BSOD analysis using the auditor

Similar Questions

• Re: BSOD after using the Toshiba Recovery disk

  Using the disk recovery works up until the point when the system starts up his game.
  I turn on the computer to configure the pc. The system will not complete the setting to the top. I either get a message unexpected problem and the pc tries once again, or I get the BSOD.

  Help!

  Hello

  What model of laptop do you have?
  Have you used the recovery disc in the past with success?
  Have you updated something on your laptop (RAM, HDD)?

• Aspire V3 - 571 G BSOD when using the dedicated graphics card

  Hey,.

  I just got my new laptop, but as the title suggests, whenever I try to run a program that uses the graphics card, it stutters a bit, before finally being BSOD'ing or saying "NVIDIA Windows Kernel Mode Driver display driver, Version 307.17 not responding and has successfully recovered."

  This happens even with own NVIDIA Control Panel program, where it gives you this small window of the NVIDIA logo rotating. I tried with Minecraft, just to make sure it wasn't this one program.

  Everyone has experienced this before or have any advice? Thank you very much in advance!

  PS: I would have presented a ticket of support on this issue, but it asks me to enter the date of purchase, but it keeps screaming at me that I need to enter "valid a date", even if I use the datePicker bit next to the entry field.

  I ended up sending the laptop in for repair, and apparently it was a faulty motherboard, so they changed it. Everything worked smoothly after that.

• [Need help] New Alienware X 51 BSOD when using the Ports of USB 3.0

  Hello world

  Today, I received my Alienware X 51.  After you set up the system, I plugged my external hard drive USB 3.0 one of the 3 USB ports on the back of the unit.  The system immediately blue armored and closed.  I let the system restart normally, only to find he Blue filtered and restarted again.  After the third BSOD, I deleted all devices on the computer and let it restart.  It has not crashed this time.  Always plug the devices back to demonstrated that when 3 USB hard drive was plugged into the system, the PC crashed.  I am able to reproduce this constantly: hard drive goes in, system hangs.

  I stayed on the phone with Dell technical support tonight, but all they could tell me to do is find another USB 3 device for test ports with.  Since I have none is available, I'm looking at the community of users for more help.  For the record, I managed to extract the files from BSOD dump.  Here is the latest in graphical format:

  

  Anyone seen this before?  My troubleshooting course consisted by uninstalling the driver for the Renesas Electronics USB 3 hub controller supplied with the system and reinstall the drivers using a package available on the Dell (http://downloads.dell.com/Pages/Drivers/alienware-x51.html) website.  It did not work.  I also tried to format the hard drive, but the BSOD persisted.  Needless to say, I am ideas.

  The drive works fine in a USB 2 port.  Of course, I am disappointed that I am not able to use the higher speeds of USB 3 port at this time.

  Anyone seen this before?  Any suggestions on next steps?  What information can provide this help?

  Thank you!

  I am surprised that this post was did not yet a member of Dell since there is a patch to do this, apparently, I had this problem when I arrived to an external hard drive a few days ago

  Remove the current driver for Renesas installed on your Alienware then click on the link below

  http://am.Renesas.com/products/tools/introductory_evaluation_tools/starterkits_evaluation_boards/usb_3_demo_card/index.jsp

  or just click here

  • RENESAS USB3 Host pilot 30230 setup.exe

  installation, this will fix the blue screen issue

• Satellite A200-14F: BSOD when using the FN keys

  Hey all and its not so mind my English.

  OK, I have problem with my laptop its Satellite A200-14F and when I press the FN button for toshiba flash cards, he appears just BLUE screen and it stops my computer!

  ANY HELP IS WELCOME. !!!
  Thanks in advance.
  P.S. I have instaled the new aded value pack and cards flash driver (thast at the start of all the problems)

  Great!

• Analysis using the extractvalue XML method

  Hello
  In the XML message I want to extract values in the brochure below. That is to say john and peter
  
  Select EXTRACTvalue (xmltype ("<?")) XML version = "1.0" encoding ="utf - 8"? >
  < startempdetail >
  < empDetails >
  < empDetail >
  John < name > < / name >
  < / empDetail >
  < empDetail >
  Peter < name > < / name >
  < / empDetail >
  < / empDetails >
  ((< / startempdetail > '), ' / startempdetail/empDetails/empDetail/name ")
  Double;
  
  its not work if only john. Can someone help me solve this problem?
  
  Thank you!

  ExtractValue returnin only acronym row.

  Try this please

  SELECT
  extractvalue
  (EXTRACT(xmltype('
  
  
  
  john
  
  
  peter
  
  
  '), '/startempdetail/empDetails/empDetail/name'),'/name[position()='||level||']')
  from dual connect by level<=2;
  

• 7520 all-in-One: 7520 all-in-One scanning now a straight line of the page when using the ADF

  A week ago I noticed that the analyses using the ADF put a black line about an inch from the right edge of the page.  This will not occur during the analysis of flat glass; only when you use the ADF.  I checked the glass and paper tray are clean and free of debris.  I wish that it there a way to display an image of what I'm talking about.

  The line is about the thickness of a vertical margin of Notepad and gray line.

  Someone at - it ideas other than buying another printer?

  BINGO!  That's all.  The glass was dirty.  Thank you very much.

• Cannot correctly use the mouse, bomb found in virus scan of archives.

  Original title: How can I find the location of a bomb of archive on my Windows XP and remove it before it totals the rest of my system?

  I noticed my XP acting crazy for the last 2 days. Mouse jump around. As someone who is in my net work by remote control. Did a scan with Avira Anti vir and found a bomb warning of the archive in the results of the analysis.

  Is there anything out there on the market that CAN HELP? Or I'm screwed?
  I have an old CD to repair that I just put in. For now, I have the use of my keyboard and mouse, but do not know for how long. Helllllllllllllp.

  Hello

  You did changes to the computer before the show?

  Try to perform an analysis using the Microsoft safety scanner.

  Microsoft safety scanner

  http://www.microsoft.com/security/scanner/en-us/default.aspx.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

• Analysis of the BSOD

  Hi all

  I've been making BSOD every few days.  I analyzed a memory full dump and found specific things that lead me to think that I can be infected by malware.  As I am new to the analysis of the BSOD, I'd be happy to get your insight as it seems logical or not and what other steps can I take by completing the analysis.  Here's the info from the analysis:
  3: kd >! analyze - v
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  IRQL_NOT_LESS_OR_EQUAL (a)
  An attempt was made to access an address pageable (or completely invalid) to a
  application interrupt level (IRQL) that is too high.  It is usually
  caused by drivers using a wrong address.
  If a kernel debugger is available, download the stack trace.
  Arguments:
  Arg1: fffff680000198c0, memory referenced
  Arg2: 0000000000000000, IRQL
  Arg3: 0000000000000000, bit field:
  bit 0: value 0 = read operation, 1 = write operation
  bit 3: value 0 = not an enforcement operation, 1 = performance operation (only on chips that support this level of State)
  Arg4: fffff80002de9a66, address memory

  Debugging information:
  ------------------

  READ_ADDRESS: fffff680000198c0

  CURRENT_IRQL: 0

  FAULTING_IP:
  NT! MiGetWorkingSetInfo + 286
  fffff800'02de9a66 488b 0408 mov rax, qword ptr [rax + rcx]

  DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

  BUGCHECK_STR: 0XA

  Nom_processus: svchost.exe

  These two related AVGIDSFilter.sys ID Application activity monitor filter driver. by AVG Technologies

  I notice that you have of moy.
  AVG can be a cause of BSOD.
  Please remove and replace it with Microsoft Security Essentials
  http://www.Avg.com/ww-en/utilities'] download tools and utilities | AVG worldwide

  http://www.Microsoft.com/security_essentials/ "] Microsoft Security Essentials - free Antivirus for Windows"

  Error checking 24, {c08a5, 0, 0, 0}
  Probably caused by: avgidsfiltera.sys (avgidsfiltera + 1 b 88)

• The listener is down: even if a listener with the name "AUDITOR", is running on this host at the port: "1521", it has not started using "the target LISTENER. ORA file.

  
  I moved a listener on a host in a House different oracle. The headset works fine, but EM 12 c shows that the listener is down with the following summary:

  The listener is down: even if a listener with the name "AUDITOR", is running on this host at the port: "1521", it has not started using "the target LISTENER. ORA file. CORRECTIVE ACTION: To monitor this "EM listener target" with its current configuration, you must stop the process of listening running and start it using the Listener parameter file: opt/oracle/product/12.1.0.2/network/admin/listener.ora. Alternatively, you can update "this target LISTENER. Location ORA setting"with the location of the listener running, which started using the: opt/oracle/product/11.2.0.3/network/admin/listener.ora.

  EM 11 g, I simply changed the configuration of the listener for the different oracle home, argued the change and in a few minutes the listener would show that 'UP' with the oracle of new home. I upgraded to MS 12 c (12.1.0.4) and can't find how to do this. Can someone give me the procedure.

  Thank you

  Ron

  Hi Ron,

  Can you please do the following?

  -Create a for the listener listener.ora file, stop and start the receiver using the listener.ora file. If the file is located in a default location, set the TNS_ADMIN environment variable to that location before you start the listener.

  -Log on to the EM console, go to the homepage of the listener.

  -In the Oracle Listener menu, select target Configuration > Configuration of the analysis.

  -Ensure that the parameters, including the Listener.ora directory, are properly.

  Kind regards

  -Loc

• Satellite A100-549: BSOD after I used the recovery from another PC

  Hello.

  Had a few probs with my laptop and decided to recover it using another pc recovery disc.
  I get the laptop is a Toshiba a100-549. Unfortunately for some reason I can't disks that were originally with her.

  The opertaing system is Windows xp. The disks I got with a Vista.
  It loads OK but goes to a blue screen after 30 seconds and restarts. Is there a reason for this and can I do.

  I think I may need to get your hands on a good drive and load it on again.
  Someone at - it copies of drives for this laptop and able to send me their. I'll gladly pay for them...

  Colin

  Hello

  Don t user recovery drive to another PC, because it won't work.
  You can use a clean Windows OS disk or the Toshiba recovery disc.

  Why? Because the recovery disk contains an image. The image is a package containing a Windows OS, drivers and other software.
  If you want to use the recovery from another PC disk then all the drivers, tools and software distributed for this PC will be loaded on your Toshiba laptop.
  This can cause the BSOD!

  So if you n t have the Toshiba recovery disc then you should use MS Windows CD!
  Toshiba drivers can be downloaded from the Toshiba page!

• Satellite A660: After upgrade to Win 8.1 BSOD is displayed using the keyboard

  Dynabook i7 3D laptop A660.

  OK; so I updated my i7 3D Dynabook to form 8.1 Windows (x 64) Windows 7 (x 64), and now the laptop restarts everytime I start to touch the keyboard.

  Other wise works perfectly.

  It took me two hundred hours to understand that I was typing on web sites usually when this re-boot occurs. And I could not remember how or why the computer restarted.

  When I press the numeric keypad 'more' sign, I get the BSoD immediately. But there are a few presses of the numbers on the keyboard so he can do the same thing.

  I.E.
  If I press 1, 2, 3, its ok.
  But
  If I press 1, 2, 3, 4, 5, 6, 7, the laptop gets a BSoD and restarts.

  I also installed automatic software (mouse) for a Microsoft mouse, that I was going to use. and I deleted in the "System Properties" after the problem has arisen; but there is no change.

  Whenever I tap on the number pad (especially the plus sign), the PS stops with a blue screen of death BSoD.

  Any ideas?

  Hi Roger,
  My knowledge the 8.1 Windows isn't supported by Satellite A660 because there is no driver Windows 8.1 special to this series of portable, but even if these drivers have not been released, is not a big problem to install and run the Windows 8.1 on this unit.

  I m wondering how you installed the 8.1 to win on this laptop?
  You upgrade Windows 7 to 8.1 Win or were you running a fresh install of Win 8.1?

  Here's a nice page of Microsoft providing some FAQ about update for Windows 8.1
  [Windows 8.1 update: FAQ | http://windows.microsoft.com/en-US/windows-8/upgrade-to-windows-8]

  In case you have done an UPGRADE to 8.1 Win, you can use Windows 8.1 Upgrade Assistant to check if your programs and devices are compatible with Windows 8.1.

  I would be also interesting to know if the same BSOD would appear if external keyboard would be connected to the laptop.
  When using the external keyboard would cause NOT of BSOD, I guess internal keyboard is faulty and could be the troublemaker.

• Satellite A60 crashes with BSOD using the WLan connection

  Hello

  The son laptop works well 24/7 If you use the local cable network on web access, but as soon as we install Wifi it crashes on a regular basis (2 or 3 times an hour) with BSOD error messages - normally those helps Microsoft cant (via the event viewer report) with but it is often talking about Toshiba phone services but no solution.

  Tried two (netgear) pcmcia & usb (agere) wifi cards - exactly same problem can not maps.

  In desperation re-formatted & resettled Xp & all drivers Toshiba of original Cd of Tosh, then Xp Sp2 & then all the updates/fixes engineering including the bios from site Web of Tosh. Still crashes.

  If the software has - v installed or not makes no difference.

  A 512 extra ram on top of 256 original.

  Any ideas?

  Please believe me that it is not easy to say why the BSOD appears!
  From my personal experience, that the BSOD can occurs because of the problem of critical software, or because of the problem of equipment.

  In your case, it looks like a hardware problem (this is my personal opinion)
  Generally, the laptop should work with the external WLan USB card. I put t see no reason why it shouldn't work t.

  You said that you have updated the RAM on this laptop, I noticed on many laptops than similar issues after a RAM upgrade.

  For example; I inserted the new 1 GB RAM on my old Satellite and received a BSOD. I used a compatible but the BSOD appeared sometimes.
  After the passage of the modules to another location memory my laptop works properly!

  Please check this box. Maybe you could check if the same thing happens with your old module!

  Good luck

• On Mac, how to scan multiple pages to a pdf file using the analysis of the glass?

  Mac OS x v10. 7, how to set up analysis of the HP Officejet 6500 multiple pages in a single pdf of the file by using the analysis of the glass?

  I couldn't find the box uncheck the box to 'Save as individual file' to the Mac.

  My reccomendation is to use the Image Capture in your Applications folder.  Choose your scanner to the left, then click on "Show details" on the bottom.

  Choose the PDF format, then check the box for "combine several pages into single file" (or similar words).

• I can get the data of a hygrometer using the RS232 port with the following T75.2F:H17.0% using a RS232 data logger format. I was wondering if I can collect this data for later analysis using Dasylab. Any help is appreciated.

  I can collect data from a hygrometer in a text file using the RS232 port with the following T75.2F:H17.0% format, these data are collected using a data logger software. I was wondering if I can collect this data for later analysis using Dasylab. Any help is appreciated.

  The setting below causes the error. Change for the second selection, output values of all channels.