My cd/dvd drive has disappeared. All trying to solve the problems of the code 19 appears. How can I get the cd/dvd drive F?
my cd/dvd drive has stopped working. He said after a repair code 19. How to restore the drive?
Hello
19 code means there is a driver conflict such as two devices attempt to use the same resources.
Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.
Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.
Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr Fixit
Try this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtml
Your CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116
The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
for Windows Vista
http://support.Microsoft.com/kb/929461
When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052
Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problems
CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
Vista installation after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/
Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problems
Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.
Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.
===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.
Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.
Check with your Maker system and a device for the two possible firmware updates and
the correct registry entries for your car.
Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.
Forums - a lot of expert real help
http://Club.myce.com/
CD/DVD units
http://www.myce.com/storage/
Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.
DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.html
I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
Tags: Windows
Similar Questions
-
I used the default reset, as he said he would fix most of the problems. My only problem was that my shortcut icon images have all been replaced with pictures of Firefox by default, suddenly, without known reason.
Now, I have an even Bigger Problem. I NEED My Computer to run Easily, as I am Just a Novice, But Use It for work.
I've been unemployed more of one year, until recently, and I can't afford to hire a professional for re - program again at this time, I did last year.
I wanted Intenet Explorer as my homepage / default browser and he suggested that I use Firefox and then connected to use i / E as my home page.
With Mozilla Thunderbird, I was bound to G-Mail.
I see a shortcut icon, saying he has my old settings in the TI, but I have No idea how to re - apply the.
I pray that someone can help me, please!
I'm in big trouble, if I can't get my computer to it's simple one click to settings launch once again and may lose my ability to do my job at home, and my new job Thuis.
I request here please.
Please help me.Thank you, and blessings to all of you who can help you.
Hello BDBell, see the following link how copying files between profile folders
because now firefox create a new profile (with the reset option).If you cannot easily choose which files to copy, copy all the files to get your firefox like before you do your work, and then if you have any other problems, we are here to hear it and try to solve it.
Thank you
-
My computer is an Acer touch screen with windows 7
There is a problem which was announced two days ago. Many users report 'lack of contacts.'.I suggest that report you it on the status page. If enough users that they degrade the questionSee the status for an eta on the fix page.You may be able to view your contacts in the mobile view. To access that...1. login to your account
2. follow this link http://profile.live.com/contacts?bfv=um.
3. click on the word "PC site" in the bottom of the pageIf you want to return to the mobile just sign on m.mail.live.com
If the above does not workTry another browser, optimize your browserand try Disabling flash plug. He worked for some usersTry refreshing the screen using F5 (or its equivalent) -
All of a sudden my shrunken screen size... How can I get the display back to what it was
Hello
Please try this first:
Hold down the CTRL key, and then press on + (plus) sign several times.
I hope this helps.
-
Windows Mail wants to open all attachments with Word rather than Word, Adobe, pad etc. How can I get the attachments to open properly?
Hello
- Click the "Start" menu in the bottom left of Windows. Then select "Default programs".
- Click on the option "Associate any type of file or Protocol with a program."
- Select the file type you want to change the types of files listed. For example, if you want the text (.txt) file to open it in Microsoft Word instead of WordPad, choose '.txt '.
- Click on the "Change Program" button in the upper right window.
- In the list of programs, select "Microsoft Word". If Microsoft Word does not appear in the list, click on the button 'Browse' in the bottom right and choose Microsoft Word on your computer.
- Click on the button 'OK' and then 'close '. The next time you open this type of file, it will open it in Microsoft Word. Repeat this procedure for any other type of file you want to open in Word.
Also check out this link:
http://Windows.Microsoft.com/en-us/Windows-Vista/change-which-programs-Windows-uses-by-defaultIt will be useful.
-
MSN HAS TAKEN OVER MY HOME PAGE. I DIDN'T ASK THEM! HOW CAN I GET RID OF THEM?
for some reason when I start and select the fire fox web browser, load with msn under the web address and homepage. I don't want this page. in fact, I want is empty for now, as it has been.
of course, I did something to make them think I want them! I don't!
How can I get rid of the page and return empty?
Fire Fox at the top left of the screen button is not the button "tool" as indicated in the info started getting. being the newbie on the block, I think I'm missing something obvious.
Thank you, j.r..
Go to options/preferences of Firefox. On the general tab, you can specify what to do when Firefox starts, including show a blank page.
-
combination unwanted contacts
I sent an email from my husbands computer after signing with my info. Direct mail has now combined its contacts with mine and also its calendar. How can I get these deleted without having to individually?The contacts and calendar are associated with the Live ID used to sign in with. When you view your Inbox, press Ctrl-Shift-O for Options. On the connection tab, click on stop signing in. Now, check the contacts and calendar.
Noel
-
I don't really know what the good topic for this problem. I get the message that Generic Host Process for Win 32 has encountered a problem and needs to close. I need to get rid of it because it freezes everything up. No matter if I send or not send the message to Microsoft.
Hi ArdythPhillips,
· Exactly when you receive this error message?
· You did it of any material changes or software on the computer before this problem?
This problem may occur if you use an old HP printer driver or an old HP scanner driver.
If you are using an HP printer, you can follow this link.
Generic host process error message and a flashlight icon appear
To improve the performance of the computer, you can follow this link & check if it helps.
Restore the performance of your computer with Windows XP
Hope the helps of information.
Please post back and we do know.
-
I have icons on the taskbar notification area, but the arrow disappeared.
Check if "Hide inactive icons" is enabled:
Right-click on your taskbar, click on "Properties" on the "taskbar and Start Menu Properties" under "Icons", you can click to check the box in front of "Hide inactive icons" to display the arrow. "
-
The State is broken and has tried every day since 10/15. Error code is 646.
Hi thomas talbot,.
Welcome to the Microsoft Windows answers Forum community!
Please refer to: http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/4a971145-86ca-4b80-a545-93a36536d690
I hope that helps!
Thank you, and in what concerns:
Aziz Nadeem - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think. -
Impossible to uninstall my 6510 all trying to solve the problem of scanning
could not scan from the printer (although was able to scan from PC using windows 8 app). noticed on printer & Scan Doctor two 6510 identified printers. decided to uninstall and reinstall, especially when I found that the last soiftware has addressed problems scanning but doesn't find that HP and windows wouldn't uninstall stuck with the error 2081883401.
tried to follow another thread which describes the search for the temp files 7Z, but none of the four included a util subfolder
Simply ignored the error message, follow the instructions to restart and reinstalled the latest version of the software from the Web site.
the scan now successful from both ends, PC and printer. No drama! Took me by surprise that the scan was already in my library!
-
All my icons are direct me directly on my itunes. How can I get it back to normal?
Tried to put music on a blackberry phone. Chose default itunes somehow and it changed all my icons to itunes. Everything I click on sent me directly to itunes.
You can find a registry script that will give to the file association of the. Extension of LNK file on this page. Doug Knox prepared a set of these problems known in Windows XP file association and they work well with Windows 7.
Download the labeled file (shortcut) LNK file Association problem (restores default shortcut behavior) then unzip and run the. Script by double-clicking REG on and accepting the UAC confirmation.
-
I need to retrieve my name of registered user and passwords that are automatically accessible but now are not displayed
Where they recorded in Firefox or another program?
-
I've been hacked. I'm finally home, but emails are missing. MOST REALLY IMPORTANT! I also no longer have access to the mobile phone, which was on the account. Help, please
original title: I was hacked.What email did you use? If it is OE then see www.oehelp.com/OETips.aspx#4. If it's Hotmail, then ask here www.windowslivehelp.com
Steve
-
How can I get my CD & DVD return players to be reconised by windows (code 10)
MY CD/DVD player will not work. Device Manager displays the available readers but with a yellow dot or (!). Then it tells me cannot start code 10. How can I get them back online.
Hello
Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
http://support.Microsoft.com/kb/943104/Follow these steps to remove corruption and missing/damaged file system repair or replacement.
Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN
sfc/scannow
How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.htmlThen run checkdisk (chkdsk).
How to run check disk in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html==========================================================
After the foregoing:
References to Vista also apply to Windows 7.
Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitTry this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtmlYour CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116The DVD player does not work after installing Windows 7
http://support.Microsoft.com/kb/975270/The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
Setup after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.Check with your Maker system and a device for the two possible firmware updates and the
correct registry entries for your car.Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry settings for your
CD/DVD drive someone with the same model.Forums - a lot of expert real help
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.DevManView - free - an alternative to the standard Windows Device Manager, which displays
all devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.htmlI hope this helps.
Maybe you are looking for
-
Hello I have a huge problem. My cd-rom doesn't work anymore. In the Panel, I see the yellow sign for the CD... Unfortunately, there is no driver to download and how can I do an update of the Bios of the laptop, when the CD-rom does not work. Can anyo
-
I replaced the low ink cartridges using HP products, but the printer is still saying ink is low and will not print... any ideas anyone please? Irritating v. Thank you Katie
-
Disk Manager does not register E:
Normally when I insert the disk my camera SD to get a little menu asking what I want to do with these files. Today, I don't get that. Last time it worked propoerly was two days ago. It is not a new drive, even if it has been reformatted after the l
-
Frustrating because the Flash worked until recently. I don't want to pay to upgrade to solve the problem.
-
I need no password protection. Windows 7 Pro does not allow me to cancel the need to use a. Who can be replaced?