Determine the IP address of local login using the root account

Similar Questions

• the root account not working for vSphere Client 5.5, for SSH works fine

  Hey.

  I got this:

  I can connect to vCenter 5.5 by SSH and the root user and password works fine

  I can connect to vCenter 5.5 by vSphere Client and use domain user and everything works fine

  I cant't connection 5.5 by user of vSphere vCenter Client and use of root and the password. I have information on

  "Cannot complete the connection because username or password incorect.

  IM shure I use the right password for root.

  A suggestion?

  

  Ok. Thank you community vExpert and Lukasz of my team, we found easy reason perhaps, but not at the first glance for me

  We had the installer by default "Source of identity" for Active Directory then when I used only root for connection I got the error with wrong password.

  In this possible case is just to connect to vcenter using root@localos credintials.

  

  But in addition we sam of similar mistakes inside the SSO connects:

  Location of the vCenter Single Sign-On log files for vCenter Server 5.1 and 5.5 (2033430) | VMware KB

  /var/log/VMware/SSO/VMware-STS-idmd.log

  2016 06-21 13:57:31, ERROR 142 [IdentityManager] could not authenticate [root] main tenant [vsphere.local]

  javax.security.auth.login.LoginException: failed connection

  at com.vmware.identity.idm.server.provider.ldap.LdapWithAdMappingsProvider.authenticate(LdapWithAdMappingsProvider.java:327)

  at com.vmware.identity.idm.server.IdentityManager.authenticate(IdentityManager.java:2412)

  at sun.reflect.GeneratedMethodAccessor24.invoke (unknown Source)

  at sun.reflect.DelegatingMethodAccessorImpl.invoke (unknown Source)

  at java.lang.reflect.Method.invoke (unknown Source)

  at sun.rmi.server.UnicastServerRef.dispatch (unknown Source)

  to sun.rmi.transport.Transport$ 1.run (unknown Source)

  to sun.rmi.transport.Transport$ 1.run (unknown Source)

  at java.security.AccessController.doPrivileged (Native Method)

  at sun.rmi.transport.Transport.serviceCall (unknown Source)

  at sun.rmi.transport.tcp.TCPTransport.handleMessages (unknown Source)

  to sun.rmi.transport.tcp.TCPTransport$ ConnectionHandler.run0 (unknown Source)

  to sun.rmi.transport.tcp.TCPTransport$ ConnectionHandler.run (unknown Source)

  at java.util.concurrent.ThreadPoolExecutor.runWorker (unknown Source)

  to java.util.concurrent.ThreadPoolExecutor$ Worker.run (unknown Source)

  at java.lang.Thread.run (unknown Source)

  Caused by: com.vmware.identity.idm.InvalidPrincipalException: could not find the main id: {name: root domain: OurAdDomain.local}

  at com.vmware.identity.idm.server.provider.BaseLdapProvider.findAccountLdapEntry(BaseLdapProvider.java:543)

  at com.vmware.identity.idm.server.provider.ldap.LdapWithAdMappingsProvider.getUserDN(LdapWithAdMappingsProvider.java:1715)

  at com.vmware.identity.idm.server.provider.ldap.LdapWithAdMappingsProvider.authenticate(LdapWithAdMappingsProvider.java:323)

  ... 15 more

  2016-06-21 13:57:31, 144 ERROR [IdentityManager] failed to main checkUserAccountFlags [root] for tenant [vsphere.local]

  "2016-06-21 13:57:31, 144 exception ERROR [ServerUtils] ' com.vmware.identity.idm.IDMLoginException: the connection has failed.

  com.vmware.identity.idm.IDMLoginException: failed connection

  at com.vmware.identity.idm.server.IdentityManager.authenticate(IdentityManager.java:2481)

  at sun.reflect.GeneratedMethodAccessor24.invoke (unknown Source)

  at sun.reflect.DelegatingMethodAccessorImpl.invoke (unknown Source)

  at java.lang.reflect.Method.invoke (unknown Source)

  at sun.rmi.server.UnicastServerRef.dispatch (unknown Source)

  to sun.rmi.transport.Transport$ 1.run (unknown Source)

  to sun.rmi.transport.Transport$ 1.run (unknown Source)

  at java.security.AccessController.doPrivileged (Native Method)

  at sun.rmi.transport.Transport.serviceCall (unknown Source)

  at sun.rmi.transport.tcp.TCPTransport.handleMessages (unknown Source)

  to sun.rmi.transport.tcp.TCPTransport$ ConnectionHandler.run0 (unknown Source)

  to sun.rmi.transport.tcp.TCPTransport$ ConnectionHandler.run (unknown Source)

  at java.util.concurrent.ThreadPoolExecutor.runWorker (unknown Source)

  to java.util.concurrent.ThreadPoolExecutor$ Worker.run (unknown Source)

  at java.lang.Thread.run (unknown Source)

  2016-06-21 13:57:31, 144 INFO [IdentityManager] authentication failed for user [root] the tenant [vsphere.local] in milliseconds [4]

  When I used the credentials with appropriate domain name:

  root@localos we received newspapers below:

  2016-06-21 14:11:58, 971 INFO [LinuxNativeAuthDbAdapter] [root] user authentication

  2016-06-21 14:11:58, 974 INFO [IdentityManager] authentication successful for the user [root@localos] [vsphere.local] tenant in milliseconds [3]

  2016-06-21 14:11:58, 984 INFO [LinuxNativeAuthDbAdapter] to get local groups for the [root] user. Recursive? [Yes]

  When I temporary switch the source of identity - "localos" and use the root account to log logs below, we received and I connected without problem:

  2016-06-21 14:14:37, 545 INFO [LinuxNativeAuthDbAdapter] [root] user authentication

  2016-06-21 14:14:37, 549 INFO [IdentityManager] authentication successful for the user [root] the tenant [vsphere.local] in milliseconds [4]

  2016-06-21 14:14:37, 564 INFO [LinuxNativeAuthDbAdapter] to get local groups for the [root] user. Recursive? [Yes]

  Now, for me, more clearly

  Once again thank you

  Sebastian

• Can access VCSA with the root account, but cannot access vSphere with the same root account

  I am able to connect to the VCSA (: 5480) with the created password for root, but I can't log in vSphere (: 9443) with this same root account).  It seems that the password has been correctly set, but weird that I can connect to one and not the other.  I recently improved bed and breakfast ESXi and VCSA version 5.5 Update 2, but don't think that should have an effect on.  Any suggestions?  Help, please.

  Understand the problem.  When you change the field by default to another identity source, you must type root@localos as the user name to use the root account.

• After Effects will be not updated for MAC 10.9.4 even on the Root account.

  I've already updated my Mac OS to 10.9.4 and it was only until today that I wanted to use After Effects. I opened After Effects and I get an error, after some googling I am taken to a download page for the update of After Effects. I downloaded the update, but when I ran it, it said I had no sufficient privileges. After a long chain of events that involved trick my computer into thinking that it was all new to an admin account, I made an admin account and from there had access to the root account. Once the root account, I thought that all the permissions would be open, but no, I still receive the same error message, "please contact your system administrator if you want to apply updates on your machine. Updates have been removed by your administrator. »

  Is there an I need to press the button or command that I need to type in the root account, which will allow me to update the AE? Any help would be appreciated.

  Thank you.

  This is not the administrator of the computer; rather, it is the administrator of your software licenses. Who distributed your Adobe software seems to have chosen the option in this distribution to disable updates. You will need to talk with them.

• Creative Cloud Desktop only works in the root account

  10.10.3 Mac

  Cannot open the VAC Office. nothing happened to the screen after clicking on the icon. only a CAC logo (in gray) appeared in the status bar at the top, but it disappeared quickly. Have you tried:

  1. creation of cloud cleanser

  2. safe Mode

  3. clean the OOBE, AAMUpdater records

  4. connect with the administered user another

  Installed and opened successfully to the root account, but don't always works is not in my account (which is an administrator).

  Please help me solve the problem. Thank you!

  I fixed this problem in my environment (Yosemite 10.10.3) after a day and a half, tinker with it.

  Open launchpad / look for the disk utility / click on verify disk permissions / repair disk permissions.

  It worked for me. Adobe CC now works again and the applications are broken no longer.

• How to analyze a crash dump to determine the root cause of the dump?

  Hello, I have a desktop computer that breaks down frequently.  EventViewer showed that blue screens keep on occurring.  We suspect it is a new software that has been installed and have a few dumps, but would appreciate any advice on playing the dumps to make sense.  Thank you
  \|/

  Hello

  BlueScreenView execution and it displays the information in a very readable format.
  is simple and fast. BlueScreenView is not as accurate for the specific CAUSE
  WinDBG however it brings a wealth of information - and it's still very
  simple to use,

  BlueScreenView - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  When you click on each top of the article Bug_Check the lower part displays the
  Names of files containing more information. Sometimes, the CAUSE is the real cause
  but more likely, it's what has been assigned (or pushed to the fault) by something
  on the other. Check commands/options menus, and right-click
  While in BlueScreenView.

  How read partial memory dump files that Windows creates for debugging
  http://support.Microsoft.com/kb/315263/en-us?p=1

  Check this thread for more information using BlueScreenView, MyEventViewer and
  other methods of troubleshooting BlueScreens - answers top 3 (+ 1 more). This
  Convenience store is for Windows 7, however, she also works for XP and Visa.
  the main differences are using RUN instead of start - search (for XP).

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/sometimes-i-get-a-blue-screen-when-using-IE-8/c675b7b8-795f-474d-a1c4-6b77b3fcd990

  ------------------------------------------------------------

  WinDBG is a more complete debugging tool.

  How to read the memory dump file that is created by Windows if an incident occurs
  http://support.Microsoft.com/kb/315263/en-us

  Using the Microsoft Windows Debugger (WinDbg)
  http://kipirvine.com/ASM/4th/debug/WinDbg/index.htm

  WinDbg
  http://en.Wikipedia.org/wiki/WinDbg

  Download and install the debugging tools for Windows (use the SDK)
  http://www.Microsoft.com/whdc/devtools/debugging/default.mspx

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

• I accidentally run the environment using the root account

  Hello
  
  I am trying to restart the concurrent Manager but accidentally into account root then also EPS of DB and APPS
  
  the solution I did was change the owner chown-r applmgr:dba apps / and inst and also for the DB chown-r: dba oracle db.
  After that, I run the DB env and it has been successfully wihtout exisitng errors or addbctl.sh: exit with status 0
  
  but in applications when I run ENV then go to ADMIN_SCRIPTS_HOME/sid_name.
  then adstrtal.sh the APPS ask me a username and password which is entered without having to enter because I'm on the side of the APPS
  
  error message:
  
  adstrtal.sh: the base connection could not be established. The database is out of service or applications provided credentials are wrong
  
  USE: adstrtal.sh < appsusername/appspassword >
  
  adstrtal.sh: leave with the State 1
  
  
  
  Help, please
  
  Thank you
  
  Published by: cheesewizz on November 23, 2010 22:05

  Hello

  If please run AutoConfig on node layer (as user oracle and database after the database of supply env file) and make sure that it ends successfully. Then, run AutoConfig on the node application layer (as user applmgr and after the supply env file) and see if it returns any errors.

  Thank you
  Hussein

• Set alarm when the ROOT user login

  Hello forum!

  Is it possible to configure an alarm trigger to let me know when the ROOT account is used in vCenter or any ESXi?

  Thank you!

  Jorge G.

  Take a look at this post for the solution - http://www.virtuallyghetto.com/2011/10/how-to-create-vcenter-alarm-to-monitor.html

  BTW - unless you have created a user called "root" on your vCenter server, you will most likely only need follow this your ESX(I) hosts and not vcenter server

• Not able to connect with the root via putty ssh account

  Hello

  I activated the lock mode and activated ssh as well.but I am still unable to log in using PuTTY says access denied. At the same time, I can able to connect to esxi console using the root account. Help, please.

  In the locked mode, you will only be able to connect through vCenter, not via SSH.

  See http://pubs.vmware.com/vsphere-51/topic/com.vmware.vsphere.security.doc/GUID-F8F105F7-CF93-46DF-9319-F8991839D265.html

• you have to copy a file to the root directory...

  IM using winscp to copy a netapp host utility, but it must be copied into the directory "root" and run it from that directory.

  Of course, using winscp, as I can only log in with a user account that I created in esx and not root. How to copy a file to the directory root?

  That's what the Solution says to do, does that mean that I have to copy the files in the root directory?

  ESX host utilities install script fails when it is called in 'su' environment

  Keywords: VMware ESX host utilities

  Solution

  Utilities of the host needs to the environment of the root, or by logging in as "root" or by switching to the root with su - environment Installing the utilities of the host in the root environment by running the command: su -

  You can use root - as long as you allow root ssh access - what is advised.

  Another alternative is to download Veeam FastSCP (free) and use it - with this you can authenticate with your user account non-root, but you can elevate your privileges specifying the root account. It is the method and the tool I use. You'll have to excuse my lack of terminology Linux

• How to restore the root permission administrator account

  on a test lab, a host ESX 4, I accidentally changed permission to the root account to the Administrator role to the role of read-only on one of the virtual machines.  This is why, when I connect to the host as root via vSphere Client, I have read-only access to one of the virtual machines.  What is the best way to fix that and go back to the root to have the role of administrator?

  Thanks in advance.

  Hello

  Moved to the Security Forum.

  You must log in as root on the ESX or ESXi console and modify the /etc/vmware/hostd/authorizations.xml and the ACEDataRoleID to-1 instead of what it is.

  Best regards
  Edward L. Haletky VMware communities user moderator, VMware vExpert 2009, 2010

  Now available: url = http://www.astroarch.com/wiki/index.php/VMware_Virtual_Infrastructure_Security'VMware vSphere (TM) and Virtual Infrastructure Security' [/ URL]

  Also available url = http://www.astroarch.com/wiki/index.php/VMWare_ESX_Server_in_the_Enterprise"VMWare ESX Server in the enterprise" [url]

  Blogs: url = http://www.virtualizationpractice.comvirtualization practice [/ URL] | URL = http://www.astroarch.com/blog Blue Gears [url] | URL = http://itknowledgeexchange.techtarget.com/virtualization-pro/ TechTarget [url] | URL = http://www.networkworld.com/community/haletky Global network [url]

  Podcast: url = http://www.astroarch.com/wiki/index.php/Virtualization_Security_Round_Table_Podcastvirtualization security Table round Podcast [url] | Twitter: url = http://www.twitter.com/TexiwillTexiwll [/ URL]

• on Windows 7 Home Premium edition. Is it possible to determine the ip address of any remote login to my computer?

  My computer is running on Windows 7 Home Premium edition.    Is it possible to determine the ip address of any remote login to my computer?    I noticed that termservice was running, as well as the remote registry and winrm - and I began not to them.

  Thank you.

  My computer is running on Windows 7 Home Premium edition.    Is it possible to determine the ip address of any remote login to my computer?    I noticed that termservice was running, as well as the remote registry and winrm - and I began not to them.

  Thank you.

  Well quite simply a Win 7 Home Premium computer can NOT act as a host [DRC] Remote Desktop is not a problem. If you want to see if something needs to connect remotely with the help of another program you can look in the event viewer for clues...

  http://Windows.Microsoft.com/en-us/Windows/search#q=Event+Viewer

  You can also go to Start and type services.msc in the search window. Start the component services snap-in and stop these three services. Set Manual as well.

  If you suspect a virus or malware of any kind make sure you run a good antivirus program such as MSE or download and run Microsoft Safety Scanner or ESET online scanner...

  http://Windows.Microsoft.com/en-us/Windows/products/security-essentials

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  http://www.eset.com/us/online-scanner/

• Determine the MAC address of the LAN knowing that the model and serial number

  Laptop Toshiba SN 96592614 G

  Is it possible to determine the MAC address of the network card, knowing that the model and the serial number of your laptop?

  How to enter the Toshiba addicts.

  I saw you using Toshiba unit details page with the serial posted Qosmio F30-113 offered in Russia.

  Your laptop is stolen or what?

• Determine the number of traditional DAQ hardware using Labview.

  Hello

  Anyone can answer the question:

  Regarding materials traditional DAQ, for example the DMM OR-4060, how

  can I programmatically determine the number of device which can be seen in MAX?

  With the help of Labview 8.5, I looked into the following function libraries:

  NOR-DMM

  VISA

  NOR-ModInst

  None of the libraries above seem to provide access the number of traditional DAQ hardware

  property, which is automatically assigned.

  Background:

  I have a 18 PXI chassis containing 2 DMM, in housing 3 and 14.

  The DMM may be a mixture of type OR-4060 or NOR-4070.

  The system is controlled by a Teststand sequence employing IVI - DMM

  steps.

  When you set the IVI logical name step, I am referring to IVI device defined Sessions

  Max - rutime determined.

  Labview VISA functions using I can determine the model, i.e. 4060 or 4070.

  Because the DMM just locate into the slots 3 or 14, then the devices NOR-4070

  are accessible using the following descriptors of resources: PXI1Slot3 or

  PXISlot14.

  (The 4070 is compatible DAQmX.)

  So for devices OR-4070, I can predefine 2 Sessions of IVI device, knowing

  It will be sufficient for all occasions, when I run my Teststand sequence, which will be

  determine what device session to use at run time.

  But I'm stuck for the NOR-4060.

  At the Session of the device, I have to give a descriptor of resource the following

  format: DAQ::x (where x is the device number)

  I could create device 18 sessions each reference to a different DAQ::x, but to select

  the good pair during execution, I would need to programmatically determine the device

  number, i.e. the value of x.

  Where my question.

  The closest I came to a solution was an entry of the Knowledge Base that said that the

  Assigned device number would be the same as the slot number, providing the

  Number of the device had not previously configured manually.

  Unfortunately, our device numbers have been changed manually and maybe in the future.

  All popular solutions.

  Gary.

  Hi Gary,.

  Good afternoon and I hope that your well today.

  Thanks for your post and I want to help you solve your problems.

  I don't think there is just a function that you can use to identify and collect information on all cards with your. For traditional DAQ devices in particular I suggest using the Information.vi of DAQ devices get.

  If you look at this link,

  SAL posted an example VI entitled, find dev trad.vi.

  You can get information such as serial number, Dev name and the Base address.

  The assistance of the respective drivers to collect information you could generate an array of strings with the information that you need all the slots.

  Please let me know if this is useful at all,

• I need a way to send emails with the SAME unique 'from' and 'reply-to' address that my current method to use a generic account is at the origin of the problems.

  I have my own areas and when I email companies and organizations I always give them a single as e-mail address: [email protected]. This helps cut down on SPAM and identifies when organizations are hacked so I can 'kill' individual addresses with my domain registration.

  I currently do this by using a temporary NOSPAM Thunderbird "generic" account "from" address (which I need to change from time to time and 'kill' with my domain registration to prevent SPAM) and I change the 'reply-to' address when I send an email to such an organization. What tends to work OK most of the time, but often the 'reply-to' address is lost at the other end, perhaps when the emails are forwarded internally. This can leave some temporary old sent emails "from" addresses never happen to me.

  Much cleaner would be to send these emails with identical (and unique) 'from' and 'reply-to' fields. Someone has ideas how to achieve this goal, but obviously without creating an individual account each time? If Thunderbird helped change the address 'from', in special circumstances, it might be a solution.

  Have you considered adding several identities to the main account? In addition, there are modules allowing to select the correct identity to send messages:

  https://addons.Mozilla.org/en-us/Thunderbird/addon/identity-Chooser/

  https://addons.Mozilla.org/en-us/Thunderbird/addon/correct-identity/

  and another which might be of interest: https://www.absorb.it/virtual-id