Satellite L670 - 1 FT - Crash at startup video

Similar Questions

• Satellite L670-1J0 - YouTube videos full screen

  Hello

  When I go to fullscreen on youtube the image becomes pixelated. Now with 720 p videos that I thought when I change my resolution of 1280 x 720, it solves the problem, but for 1080 p and regular videos (p. 320, 480 p) I do not know how to correct blurry images. It is interesting to note that this is only a problem with youtube, other parts contained find on media players.

  The model I have is the Toshiba Satellite L670-1J0.

  Thank you

  Jason.

  Hey,.

  The problem with 320p and video 480 p t, you can solve because the screen resolution is too low.

  Normally, if you use the screen resolution native to your screen with 720 p and 1080 p videos must have a good quality but it s also depending on the video itself. Medium HD resolution isn't always good quality, the resolution isn't everything.

  To be honest it is really hard to say something about this and I think that everything is ok with your laptop, but you can try to update the display driver. Latest version can be downloaded on the official page of Toshiba.

• Satellite L670 - 1 H 9 - accidents down when e.g. to open a video on youtube

  * Problem: * I bought a new Satellite L670 - 1 H 9, a few weeks ago and I have problem from the beginning: when I open a video on youtube, my laptop freezes and 2 seconds later, the screen is black and a PT noise is audible. I can't do anything but closing the laptop by pressing the stop button. The problem now appears on the other side, too, but not all sides where I can watch videos. Even if I'm just visiting some sites like imdb.com TI someetimes happen. Only on youtube, I can say it is allways.

  I already installed a new version of flash player, thinking this may help, but it didn't. I had a look on different websites in the hope of a solution, but could not find anything.

  I would be really happy for help or advice.

  Hey,.

  That s independent really strange about this problem, everything works correctly and you have this problem when watching a video on Youtube, right?

  Well, I think that other things would be important to know:
  -What operating system you are using? Is this the version preinstalled Windows from Toshiba?
  -What internet browser do you use to watch these videos?

  Theoretically, it could be linked to the display driver have you already tried to update this driver?

• Satellite L670 - 1JP external HDD not recognized at startup

  I bought an external hard drive Samsung G3. The first time I plugged it, it was directly recognized by my Toshiba Satellite L670-1JP and worked without any problems.

  But later almost whenever I start my computer, it is not the external hard drive. Then I have to disconnect reconnect en USB connection several times to make it work.

  It is your time, so how can I solve this problem?

  Hello

  Other USB devices work properly in the laptop Satellite L?

  Have you tested this disk external DRIVE with other computers/laptops?

  I think that you should do this because it might be an external HARD drive failure.

  Check it!

• Firefox crashing on startup - 40.0.2 on Lenovo T450s

  Crash ID: bp-eee4103b-b29d-45bc-958c-a6aa12150819

  Updated Firefox 39.0.3 to 40.0.2, and it crashes at startup (even in safe mode). Roll back to 39.0.3 works very well.

  The latest Intel 5500 were provided by Lenovo with drivers of the video card installed (10.18.14.4206)

  The report of incidents reported these programs;

  sysfer.dll = Symantec CMC Firewall

  IPSEng32.dll = Symantec's Intrusion detection

  IPSLdr32.dll = Symantec's Intrusion detection
  +++++++++++++++++++++++++++++++++
  It's for the Sumo
  Related bugs

  1181091 NEW - 40 Firefox crashes at startup [@ @0 x 0 |] [ScopedXPCOMStartup: ~ ScopedXPCOMStartup ()] with the endpoint of Websense

  Type of topic: addons< enter > in the address bar to open your add-ons Manager.
  Access key; < Control >(Mac: < command >)< shift > has)

  In the Manager of Add-ons, on the left, select Extensions.
  Turn off the Norton, toolbar and then restart.

  Is always the problem?

• 10.2.3 crash at startup

  Since the update I get a crash at startup or when you choose a template. I tried to create a new user and with the new logical user not crushed (seen a video on youtube on this subject). Anyway to fix that works in my usual user?

  I suggest that you download the app free "FCS Remover" (digitalrebellion.com) and use it to uninstall LPX.  Reset.  Launch of the App Store, in the purchase section, find Logic Pro X and click install.

• Satellite L670-1EE - reinstallation of Win 7 - key not readable series

  Hello

  I bought a Toshiba Satellite L670-1EE January 2011
  Now the system completely crashed and I need to reinstall from scratch.

  My problem is, that the first 5 digits of the product key Microsoft are not readable.

  Are there opportunities to get the key, or can I use a special image of Toshiba to retrieve?

  I can't access the installed windows, fails to start, I tried a recovery with a DVD of victory but it didn't work, so I need to reinstall it.

  > My problem is, that the first 5 digits of the product key Microsoft are not readable.
  This key cannot be used as part of the new Windows 7
  It is an OEM key that belongs to the image of Toshiba. For the most part, these keys don't work.

  The point is that Toshiba preinstalled system has already been activated in the image of the Toshiba.
  But there is no need to be activated after the recovery procedure.

  So if you want to use the own system of Windows, you must purchase a license from Microsoft.
  In case you want to use the image of Toshiba, you must use the Toshiba Recovery disk that probably, you have not created in the past. Right?

  In this case, there is another option: you can order this disc from here:
  http://backupmedia.Toshiba.EU/landing.aspx

• Satellite L670 - Media Player can't read DVDs

  I got this Satellite L670 for a few weeks and this is the first time I tried to play the DVD on it. I get messages saying "media player cannot play the dvd because not possible to activate the analog copy on the output display protection." Try to install a driver available for your video card.
  What should I do about it?

  I bought this for playing DVDs on the run which is very annoying. It burns very well on dvd.

  Hi nigel63,

  Have you tried another player rather Windows Media Player? I have good experience with VLC media player as it can play most audio and video files. He the freeware tool and really great, I can't recommend it:
  http://www.videolan.org/VLC/

  In addition the message looks like you want to play a copy of the DVD. Have you tested with different original DVD?

• Satellite L670 - CDs and DVDs do not work smoothly

  Hello!

  I recently bought a Satellite L670 and there is a problem with the DVD player: CDs and DVDs do not work smoothly, there is a lot of audio and video clippings.
  I uninstalled the driver for DVD drive and reboot the laptop, but it has not solved the problem.

  Could someone help me with this?

  Greetings from France!

  With cups, you mean peak and its gel for a second, right?

• Satellite L670-1KZ - update driver & problem with game ARMA II

  Hello world

  I just bought this satellite L670-1KZ in France, and I've already found fews updated.

  But, before you do anything, I want to have comment and recommendation of other owners, to ensure that the files that I have are useful and cannot be damaged something (never know).

  (1) UPDATE RECOMMENDED OR NOT?

  It's the list of the update that I found:

  ATI Mobility Radeon HD 2000/3000/4000/5000/6000 version 11.3 WHQL
  Manufacturer: ATI Technologies Inc.
  Version: 8.831.2.0000
  The name of the inf file: c7115930.inf
  Of date inf file: 03/08/2011
  Date of publication (online): 30/03/2011

  Version of Realtek driver High Definition Audio R2.57 WHQL
  Manufacturer: Realtek Semiconductor Corp.
  Version: 6.0.1.6299
  The name of the inf file: hdapcee3.inf
  Of date inf file: 25/01/2011
  (Online) publication date: 02/09/2011

  Realtek RTL8100/8101/8102/8103/8105/8401/8110/8111/8168/8169 version 7.037.1229.2010 WHQL
  Manufacturer: Realtek
  Version: 7.037.1229.2010
  The name of the inf file: rt64win7.inf
  Of date inf file: 29/12/2010
  (Online) publication date: 02/09/2011

  Realtek RTL8191SE-VA2/RTL8192SE version 2019.1.1203.2010 WHQL
  Manufacturer: Realtek Semiconductor Corp.
  Version: 2019.1.1203.2010
  The name of the inf file: net8192se.inf
  Of date inf file: 12/03/2010
  (Online) publication date: 02/09/2011

  Intel Chipset Device Software version 9.2.0.1025 WHQL
  Manufacturer: Intel
  Version: 7.0.0.1013
  The name of the inf file: ibexahci.inf
  Of date inf file: 06/08/2010
  Date of publication (online): 03/09/2011

  Intel Rapid Storage Technology ICH7/ICH8/ICH9/ICH10/PCH version 10.1.0.1008 WHQL
  Manufacturer: Intel
  Version: 10.1.0.1008
  The name of the inf file: iaahci.inf
  Of date inf file: 11/06/2010
  Date of publication (online): 12-21-2010

  (2) ON THE VIDEO CARD:

  Also, I used an Amilo Xi 2550-8009 underpinning last week, I changed it to this Toshiba, but I am facing a problem with a game ARMA II.
  I got the error message is: 'Pixel shader compilation error', with a black screen and sound of 'ping '.
  I don't understand because I found a comparison test with a GeForce and my current HD5650 which is supposed to support this kind of thing shader.

  Have you managed to run ARMA II on your laptop? If so, what did I miss?

  Thanks in advance for your comments have fully appreciated,
  G2MARS

  Hey,.

  Generally these driver updates are not important if everything works properly. So in your case I don't install these updates if your laptop runs without problem.
  As you probably know: never touch a running system ;)

  Regarding your second question:
  Have you checked if ARMA 2 supports this graphics card? Have you installed the latest DirectX and more recent patch for this game?

• Satellite L670-1jQ - HDMI problem

  Hello

  I bought a brand new Satellite L670-1JQ especially for the blu - ray, HDMI output. I also have a screen 42 "flat with HDMI input jack.
  The meaning was to play a blu - ray on the laptop drive and transfer the video to the flat screen.
  When I connect the laptop to the flat screen, I can duplicate or extend the desktop. This isn't the problem. The problem is when I move Corel WinDVD BD from my office to the flat screen I see the screen reader but not video, and when I move the player back to my office, that video is displayed again.

  Which is in expansion mode. When I try to open WinDVD on the desktop a copy on my flat screen, then sometimes nothing happens at all! I'm doing something wrong? Or the game can't handle the flat screen?

  As far as I know that this player will never work on extended display. The reader works only on LCD.
  To be honest I don t understand why you use extended desktop when you want to watch movies.
  After you connect your screen, use the FN + F5 key combination and switch to the TV only. Start the movie and the BD player. When the film starts to put the player mode full screen and enjoy the movie on the TV.

  Extended display will work perfectly when you work with some applications but there must be a graphical limitation and with BD player will not work.

• Bluescreens and satellite L670-12J slow start

  Hello
  I have a new laptop and the ends of the return policy 27 so I need quick help here.
  Got a new laptop from Amazon nearly a month ago.
  Toshiba Satellite L670-12J with 64-bit Windows. Processor i5, 4 GB memory and 500 GB hard drive.

  Since I got it, every time I turn it on it shows a black screen with a _ in the upper left corner of the screen. It takes 30 seconds to 2 minutes before it makes it to the login screen. It should not take anywhere near that for a laptop with these specs.

  In addition, there many Bluescreen. Sometimes a few times a week to 5 times a day. It's completely cause and that the computer is running any specific program when it occurs. It happened even when the laptop did nothing. I scanned it a few times with Windows and other programs, but they have never found anything.

  The blue screen remains upward on the screen for a few seconds then closes its doors until I read this.
  Even though I remember reading something like KERNEL_DATA_INPAGE_ERROR. Or something like that, but then I had a different message the next time (I think). Sometimes he says things about the MEMORY, but it is so fast that I can not read properly.

  As far as I know the latest drivers are installed and the latest version of the BIOS is installed.

  I really need your help guys and fast. Thank you.
  Ewen :)

  Hello

  After reading your ad I can't say for sure what the problem is here, but the best thing you can do is to install the OS by using the recovery disk (F8 at startup) mode or use recovery DVDs if you have created a.

  Reinstall the OS and test or two days with preinstalled OS clean and without some additional software. If the problem persists the best thing you can do is to contact the nearest service Toshiba and ask for help.

  I mean what you can do if the problem persists with the factory settings?
  Something like that shouldn't happen.

• PE-12 crash at startup after Windows 8.1 update

  PE-12 don't start-up-hangs at startup after a WindoUpdate ws.

  

  PE-12 new projects and existing projects are not open.

  my laptop specs:

  TOSHIBA Satellite P75 - A

  WINDOWS 8.1

  Intel Core i7-4700MQ CPU @ 2.40 GHz GHz 240

  8 GB RAM

  64-bit OS, x 64 processor

  uninstalled Windows 8.1 recent updates... PE - 12 always crashes on startup. Found the .prf file. deleted it and viola! PE - 12 start and operate normally. Just a coincidence that updates Windows 8.1 had recently been installed. Should have gone for the easy solution, right from the beginning.

• Adobe first Pro CC crashes on startup after upgrading to new computer screens

  Hey everyone, I'm tech-savvy so go ahead and throw detailed responses to me. I've recently updated for Windows 8.1 because first Pro CC (version 7.2.1) crashed at startup of Windows 8. After the update to Win8.1, it worked fine with my old 19-inch full-screen VGA monitors. However, after I installed the new HD widescreen monitors yesterday, I opened the first Pro and it starts very well and is stable until he treats a video file. If I'm fast enough, it will correctly import a file from the media browser, but as soon as it 'deals' video in the browser media or video in the timeline, Windows gives me the error "Adobe Premiere Pro CC has encountered an error and must be shut down". I tried all the tricks in the book, especially to change the refresh rate of the monitor down from 144 Hz to 60 Hz, tried to use an HDMI instead of DVI - D cable and tried to reinstall Premiere Pro (restart the computer to the appropriate in the process places) and tried to adjust to return with no acceleration GPU (only the mercury software). Nothing seems to work. Here are the specs of my computer:
  CPU: AMD FX-8120, GPU: 1 GB GDDR3 Dual AMD Radeon HD 6670 each in its own monitor output via DVI - D Dual Link, the monitors are ASUS VG248QE 24 "resolution 1920 x 1080 p @ 144 Hz, 7200 RPM Western Digital HARD drive running.

  TRY:

  Disable a video card driver.

  Set up 2 monitors of the same card.

  Its a starting point for troubleshooting I.

• SOUL CC crashing at startup least 10.9 Mavericks

  Hi all!

  Media Encoder suddenly started to crash at startup.  I work on a Mac Pro with OS 10.9.  Everything worked great yesterday.

  * edit * on first launch this morning, am went to encode a file ProRes422 HQ for BluRay, but in the window of export settings, the settings of the source said that there is no video.  The file played fine in QuickTime format.  I quit, tried to update.  The update failed. I've deleted and reinstalled.  Now the SOUL crashes immediately on startup. Any help would be greatly appreciated!

  I uninstalled and reinstalled first family CC and about uninstalling, checked the box to remove preferences.

  Here is the crash report, I get:

  Process: Adobe Media Encoder CC [2672]

  Path: / Applications/Adobe Media Encoder CC/Adobe Media Encoder Media CC.app/Contents/MacOS/Adobe encode CC

  ID: com.adobe.ame.application

  Version: 7.1.0.174 (7.1.0)

  Code type: X 86-64 (Native)

  Parent process: launchd [182]

  Responsible for: Adobe Media Encoder CC [2672]

  User ID: 501

  Date/time: 2013-11-14 13:01:21.781-0800

  OS version: Mac OS X 10.9 (A 13, 603)

  Report Version: 11

  Anonymous UUID: 7865F7DF-5D62-99CC-E77B-5CB33788BDA7

  Crashed thread: 0 dispatch queue: com.apple.main - wire

  Exception type: EXC_CRASH (SIGABRT)

  Exception codes: 0 x 0000000000000000, 0 x 0000000000000000

  Request for clarification:

  termination with eception exception of type dvacore::filesupport:dir_create_exception: $$$ / dvacore/filesupport/DirCreate = the directory ' @0 ' could not be created. " Please check the rights of protection or permission from parent directory.

  Abort() called

  Thread 0 crashed: Dispatch queue: com.apple.main - wire

  0 libsystem_kernel.dylib 0x00007fff8676b866 __pthread_kill + 10

  1 libsystem_pthread.dylib 0x00007fff82d8b35c pthread_kill + 92

  2 libsystem_c.dylib 0x00007fff82f6abba demolition + 125

  3 libc ++ abi.dylib 0x00007fff8c700141 abort_message + 257

  4 libc ++ abi.dylib 0x00007fff8c725aa4 default_terminate_handler() + 240

  libobjc 5. A.dylib 0x00007fff8ca9f322 _objc_terminate() + 124

  6 libc ++ abi.dylib 0x00007fff8c7233e1 std::__terminate (void (*) ()) + 8

  7 libc ++ abi.dylib 0x00007fff8c722e6b __cxa_throw + 124

  8 com.adobe.dvacore.framework 0x0000000100224bdd dvacore::filesupport::DirHelper::Create() + 813

  com.Adobe.dvaworkspace.framework 9 0x0000000104ed4c23 dvaworkspace::workspaceutils: :utility::SmallBlockAllocator:STLAllocator < unsigned short > > &) + 115

  10 com.adobe.ame.application 0x00000001000075de SOUL::app::AMEApp::InitWorkspaceManager() + 78

  11 com.adobe.exo.framework 0x000000010507a748 exo::app:AppBase:Initialize(exo::app::AppInitArgs&) + 1000

  12 com.adobe.ame.application 0 x 0000000100012998 AME::RunTheApp (exo::app:AppInitArgs, & std::vector < std::basic_string < unsignedShort, std::char_traits < unsigned short > dvacore::utility:SmallBlockAllocator:STLAllocator < unsigned short > >, std::allocator < std::basic_string < unsignedShort, std::char_traits < unsigned short > dvacore::utility:SmallBlockAllocator:STLAllocator < unsigned short > > > > &) + 1576

  13 main 0x0000000100054e08 com.adobe.ame.application + 424

  14 com.adobe.ame.application 0x0000000100002ff4 start + 52

  Thread 1: dispatch queue: com.apple.libdispatch - Manager

  0 libsystem_kernel.dylib 0x00007fff8676c662 kevent64 + 10

  1 libdispatch.dylib 0x00007fff8cc4243d _dispatch_mgr_invoke + 239

  2 libdispatch.dylib 0x00007fff8cc42152 _dispatch_mgr_thread + 52

  Thread 2:

  0 libsystem_kernel.dylib 0x00007fff8676be6a __workq_kernreturn + 10

  1 libsystem_pthread.dylib 0x00007fff82d8bf08 _pthread_wqthread + 330

  2 libsystem_pthread.dylib 0x00007fff82d8efb9 start_wqthread + 13

  Here is a document that describes how to set the permissions on the Adobe folder in the preferences. This should solve the problem.

  http://helpx.Adobe.com/creative-cloud/KB/AME-premiere-crash-launch-export.html