Determine the alternating current

Similar Questions

• What version of Labwindows CVI which includes the alternative current instrument IVI

  Hello

  I'm looking for the version of Labwindows CVI which I should use to develop IVI - C drivers customized for instrument IVI DISARM. Please share the Labwindows version where I can find the option to select IVI AC power instrument and create a complaint IVI - C driver.

  Kind regards

  Usha

  Hi Usha,

  This version isn't out yet. It will release sometime this summer.

  Luis

• My laptop can not save the alternating current; He abrupt stop when I plug - off. Battery has expired?

  Is there any HP Puntip Pratunuum, Bangkok, Thailnd centre?  I want to check and repair my NB thanks.

  Hello

  For telephone support, please call (662) 353-9000 between 08:30 and 17:30, Monday to Friday (except holidays)

  Kind regards.

• Unable to determine the current location by this time El Capitan

  Hello.

  Recently, I have this problem with my Macbook pro. I turn on location services, as you can see...

  ... but my computer is unable to determine the current location in the date and time. Cards and find my mac are not also work more.

  

  Currently I have version 10.11.5 of El Capitan. It happened from one day to another, I don't update the software or anything like that.

  Thank you

  Edgar Lopes

  Turn on Wi - Fi for the information about the location.

• determine the type of the current installation

  Hello, I hope someone has an answer for me. I was given an old computer, XP home (w/no service packs). I installed all the updates, but if I need to reinstall, how can I determine if this is an upgrade or install a full (clean)? The Dell PC came with ME (a sticker) but has a valid XP tone. Thank you for your time.

  On Saturday, August 14, 2010 23:06:47 + 0000, lifeofgold wrote:

  Thanks for the advice of Ken. But the book current key on a clean install with a full version of XP Home OEM,

  If your key is an OEM XP Home key, Yes.

  or I need to reinstall first ME (uuuhhhgg!)  to be valid?

  No, the OEM versions don't clean facilities only. It's okay that a
  already on the disk, or even if everything is on the disc.

  Ken Blake

• IPCC Express - determine the age of current contact

  I am looking for a way to determine the age of the current contact during execution of the script. Something like a stage that would match the current age of current contact in a few seconds, then that could be stored in a variable and a value of trigger in an If / then. This could be used to trigger a backup CSQ overflow (if contact is longer than 90 seconds, then route the call to the queue of backup). Normally I use a loop and simply count the number of times that I spend in the loop, but for a specific application, it would be preferable to use the age contact instead. Any suggestions greatly appreciated.

  Thank you

  Chris

  Check:

  Download Statistical Reporting (general article)

  Purpose of report: CSQ ICD

  Field: Current wait time

  Position in queue

  Expected time-out

  Connected resources

  Row identifier: should be your CSQ identifier or string variable

  Statistical variable: Variable that you want to fill in your script.

  As you will see, there are many choices. I think that the current waiting time might be what you want.

• OIM 11 g R2-code Client - JRF is unable to determine the current application

  Hello
  
  I'm asking a resource via an API by using the client program, I face below question when I run the client program:
  November 17, 2012 20:56:35 < clinit > oracle.iam.platform.context.ContextManager
  GRAVE: IAM-0030002
  oracle.jrf.UnknownPlatformException: JRF is unable to determine the current application server platform.
  at oracle.jrf.ServerPlatformSupportFactory.getInstance(ServerPlatformSupportFactory.java:79)
  to oracle.iam.platform.context.ContextManager. < clinit > (ContextManager.java:77)
  at oracle.iam.platformservice.api.ClientLoginSessionServiceDelegate.loginSessionCreated (unknown Source)
  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
  at java.lang.reflect.Method.invoke(Method.java:597)
  to Thor.API.Base.SecurityInvocationHandler$ 1.run(SecurityInvocationHandler.java:68)
  at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
  at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
  at weblogic.security.Security.runAs(Security.java:41)
  at Thor.API.Security.LoginHandler.weblogicLoginSession.runAs (weblogicLoginSession.java:52)
  at Thor.API.Base.SecurityInvocationHandler.invoke (SecurityInvocationHandler.java:79)
  to $Proxy1.loginSessionCreated (Unknown Source)
  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
  at java.lang.reflect.Method.invoke(Method.java:597)
  at oracle.iam.platform.OIMClient.loginSessionCreated(OIMClient.java:291)
  at oracle.iam.platform.OIMClient.login(OIMClient.java:215)
  at oracle.iam.platform.OIMClient.login(OIMClient.java:197)
  to comp.iam.oim.client.Client. < init > (Client.java:37)
  to comp.iam.oim.client.ClientRequest. < init > (ClientRequest.java:24)
  to comp.iam.oim.client.RequestResourceCreate. < init > (RequestResourceCreate.java:44)
  at comp.iam.oim.client.RequestResourceCreate.main(RequestResourceCreate.java:57)
  Exception in thread "main" oracle.iam.platform.utils.NoSuchServiceException: java.lang.reflect.InvocationTargetException
  at oracle.iam.platform.OIMClient.getServiceDelegate(OIMClient.java:279)
  at oracle.iam.platform.OIMClient.getService(OIMClient.java:256)
  to comp.iam.oim.client.ClientRequest. < init > (ClientRequest.java:25)
  to compiam.oim.client.RequestResourceCreate. < init > (RequestResourceCreate.java:44)
  at comp.iam.oim.client.RequestResourceCreate.main(RequestResourceCreate.java:57)
  Caused by: java.lang.reflect.InvocationTargetException
  at sun.reflect.NativeConstructorAccessorImpl.newInstance0 (Native Method)
  at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
  at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
  at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
  at oracle.iam.platform.OIMClient.getServiceDelegate(OIMClient.java:275)
  ... 4 more
  Caused by: java.lang.NoClassDefFoundError: org/eclipse/persistence/indirection/ValueHolderInterface
  at java.lang.Class.forName0 (Native Method)
  at java.lang.Class.forName(Class.java:169)
  to $Proxy4. < clinit >(Unknown Source)
  at sun.reflect.GeneratedSerializationConstructorAccessor23.newInstance (unknown Source)
  at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
  at java.io.ObjectStreamClass.newInstance(ObjectStreamClass.java:924)
  at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1736)
  at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1328)
  at java.io.ObjectInputStream.readObject(ObjectInputStream.java:350)
  at weblogic.utils.io.ChunkedObjectInputStream.readObject(ChunkedObjectInputStream.java:208)
  at weblogic.rjvm.MsgAbbrevInputStream.readObject(MsgAbbrevInputStream.java:599)
  at weblogic.utils.io.ChunkedObjectInputStream.readObject(ChunkedObjectInputStream.java:204)
  at weblogic.rmi.internal.ObjectIO.readObject(ObjectIO.java:62)
  at weblogic.rjvm.ResponseImpl.unmarshalReturn(ResponseImpl.java:243)
  at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:348)
  at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:259)
  at weblogic.jndi.internal.ServerNamingNode_1036_WLStub.lookup (unknown Source)
  at weblogic.jndi.internal.WLContextImpl.lookup(WLContextImpl.java:424)
  at weblogic.jndi.internal.WLContextImpl.lookup(WLContextImpl.java:412)
  at javax.naming.InitialContext.lookup(InitialContext.java:392)
  to org.springframework.jndi.JndiTemplate$ 1.doInContext(JndiTemplate.java:132)
  at org.springframework.jndi.JndiTemplate.execute(JndiTemplate.java:88)
  at org.springframework.jndi.JndiTemplate.lookup(JndiTemplate.java:130)
  at org.springframework.jndi.JndiTemplate.lookup(JndiTemplate.java:155)
  to oracle.iam.request.api.RequestServiceDelegate. < init >(Unknown Source)
  ... 9 more
  Caused by: java.lang.ClassNotFoundException: org.eclipse.persistence.indirection.ValueHolderInterface
  in java.net.URLClassLoader$ 1.run(URLClassLoader.java:202)
  at java.security.AccessController.doPrivileged (Native Method)
  at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
  at java.lang.ClassLoader.loadClass(ClassLoader.java:305)
  to Sun.misc.Launcher$appclassloader$ AppClassLoader.loadClass (Launcher.java:301)
  at java.lang.ClassLoader.loadClass(ClassLoader.java:246)
  ... 34 more
  Process has finished with exit code 1.
  
  
  
  Through a few forum with that said:
  https://CN.forums.Oracle.com/forums/thread.jspa?threadID=2432434
  
  But all of the code is not running (I can check that a few sys out is not getting printed) and that's why the request is not triggered in my case.
  
  Any assistance on this please.
  
  Thank you

  Make sure that you have all the pots in the class path: -.

  $Oracle_IDM1/server/clent/oimclient.zip, you get 4 pots: -.

  oimclient.jar
  Spring.jar
  EclipseLink.jar
  Common - logging.jar

  In addition, you have already wlfullclient.jar and jrf - api .jar

  You must have already established the system property: -DAPPSERVER_TYPE = wls

  Make sure you visit the following link: -.

  http://docs.Oracle.com/CD/E27559_01/dev.1112/e27150/APIs.htm#BCFCDJGJ

  Also, are you able to ping and telnet your IOM hostname from your Windows machine?

  Problem may be firewall etc...

  You said you use Console Design? From where? From your Windows machine or directly from the server UNIX using XMing or VNC etc?

  If you UNIX server, copy the folder designconsole on your Windows machine AND configure things in the xlclient.cmd...

  If you have found ways to NoSuchServiceException, it's the connectivity problem...

  In the etc/hosts file on your Windows machine, add the IP address of the machine of the IOM...

  This will definitely work...

  In addition, .bash_profile, I set the following environment variables... See if you're missing something: -.

  JAVA_HOME=/usr/java/JDK1.6.0_21
  MIDDLEWARE_HOME = / home/oracle/Oracle/Middleware
  WL_HOME = $MIDDLEWARE_HOME/wlserver_10.3
  ANT_HOME = $MIDDLEWARE_HOME/modules/org. Apache.ant_1.7.1
  $PATH = path: $HOME/bin: $JAVA_HOME/bin: $ANT_HOME/bin

• How to determine the owner of the current package?

  Leave a package (which is defined with the appellant's rights: AUTHID CURRENT_USER) I want to determine the owner of this package. (We intend to deploy the same code in multiple schemas).
  
  A solution would be to analyze the results of the DBMS_UTILITY.format_call_stack... to other ideas?
  
  Thank you
  Mike

  Here's some code which proves padders suggestion

  create or replace function WhoAreYou return VARCHAR2 as
  begin
    RETURN SYS_CONTEXT ('USERENV', 'CURRENT_USER');
  end;
  
  create or replace procedure WhoAmI
  AUTHID CURRENT_USER as
  begin
      DBMS_OUTPUT.PUT_LINE('I am [' || SYS_CONTEXT ('USERENV', 'CURRENT_USER') || '].');
      DBMS_OUTPUT.PUT_LINE('You are [' || WhoAreYou() || '].');
  end;
  
  grant execute on WhoAmI to scott
  
  exec bm.WhoAmI()
  
  I am [SCOTT].
  You are [BM].
  

  With this approach, it does not matter if we use a synonym or someother 'usurpation' method. The 'Stunt' tell you who he is.

  -Edited to complete the sentence
  I suggest you avoide trying to determine synonym against the table and all these complications.

  Published by: rp0428 on March 2, 2012 14:54

• How determine the crossover frequency

  I'm having a hard time to understand how the high-pass filter determines vs high frequency. What value it measures. ? A change of RGB values or contrast? I see the sharpness of words or blur, but what values determine the amount of blur or sharpening? Is there and the actual frequency being high or is it just a metaphor to compare it to the audio crossover?

  No details on the workings of this filter is appreciated.

  A few additional explanations:

  Audio signals:
  frequency = cycles per second
  It is the frequency in the time domain.
  An arbitrary signal can be represented by a set of harmonic signals (sine, cosine)
  In addition, some DC (direct current, non-periodic component).
  A typical high-pass filter for audio signals:
  The cut-off frequency fc is at the transition between the increase in gain
  (low frequencies) and fixed gain 1.0 (high frequency).
  frequency reduction (mitigation)
  CF 0.01 0.01
  CF 0.10 0.1
  CF 1,00 0.707
  10.0 fc 1.0
  100 CF 1.0

  A typical high-pass filter for digital images:
  frequency = cycles per unit of length or (better) cycles per pixel
  It is the frequency in the space field.
  The highest frequency is 0.5 cycles per pixel (alternation of black and white pixels)
  A line of arbitray in a digital image can be represented by a set of harmonic signals
  In addition, DC-part.
  Each channel that r, G, B is filtered individually, one after the other.
  Frequency and gain are as above.

  A high pass filter applies to mitigation<1 to="" low="" frequency="" signal="">
  and removes the DC component entirely. This would result in a black background.
  Therefore, the background is extended to R = G = B = 128 (8 bits per channel) or
  R = G = B = 0.5 (standard).

  Edges contain stronger high-frequency components. These are preserved.

  http://en.Wikipedia.org/wiki/high-pass_filter

  In this doc, we find a simple implementation:
  y [0]: = x [0]
  for i from 1 to n
  y [i]: = a * y [i-1] + a * (x [i] - x [i-1])
  return y

  x [i] are values of R (or G or B) row in column i in the original image
  y [i] are values of R (or G or B) on the same line in column I after filtering.
  Factor (a) indirectly contains the cutoff frequency.
  This example does not yet apply the SHIFT R = G = B = 128.

  The implementation can be different (filter not recursive instead of recursive, as indicated above,
  higher order instead of first order, using a filter kernel 3 * 3 5 * 5 pixels instead of work
  in each row independently).

  I'm not trying to explain how Photoshop!  There are so many alternatives.

  Cordially - Gernot Hoffmann

• How can I determine the number of contacts that I have

  How can I determine the number of contacts that I currently have on my iphone

  I don't know of a way on the iPhone, but if you have a Mac, you can go to the Contacts (platform) app and scroll to the bottom where you will find the total.

  Same for iCloud.com on your browser, go to the app, scroll down.

• Determine the Type of connection WiFi

  Hello

  Is it possible in the OS X in order to determine the type of connection (a/b/g/n/ac) current WiFi?

  Thank you

  Option + click on the WiFi symbol in the menu bar.

  

• Satellite A300-202 - problems with alternating current

  Hello

  I bought a Satellite A300-202 a few months ago and I'm having intermittent problems with alternating current.

  Sometimes I plug the AC power and it does not start (the led are off and windows says that it is on battery) charge. Other times, he is in charge and suddenly stops.

  I suspected it might be the cord broken inside, but it seems to happen also when no one touches it. Usually, when it stops to load, I unplug the wall, wait a few seconds and plug in again, and it starts to load correctly never stop again.

  Someone at - it had a similar problem? I wonder if is it possible to just replace the parts to AC power so I won't have to send the laptop for repair.

  Thank you

  Pedro

  Hello

  I've never had a problem with my Toshiba Chargers but an old non - Toshiba power adapter died after 6 months of use. After the replacement, it works without any problem.

  I think you should check the update of the BIOS as mentioned by Akuma, but for me, it looks more like a problem with the AC adapter.
  So if the BIOS update help t doesn't, the adapter should be checked permanently.

• VI to determine the name of the project

  For a real-time application, I wanted to determine, at runtime, the name of the project in which the VI has been "content".  I wanted to get the name of the project (even) under four different conditions:

  • on the host, in development mode
  • on the host, in Run-Time mode (i.e. after being built as an executable)
  • on the goal of RT, development mode
  • on the aim of RT, in run mode.

  It is not so easy.  I figured out how to make the first two (use the name property of the active project development and use the next last folder directory of the Application in Run-Time mode mode), but I'm having trouble to get this information to get the target RT code.  Has anyone tried this before?  Did you?  Advice (or even downright Solutions)?

  Bob Schor

  Well, I figured out, but it's not pretty.  In the previous post, I explained why I wanted to do - here I will explain how I did this.

  There are three main modes, under which Applications can run: development mode (when you are programming in LabVIEW and press the button "Run"), Run Time System (an executable on a PC) and Embedded (code that runs on a target in real time, in the form of executable file or development).  Of these, only one mode of development gives you access live (via the Application, the active project property) in the name of the project file.  My goal is to have the user interface and the RT 'chunks' of the project in real time have access on behalf of the project, the system I'll create will use same code on two subsystems, meaning that it will run on the PC at least once in the mode of development .

  The key step is to create a 'constant VI', I'll call CONST name of the project, which consists of a single indicator of string, name of the project, which "held" the name of the project.  I initially thought to use a Global Variable, but there is a technical problem with that I will mention later.  I didn't use CONST name of the project directly, but, instead, use a 'Get the project name' VI that has, for its single release, the name of the project.

  This VI, when it runs, determines the type of request under which it is running.  If it is something other than the Mode of development, he calls CONST project name and returns its value.  If this is the Mode of development, it gets the name of the project, he returned, but just before leaving, he arranges to be updated programmatically CONST project name when it is called in the future, it will return the name of the project (update).  [Then why not simply initialize CONST project name?  I'm looking for a "generic" solution that will always return the correct value, even if I move to another project and don't remember about the change and change - all I have to do to make it work is to run once in the mode of development.  Who has ever developing code without testing before making the executable?].

  I wrote a VI gave the name of project Save, which does the following: he calls set the timer on CONST project name to define the name of the new project (this works even if we put an indicator), calls to use current default to make the new value "stick" and called "Instrument to save" to save the changes.  The problem is that CONST project name cannot be "running" in the State to use current default work without raising an error.  If the name of the Save project is simply called as a Subvi to get a project name, it will be in the State of operation as it is used in the case of non-development mode to get a project name.  The solution to this witch hunt is to use the asynchronous call with-and-Forget 'spawn' name of the Save project.  Finally, we modify register project name so that it starts with a loop "wait", examinging the State of execution of CONST name project and waiting for it to exit the executing State, indicating that it is prudent to make the change.

  Phew!  But it works!  Oddly enough, when I tried this using a Global Variable instead of my Constant VI, I kept getting errors during execution are currently lacking, but despite the mistakes, the code seemed to run correctly.  I found an article (written for LabVIEW 5!) explaining that it was expected as Globals behavior were always in the State of operation.  Actually, I just realized that I had not tried with the call-and-Forget asynchronous schema, then perhaps a decade later, LabVIEW will allow me to do this using a Global without raising an error...

  BS

• How to determine the date of manufacture of computers of HP Desktop

  I support the computers in the House of representatives. Every two years we have elections and some win and some lose. The Freshman Congress Member inherit equipment since the previous Congress however the 'historical' equipment is inherited, not exactly.

  I'm trying to find a way to determine at what age a of each item that they have inherited, and by lifting desktop HP on the site of his number series doesn't seem to tell me if it is still under warranty or not, and when the warranty has expired or will expire.

  The serial number itself contains the campaign of that equipment was manufactured or not? I can't go by the release date "BIOS" because I hope that the BIOS has been the current BIOS because it was purchased and the release date on the BIOS would not date, the PC was built/made/sold. Many that I'm looking start by MXL or 2UA and I figur out if it cannot be translated somehow to a year or somewhere in the middle of the serial number?

  Any help would be appreciated. I have at least 75-125 HP I need to determine the age of... If all goes well, easily.

  Thanks old_geekster, I appreciate your response to my post. I finally locate a guaranteed HP page that allows me to type in the serial numbers of 10 or more and get a report of the beginning of the warranty and end dates. I guess the warranty start date would be coincinde with the date of purchase or close to it, so I'm happy with this info.

  The link you have provided today with computer laptop page wanted to give me the number of the product and serial number and unfortunately the reports that I have to go have that the serial number, make and model, the detailed characteristics of the speed of the processor, the memory installed, current BIOS installed, but no number of product so it is not as useful I fell at last on the page.

  This is a link to what I found and could be useful to others too:

  http://h20565.www2.HP.com/hpsc/WC/public/home

• What is the quick way to check if the battery current sequency contains nothing or not?

  Hi all

  I have switch from C++ to the labview in a short time before. I got a code written in labview 7 someone else and I am trying to change a code in my labview 2012. In the code, there are a lot of nested structures (like sequency battery, case, etc.). Some code contains 30 batteries but not all subsequences contains controls or code. Someone when I pass in a sequence, it seems empty, but some controls or code could be hiding somewhere beyond the current view. Thus, instead of zoom current sequency block, is that any quick way to identify if the block contains another type or not? Thank you.

  It is spelled "sequence".

  Make sure that autogrow is enabled for the sequence stacked so that you don't have the problem of the code hidden beyond the edges.

  Right-click on the stacked sequence and choose replace with flat sequence.  It will extend things, but how you can see all the pictures.

  Block diagram cleanup allows to get rid of more space and clean up the code.

  If you see empty images, you can right-click on the border between frames and select merge the images.  You should also do this if you have separate frames that should not be because there is already a data dependence that determines the sequence of operation.