Determine the throughput and bandwidth?

Similar Questions

• determine the Center and the radius of the circles

  I want to determine the Center and the radius of the circles in the attached photo.

  I tried to use "IMAQ Fit circle 2", but I didn't know how to use the vi.

  Is there anyone can give me an example how to use "IMAQ Fit circle 2" for the image as an attachment?

  Or tell me any other method to determine the Center and the RADIUS.

  This example not found?

  

• Determine the OCD and skin of pixels of the published file - how to?

  Hello

  I develop a few movies in Captivate that I want to play (load and unload as swf) in Flash. I know the size of the stage of Captivate, but how to determine the amount of pixels to add to the Flash file to cover the skin and the Table of contents (TOC)?

  I see a framework I put it in the skin that allows me to put the pixels at the bottom of the skin - 31 pixels. As well is the top automatically 31? And I cannot find anywhere how I set or just say what will be the table of contents.

  I hope someone can help here. Checked several assignments and do not see this issue.

  Thank you.

  Hello

  It's definitely somewhere in these forums. In the current version of the CP (you use CP4, since you're talking about the table of contents) you cannot change the width of the table of contents: there always 250pixels for the width. If you use the separate option for the table of contents, these 250px will be added to the width of your movie captured, if you use the Overlay option, it does not change the width.

  In CP4, if you use the horizontal play bar (I prefer navigating through the table of contents), it will add about 30 px at the height of your movie, given that the play bar is always outside the movie (unlike previous versions). THAs is what you're talking about, I think you see this in the options for borders. For the default playback bar it is indeed 31px. The top, left and right borders do not exist in the default settings. If you add them, you can also choose the width of these other borders. The lower border is only thick because of the presence of PlayBar in this border. I think, if you add other borders, you not like the look of these thick borders and reduce them to maybe 2 to 5 pixels, so much less pixels will be added.

  I hope that clarifies something?

  Lilybiri

• How do you determine the type and speed of your RAM installed what?

  * Original title: laptop RAM

  How to determine what type and speed of your RAM installed is.

  Gift little Handy dandy named Speccy.

  http://www.Piriform.com/Speccy

  Once completed its display, click on memory

• Determine the entry and exit of Gamut values for RGB profiles

  Hi all

  I'm looking how to check if a swatch value is within my range of .icc profile.

  If I have a color value e.g. L = 74 = 12 b = - 37 and I want to see if it is in my .icc profile I select Edition > convert to profile and choose my profile

  I can then select the shade and see if there wasn't a warning range.

  With the color chart above if my color profile is 'Photoshop 5 CMYK default' I get the warning, if I change the profile of "US Newsprint SNAP (2007)"I don't get it. "

  

  

  

  This works very well for the CMYK profile.

  My question is how to check if the color is located inside a RGB profile?

  I tried to change the intent of the paper Web and Digital Publishing and changing the RGB but only the CMYK profile profile affect the output of the warning range.

  We know of a solution to this? The same question would seem to be in photoshop.

  Thanks in advance.

  Trevor

  Hi Rob

  Thanks for your reply.  I need a solution that I can reproduce by script.

  I have been in contact with Phil Green of the ICC and he said that if I convert my color Lab to RGB and vice versa if a difference between the original and the new laboratory values, then the color is outside the gamut of the RGB profile.

  I have tried this before his suggestion and wasn't getting anything out of the values of the range.  I made the conversions using the user interface.

  After his suggestion that I did the conversion by changing shades space using scripts and, to my surprise showed differences.

  This provides the solution I was looking for.

  Concerning

  Trevor

• Help determine the links and other

  Hello-

  I'm new to Muse and have a few questions that I hope someone can help me.

  1. is there a way to know what will be the URL on a page? I need to print flyers with a link to them and do not know how to determine what exactly it will be because it is not direct. What should I do to go the first direct? I really need get the flyers ordered before finalizing the site for printing. I have a registration with a registration page and I provide this link so people know how to register.

  2. the registration form actually work if I don't have Adobe Muse and no other programs? I read online that someone says he had to have Business Catalyst, but I don't see why. I receive emails with records without something more?

  Thanks in advance if anyone can help me.

  (1) you should buy a domain name for your future website. There is no other variants.

  (2) in the Muse is not possible to do. The only way - if you place your site in Business Catalyst. But in this case, you need to be a php programmer and spend a lot of time coding at the server level. Much better to use ready solutions to employment, such as WordPress, Joomla and other CMS

• Determine the type and version of the remote client

  Hello

  We have a mixture of zero clients and downloaded Windows in our remote user base. Try to determine which are eaten and which (type of client, MAC, firmware, version build etc.) by having users is like herding cats.

  Is there a way to say to display log files or console which client is used to access view? We are on View 4.6.

  Thank you

  See if this is useful, VMware KB: information to view Office collection

• Determine the maximum value and the minimum value for each value in the 2D array

  Hello, I need help please. Sorry my English is not very good. I have table 2D in which each value describes a waveform, I needed a time interval to determine the minimum and maximum value of each element of the array.

  
  

• Determine the size of the container when using SizeUnit.PERCENT

  Hello

  How can I determine the width and height of a container, when I use the percentage of the size of the container?

  I have the following code, but this.width and this.height are both 0, causing the background sprite is not to demonstrate:

     public class HeaderContainer extends Container
      {
          private var _imgCategory:Image = new Image();
          private var _lblTitle:Label = new Label();
          private var _matrix:Matrix = new Matrix();
          private var _sprBackgroundColor:Sprite = new Sprite();
          private var _tfmtTitle:TextFormat = new TextFormat();
  
          public function HeaderContainer()
          {
              margins = Vector.([5,5,5,5]);
              debugColor = 0xCCCCCC; // grey
              flow = ContainerFlow.HORIZONTAL;
              align = ContainerAlign.NEAR;
              size = MyConstants.HEADER_SIZE;
              sizeUnit = SizeUnit.PERCENT;
              initializeUI();
          }
  
          public function initializeUI() : void
          {
              with (_sprBackgroundColor)
              {
                  x = y = 0;
                  graphics.beginFill(0x0000FF, 1);
                  graphics.drawRect(0, 0, this.width, this.height);
                  graphics.endFill();
              }
              ...
          }
  

  Have you tried to call the initializeUI method after the container has been added to the scene? You can easily register a handler to do this.

• determine the storage space for the upgrade of the APEX

  I put on my 11.2.0.3.12 level APEX APEX to APEX 4.2.4.00.08 version 3.2.1.00.12 version database.  I understand that I must perform the full upgrade, I am moving from version 3.2.x to 4.2.x.

  According to the APEX 4.2 Installation Guide for the full development environment, I have to spend in the following arguments:

  @apexins.sql tablespace_apex tablespace_files tablespace_temp images

  Where:

  • tablespace_apexis the name of the storage space for the user of the Oracle Application Express application.
  • tablespace_filesis the name of the storage space for the user to Oracle Application Express files.
  • tablespace_tempis the name of the temporary tablespace and tablespace group.
  • imagesis the virtual directory for the images of Oracle Application Express. To support future upgrades Oracle Application Express, set the directory of the virtual image that /i/ .

  
  

  How can I determine which user is the " " " User of the oracle Application Express application" and which the user is the user Oracle Application Express 'files' (if I can then watch their default storage spaces)?

  
  

  
  

  Hi Mimi Miami,

  Mimi Miami wrote:

  I put on my 11.2.0.3.12 level APEX APEX to APEX 4.2.4.00.08 version 3.2.1.00.12 version database.  I understand that I must perform the full upgrade, I am moving from version 3.2.x to 4.2.x.

  According to the APEX 4.2 Installation Guide for the full development environment, I have to spend in the following arguments:

  @apexins.sql tablespace_apex tablespace_files tablespace_temp images

  Where:

  • tablespace_apexis the name of the storage space for the user of the Oracle Application Express application.
  • tablespace_filesis the name of the storage space for the user to Oracle Application Express files.
  • tablespace_tempis the name of the temporary tablespace and tablespace group.
  • imagesis the virtual directory for the images of Oracle Application Express. To support future upgrades Oracle Application Express, set the directory of the virtual image that /i/ .

  How can I determine which user is the user Oracle Application Express 'application' and that the user is the user Oracle Application Express 'files' (so I can then look at their default storage spaces)?

  APEX 3.2.x installation that follows is users:

  • Oracle Application Express Application user: APEX_030200
  • Oracle Application Express user files: FLOW_FILES

  So to determine the tablespace_apex and the tablespace_files you must connect with the user sys with sysdba privilege and run the following query:

  SELECT USERNAME
       , DEFAULT_TABLESPACE
    FROM DBA_USERS
   WHERE USERNAME IN ('FLOWS_FILES','APEX_030200')
  

  Then use the APEX_030200 user as tablespace_apex tablespace and a tablespace of the FLOW_FILES user as tablespace_files.

  I hope this helps!

  Kind regards

  Kiran

• What hearing method uses to determine the overal frequency?

  Hello

  No one knows which method uses Audition to determine the "global frequency" in the section "analysis of frequency? I need to know how is it calculated?

  Thank you very much!

  stephaniec9433324 wrote:

  Thank you for this! So am I right in thinking "global frequency" is that point which contains the largest amount of energy in a sound sample given frequency?

  I don't know why it's called "global" frequency - seems a little strange to me, although you could call it although it is a bit of a mouthful, I'm not sure. But, strictly speaking, what is the frequency of the amplitude higher at this moment on the screen. It isn't really a sign you measure; It's a single FFT 'slice', which raises even more questions, as the sector size determines the resolution and therefore the accuracy of the result in any case.

• shell script to determine the width of the file, size, resolution cs5 js

  I use a Script of Michael L Hale (core.quickMetadata "that uses" xmp.getProperty "and the bridge") to determine the size and the resolution of files without having to open or place.

  Unfortunately, it fails with some files (non-Photoshop generated bitmaps, seems).

  (PDF, I treat differently altogether to avoid the problem determination pages pdf counties and potential problems with PDFs containing different size pages.)

  "None of you do not know if and how you can reach resolution with" app.system "in CS5, the height, the width of the files?

  I may have come across before, but is unable to locate such a thread currently.

  Thanks for any input.

  The following 2 options that you can use if you want to clear all information in text file then analyze js. You could see if one of these contain the data that you are after?

  #target bridge
  
  var foo = File('~/Desktop/SomeFile.tif');
  
  getAllXMLSIPS(foo);
  
  //getMetaDataMDLS(foo)
  
  function getAllXMLSIPS(f) {
       if (f instanceof File && f.exists) {
            var shellString = "sips --getProperty allxml ";
            shellString += f.fsName;
            shellString += ' > ~/Documents/StdOut.txt';
            app.system(shellString);
       }
  }
  
  function getMetaDataMDLS(f) {
       if (f instanceof File && f.exists) {
            var shellString = "/usr/bin/mdls ";
            shellString += f.fsName;
            shellString += ' > ~/Documents/StdOut.txt';
            app.system(shellString);
       }
  }
  

• Find the Max and Min for a table of number...

  My table has 5 numbers in it and also the ability to add more to what the user sees fit. I want to be able to view the maximum and minimum of the table number. I made a loop, but I do not know how do select the highest or lowest number automatically without me selecting manually typing in the middle.

  This is my code to determine this:

  Determine the Min and Max brand
  function maxandminMark() {}
  var markIndex:int;
  markIndex = (marks.indexOf (marks));
  If (markIndex! = - 1).
  {
  for (var i = markIndex; i < marks.length; i ++)
  {
  brands [i] = marks [i + 1];
  }
  trace (maxandminMark);
  }
  }
  }

  Here are two ways...

  1) walk through the comparison table of values

  var numArray:Array = new Array (38,11,45,7,14,9,67,28);
  var minNum:Number;
  var maxNum:Number;
   
  If (numArray.length > 0) {}
  minNum = maxNum = numArray [0];
  }
   
  for (var i: uint = 1; i< numarray.length;="">
  If (numArray [i]<>
  minNum = numArray [i];
  } ElseIf (numArray [i] > maxNum) {}
  maxNum = numArray [i];
  }
  }
   
  trace (minNum, maxNum);

  (2) sort the array numerically and pull out the first and last items

  numArray.sort (Array.NUMERIC);

  trace(numArray[0],numArray[numArray.Length-1]);

• Determine the width of the loaded clip

  Hi all
  Is there a way I can get and set the width and height of a loaded clip? I created a movie then loaded and empty empty a small swf file in the film with loadClip. I now want to determine the width and height of the loaded clip and it adapts to the size of my movie dimensions. Is this possible? Although the film load fine and I can position its x and y coordinates, the width and height show as zero.
  
  Can someone help me with this one? I use Flash Professional 8.
  
  Thank you
  Brayne

  You must wait until loading is completed to access the loaded SWF _width and _height. and then you'll see the _width and _height of objects on stage in the first image if you access these properties as soon as the SWF is initialized.

• After the update the new version cannot determine file downloads. In the eyes to determine the file, but download files go in C / documents and settings even

  After the update the new version cannot determine file downloads. In the eyes to determine the file, but download files go in C / documents and settings even if I chose another folder

  Hello, there is a general regression in firefox 27 allowing any files to upload directly to a root drive. Please try to create a subfolder (like D:\Downloads) and set as the default location for downloads...

  See also bug #958899.