Problem after installation of the plugin 1.3 for eclipse

Similar Questions

• InDesign CS6 spelling does not not after installation of the Plugin Blurb

  I am running Adobe InDesign CS6 Version 8.0 on OS X Yosemite Version 10.10.5 and installed the last Plugin Blurb (Blurb book creator CS6 v2.7.0.20d18s.dmg): http://www.blurb.com/apps/InDesign-Plugin/v2-download

  After installing the Plugin, I point out spelling CS6 InDesign no longer works. Spell check worked perfectly just before installing the Plugin.

  
  

  I see that my operating system does not appear in the list of Blurb Book Creator download (it goes only until Mac OS X 10.9).

  
  

  I created a layout without other problems (as far as I can tell) I just don't seem to not be able to run spell check.
  

  Any suggestions for how to fix this?

  Thanks in advance for any help.

  If someone else has the same problem, here is the solution (thanks to Grabzoo on a previous discussion forum):

  Open the paragraph Styles Panel, and then double-click one of the styles (i.e. [standard paragraph]). Click on the "Advanced character Formats" tab in the left navigation menu; Verify that the language is set to your preferred language (e.g. English: us.).

  Do this for all the styles listed, and then save your document. Run the spell checker and your problem should be solved.

  It worked for me.

  Thanks again for all your suggestions.

• Problem after installation of the uniblue registry booster

  After installation, I started to make a request to make changes to this computer to yahoo and google bars of tools, then adobe who, most or all it's demand for the flash player to make changes to this computer. to do this, these pop-up windows asking constantly especially when change page or just read a. the toolbaars can ask once, but takes three clicks to accept the order, adobe flash player allow takes 5 clicks stops and then restarts and continues until I shud turn off the PC. Can anyone help?

  Hello

  Firstly uninstall the UniBlue - Panel configuration-programs and features or check with
  UnIBlue support for uninstallation methods.

  ----------------

  Then use the system restore BEFORE you uninstalled UniBlue which will ensure
  None of this is left in effect on the system.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  I hope this helps.

• 650 HP laptop Windows 7 64-bit boot problem after installation of the graphics driver

  I bought the HP 650 laptop which came with Suse Linux.

  I installed 64-bit Windows and tried to install the corresponding graphics driver:

  High definition (HD) of Intel Graphics Driver

  as indicated in the list of drivers for Windows 64-bit here:

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=5225013&...

  After installing the driver asked me to restart the computer and after the reboot, boot, Windows boot after displaying the Windows logo on black background the computer restarts again before you boot into Windows.

  After this crash to start a startup repair is suggested and I can complete the restore of the system that allows me to connect to Windows but I have not installed display drivers and things like Aero do not work.

  I tried several times and re - install drivers and had the same problem after each attempt.

  Help, please.

  It's quite a few updates failed.  This can be linked to the issue, but we don't know really until the update problem is resolved.

  Read this document to Microsoft as it addresses this particular error.  It also has various tools to try in case the first option does not correct the problem.

  You can also try the Windows Update troubleshooting utility included in Windows 7.

  Go to start > Control Panel > find and solve the problems under system and security > fixed problems with Windows Update under system and security.

  Let me know what happens.

• Re: Satellite A505-S6040 - strange problem after installation of the NVIDIA driver

  Hello, first of all sorry for my bad English, but ill try to explain myself as best I can.

  I have a Toshiba A505-S6040

  I like 2 months

  My problem is that when I start the laptop and go to the desktop theres a certain point that stop loading... and it gets freeze here until I have to reset manually... (I can go trough well safe mode).

  I don't know if that has soemthing to do with him... but I downloaded and install a new driver from nvidia website. After trying several days, I noticed that there were a few problems, and so I changed it again drivers from the Toshiba web page.

  Well 2 days this is well... I might do normally...

  OK, I decided to use the recovery tool fromToshiba, but the same problem happened while isntallin drivers se... I don't know if it was coincidence, but just after it install drivers from nividia it just stop working again... it froze again... and now it won't let me start with an account , because it gets has frozen afe mode, only I can access my laptop...

  one thing I tried was unisitallin the drivers nvidia in SafeMode... and try to start the laptop... it worked... or at leat is not trapped, but since I made the recovery of Toshiba it won't let me start the session.

  I have really no idea what could it be... the grpahic card?

  Thank you.

  Hello

  > I don't know if that has soemthing to do with him... but I downloaded and install a new driver from nvidia website. After trying several days, I noticed there were a few problems and so I
  > changed drivers again

  It looks like a card driver from nvidia.com graphci causes freezing. In addition, it is not recommended to only use not pre-tested by Toshiba driver. Toshiba drivers are modified to support protection against overheating. So, use only the drivers of Toshiba driver page.

• Log on problem after installation of the sp3

  Hi there forgive me if this is old news, but I just bought an old laptop for children. The seller has installed xp pro top with IE 8.

  I installed the latest java, W. Media Player. I had a browse through updates and he said that auto updates can not be read if my system is up to date. So I thought that I should install SP3. Once this is done I did the reboot and start-up of the machine re I got the newspaper of the administrator on request of password. When I bought this machine and it works, he never requested a password and went directly to the screen, probably because it was only a single account. the seller told me that he had installed a hard drive cool and a new copy of XP pro. There is a sticker on the back of the machine activation key.

  I tried many combinations of passwords, including the sellers name, leave blank and just pressing ENTER. tried Ctrl alt del all resulted in nothing.

  I contacted the seller and he said that he never put a password and therefore cannot (or will not help) I looked on the web for some ideas, including starting in safe mode, but the info it says it will ask for a password, but I am. I am now locked out of my machine. Help, please. Thank you

  On Monday, April 7, 2014 21:12:58 + 0000, DeanChaytor wrote:

  On Monday, April 7, 2014 20:29:13 + 0000, DeanChaytor wrote:

  Hi there forgive me if this is old news, but I just bought an old laptop for children. The seller has installed xp pro top with IE 8.

  If I bought a used computer, no matter who previously owned the
  first thing I could do with it would be to reinstall the operating
  system itself. You don't know how the computer has been maintained,
  which has been improperly installed, what's missing, what virus and
  There may be spyware, etc. I would not live with someone
  other errors and problems, possibility of kiddy p0rn, etc. and I
  would not recommend anyone else to do.

  Your choice of course, but in my opinion, you're playing with fire if you
  do not reinstall Windows properly.

  Thanks for the reply.

  You are welcome. Happy to help you.

  To do a clean install, what I have to buy a new version or I can just a xp pro disc and reuse the key at the back of the machine, provided that they are ok.

  If you have a product key on a sticker, it's an OEM version. You can
  use the disc to a friend, if the sound is also OEM. Try to find a friend with the
  same brand of computer.

• See 4.5 SSL fails after installation of the certificate

  I have a problem after installation following the steps described in the VMWare KB (and a bunch of other places) a certificate is currently working on an assessment of view 4.5

  I set up the environment and everything worked without problems.  Then I installed a certificate using the keytool and the steps described above, ssl connections ceased to work.  The admin page would be just a moment and my client view (currently on trial with the OS X client) would also expire during an attempt of SSL connections.  I had previously enabled connections not secure so that both connections use http still operate.

  The only difference in my SSL import procedure, it's that I signed the certificate using our AD CA.  I imported the complete certificate chain as a .p7b file and keytool complained that he did not trust my CA, (I said yes to import in any case).

  After this issue, I even tried to go back to the original signed cert free by removing the key file and the file locked.config and SSL still does not work.

  Looking through the logs of the events on the server, there is no error SSL and the view admin page itself don't report problems with the server.

  The only other reference to a similar problem, I have seen on this subject is another post on the forums, but it appers that issue was because the server was also the Wyse report server running on this issue, my server is running anything else that the display manager, I do not use a security server just one server.

  Hello

  > I had previously enabled connections not secure so that both connections use http still operate.

  The option ' require SSL for client connections and Administrator display: "is common for the customer and Admin UI connections.

  Because you have disabled this option, only the connections non - ssl will work for both.

  Connect to youyr Admin UI by using http://serverfqdn/admin/ and enable this setting and restart the login server.

  -Noble

• Installation of the Plugin NSX NSX 1.0.0.2032133

  After I install the plugin NSX and I restart the service and restrat the configeration I always get this message "installation at the next startup server will perform.  See attached picture

  Go to the Troubleshooting tab in the Configuration page of the vCO (on port 8283), click on the link to reset the current version, and then restart the Server service. This will force the Orchestrator of re - install all plugins and their packages. None of your existing stuff should be lost.

• After installation of the latest version of firefox on the homepage still says that I don't have the latest version

  After installation of the latest version of firefox and I use the new icon on my desktop, it always says that I don't have the latest version. Installation will correctly

  It - http://www.google.com/firefox - is the old Page to start Firefox used by the Firefox 3.6 and earlier versions of Firefox, I do not think that it is maintained by Google.

  From version Firefox 4, Firefox uses a 'local' with the address Start Page of Subject: House. It looks like the old start Page, but this isn't exactly the same thing.

• Does not start after installation of the graphics driver

  After installation of the graphics driver from Nvidia NVS 140 m on the new installation of XP Pro SP0, black screen on reboot. All solutions?

  If the minimum driver was SP2, then you must have installed. I recommend that you have installed SP3 so that all the latest patches and security patches are in place.

• Windows not loading after system reboot after installation of the last security update.

  Windows not loading after system reboot after installation of the last security update. Have you tried last known good Configuration, Safe Mode, neither of her works.

  No matter which option to choose, it comes to me to the BIOS boot screen after 5 seconds in loading Windows.

  Running Windows Vista 32 - Bit with SP2 installed system. 2 GB OF RAM. Intel G31 Mobo.

  Dated this February 11, 2010.

  I managed to restore my Windows to previous restore point, using the CD of Vista to start, and then select repair Windows. I hope this helps.

• Slimware download files can be deleted after installation in the programs?

  Slimware download files can be deleted after installation in the programs?

  Hello

  Do not download in the first place.

  Read this:

  http://answers.Microsoft.com/en-us/protect/Forum/protect_other-protect_scanning/Driverupdate-from-Slimware-utilities/d016d4a2-7ac4-467e-B07B-59058e7827e2

  See you soon.

• LR4 RC2 is necessary after installation of the LR 4.1?

  LR4 RC2 is necessary after installation of the LR 4.1?

  N ° on a Windows system it will have been replaced by installing 4.1, but I'm not sure on Mac systems.

• "Unable to install the plugin from RoboHelp for FrameMaker...." »

  Hi-

  I have 9 Frame and a copy of RoboHelp 8.0.0.203 demonstration and works in Windows 7 (all of a sudden. Yet to learn my way in the operating system after a catastrophic failure of the weekend with my trusty little machine XP.) I have no TCS2; just these two stand-alone tools. I have a book of frame I need to turn into contextual HLO and am auditioning Robo for the task.

  No dice. Whenever I try to import (see below re linking) I get an error message in a box marked "RHUtils": "unable to install the plugin from RoboHelp for FrameMaker. If please close FrameMaker and try again. »

  
  With your permission, I'll cover a few points in the order in which they come to mind:

  == > Initially I tried linking, hoping of course to the advantages of the single-sourcing. I learned in this forum and elsewhere (-btw, thanks for this great resource) I need the TCS2 in good faith in place to connect. Thought that I could import for now instead of it, just to see how it happened; received the same error message.

  == > It was AFTER I had done the research and on the Adobe site (http://www.adobe.com/support/robohelp/misc.html) found this: "the plug-in for RoboHelp, FrameMaker FrameMaker users allows quickly convert any number of books for a simple import or FrameMaker files in RoboHelp 2002 and X 3.» RoboHelp X 4 includes the plug-in! For RoboHelp, FrameMaker plug-in is only available for Windows. To install the plug-in, unzip the RoboMIF.dll into the Plugins folder in the installation of FrameMaker folder (normally found in C:\Program Files\Adobe\FrameMaker7.0\fminit\Plugins)...   Once the plug-in has been installed, restart FrameMaker. FrameMaker now includes a RoboHelp menu. "OK: I have downloaded RoboMIF.dll, installed according to the instructions, rebooted just in case, and now"Adobe RoboHelp"actually appears in the menu bar in the frame. I however always the error message whenever I try to import (now).

  
  == > For several of these attempts Frame was indeed closed. For several other Frame opened to the entry page and nothing else. No apparent effect, anyway.

  
  == > Import and link Word files seems to work very well - which is cool, but my document is in frame at the moment. I know I can convert, but up to now to convert the word seems to need to get all references, what I did in the framework. Doable but not my first choice.

  
  == > I found a thread of editors at http://www.mail-archive.com/[email protected]/msg18576.html / / www.mail-archive.com/[email protected] msg18576.html relating to this problem. The recommendation, (published here for brevity), who was the author:

  1. locate [the] Maker.ini file and ideally make a backup of it, just in case.
  2. in the [APIClients] section of the maker.ini file, add the following line:

  RH4FMver9 = Standard, RH4FMver9, C:\Program Files\Adobe\Adobe Technical Communication Suite 2\Adobe RoboHelp 8\RoboHTML\RHFrameMakerServer9.dll,all

  3. you should now be able to launch RoboHelp and 'link' files, FrameMaker, FrameMaker application should launch correctly.

  This doesn't seem to be my answer because I don't yet own TCS2. This path does not exist.

  (I still get excellent advice of training provided by this answering machine, RJ Raquez, to http://blogs.adobe.com/rjacquez/2009/05/linking_framemaker_9_books_in.html.)

  In any case, this is where I realized that I was, at least for now, of ideas. Does anyone have more?

  Thank you-

  Anne

  If you do not want to go down the road of miftogo mentions Arnis, you can always download the demo of TCS2 - it is fully functional for the period of the demo. I am tempted to install it in its own virtual machine (or another machine entirely) so that you do not get the demo interfere with your legitimate copy of FM9.

• HP Solution Center did not download with installation of the complete software/driver for F4580

  I downloaded the complete installation of the software and drivers for the printer/scanner HP DeskJet F4580 several times now, and every time that it only downloads the driver, it does not download the solution Center I need to scan! I am running Windows Vista Home Premium 64-bit and my computer is connected to my printer via USB (not wireless). All the help sections I've read say that the Solution Center is included in this download full (from the HP website), but it does not work when I try. And Yes, I made sure that each box is checked to download when pop-ups the user agreement screen, so it's not like I just didn't the selected software.

  My hardrive was damaged last week and I had to replace it. Needless to say, trying to reinstall all my old programs makes me out of my mind. I don't know where my original disk is; I didn't think that I should once again!

  Help, please! I'm desperate!

  Hello helen1029

  Sounds like you have met an incomplete installation. Try the following to clean drivers and allow a new installation.

  If the software has been downloaded and extracted to your system:

  1. type % temp % in the field of race

  2. Locate and open the folder starting with 7z (example: 7zS2356)

  3 open the Util folder

  4 open the CCC folder

  5. If you have an HP computer, run the L3uninstall.bat. If you have a computer not HP, run the L4uninstall.bat

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://get.Adobe.com/flashplayer/

  9 download drivers and full software features

  Complete software features Deskjet F4580

  10. run the download to reinstall the printer