Determine the name of the Auditors

Similar Questions

• VI to determine the name of the project

  For a real-time application, I wanted to determine, at runtime, the name of the project in which the VI has been "content".  I wanted to get the name of the project (even) under four different conditions:

  • on the host, in development mode
  • on the host, in Run-Time mode (i.e. after being built as an executable)
  • on the goal of RT, development mode
  • on the aim of RT, in run mode.

  It is not so easy.  I figured out how to make the first two (use the name property of the active project development and use the next last folder directory of the Application in Run-Time mode mode), but I'm having trouble to get this information to get the target RT code.  Has anyone tried this before?  Did you?  Advice (or even downright Solutions)?

  Bob Schor

  Well, I figured out, but it's not pretty.  In the previous post, I explained why I wanted to do - here I will explain how I did this.

  There are three main modes, under which Applications can run: development mode (when you are programming in LabVIEW and press the button "Run"), Run Time System (an executable on a PC) and Embedded (code that runs on a target in real time, in the form of executable file or development).  Of these, only one mode of development gives you access live (via the Application, the active project property) in the name of the project file.  My goal is to have the user interface and the RT 'chunks' of the project in real time have access on behalf of the project, the system I'll create will use same code on two subsystems, meaning that it will run on the PC at least once in the mode of development .

  The key step is to create a 'constant VI', I'll call CONST name of the project, which consists of a single indicator of string, name of the project, which "held" the name of the project.  I initially thought to use a Global Variable, but there is a technical problem with that I will mention later.  I didn't use CONST name of the project directly, but, instead, use a 'Get the project name' VI that has, for its single release, the name of the project.

  This VI, when it runs, determines the type of request under which it is running.  If it is something other than the Mode of development, he calls CONST project name and returns its value.  If this is the Mode of development, it gets the name of the project, he returned, but just before leaving, he arranges to be updated programmatically CONST project name when it is called in the future, it will return the name of the project (update).  [Then why not simply initialize CONST project name?  I'm looking for a "generic" solution that will always return the correct value, even if I move to another project and don't remember about the change and change - all I have to do to make it work is to run once in the mode of development.  Who has ever developing code without testing before making the executable?].

  I wrote a VI gave the name of project Save, which does the following: he calls set the timer on CONST project name to define the name of the new project (this works even if we put an indicator), calls to use current default to make the new value "stick" and called "Instrument to save" to save the changes.  The problem is that CONST project name cannot be "running" in the State to use current default work without raising an error.  If the name of the Save project is simply called as a Subvi to get a project name, it will be in the State of operation as it is used in the case of non-development mode to get a project name.  The solution to this witch hunt is to use the asynchronous call with-and-Forget 'spawn' name of the Save project.  Finally, we modify register project name so that it starts with a loop "wait", examinging the State of execution of CONST name project and waiting for it to exit the executing State, indicating that it is prudent to make the change.

  Phew!  But it works!  Oddly enough, when I tried this using a Global Variable instead of my Constant VI, I kept getting errors during execution are currently lacking, but despite the mistakes, the code seemed to run correctly.  I found an article (written for LabVIEW 5!) explaining that it was expected as Globals behavior were always in the State of operation.  Actually, I just realized that I had not tried with the call-and-Forget asynchronous schema, then perhaps a decade later, LabVIEW will allow me to do this using a Global without raising an error...

  BS

• Determine the name of class LVOOP? d ' a class of child...

  Hello

  I have a number of modules (classes) that inherit from a base class called "Module".  I have all these in an array of type 'Module', I would like to save some information of each of these modules, but I need to make the distinction between each module.

  Is there a way to determine the class name of the data cable?

  Can I use the flattened string Variant, but I was wondering if it had built in property for this node/function?

  Thank you
  Jonathan

  Examples of joint:

  

  

  

  Malkieri,

  There is no generation in function that does exactly what you are looking for, but you can use the 'Get LV class Path' VI to return the *.lvclass of an object path given.  Using this way, you can either parse the name, or you can use Server VI to get the name of the class, as shown in the picture as an attachment.

  Chris M

• Determine the file name lengths

  Is this possible in Windows 7 to determine the length of the file names in an old and its subfolders?

  I tried some freeware programs that are supposed to do, but with not much luck.

  Thank you

  Sounds like pretty simple job for someone who knows how to write scripts that run in Windows, in something like Visual Basic.  Until this person comes to help here, I will mention that a method I've found is to go to the desired folder, copy the filepaths of the elements there, paste into an Excel sheet and use formulas to deal with the results.

  More details: when opening the file (or do a search in this folder), click on organize, click Select all, press on and hold down the SHIFT key and right-click on any file name, click Copy as path, go to an Excel spreadsheet and paste it into cell A2 to display a column to fill with paths.  Because we want to count the characters in the names of files and no paths together, we have a few delicate manufacturing formula Excel.

  I did the labels column for cells A1 to E1: entirepath filename extension namelength pathlength.  B2 E2 to cells contain these formulas:

  B2

  = IF (ISERROR (FIND("\",A2)), A2, RIGHT (A2, LEN (A2) - FIND ("|", SUBSTITUTE (A2, "-","|", LEN (A2) - LEN (SUBSTITUTE(A2,"\",""))))))

  C2

  (= IF (ISERROR (FIND(".",B2)),"", RIGHT (B2, LEN (B2) - FIND ("|", SUBSTITUTE (B2, ".","|", LEN (B2) - LEN (SUBSTITUTE(B2,".",)))) "" ")))

  D2

  = LEN (A2)

  E2

  = LEN (B2)

  Note that the namelength will include characters from file extension, or at least it did for me: I always keep the setting to display the file extension in Windows.

  For all information from production lines according to the formulas, select cells B2 to E2, copy, select the cells on the lower lines of the C2 at the last line with a filepath showing and paste.

• Determine the name of the model of service tag

  I just bought a used laptop in VAIO, but the model name label is worn to the point where some characters are unreadable. Is it possible to determine the name of the model ther service tag or serial number? Thank you.

  Hello.

  The Sony eSupport Section of the Support will help you find the model number of Sony VAIO laptop

  If my post answered your question, please click "accept as a Solution.

• How to determine the name of the Cluster?

  Version of the grid: 11.2.0.3 on Solaris 10
  
  When we start to install the grid Infrastructure, we specify a Cluster name.
  
  Question1.
  How can I determine the name of the cluster to a RAC 11.2 Cluster? We maintain an inventory of DB. For each cluster, we specify the name of the Cluster. This is why we are asking the name of the cluster.
  
  
  Question2.
  The name of the cluster is without functional importance. Right? I don't remember using the Cluster name in any order (srvctl, crsctl,...)

  To determine the name of the cluster,

  [oracle@iron1 ~]$ olsnodes -c
  ironcluster
  [oracle@iron1 ~]$
  

  I wouldn't say it's very technical significance, even if it is used as a default value in a few other names.
  --
  John Watson
  Oracle Certified Master s/n
  http://skillbuilders.com

• Need help to be able to enter a cluster name, and to determine the other 2 variables

  All,

  If possible, I would like to be able to enter a cluster name powercli and use this piece of information to determine the 2 variables.

  Variable 1 - I would like to take the cluster name and the name of esx host with the least amount of VM output.

  Variable 2 - then I want to take this ESX host and the data store that has the most space of output.  A condition for this is that it must have more free space, but also have a minimum of 130 GB of available.

  Any ideas?

  It seems that I've lost a line during the copy, sorry about that.

  $freeGBTgt = 130
  $clusterName = Read-Host -Prompt "Enter a clustername"
  
  $min = 9999
  Get-Cluster -Name $clusterName | Get-VMHost | %{
       if($_.Extensiondata.Vm.Count -lt $min){
            $minVmHost = $_.Name
            $min = $_.Extensiondata.Vm.Count
       }
  }
  Write-Host "In cluster" $clusterName "server" $minVmHost "has the least guests"
  
  $maxDsFree = 0
  Get-VMHost -Name $minVmHost | Get-Datastore | %{
       if($_.FreeSpaceMB -gt ($freeGBTgt * 1KB) -and $_.FreeSpaceMB -gt $maxDsFree){
            $dsName = $_.Name
            $maxDsFree = $_.FreeSpaceMb
       }
  }
  if($maxDsFree -ne 0){
       Write-Host "On host" $minVmHost "datastore" $dsName "has" ($maxDsFree/1KB) "GB free space"
  }
  else{
       Write-Host "On host" $minVmHost "there is no datastore with more than" $freeGBTgt "GB free space"
  }
  

  ____________

  Blog: LucD notes

  Twitter: lucd22

• How to determine the SCAN IP (or name) of a cluster?

  DB version: 11.2.0.1
  Version of the operating system: Solaris 5.10
  
  How can I determine the IP SCAN of a cluster?

  Here is an example:

  [root@lxxxc01 ~] # srvctl config scan
  SCAN name: lxxx-cluster-scan, network: 1/19x.xxx.56.0/255.255.255.0/eth0
  SCAN VIP name: scan1, IP: /xxrac-cluster-scan.example.com/19x.xx.56.105

  HTH
  Chandra

• Using JavaScript to determine the name of the file a form

  We have a lot of forms, and in many cases, our custom JavaScript if applies to all forms in a given folder. We want to determine the name of the file of the form so that we do not have to list each shape in a giant 'IF' statement.
  
  Has anyone found how to determine the folder of a form using JavaScript?
  
  Thank you!
  -Jake

  Hey Jake,

  Is good enough record id, it should not change anyway.

  Alert (externalFormId);

  will provide the folder under that accessed the form.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• How can I determine the type of image to be used before loading an image?

  I'm developing an application using VB 2005 which measures two 8-bit or 16-bit image files. When I saw the picture, I find that I have to set the type of image the image buffer before playback of the image in it. For example, if I read a 16-bit image in a buffer of 8 bits, the image is truncated. I guess I could read the image in a 16-bit buffer and retype it if the pixel values are less than 255.

  Is there a better way to do it? Can I determine the number of bits of an image before loading in a buffer?

  Thank you!

  Hi Steverino,

  Olivia is incorrect... VDM has a function called GetFileInfo which does just what you want. It only reads the header of the image but does not load the entire image in memory. It will give you various properties such as the bit depth.

  I think that on the new .NET support, there can exist here: NationalInstruments.Vision.Analysis.Algorithms.GetFileInformation.

  Thanks to the ICB and our legacy of .NET support, it's probably a similar name.

  Eric

• How to determine the index of an item in a cluster?

  I have a small program that I put in place, as I'm just trying to get up to speed on Labview.  I have a boolean cluster buttons and for some reason the top button of the page is coming through as Index 3.  There are four buttons in the cluster, but for some reason, there has been a change.  The top must be Index 0.  How to do the things fixed?  I do not see how to determine the index of each button through properties.

  Thank you

  The order of items in a cluster is the same as the order that you added them. To change the order, just right click and select "rearrange controls in the group. If you use Unbundle by name, you don't care the order.

• Determine the number of traditional DAQ hardware using Labview.

  Hello

  Anyone can answer the question:

  Regarding materials traditional DAQ, for example the DMM OR-4060, how

  can I programmatically determine the number of device which can be seen in MAX?

  With the help of Labview 8.5, I looked into the following function libraries:

  NOR-DMM

  VISA

  NOR-ModInst

  None of the libraries above seem to provide access the number of traditional DAQ hardware

  property, which is automatically assigned.

  Background:

  I have a 18 PXI chassis containing 2 DMM, in housing 3 and 14.

  The DMM may be a mixture of type OR-4060 or NOR-4070.

  The system is controlled by a Teststand sequence employing IVI - DMM

  steps.

  When you set the IVI logical name step, I am referring to IVI device defined Sessions

  Max - rutime determined.

  Labview VISA functions using I can determine the model, i.e. 4060 or 4070.

  Because the DMM just locate into the slots 3 or 14, then the devices NOR-4070

  are accessible using the following descriptors of resources: PXI1Slot3 or

  PXISlot14.

  (The 4070 is compatible DAQmX.)

  So for devices OR-4070, I can predefine 2 Sessions of IVI device, knowing

  It will be sufficient for all occasions, when I run my Teststand sequence, which will be

  determine what device session to use at run time.

  But I'm stuck for the NOR-4060.

  At the Session of the device, I have to give a descriptor of resource the following

  format: DAQ::x (where x is the device number)

  I could create device 18 sessions each reference to a different DAQ::x, but to select

  the good pair during execution, I would need to programmatically determine the device

  number, i.e. the value of x.

  Where my question.

  The closest I came to a solution was an entry of the Knowledge Base that said that the

  Assigned device number would be the same as the slot number, providing the

  Number of the device had not previously configured manually.

  Unfortunately, our device numbers have been changed manually and maybe in the future.

  All popular solutions.

  Gary.

  Hi Gary,.

  Good afternoon and I hope that your well today.

  Thanks for your post and I want to help you solve your problems.

  I don't think there is just a function that you can use to identify and collect information on all cards with your. For traditional DAQ devices in particular I suggest using the Information.vi of DAQ devices get.

  If you look at this link,

  SAL posted an example VI entitled, find dev trad.vi.

  You can get information such as serial number, Dev name and the Base address.

  The assistance of the respective drivers to collect information you could generate an array of strings with the information that you need all the slots.

  Please let me know if this is useful at all,

• BSOD analysis using the auditor

  I get the BSOD and I checked the non-Microsoft files using the auditor.  Here's the .dmp file:

  https://onedrive.live.com/redir?RESID=B6ECAE13E4F038D8! 2404 & authkey =! AHPNp0xGKW6jshM & ithint = the file % 2czip

  Windows 7 x 64

  Corsair Vengeance 16 GB RAM

  EVGA GTX 970

  ASUS P8 Z77 - V LK

  Blue 1 TB 7200 RPM HARD drive

  If there is anything else needed please let me know and if I posted this in the wrong place, please let me know if I can post in the right place. Thank you

  Hello

  Please do not include the old minidumps. All that we need at the most are the latest 10.

  You, the problems are caused by mid-December 2015 Nvidia video drivers. Check with support from Nvidia,
  their documentation online and drivers and ask questions in the forums about known problems.
  <-- the="" solution="" to="" the="" bsod="" will="" come="" from="" those="" resources.="" it="" may="" be="" necessary="" to="">

  return to an older stable version of the Nvidia drivers.

  nvlddmkm.sys on 16/12/2015 Nvidia video drivers.

  BugCheck D5, {fffff98034e30e48, 1, fffff8800f88fe92, 0}

  WARNING: Unable to verify timestamp for nvlddmkm.sys
  ERROR: Module load completed but symbols can be loaded for nvlddmkm.sys

  Could not read the name of the problem driver
  Probably caused by: nvlddmkm.sys (nvlddmkm + 7f7e92)

  NVIDIA - drivers - use OPTION 1 to manually enter your info driver to get the most recent drivers.
  http://www.nvidia.com/download/index.aspx?lang=en-us

  NVIDIA Support - check with the support that she might be a known issue
  http://www.nvidia.com/page/support.html

  NVIDIA forums - also check for the forums it might be a known issue or others likely to have
  http://forums.nvidia.com/

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

• How can I determine the order of firstname and lastname?

  I get the name of the contact with the following code.

  BlackBerryContact contact = ...
  String[] name = contact.getStringArray(Contact.NAME, 0);
  String firstName = name[Contact.NAME_GIVEN];
  String lastName = name[Contact.NAME_FAMILY];
  

  But I can't determine the order - "full name, first name" or "first name, last name.
  With my Bold 9700, it can be configured in the Options > language and text input > name display, but I couldn't find a way to get the setting from java code.

  Please help me.

  There is no API for this setting. If you see as important, you could offer it to your own parameters, otherwise just go with the standard.

• 12.2.4 creating a requisition internal error (error of calculation of the tax: the system cannot determine the geographic information for this place and cannot be derived from a tax jurisdiction).

  Hi all

  I have created a new configuration of client and location. Now try to create IR and get below error.

  ----------------

  Error: The tax calculation: the system cannot determine the geographic information for this place and cannot be derived from a tax jurisdiction. Please contact your system administrator.

  --------------------

  I've made a few changes by looking at Doc-ID 1385936.1 and community discussions.

  Ran "Name geography program SEO" and the journal looks very good. No registration rejected.

  +---------------------------------------------------------------------------+

  From simultaneous program ' geo referencing worker name: 1'

  Start 08/07/15 07:44:56

  Treatment for the Table: HZ_LOCATIONS and run Type: ALL

  Parameters: Country Code: U.S.

  Use code: all THE

  Location Id: NULL: location Id: null

  Start date: NULL: End Date: NULL

  Number of workers: 1

  Total number of records of location of treaties: 7319

  Number of records managed: 7319

  Number of rejected records: 0

  Name of georeferencing process completed successfully

  +---------------------------------------------------------------------------+

  But still, I get the same error during the creation of IR

  Someone help me please by looking in the uploaded screenshots. Incase if any additional necessary information, pls let me know.

  This is related planning tests for this customer, I don't know about this part of the tax.

  Any help is really appreciated. Thanks in advance.

  Akshay

  PS: This is not the sensitive customer data.

  Hello Akshay,

  Can you please follow the note Transaction Workbench error: System cannot determine your location for information
  This location and cannot derive from a tax jurisdiction (Doc ID 438718.1) and see if that helps