determine the size of the components after change

Similar Questions

• Bridge does not refresh the thumbnails after changes in ACR.

  Bridge does not refresh the thumbnails after changes in ACR. Cultures made in ACR do not show more. I think it started after new ACR update. I have the last bridge and ACR and Photoshop.

  I thought about it. I have reset the settings of the bridge by pressing Command-Option-shift and then started bridge on my Mac. I lost my sight, I got but should display what I want to see again. But it solved the problem of the bridge not updated after modified ACR.

• HP 200 MFP M276nw not seen in the network after changing router

  Printer: LaserJet Pro 200 color MFP M276nw

  LAN: both PC (Windows 7) and the printer connected to the router.  Other devices connect wirelessly.  Internet service is cable.

  I installed this printer when a router Linksys E2500 was in use.  The configuration of the network after the installation of the printer:

  IPv4 address: 192.168.1.120

  Subnet mask: 255.255.255.0

  Default gateway: 192.168.1.1

  Configured by IP: DHCP

  I replaced the router Linksys with a Netgear WNDR4500 router (N900) a month ago.  Everything worked fine for about two weeks.  All of a sudden, jobs sent to the printer began to take a long time to start to print until they stopped printing altogether.  The printer does not appear as a device plugged (cable) in the interface of the router on the Web.  Not even the HP Print or HP Print software and the Scan doctor could find a printer is connected.

  I have unisntalled and reinstall the printer, but did not succeed until I changed the Ethernet cable connecting the printer to the router.  The difference is that the old cable Cat5e and replacement a Cat6?  It's printing and scanning now but the printer is still absent as a wired device, and I fear that it will stop working once more.

  I noticed that the network configuration of the printer after reinstalling is:

  IPv4 address: 169.254.230.140

  Subnet mask: 255.255.0.0

  Default gateway: 169.254.230.140

  Configured by IP: AUTOIP

  Research on the Web, I found an article saying that AUTOIP could be a sign of problems of router or a cable.  My suspicion is that the IP address of the printer is constantly changing and this is the reason for the delay of printing.

  My questions to the experts are: I could assign an IP address to the printer manually so I can add it in the router - it provides to this effect- and how this is done?   In the Toolbox of device HP under the IPv4 Configuration, there is a dropdown menu with different options - DHCP, BOOTP, AUTOIP, and manual, but I don't know if the changes are made here or if it's a more complex undertaking.

  Thank you very much.

  Kind regards

  Miguel remainder

  I solved the problem, the same day I posted the request for help.

  I've closed everything down - including the cable modem and router - but left the printer.  Go to the printer control panel and changed is manual configuration IPv4 of AutoIP toe.  I had already selected an IP starting with 192, since I read that starting with 169 IP addresses are associated parameters AutoIP.  From there on, the printer has presented a valid subnet mask addresses, I took one, and a default gateway address.  Then I stopped the printer.

  I turned on the modem, router, pc and printer.  The router then showed the printer as a device connected with his newly assigned IP address.

  I figured that the cable was not a problem here, so I put the Ethernet Cat5e cable.  What baffles me, is why the printer changed to AutoIP because it was not made by any user.  Check the reports printed during the first installation of the printer, I see that the method of IP in DHCP address.  After putting in the new router, changes were to name SSID and password in wireless devices and found the firmware of the router.

  It was learning by trial as I'm not a computer expert, but so far, we print and scan documents.

  Thanks to all who took the time to read the post and offered help.

• Unable to perform the backup after changing the password for SYS

  Hello everyone, I'm getting the "unable to perform the backup because the database is closed" error after performing a backup scheduled on the database. The database is clearly open, already tried rebooting the database/system, but without success. This is probably related to the very recent change of password for SYS. As we changed it, we were able to run the backup... Can I ren hollow backupset backup RMAN command, but without success with Enterprise Manager.
  
  Does anyone have an idea? Thank you!
  
  
  ATT,
  
  Gabriel.

  Have you updated the password in addition to credentials on the OEM... Otherwise, please update and try again.

• Can not reinstall the software after change of hard disk

  My old hard drive failed on me last week, so I had to buy a new one. I want to reinstall my suite adobe CS5.5, but the computer just spits the disc after a few minuets. What I am doing wrong?

  I have a mac book pro, mid-2009, with Snow leopard OS x 10.6.8

  You can work around the disc and download the free trial from the page linked below.  Then use your serial number to activate the software to use fully.

  Don't forget to follow the steps described in the Note: very important article Instructions on the pages to download to this site or the download may not work properly.

  CS5.5: http://prodesigntools.com/adobe-cs5-5-direct-download-links.html

  If it works, then there may be a problem with the configuration of your hard drive.

• The icon file size will not remain after changing

  On the folders on my computer I like a size of specific icons since I bought my computer 2 years ago, I was able to change the size of the icons of files and it stayed like that.  Now if I change the size of icons it will stay like that until I close the file and reopen it.  Whenever I have open and close a file, it causes the size of the icons for items in the default folder for the "details".  This happened recently, after I installed updates to windows.  These updates were important and I don't want to uninstall it, just to get my favorite file size.  Does anyone know how to prevent the default of payment of a certain size icons?

  Hi Ocman76,

  If the issue is not past in your guest account, it could be that your user profile might be corrupted.  Take a look at the article below, with the steps to solve the problem:

  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  I hope this helps!

• NB550D - 10G - do I lose the warranty after change of HARD drive?

  I would like to change the HARD drive in my Toshiba NB550D - 10G for one SSD drive.
  Could someone tell me if I lose my warranty after doing this? I would also like to know evolves from 1 GB ram to 2 GB would indeed lose the warranty?

  Thanks for the help!

  No, I think that you that the warranty would be unaffected if you remove and replace the HARD drive.
  The HARD drive and memory are parts extensible user and replace this part will not void the warranty.

• DASYlab crashing with the beginning of the worksheet after change of RS - 232

  After a change in my RS-232 output of the modules to the correct COM port (I use two) dasylab crashes instantly. I use a serial port to control a stepper motor and the other to interrogate a dynamometer. I can not for life, to understand why its plant, or that there is no reason for it crashing. I use the ttl generators to trigger actions who then spend my terminal commands (stored in global chains) series of my series devices. My ttl generators are runner reasonable enough cycles, so I don't think it's a memory dump. Help!

  Thank you. -Kyle

  Please call Measurement Computing at 508-946-5100, x 2 and to seek assistance.

  Be prepared with your serial number, version, information about your computer and your spreadsheet.

  If you want to try the service pack first, DASYLab please download from ftp.mccdaq.com/downloads/DASYLab/DASYLab_10.0_Service_Pack_2. It is not a full installer, but a zip file with the replacement files. Information on the resolved issues are listed in the Readme file in the folder, but even if your problem is not listed, it is interesting to try it.

• Cannot recreate the listener after changing the ip address and the name of the server

  Hoping someone can give me some ideas - I do not know what else to try.

  I run a 11.2.0.4 database on windows 2012.  I just got back my database to a new server and am trying to rename the server and assinging the new ip address.

  I stopped all the oracle services and change my servers ip address and name.

  Then, I dropped the listener who has been spending more time than it should have, but when I checked that the service has been removed.

  When I try adding the listener it hangs right on "would you like to configure another auditor?

  Then, I realize very quickly that I forgot to change the environment vairable HOSTNAME and the TNSNAMES file.  I cancelled the wizard still Net and

  fixed files and tried again.  The continuous Wizard to crash at the same place - never time - just hangs.

  Does anyone have ideas, what could be bad?

  Thank you!!

  Kathie

  be sure the two Services of OS for earphone & database have been started & running

  no listener.ora file is necessary to start or use Oracle listener just open the command window and issue after an order

  lsnrctl start

• inspect element - how to save the report after change

  Hello
  
  When I create an interactive report and apply "leap control" option it interrupts the report according to the requirements of the standard with a button (+/-sign) on top for show/hide selection... I need to show the report with "Control Break", but don't want to show (option button at the top + /)
  
  When I inspected the element (using internet explorer) and deleted the text and gif file... the report displayed exactly how I wanted it...
  
  My question is how to save this report after making the changes in HTML format (with the help of inspect option element)... I did tried to register under default report, but the report got refreshed and +/-sign came back...
  
  Please advice

  Hello

  When you look at the page source and modify it, it only affects your active HTML document.
  You cannot save those changes to Apex.

  You must use JavaScript and example dynamic action to change HTML each time when the report is rendered or refreshed.

  Kind regards
  Jari

• Windows seem too large for the screen after changing the video card

  original title: display, taskbar and the Internet issues

  I have recently (less than a month ago) updated my video card, and for its great a game however the work he did on my desk is not so great.
  I like having the screen at 1280 x 960, but the taskbar clock is cut by half
  Another issue I have is that the 'X' button is cut in my Firefox window. I usually keep ot holding down the control button and the resizing of pages web pages, videos and games because is too big or too small.

  Any suggestions how to solve these problems?

  Hello

  1 did you receive an error message?

  2. don't you make changes to your computer?

  I suggest you to follow the links and check out them.

  Try chaning the screen resolution

  Change your screen resolution

  http://Windows.Microsoft.com/en-us/Windows7/change-your-screen-resolution

  Check the DPI settings

  Make the text on the screen larger or smaller

  http://Windows.Microsoft.com/en-us/Windows7/make-the-text-on-your-screen-larger-or-smaller

  Expand your computer screen: 6 ways to make it easier to see

  http://www.Microsoft.com/athome/Setup/magnify.aspx

• Problem with the drivers after changing Vista-> WinXP on R61i

  At first I want to mention that I am new to this forum and my native language is not English (sorry for the mistakes of language).

  Computing: Lenovo R61i 8943 g

  Foreplay:

  In the new computer Windows Vista has been installed, but I decided to switch to a Windows XP Professional.There had a few issues with the SATA controller (computer has no floppy drive). After all, I managed to install a new system.

  Description of the problem:

  I can't install the drivers to the computer (internet does not - same wired: ethernet, there is no sound, etc.) In Control Panel-> system-> device-> devices Manager there are yellow questions marks (with small exclamation points) around: network controller, PCI Device, unknown device (what is?), video controller, and video controller (VGA compatible).

  There is no CD that came with this computer, so I tried to find the necessary drivers on the internet.

  On the page

  Lenovo, drivers and downloads support

  I chose [network] to refine the results (first I want to activate ethernet Internet connections) and clicked on

  Broadcom NetLink Gigabit Ethernet software for Windows XP - ThinkPad R500, R61, R61e, R61i

  There is a file 7yra02ww.exe. At the last moment of the installation, the following window appears:

  Broadcom NetLink Gigabit Ethernet Software for Windows has encountered a problem and needs to close. We are sorry for the inconvenience.

  I don't know if I tried to install the appropriate driver. After I tried to install Access Connections (think Vantage Technologies) of

  ThinkVantage Access Connections for Windows XP, 2000-computers portable, but it also fails.

  Could someone help me what to do (what drivers to install and how)? Thank you in advance. Matthew.

  Thank you, Tim_Lenovo. My second post was about a possibility of making the easy instalation, but no one answered. Thanks - next time I'll use the system update

  I don't know what you got almost everything square away exactly means (I'm not so good in English), but I think it speaks of my redundant work.

  And the solution of my problem is very easy! I installed what it takes and just use the control panel-> power-> advanced options. (I think that my mind needs a rest!). In device manager there is a yellow question mark on unknown device (without power management there are two unknown devices without driver), so I thought that I need an additional driver. That's why I was always looking for appropriate software. A solution was so close to me

  I hope that the system update helps a lack of driver for a device unknown (I wonder what it is).

• Could not launch the game after changing settings

  Hi what happened was that I was in my call of duty black ops computer game 2 when I changed a setting for graphics in this game when I hit apply the settings he began the program and now it won't let me back in the game to reset the settings. What can I do? Help, please

  Hi Dennis,

  1. you remember what is the change you have made?

  2. what happens when you try to run the game?

  3. do you receive any error messages?

  Looks like you might have changed the resolution of the game. I suggest you to check if there is no specific file to change the resolution or the graphics settings. You can open the game folder and check.

  If the problem persists, perform the restore of the system to an earlier point when the game worked.

  http://Windows.Microsoft.com/en-us/Windows7/what-is-system-restore
  System Restore can return your files system to a point in time before you noticed a problem, without affecting documents, photos, or other personal files. If the system restore does not resolve the problem, you can undo the restore operation and choose a different restore point.
  
  More information on:
  
  System Restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions
   
  Hope this information helps. Response with status so that we can help you.

• Cannot open the form after change the form in the folder

  After adding file in the form function, when I open the form in the system, he holds the and cannot be opened. What can be the problem?

  Thank you for your supply. I got the answer. At least one of the items in the folder must have the value of the navigator to yes.

  Sampson

• How to refresh the table after changing model

  12.1.3 JDEV

  My Table of the ADF is limited to a list of dataRows in my SampleDataModel class.

  My button is limited to a method of createDataRow of SampleDataModel class.

  Then click the button, a new item is added to the list of dataRows.

  There is a partial trigger button on the table.

  I expect after the button clicked, the table is updated with the newly added row.

  But what I see is: new dataRow is added to the list of dataRows and the flashes of the table, but it does not show the line.

  Anything I missed? Thank you.

  < af:toolbar id = 't3' >

  < af:button actionListener = "#{bindings.createDataRow.execute}" = "createDataRow" text "

  Disabled = "#{!}" Bindings.createDataRow.Enabled}"id ="b7"partialSubmit ="true"/ >

  < / af:toolbar >

  < af:table value = "#{bindings.dataRows.collectionModel}" var = 'row' "

  Rows = "#{Bindings.DataRows.rangeSize} '"

  emptyText = "#{bindings.dataRows.viewable?" "{'No data to display.': 'Access Denied.'}".

  rowBandingInterval = '0 '.

  selectedRowKeys = "#{bindings.dataRows.collectionModel.selectedRow} '"

  selectionListener = "#{bindings.dataRows.collectionModel.makeCurrent} '"

  rowSelection = 'unique' fetchSize = "#{bindings.dataRows.rangeSize}" id = "t1" "

  "partialTriggers =": b7 "editingMode ="clickToEdit">

  How you have implemented the createDataRow method to add the line?

  A table using an iterator in the pagedef, you have updated this iterator?

  Timo