
  and what does this mean? What have you tried exactly?
  Have you given zero and plant control panel?

  If not try and in the case where this help not the laptop's hardware could be affected which requires new checks of material by an authorized

• A few problems with the Satellite U920T-100

  Hi guys,.

  my girlfriend ordered a Toshiba Satellite U920T-100 about three months ago and she had problems with it since. We're not quite sure what causes because they seem to happen randomly.

  The questions are:
  -It starts, but it freezes at the Win8 connection with a blue screen (a rather hot blue, no blue screen of death)
  -It starts not at all, only after a few attempts
  -It will not stop
  -It freezes all by organizing files (for example copy of files from A to B, but not yet large amounts of files)

  New: these questions seem to be completely appearing randomly, I wasn't able to reproduce them in any way.

  Also: WLAN connectivity is really bad.
  The laptop is not able to find networks, while my laptop has no problem with it.
  And when he finds them and connect, the connection be lost - once again: no idea why.

  That surprises me the most, because in tests and comments that I've read that connectivity has been praised everywhere.

  I have reset factory?
  Run through some specific tests?
  Or is is hopeless, because there are so many problems with it?

  I'd appreciate your help!

  Hello

  > I should factory reset it?

  I think you should do that because the issue described can be related to system problems, but also hardware problem (HARD drive for example). The resumption of the factory allows you to check if its software or hardware related problem.

  Usually, all the problems of software (System) could be solved by the recovery process. Hardware problems would continue.

  From my point of view, the recovery of the system is the first step, you should try to solve the problem.
  In case this is not enough, a hardware problem (RAM or HARD disk) is possible, and given that the laptop is still under warranty, I recommend you contact the service to check the unit.

  Hope my advice might help you a bit

• A few questions on the Satellite U920t-100

  Hello

  I bought the Toshiba Satellite U920t-100. for this tablet, I have a few questions. simple install windows 8 Professional on the current installation?
  what driver, software installed and other toshiba? are the problems with it?
  There is something about a pro installation win8?

  What of the screen when I run the u920t with an external monitor?

  I want to buy the Toshiba PA3927E - 1PRP Dynadock U3
  is it a good idea for it?

  Best regards

  All these questions different so let's start with first.

  > simple I can install windows 8 Professional on the current installation?

  Read this FAQ from Toshiba document. It provides all the answers and a detailed instruction.
  [How to change Windows 8 for Windows 8 Pro | http://aps2.toshiba-tro.de/kb0/HTD2B03F20002R01.htm]

  > what driver, software installed and other toshiba?
  Windows 8 uses the same drivers as Pro

  > What about the view when I run the u920t with an external monitor?
  What do you mean exactly? You can use internal display, external display or both at the same time

  > I want to buy the Toshiba PA3927E - 1PRP Dynadock U3
  > which is a good idea for that?

  Why not. Dynadock U3 supports own GPU so you can use 3 monitors at the same time

• Satellite U920T - need help to turn on the WiFi

  Hello!

  I have a laptop Toshiba Satellite U920T.
  My OS is Windows 8.1 x 64 with all updates.
  There is a challenge with wireless which started after I put in place a flight on charm bar Mode and back fired.

  When I disabled the flight Mode, the switch wireless of charm bar is remained handicapped as shown on the screenshot (sorry, all the screenshots are in Russian, but if something is not clear I'm ready to explain)
  http://bit.LY/12HGayL
  The adapter in Device Manager is Normal
  http://bit.LY/1Gd2ygA
  It is the latest version of the driver installed
  http://bit.LY/1Itn4NO
  The Windows Network Diagnostics Wizard detects that the wireless is turned off.
  http://bit.LY/1w84plz
  When I try to enable wireless using the utility of the farm, he pointed out that I should turn the WiFi hardware button
  http://bit.LY/1ItncNd
  But my laptop is not any material for the WiFi button. Only hokey, but it comes to establish a flight Mode.

  Need your help.

  Sincerely,
  Vadim

  Guess, what, I think that there is a problem between the driver and the system and consequently the system reports that the WiFi network is DISABLED.

  I recommend you to uninstall the Intel Wlan Device Manager driver.
  Then, you must restart the laptop.
  Please perform a complete shutdown (no hybrid closed, standby, etc.)

  After the new reboot, install the Wlan driver and reboot once more.
  It would be really interesting to know if you can activate the WLan after this short driver installation procedure.

• What tool or driver handles affect installation screen of the Satellite U920T

  Hello

  In the list of drivers available for laptop Satellite U920T, who manages the installation screen stylus and touchscreen?

  See you soon
  Alfred

  A Toshiba software tool to be installed to win 8 and 8.1 of Windows's system of Toshiba driver.

  But win 8 and 8.1 Win provides some own drivers to control the capacitive touchscreen of 10 fingers.

• Satellite U920T - duplex cam + touch screen + win button does not work

  I have the problem as the touch screen + frontal camera + camera rear windows on the screen button do not work.

  I tried to install the drivers to display/graphics but that has not helped.

  I bought this laptop from Saudi Arabia and it is still under warranty but I am out of country, so I can't ask the warranty as well.

  someone please fix this and tell me the solution, or tell me what I need to do?

  Help will be really appreciated.
  some details on my laptop:

  Toshiba Satellite U920T-B919.
  Windows 8.1 updated 64-bit.

  Thank you

  Since you mentioned different problems with your laptop, I think that in this case its recommended to get the laptop back to factory settings just to check if all these problems are related to the problem of system.

  Regarding the webcam: Windows 8/8.1 already contains the webcam drivers and therefore additional webcam driver installation isn t possible. Extra webcam driver is not simply.

  From my point of few smells of any description as a bit of a problem of material, the upper part of the slide where the touch screen is part of.
  The key win as well that the two cams are located and there are probably some lose the connection between the two parties (touchscreen and keyboard)

  Anyway, as I said more top, its recommended to recover the laptop to factory settings just to make sure that the system isn t the troublemaker.
  In case of hardware problems, you must get in touch service available in your country.

• Satellite U920t curtains blackout - lights blinking but the screen is completely released

  Hi everyone, I really would like to get help here.

  My relatively new Satellite U920T - 10G turns off without reason. I turned it on as Tablet and when I pulled the keyboard, he became all black. At first, when I've quand j' ai cache hidden keyboard the screen just work again but now it just does not in any case (even though I see its on!) IAM I must be missing something as happened within two months Ive been using it.

  Thank you in advance!

  ClaudiaR

  Hi Claudia

  I n t have this machine and cannot say what may be the problem. Try to roll back the OS to earlier time when he was working just to see if this will help. If this is not the case, try to reinstall the OS using recovery image installation and test with the factory settings.

• Cannot install Vista SP2; 'upgrade' disabled when I try and re - install by KB958044

  Hello

  After three days of struggle with trying to get Vista Ultimate (purhcased at the United States) SP2 update, and several failures of various updates automatically downloaded from Windows Update: I finally found and read

  http://social.answers.Microsoft.com/forums/en-us/VistaInstall/thread/09c291bf-3868-4DFA-8004-139ec8018aa1

  MS response has been a link to: http://support.microsoft.com/kb/958044

  But when I try to follow the instructions in KB958044: 'upgrade' is disabled.

  I don't really wish to throw three days work of re - install my programs, tweak the settings, etc.

  Thank you, Bill Woodruff Bill Woodruff

  Hi Bill Woodruff.

  Because the standalone SP2 package failed with the error: '0 x 80070490', you can try to run Checksur (KB947821) to address corruption in the manifest of component maintenance (EC) and try to install SP2 Standalone Package.

  To run Checksur (KB947821) follow the mentioned below as follows:

  (1) download and run the system update by the following article preparation tool: KB947821. Description of the system update tool for Windows Vista and Windows Server 2008: http://support.microsoft.com/kb/947821

  (2) put the computer in Cleanboot before installing the stand-alone Package of SP2:

  To perform the cleanboot, refer to:

  Click Start, type msconfig in the search box and press ENTER. If you are prompted for an administrator password or a confirmation, type the password, or click on continue. On the general tab, click Selective startup, Selective Startup.Under, clear the check box load startup items. Click the Services tab, select the hide all Microsoft Services check box, and then click Disable all. Click OK.

  How to perform a clean boot procedure to determine if background programs are interfering with a game or a program that you currently use: http://support.microsoft.com/kb/939671

  (3) try to install the stand-alone Package for Windows Vista SP2.

  (4) after Installation of SP2, put the computer in Normal mode:

  Click Start and type msconfig in the box start the search. On the general tab, select "NORMAL STARTUP". Click on apply, then OK. When you are prompted, click on restart.

  However if SP2 fails to install again, then you can have make a repair or Installation upgrade Inplace of Vista to install SP2 as mentioned in article KB958044 after uninstalling SP1.

  During the Upgrade Installation process, you will get the options go online to get the latest updates for installation and do not receive updates for installation. If you choose the option to go online to get updates, then it tries to download updates for the installation process, the windows updates required for Installation, including driver updates and it won't include all the latest Service Packs for Windows Vista.

  If you get an error "upgrade is disabled" when you try the Inplace upgrade, it may be due to a version of Windows Vista with Service Pack 1 installed, you can not upgrade by using media that does not Service Pack 1. If you have a drive without SP1 and SP1 is installed on the computer as an update, you need to maybe uninstall SP1 first and then start the Installation of upgrade or you can arrange a full disc with SP1 to make Installation of upgrade by using the product key came with your upgrade disc.

  For more information, please visit the link: http://support.microsoft.com/kb/951247

  If you try to uninstall SP1 to upgrade Installation, you can follow the mentioned below as follows:

  1) click Start, type Appwiz.cpl in the Start Search box, and then click Appwiz.cpl in the list programs.
  (2) If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  3) click View installed updates. Click service (KB936330) package you want to uninstall, and then click on uninstall.

  For more information, please visit the link: http://support.microsoft.com/kb/948537

  Hope this information is useful.

  Let me know if it worked.

  With regard to:

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• All my songs on my iPhone are disabled when trying to import into GarageBand

  All my songs on my iPhone are disabled when trying to import into GarageBand.

  All of these songs in my music tab before you do my songs in GarageBand are inaccessible.

  The songs are disabled and not able to add or import them

  If anyone can help with this.

  Thanks for the help in advance

  What kind of songs do you have in your Music.app on the iPhone?  You can use any song in GarageBand, with digital rights not assigned, no music Apple or bought songs that have the file protected AAC audio file type. Alos, the songs must be stored locally on your iPhone. If you use iTunes game, download the songs first for the iPhone, before trying to use in GarageBand.

• I can't find Add-ons that will be disabled when I update to Firefox 11.0

  I received a message from the installer that four of my extensions will be disabled when I install Firefox 11.0. I tried to find these updates of the extension, but could not.

  The XULRunner extension is seen as a malware, so you probably better should remove this extension of your current configuration.

  • [743526/questions/743526]
  • [749007/questions/749007]

  Java Console extensions are not necessary.
  
  You only need the extension of the Java Console (Tools > Modules > Extensions) If you want to check and debug Java applets.
  
  You can uninstall and remove extensions of the Java Console, you do not need to run Java applets.

  See:

  • http://KB.mozillazine.org/Java#Multiple_Java_Console_extensions

  There should be an update to the Norton toolbar that is compatible with Firefox 11 (do not know Firefox 12 which will be released in the coming days, probably tomorrow, for some limited users.

  • http://community.Norton.com/T5/Norton-Internet-security-Norton/Firefox-11-support-for-Norton-toolbar/TD-p/679043

• Satellite Pro A300 freezes when on the internet

  Satellite Pro A300 freezes when on the internet & the only way to turn it off is to take out the battery. Bought new Dec 2010 & is under warranty - suggestions?

  Hello

  have you tried to update drivers Lan (wlan)? What browser do you use? I guess, the Internet explorer, try firefox or opera. Also, your computer may be infected with the virus, or blocked by the firewall. Have you installed software before it starts? Is this ok when you bought it? I ask you too, because you do not have a lot of information.
  It is especially the driver, software problem.

• Linux on satellite U920T

  Hello

  I am considering the purchase of a new laptop (Toshiba Satellite U920t). Does anyone know, if it is consistent with recent distributions of linux (Ubuntu-based)? Is it possible to find the detailed material (model wifi, BT model,...), which can help to decide?

  Thanks for all info

  Hello

  I am writing this reply on a U920T-109 under Ubuntu 64 bit 14.04.
  I had an EFI problem that looks like other models - Ubuntu bootable EFI-binary do not find after successful installation.
  It's all in fact easily solved by copying the native binary file & folder more generically called those.
  Question is can be avoided by setting the boot to the CSM mode if you want to stay on the easy way :) But do it BEFORE installation to avoid confusion between the error message during startup.

  One of the above is complete, the device starts and works fine in Ubuntu 14.04.

  Webcam WLAN, Bluetooth, touch screen, mouse works fine.
  Keyboard shortcuts work in part.
  Brightness not possible to order in a standard installation, but should be possible to operate by use of a boot argument (acpi_backlight = vendor).

  Overall, I see no reason why you make a U920T a great Linux-PC.

  See the output of lsusb and lspci below. Please keep in mind that no matter what U920T you watch may slightly differ in specifications and features!