Dev Alpha B - stuck with wifi configuration

Similar Questions

• Windows Vista stuck with "update configuration".

  Whenever I stop Windows Vista, System stucks with "Configuring updates" appearing on the screen.

  The original post has been read.

  The original post has no importance now.

  What you do not understand, is that you now do a logoff and reboot for a fresh start of windows.

  The problem should be gone because the download folder has been emptied.

  and if the problem is still there, start the system in safe mode and then rinse the folder download again.

• BlackBerry Q10 Dev Alpha C - stuck on "essential gestures."

  Hey guys,.

  I accidentally placed an emergency call after loading the last 10.3 OS on my Dev Alpha C through the tutorial from gesturest. He asks me to swipe down from the top where the only option is 'emergency call '. I don't see a way to pass the tutorial of gestures to extinguish the GMS. Can someone help me out here?

  Okay, it looks like I had to do a battery pull and then just keep tapping the button 'try '. Finally he moved me to a screen where I could slip into an application and tutorial actions. Huge PITA, but I hope I am the case of edge here.

  Rion

• How to find the IP address assigned to Dev Alpha for use with blackberry-deploy?

  The Playbook, I use blackberry - deploy to install the .bar file. It requires the IP address assigned to the Playbook, which is available by clicking on an icon in the status bar in development mode.

  However, I don't see such an icon on the alpha of dev. Is it possible to find the IP address assigned to Alpha of Dev that I can use with blackberry-deploy?

  Answered my own question. Its network connects-> advanced-> Internet connection.

• Re: Satellite L300-2This - STUCK with WiFi

  Hello

  Launch XP SP3, mngrs device Yellow Watch, the two martks question / exclamation for

  Other devices/Ethernet Controller
  Other device devices/Modem on high definition Audio Bus
  Another Audio device / devices high definition Audio Bus

  and also for (when hidden devices is on)

  Non Plug Play devices

  Series, no question mark, just a grey box with an exclamation mark.

  History, first downloaded all the drivers available at toshiba for xp, realtek, atheros, intel. installed between them, nothing has worked.
  then in following assistance from the previous thread qualified card WLAN Atheros AR5007EG (168, device 001 seller Details)

  When drivers installed realtek or atheros nothing happens, shortcut key works and shows the dialog box to change the WIFi on it, when I do that nothing happens. \
  During the installation of the driver intel icon does appear in the taskbar with the message no driver installed.

  Read all the relevant thread, the only thing I haven't done is updated the BIOS, but I bought the PC a week ago...

  Wonder if there is no substitution among drivers?, how to remove these drivers and try reinstalling atheros if they do not appear in Add/Remove programs...

  Thank you very much in advance for your help

  ALEKS

  Hello

  > Wonder if there was no substitution among drivers?, how to remove these drivers and try reinstalling atheros if they do not appear in Add/Remove programs...

  The WLan device driver can be reinstalled in the Device Manager.
  I mean you can mark the unknown device (marked with yellow exclamation point) and that you use the update driver option for new installation.

  Then you can use the Advanced installation (second option) to point to the Wlan driver files that you have downloaded and stored on the HARD drive.

  In most cases, this driver installation works.

• BB10 dev alpha - stuck in Configuration - does not load the license agreement (r2320)

  I successfully upgraded Dev Alpha A 10.0.09.2320 with automatic charger.

  Device, rebooted, installed new drivers, etc etc, all the other things worked well, BUT

  The device is unable to complete the installation, because it gets stuck on the license agreement page.

  I am connected to wifi. The wifi works. It's worked before. It won't let me even to select a country, it shows an error that the network does not, repels me a page, and I have to disconnect / reconnect to wifi before it allows me to 'sweep left to continue' again.

  Any suggestions?

  I managed to make it work by (sigh) with the help of roaming data connection (after restart). Now it is stuck on the screen of a software update. He has rightly "Software Update" and nothing else on the screen. The Act of working is the Emergency call.

  Update: after another reboot, after you turn off roaming data once again, it gave me an option to start or turn off the phone, but it says something about "blackberry infrastructure? Does this mean that it will work only with BlackBerry Internet Service in the future?

  Edit: so bad, yet another restart that he lets me actually left-scan-ignore the update of the screen without anything do. Sorry for the false alarm, I'll leave it here for anyone to find.

• HP Jet 7: My hp stream 7 tab stucks in the configuration of the window has... (a picture of blue background with whi

  My hp stream 7 tab stucks in the configuration of the window has... (a picture of a blue background with white letters) its does not accept the entry while I also use an aotg with the mouse cable. So please help me its very urgent

  Try to hold the low volume button when the power and press the F11 key to enter the menu of system recovery.

• After wiping Dev Alpha, it gets stuck

  I recently installed the updated BB10 with the hub. I found that something was wrong with the update that I couldn't connect to BBID little matter what I tried. So, I did a cleanup of security of the device.

  Now when it restarts, it shows a litte with a USB phone to a computer. When I plug it into the USB or the phone or the computer acts as something that happened.

  If I don't touch it, the dev alpha turns off, then when I turn it on again, same thing the usb screen. I need to finish a few apps and test them, I don't know what to do. Can someone help me?

  The automatic charger for Windows and connect the device to the computer windows using a US cable. Run the automatic charger. It starts by itself. If this isn't the case, keep the button of the unit alpha dev for at least 15 seconds.
  The autoloader should now be able to connect to the romantic boot and start updating your device and wipe all content.

• How to configure NAT for Hyper-V on laptop with wifi, wired and vpn connectivity

  Me, as I suspect a lot of people, I have a laptop with WiFi connection, cable connection and VPN connection (Cisco AnyConnect), which

  also uses a virtual adapter (activated when active). I searched for some time a way to be able to move to

  Hyper-V in VirtualBox. Blocker full for me is the need for a lot of my virtual machines to be able to connect to the

  Internet through 'the connection active' in the way that VirtualBox and VMWare Workstation/Player through their NAT feature.

  I'm not a networking wait, but after looking around, can't seem to find something that is simple enough for me to configure,

  with a minimum of resources, which allows me to connect a Hyper-V virtual network via a simple NAT device adapter

  all three potential network connections - most seem to not assume that one connection out of the machine, which of course does not

  me what I want.

  Three questions:

  1. is there a Windows application available that an adapter (like loopback) internal which acts as a real NAT device to one of the surfaces

  external access via the active network connections and through the Windows Firewall and any other antivirus, components etc. for

  the road to (i.e. behaves like a "normal app" inside Windows for internet access)? It would be the best option, because it would be

  "always there" when I run virtual machines

  2. display of my lack of knowledge around this feature, don't RRAS (and I know that this is not an option "minimum contact") allow you to

  Connect an internal network adapter to several external network adapters?

  3. on the Linux/OpenBSD various base/NAT routers, are everything that allow several external adapters and who are

  relatively easy to set up (by an independent expert of the network)?

  Really, we could do with this feature for Hyper-V on the desktop, but willing to work around him, if there is a way to at least the

  use virtual machines, once it is easy to install.

  Hello

  The question is more suited in the TechNet forums. So I would say you mention the link and send the request in this forum for better support.

  http://social.technet.Microsoft.com/forums/en-us/w8itpronetworking/threads

  For any information related to Windows, feel free to get back to us. We will be happy to help you.

• Cannot install iOS 10.0.1 with Apple Configurator 1.7.2

  Hello

  I have 60 iPads in 5 carts (12 per basket) that I need to install some applications on. They are already configured and supervised with Apple Configurator 1.7.2. I've never had problems in the past with AC1, I've always been able to install the updates and applications easily with very few questions, because of that I've never felt the need to update to AC2. However, this time during the update of ios and refreshment, I get the error 'complete with an error - cannot install iOS' 10.0.1 And now 12 of my iPads are stuck in recovery mode.

  I tried before wipe them off and re supervise them, but I always get the cannot install iOS 10.0.1 error, followed by all the iPads stuck in restore mode. I tried to update only 1 or 2 at a time. I tried the update/supervise them with no apps queued for installation. I tried to restore the iPad via iTunes, which works, but when I try to put it back on AC1, I still get the same error mode and recovery.

  I tried searching online for compatibility with the new iOS and AC 1 problems but found nothing.

  I would like to know if there is more information I should provide that might help.

  Thank you for your time.

  Ben

  Hi Ben

  Makes your iPad successfully update to IOS 10, we have approximately 400 ipads, I've updated a single ipad at 10 IOS using our MacBook pro AC1 OSX El Capitan to test, ill try another now and see if its success.

  When you connect an ipad update the Configurator re-download the IOS 10 or use a cached copy?

  How your Configurator is connected to the internet (behind Proxy, Wifi, Ethernet), perhaps the downloaded IPSW file is corrupted and need to be redownloaded removed\.

  Kind regards

  Rick

• BBM on BB10 Dev alpha B problem

  Hey guys.

  I'm pretty new to this Blackberry thing (got my Dev Alpha on a Jam Session, it was great), this is my first Blackberry device (frankly, I don't like Blackberry pre-10) and I tried to integrate my BBM app, but I have not been able to access all the BBM. I tried re-flashing the unit and using a different BBID unsuccessfully, BBM opens with a "Temporary server error" screen, and the only option I get is to exit the application.

  Friends (who also have been on the Jam session and got their devices) tell me they didn't need anything else that WiFi for that BBM works, so I was really puzzled. If I have in some way did do something wrong?, Blackberry icon is displayed next to the WiFi, is it not enough for BBM work on the Dev Alpha?

  Thanks in advance.

  This problem has been resolved.  You may need to reset your BlackBerry 10 Dev Alpha if you continue to receive this error.

• HP Pavilion g7-2240us: problem with WiFi

  Hello.

  I had a few problems with the WiFi lately.

  Whenever I turn on the laptop, the internet conection is limited. I have to run the troubleshooting of Windows everytime I turn on my laptop to solve this problem.

  I've updated the Wifi drivers through Windows Update, but the problem persists.

  What can I do to fix this?

  Laptop model: HP Pavilion g7-2240us

  Windows 8

  There are many things that can go wrong with wifi.

  Here is a good place to start your troubleshooting.

  If the problem seems to occur when returning from Standby Mode, then you can move on to configuring power wifi Options.

  Most wireless devices can be disabled by the system for saving energy. In some scenarios of sleep, the unit is unable to wake up properly when the system comes back from sleep or hibernation. To avoid this, set the parameters of the wireless adapter power management

• Printer HP B209 "protected wifi configuration" wifi only?

  (How you get this thing online without one) good router market consumer with the configuration protected wifi or b button) add a usb print server?  If there is a radio, cannot connect to a regular WiFi with or without encryption?

  Hello

  The printer can be connected to a network.

  You can connect the printer using WPS, if your router supports this feature,

  Otherwise, you can connect the printer via the HP software in temporary connecting the printer to your computer with a USB port.

  Run the installation of the software, you will receive with the option to Recofigure the wireless connection.

  When prompted, plug the USB key and follow the on-screen instructions.

  Kind regards

  Shlomi

• Impossible to test in app dev alpha A

  Hello

  I need to test in-app on my alpha dev A. I purchase followed all of the steps for testing in sandbox mode. But when I try to add the release that it does not show the option for alpha dev and so I get the "Not available for this device" message when trying to download app on app World sandbox mode.

  I need to test in-app. How can I do?

  I've just loaded Alpha-A Dev with the last external beta, 10.0.10.263 and was able to find and install downloaded applications only for Z10 models that dev Alpha was not as a device supported successfully.

  After making the changes on the supplier portal, it may take up to 6 hours for those on the device because of caching.

• installation bar on Dev Alpha: 810/var/tmp/bar_665560 failure: cannot access the Member "META-INF/MANIFEST. MF'

  Can someone tell me what in the world does that mean? Get this error when trying to install my application signed my BB10 Dev Alpha device. This error is new to me.

  I troubleshoot-made with Marco a little offline time. Here were the issues being not package and deploy properly, I hope this will help others as well in the future.

  The problem was just a few things.

  Config.Xml

  -Lack of ownership application in the widget element ID

  http://www.w3.org/ns/widgets"
        xmlns:rim="http://www.blackberry.com/ns/widgets"
          version="2.0.0.0" id="your_app_id_goes_here">
  

  Index.html

  -Lack a script include.  I always use the Web Inspector Network tab to make sure all my includes load.  It's amazing to see how many times I did it personally

  -Lack of script include the WebWorks JavaScript BB10.  Don't forget with BB10, we include this

  -Missing "webworksready" event listener.  In the case of Marco, that didn't alter his app, but we must wait for this event before calling WebWorks API now.

  Practical links

  Example of file config.xml blackBerry 10

  https://developer.BlackBerry.com/HTML5/documentation/code_sample_creating_a_bb_widget_config_documen...

  Examples of 10 blackBerry applications

  https://github.com/BlackBerry/BB10-WebWorks-samples