Determine the type and version of the remote client

Similar Questions

• static ip address to the remote client asa 5500

  Hi all

  I am trying to configure static ip on the remote client side of the user, I use the following as an example doc, but I don't get the ip address which I am mentiong the user.

  http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a0080a7afb2.shtml

  my version of the asa is 8.2 (1)

  Thank you

  Cyril

  Great to hear. Pls kindly marks the message as answered while others may learn from your post. Thank you...

• Is there a method to determine the Anyconnect client types and quantities that connect to the ASA sslvpn?

  We need to determine the distribution of different Anyconnect sslvpn, connecting clients to our ASA hub. Is there a method, either in the ASDM or CLI (or syslog) to determine the type of customer and the meter (for example the Android and iOS vs Windows vs Linux)?

  There are 'user agent' field in vpn-sessiondb. You can check via ASDM or

   show vpn-sessiondb det anyconnect

  If my memory is good. (Exact symptom depends on version)

  http://www.Cisco.com/c/en/us/TD/docs/security/ASA/ASA-command-reference/...

• Binds two ISP ASA to remote VPN Client to connect to instead of creating two profiles on the remote client

  Hello

  just a quick,

  TOPOLOGY

  ASA isps1 - 197.1.1.1 - outside

  ASA ISP2 - 196.1.1.1 - backup

  LAN IP - 192.168.202.100 - inside

  I have configured Tunnel on the interfaces (external and backup), but is to link both legs public to serve a thare as redundancy for vpn users and users of the vpn tunnel leave pointing inside IP whenever they want to establish vpn sssion, we want it to be one, so if an interface fails vpn users will not know , but he will try the second for the connection. instead of creating the profile for the two outside of the leg on the vpn client.

  is this possible?

  Hi Rammany.

  In your case, you have only an ASA that connects with 2 ISP in another segment IP... 196.x.x.x (Link1) & 197.x.x.x (Link2). What your condition is you want to have the VPN client who must be consulted with backup. If 196.x.x.x link fails, it should automatically take 197.x.x.x link. That too we should not have the config set in the VPN client backup server. You don have the possibility of having standby active also in asa single.

  I think n so it will work with your current design.

  This option is if your VPN client supports host name resolution (DNS). You can have the VPN created for both the public IP address share the same host name keeping the bond as the primary address 1 and 2 a secondary address. It will work alone.

  Hope someother experts in our forum can help you with that.

• How do you determine the type and speed of your RAM installed what?

  * Original title: laptop RAM

  How to determine what type and speed of your RAM installed is.

  Gift little Handy dandy named Speccy.

  http://www.Piriform.com/Speccy

  Once completed its display, click on memory

• Rejecting the VPN clients by version

  Is it possible that I can refuse access customers by their version which they run? Can someone send me a link on how I could do this?

  Thank you

  Dwane

  Dwane,

  How are you? I think that's what you're looking for:

  ~~~~~~~~~~~~~~~~

  ustomers Type & Version limiting build rules to allow or deny VPN Clients according to their type and software version. Build these rules exactly, using the formats, abbreviations and other specifications of rule below.

  Build rules in the format p [ermit] /d [eny]:, for example, d VPN 3002: 3.6*.

  The * character is a wildcard character. You can use it several times to each rule. For example:

  refuse *: 3.6* = deny all clients running software version 3.6 x.

  Use a separate line for each rule.

  Rules of order of priority. The first rule that matches is the rule that applies. If a rule later contradicted, the system ignores. If you set all the rules, all connections are allowed.

  When a customer matches any of the rules, the connection is refused. This means that if you set a deny rule, you must also set at least an allow rule, or all connections are refused.

  For software and hardware customers, customer type and software version must match their appearance (non-case sensitive) in the monitoring | Screen sessions, including spaces. We recommend that you copy and paste from this screen to it.

  "N/a" for the type or version to identify the client sends no information. For example: n permit / a:n / a = allow any client who does not send the client, type, and version.

  You can use a total of 255 characters for the rules. The line break between rules using two characters. To keep the characters, use p for permits and d to deny. Eliminate the spaces except as required for the type of client and the version. You don't need a space before or after the colon (:)).

  Configuration mode checkbox to use Configuration Mode with clients IPSec (also known as the method of setting up ISAKMP or Transaction of Configuration). This option Exchange with the client configuration settings while negotiating SAs. If you check this box, the settings of Configuration of Mode; otherwise, ignore them. The box is checked by default.

  To use the split tunneling, you must check this box.

  If you checked L2TP over IPSec as the Tunneling protocols, do not check this box.

  ~~~~~~~~~~~~~~~~~

  Please see the link below, you will need to have 4.7 running on your CVPN:

  http://www.Cisco.com/en/us/products/HW/vpndevc/ps2284/products_configuration_guide_chapter09186a00803ee1f0.html

  My two cents,

  Frank

• ICMP failed on inside the remote host by vpn

  A strange problem is then seen that he was working on an ipsec vpn on asa.

  ASA inside: 192.168.100.1 255.255.255.240

  host of the customer directly connected to ASA inside: 192.168.100.2

  tunnel to form properly. When the remote client 10.20.15.5 is crazy to asa, he answers.

  the same ping when tried customer 192.168.100.2 directly connected to the asa on the inside does not work.

  & This also does not bring the tunnel upward.

  of asa ping 192.168.100.1 & vice versa is very good.

  plotter configuration & race packet is attached. Ping between host traffic capture and asa inside the interface only displays not any what exit.

  Help, please.

  Thank you.

  That doesn't sound right.

  If it goes through the VPN tunnel, the traffic will be encrypted, and you shouldn't be able to see the break of your internet service provider.

  Can you please delete the xlate and connections to this host: disable 192.168.100.2 local

• Lookout 5.1 Remote Client does not not with Lookout Client 6.1

  I hope you guys can help me make a remote client of Lookout 5.1 runs in 6.1.

  On my computer, I installed Lookout Client 5.1 and he ran a remote client (we'll call it "MyRemoteClient.lp4").

  We have recently upgraded to Lookout Client 6.1 and when we run 'MyRemoteClient.lp4', he says that it was created by an older version of Lookout and recomiple the file source 'MyRemoteClient.lks '.

  What source he speaks?  The only source I have is for the server process. We can uncompile the "MyRemoteClient.lp4" and recompile since I donot have 'MyRemoteClient.lks'? ".

  Thank you

  Max

  The .lks file is the source file, but the .l4p is the file have respected is not compatible version. You must open the file .lks of the 6.x process if the process is created in 5.1.

  You have the development lookout 5.1 Server? You can open the .l4p file and save it. The .lks file is generated.

• updates - updates has not pushed to remote clients (Windows Server 2003)

  original title: critical updates

  Hello

  I have an Windows Server 2003 with Windows XP Pro SP3 clients/members area and allows you to push critical updates for WSUS clients.

  However, updates are not pushed to the remote clients even with the connected VPN tunnel.  The only time updates are pushed to these remote clients is when they visit the office and connect to our LAN.

  Is there a way for remote clients to get their updates without having to remove them as a member of my domain?

  Thank you...

  Forum specific support by WSUS:
  http://social.technet.Microsoft.com/forums/en-us/winserverwsus/threads

• allow traffic through remote client

  Hi friends,

  I'll explain my setup.

  I have an asa in datacenter with the static ip address, then site Office also having static ip, these two sites are connected via VPN and I configured the remote client to the data center.

  workers of remote client needs to access the network of site office. It's my setup.

  the problem I faced is that remote workers they cannot access the site office network.but if I try to ping the ip vpn site office pool and then if I try

  the remote client, I can able to access the siteoffice of the remote client.

  Please provide me with the solutions experts

  I understand that you have the following topology:

  (1) Lan-to-Lan VPN between data center and site office

  (2) VPN Client that connects to the data center and here also join the site Office.

  There are a few things that need to be configured for the VPN Client to access the site office:

  On the ASA Data Center:

  -command "permit same-security-traffic intra-interface"

  -Tunnel of Split ACL must include the site LAN Office

  -Crypto ACL for LAN-to-LAN VPN must include the following:

  permit ip access list

  On the ASA site Office:

  -Crypto ACL for LAN-to-LAN VPN must include the following:

  permit ip access list

  -NAT exemption must include:

  permit ip access list

  Hope that helps.

• After the update the new version cannot determine file downloads. In the eyes to determine the file, but download files go in C / documents and settings even

  After the update the new version cannot determine file downloads. In the eyes to determine the file, but download files go in C / documents and settings even if I chose another folder

  Hello, there is a general regression in firefox 27 allowing any files to upload directly to a root drive. Please try to create a subfolder (like D:\Downloads) and set as the default location for downloads...

  See also bug #958899.

• Determine the version number and compilation of VMwareTools for VMware Workstation 7.0.1 build 227600

  I installed VMware Workstation 7.0.1 build 227600 on a Windows 7 64-bit machine.  Update the VMware Tools using the compiler, one of the instructions is:

  CP /mnt/cdrom/VMwareTools-x.x.x-xxxx.tar.gz /tmp/

  How can I determine the values of x in this case? When I tried the following command:

  CP /mnt/cdrom/VMwareTools-7.0.1-227600.tar.gz /tmp/

  I received the following error message:

  CP: cannot start ' / mnt/cdrom/VMwareTools-7.0.1-227600.tar.gz':

  No such file or directory

  The GuestOS I tried to run is:

  Release of centOS 5.2 (Final)

  I always use AutoComplete with tab to get the name of the file.

  Type:

  CP/mnt/cdrom/VM, and then press your tab key. He must complete the rest automatically.

  Then complete the order with the part of tmp folder location.

  Rick Blythe

  Social media specialist

  VMware Inc.

  http://Twitter.com/vmwarecares

  http://Twitter.com/vmwarekb

• All webcam width/height and determine the connection type

  Hi, two quick questions:

  1. is there a way in ActionScript to determine what type of connection is used (e.g., P2P or FMS)?

  2. is there a way to set the width/height of the image of the webcam? I currently have to extend the WebcamPublisher class to access the instance of _camera and use the Camera.setMode () method, but it seems that that has no effect whatsoever.

  Thanks in advance,

  Michiel

  PS: I am aware of the captureWidthHeightFactor method, but I really do not like this approach, as it is not clear what dimensions are used for the video. I would like to determine the dimensions of myself, as when you use the Camera.setMode () method.

  For your share of width and height, you can use APIs of resolutionFactor in webcamPublisher as captureWidthHeight that API is deprecated. Height and the default width is multiplied.

  And again, if you want to set your own native height/width, since you already are subclassing WebcamPublisher, subclass just the createMyStream function and add your native width and height. See this function in the source code 9 WebcamPublisher player provided.

  One thing I forgot to mention in the last post, you have P2P with player 10 and you must use the Player 10 SWC for any verification of P2P. Player 9 will always be FMS.

  I hope this helps.

  Thank you

  Hironmay Basu

• determine the Version of ESX (3.5 and 4.0)

  In the old days, we can determine the esx version from a file xml on/etc/vmware/patchdb

  ESXver ='cat /etc/vmware/patchdb/3*.xml | grep "| Cut - c12 - 16'

  But this file is no longer available on vsphere 4.0

  Is there an easy way (a command) or a file I can analyse that will tell my script if the current esx host is 3.0, 3.5, or 4.0?

  something like that?

  [root@ ~]# vmware -v
  VMware ESX 4.0.0 build-208167
  [root@ ~]#
  

  or

  http://KB.VMware.com/kb/1012514

• Determine the DRAC of RACADM version?

  Is there a way to determine the version of DRAC General (e.g. DRAC6, DRAC7) by using the RACADM commands? I'm working on a few scripts that must run differently on DRAC6 vs DRAC7.

  I am currently shooting (from RACADM GETSYSINFO) system model and examining the 2nd digit of the numeric part. (e.g. M610 - 1 indicates DRAC6, R720 - 2 indicates DRAC 7) but I tell myself that there must be a better way to do it.

  Thanks in advance. Post

  Jim,

  Looks like there may be a way, you will need to test it in your environment.

  racadm - u Pei methods g idracinfo o idractype r
   
  Now, each of them brings a different code. That's what we've found so far:
   
  moulder-components of 11g idrac6 reported as 11

  12g monolithic reported as 16

  12g modular reported that 17

   

  http://ftp.dell.com/Manuals/all-products/esuprt_software/esuprt_remote_ent_sys_mgmt/esuprt_rmte_ent_sys_rmte_access_cntrllr/integrated-dell-remote-access-cntrllr-7-v1.50.50_Reference%20Guide4_en-us.pdf page 148

   

  iDRAC Type (read-only)

  Description	Identifies the type of controller to access remotely.
  Allowed values	Product ID
  By default	MCC: 9 For 10G iDRAC: 8 For 11G iDRAC6 on Rack and servers: 10 For 11G iDRAC6 Enterprise on blades: 11 For 12G iDRAC7 on Rack and servers: 16 For 12G iDRAC7 Enterprise on blades: 17

  Let us know if this solution works for you...

  Best regards and enjoy your weekend.