Develop forms with VirtualBox

Similar Questions

• development of application forms with migration of the adf in mind

  We continue to maintain an oracle forms application which is scheduled for the re-engineering of oracle adf.
  
  in the world of forms with the current oracle it is customary with a new table to produce the dml with api table designer. the only api table will provide the primary key for records based on the used select value max + 1.
  
  If the re-engineering of oracle adf is a future requirement... so how should change to facilitate development?
  
  must provide the value of the primary key by a sequence and relaxation? and relaxation should look for a zero or negative value before completing when inserting?

  That triggers the code works fine. What happens is that ADF will initially have a negative number when the row is inserted, and so the relaxation will assign the actual value of the PK of the sequence. The other way (as documented) would fetch aggressively the ADF sequence when the row is created. I have used both approaches, but tend to lean a little towards relaxation.

  John

• Can I evaluate and fill out a form with data from a custom data object?

  I'm not a developer, but I'm trying to find as much information for my web team so they can implement this for me.  We use the E10.

  I have some information for the contacts stored in a data object custom I want to use for pre-population information access door and in another form.  For example:

  1. User enters his email address into a form and hands
  2. A search and contact and custom data object (CDO)
     1. If the contact has a CDO with the required information, he fills the following form with the information
     2. If the contact does not have the required ORDER, it displays information and a link to the place where to go next

  Is it possible, and where should I direct my developers learn more about treatments?

  Richard

  Hi Richard,

  You can certainly do so using data for the Eloqua Web search (Setup > data Web Look Ups). A database search allows you to request data stored in Eloqua, bring up the page and with a few JS, we determine if they will go on track 1 or 2 you described above.

  

  Is that an advanced feature requires knowledge of HTML and JS. Here is a good article on data search that should help:

  Using the Eloqua Cookie to customize your Web site

  If you have any specific questions, our support team is very familiar with this feature and can help to solve problems or answer specific questions.

  -Andrew.

• How to create a contact form with captcha

  Hello

  I am new to Dreamweaver. I created a new site "bootstrap", but I'm stuck on the creation of a contact form for this.  I can probably understand the shape of DW, but have no idea how to add a captcha for security or how to install a program on the side server.  Can anyone help?    Thank YOU!

  the_shocker wrote:

  Dreamweaver does not features side server so this isn't a matter of Dreamweaver. You might be best to ask your server provider questions specifically related to a feature that is or is not enabled on your server.

  best,

  Shocker

  For the life of me I don't understand why anyone would go through the trouble of ringing these discussions just to get their best to not be useful.  It seems to me that since Dreamweaver allows you to create/write/upload php pages and the whole purpose of Dreamweaver is to create websites, and 80% of web sites using php, looks like a discussion of php in this Dreamweaver forum is quite appropriate!

  But that's just me.

  To my personal goal of trying to be helpful, I want to update this topic:

  The contact form is finally resolved.  I made a contact form with the beautiful shape of Nancy O at: Alt-Web Design & Publishing: Contact form sensitive with 3.2 Bootstrap and PHP (part 1)

  that has saved a lot of time, and I ended up hiring a developer at Fiverr (www.fiverr.com/abd_soft/write-fix-and-correct-your-php-script) which converted my existing script of SMTP mail.  He also created a redirect page slick for me for my old contact.htm page who turned into a contact.php page.  Of course, I've updated my site, but wanted the redirect in case there was some other links out there somewhere.

  I would like to paste the php code to be more useful, but the coding Manager put a copyright on the script that I paid for!

  If you try to install an authenticated SMTP contact form and you are not a developer, all I can say is GOOD LUCK.  I hope that my post is a bit useful.

• Develop forms in Flex

  Hello

  I have developed forms in LiveCycle Designer and began looking to make some of them in Flex. The goal is to have some hosted on a website or in an AIR application.

  I work with some online resources and tutorials (Tour de Flex, first steps in Flex, Adobe DevNet) who help a lot, but we are still struggling.

  I would be grateful if someone could point me in the direction of a good resource specifically for forms. I'm capturing some best practices at the beginning rather than discover it at the end.

  Also I have problems printing and to tackle differences in dealing with page formats (designer of LK) for dimensions in pixels (Flex). Again, if someone could point me in the direction of printing for forms solutions, it would be great.

  Thank you

  Niall

  Print and flash player are long time enemies

  If you want to generate the search for good forms, you should consider the generation of pdf. Some links:

  http://devgirl.WordPress.com/2008/11/03/generate-PDFs-from-your-Flash-Flex-and-air-apps/

  http://AlivePDF.ByteArray.org/

  http://blogs.Adobe.com/mikepotter/2006/09/create_pdf_from.html

  http://www.sephiroth.it/weblog/archives/2010/02/purepdf_a_complete_actionscript_pdf_l.php

  Dany

• Form with nested iframe stumper

  
  I have a form with a nested iframe. At the top of the form (outside), there is a drop-down list that is used to filter a large table of data in a smaller set of results. The iframe displays the result in a table/grid, and each line has a check box. The form must also have a button 'send' (outside), which updates a second table of database with lines selected from grid iframe entries that have been selected using the checkboxes.
  Thus, the function of filter of the form creates the content of the iframe, and form submit button uses the selected content of the iframe to perform a database insert.
  Is this possible? Thank you!

  Thanks for the tips. I know I have to move to learn javascript, one of these days (and I already joined a few freebies open source in my site) but I also find that javascript solutions are used when they are not needed, and because I work with a very compressed development schedule, I can't really take too much time out for study.
  Thanks again!

• A problem with the display in a form with a ScatterGraph

  Hi all!
   
  Now, I want to do an image that can be expanded outside and inside with the viewport in a form with a ScatterGraph window. I tried previously to do this picture as a backdrop, but the backgroundpicture cannot be zoomed with the display window. How can I solve this problem?

  Here is the picture:

  

  Or I have to calculate a large amout of points to sign on the coordination of xy without the image, and how can I register quickly because it takes a long time to calculate.

  Hello

  You can zoom/dΘplacer an image as well as the plot in charts. Here is a snippet of code showing how you can do it.

  Normal
  0

  fake
  fake
  fake

  EN-US
  X NONE
  X NONE

  MicrosoftInternetExplorer4

  / * Style definitions * /.
  table. MsoNormalTable
  {mso-style-name: "Table Normal";}
  MSO-knew-rowband-size: 0;
  MSO-knew-colband-size: 0;
  MSO-style - noshow:yes;
  MSO-style-priority: 99;
  MSO-style - qformat:yes;
  "mso-style-parent:" ";" "
  MSO-padding-alt: 0 to 5.4pt 0 to 5.4pt;
  MSO-para-margin-top: 0;
  MSO-para-margin-right: 0;
  MSO-para-margin-bottom: 10.0pt;
  MSO-para-margin-left: 0;
  line-height: 115%;
  MSO-pagination: widow-orphan;
  font-size: 11.0pt;
  font family: 'Calibri', 'sans-serif ';
  MSO-ascii-font-family: Calibri;
  MSO-ascii-theme-make: minor-latin;
  mso-fareast-font-family: "Times New Roman";
  mso-fareast-theme-make: minor-fareast.
  MSO-hansi-font-family: Calibri;
  MSO-hansi-theme-make: minor-latin ;}
  table. MsoTableGrid
  {mso-style-name: "Table Grid";}
  MSO-knew-rowband-size: 0;
  MSO-knew-colband-size: 0;
  MSO-style-priority: 59;
  MSO-style-unhide: no;
  black border: solid 1.0pt;
  MSO - border - themecolor:text1;
  MSO-border-alt: solid black .5pt;
  MSO - border - themecolor:text1;
  MSO-padding-alt: 0 to 5.4pt 0 to 5.4pt;
  MSO - border - black insideh:.5pt United.
  MSO-border-insideh - themecolor:text1;
  MSO - border - black insidev:.5pt United.
  MSO-border-information - themecolor:text1;
  MSO-para-margin: 0;
  MSO-para-margin-bottom: .0001pt;
  MSO-pagination: widow-orphan;
  font-size: 11.0pt;
  font family: 'Calibri', 'sans-serif ';
  MSO-ascii-font-family: Calibri;
  MSO-ascii-theme-make: minor-latin;
  MSO-hansi-font-family: Calibri;
  MSO-hansi-theme-make: minor-latin ;}

  Image img = Bitmap.FromFile ("myImage.jpg"); in pixels, this is the place where the image will be drawn RectangleF initialRectangle = Rectangle.Empty; in the data, to map coordinates the image XRange range; Range yRange; Private Sub PlotMyData() { plot your data here xData double [] = new double [] {3, 5, 7, 5, 8, 3, 7, 8, 2, 6}; Double] yData = new double [] {9, 1, 2, 6, 8, 3, 3, 6, 2, 2}; scatterGraph1.PlotXY (xData, yData); xRange and yRange define the plot area limits left-top to bottom-right xRange = new range (xAxis1.Range.Minimum, xAxis1.Range.Maximum); yRange = new range (yAxis1.Range.Minimum, yAxis1.Range.Maximum); RecalculateImageBounds(); } Simply map the data coordinates values in pixels posts from the top left and lower right must be mapped. Private Sub RecalculateImageBounds() { PointF size = scatterPlot1.MapDataPoint (scatterGraph1.PlotAreaBounds, (xRange.Maximum, yRange.Minimum); initialRectangle.Location = scatterPlot1.MapDataPoint (scatterGraph1.PlotAreaBounds, xRange.Minimum, yRange.Maximum); initialRectangle.Width = size. X - initialRectangle.Location.X; initialRectangle.Height = size. Y - initialRectangle.Location.Y; } Just draw the image. Private Sub scatterGraph1_BeforeDrawPlot (sender As object, BeforeDrawXYPlotEventArgs (e) { RecalculateImageBounds(); e.Graphics.DrawImage (img, initialRectangle.X, initialRectangle.Y, (initialRectangle.Width, initialRectangle.Height); }

  Make sure that the image is of good quality so that you can zoom in pretty close.

  I hope this helps.

• a simple form with the "submit" button: can it look better?

  Hi all

  I did not imagine that a simple form (with Textfields and ChoiceFields) could do a lot of problems:

  I would like to ask a few basic questions about it. First the code (Simplified):

     GridFieldManager formfm;    
  
          EditField surname = new EditField("", "-", 25, Field.FIELD_LEFT | Field.FIELD_VCENTER | EditField.FILTER_DEFAULT);
      EditField email = new EditField("", "-", 25, Field.FIELD_LEFT | Field.FIELD_VCENTER | EditField.FILTER_EMAIL);
  
      public FormFieldManager(){
  
          formfm = new GridFieldManager(2,0);
  
          formfm.add(new LabelField("who: ", Field.FIELD_RIGHT | Field.FIELD_VCENTER));
          String[] choicewho = new String[] { "Mr", "Mrs", "Miss" };
          ObjectChoiceField who = new ObjectChoiceField("", choicewho, 0, Field.FIELD_LEFT |Field.FIELD_VCENTER);
  
          formfm.add(who);
  
      formfm.add(new LabelField("Surname :", Field.FIELD_RIGHT | Field.FIELD_VCENTER));
      formfm.add(surname);
  
      formfm.add(new LabelField("E-Mail :", Field.FIELD_RIGHT | Field.FIELD_VCENTER));
      formfm.add(email);
  
      ButtonField sendButton = new ButtonField("Send", Field.FIELD_HCENTER|ButtonField.CONSUME_CLICK);
      formfm.add(sendButton);
      FieldChangeListener listenerSendButton = new FieldChangeListener() {
      public void fieldChanged(Field field, int context) {
  
      try {
          String data = "send=true&surname=" +surname.getText();
          data += "&email=" + email.getText();      httpPost("http://bla/sendData.php", data);
      } catch (IOException e1) {
          e1.printStackTrace();
      }
      formfm.deleteAll();
      formfm.add(new LabelField("Grazie!"));
      }
    };
    sendButton.setChangeListener(listenerSendButton);
  

  now my questions:

  (1) don't miss something (style) for the EditFields? At the present time, it is possible to change them, but the behavior (9700 Simulator) is strange: it is 'difficult' to get from one field to the other and everything moves sometimes when editing...

  How do you define a standard form that seems 'normal' and can be completed as expected in other applications? (Swifts nothing, it is possible to access the next field with the expected key / trackpad (I have no touch screen)) and so on?

  The EditFields do not even have a border, but I guess that's the standard case on BlackBerry.

  (2) the ObjectChoiceField is also very ugly... It's too big... Is it not possible to reduce the size without much effort? (I couldn't everride it correctly). (I also tried with radio buttons, but unfortunately I can't add a RadioButtonGroup to my LayoutManager, strange)

  (3) it is perhaps a stupid question: I can't get the text selected from the ObjectChoiceField (to send it can in data).

  AM EditField, it's simple:

  editfield.getText()
  

  But how is it with my ChoiceField?

  I found getSelectedIndex() but it provides a value int not text...

  Thanks in advance for any suggestions!

  silizia

  1. you have defined fields as follows:

  EditField family name = new EditField ("vorname:", "-", 20, EditField.FILTER_DEFAULT);

  The 20 means 20 characters, so it's all the field allows you to enter.

  2. Yes, the mail filter is pretty useless.  Use the EmailAddressEditField instead

  3. you can play with the scroll, but the best thing to do is to set the focus on the first field that you want people to pull together - usually the upper part of the form.

• PDF form with several auto pages copy text in fields on the following pages

  I created a PDF form with multiple pages. I started with an Illustrator file, then exported to Acrobat to make it complete. For some reason any, however, when users enter text on the first page and try to continue on the other, the text on the first page only auto copies on the following pages. And if you delete what was on the second page (or third) to enter the correct data, which provides information on the first page.

  I guess it must be something that twisted when I was creating the form, so I don't know if there is a way to fix without all over again.

  Thank you!

  Give a unique name to each field. The fields with the same name are copies of each other and will automatically have the same value.

• call report forms (with or without parameters) oracle apex

  Hello

  I want to know if I can call report forms (with or without parameters) oracle apex?

  Thanks in advance

  Try to look at this blog: Roels Blog: integration of forms and the APEX: APEX calling forms

  Thank you

  Tony Miller
  Software LuvMuffin
  Ruckersville, WILL

• How to create a form with a submit in CC button animate using Actionscript 3

  How to create a form with a submit in CC button animate using Actionscript 3. The file will first be a SWF but will also have the flexibility to export as HTML5

  I've searched high and low for an example of code for this entry.

  Can someone help me please?

  Thank you

  You can use the same graphic assets of basis for two projects, but the coding will be different for everyone.  You must work on the project of a code at a time.

• I created a form with checkboxes.  A question has two boxes for a 'yes' another being a 'no '.  I just want to be able to select a single box, but currently, I choose both

  I created a form with checkboxes, I have currently two checkboxes in a question that I wish I could only check a box and make it mandatory that should be checked only one box.  Currently, I am able to select the two check boxes.

  Give them the same field name, but export values.

• I made a form for my clients, I did this form with a button "submit" button, the button will save the form and send it, I did the URL to go to a different (different to mine) e-mail address but when I distribute the form and it is complete

  I made a form for my clients, I did this form with a button "submit" button, the button Save the form and send it, I did the URL to go to a different (different to mine) e-mail address but when I distribute the form and it is supplemented by my clients it send to my email address not the URL how to change this.

  No matter how you have configured the Send button when you use the feature distribute the form. There are some e-mail address is in your identity preferences (Edit > preferences > identity) and use it. If you can change the email address it or not to use distribute the form and the button send the value you want.

  One thing that happens when you use the feature to distribute the form is the form is enabled Reader, you can do separately, but you really shouldn't do if the form must be used by others. The dispenser a form must activate using their copy under license of Acrobat Reader.

• Wizard built in form with Validation issues

  APEX 4.2.4, running with the Wizard built in form, with a collection as a source of data from a table. I have a manual process to save the data in my table, but I have a couple of columns having validation Wizard built on them.  When I try and save I get the message annoying that it means my data are tool and I need to update my table...

  I thought that this could be due to having disabled on my form, or perhaps because of the unalterable columns columns...  However, when I went and built a manual validation routine (have look through the g_f00x table storing data from columns one) I was still able to get this annoying message "Outdated information" to appear...

  Does anyone have a reliable solution when using forms in a table to get rid of this message?

  (Previous conversations showed my group here how to remove the "Save before paging message", then perhaps another similar solution there...)

  Thank you

  Tony Miller

  Ruckersville, WILL

  Tony Hey,

  Only point fcud table?

  You can just run

  $("input[name=fcud]").val("C");
  $("input[name=fcs]").val("");
  

  No need to use. each(). I have not really a configuration with a form of hybrid tab on a collection at hand to test, but I think that just those of compensation and submission should not produce these errors. I could be wrong however. Try to start with debugging to see if you can spot something?

• form with smtp authentication

  When muse updated it contact form with smtp authentication, must that cause of change encoding manually is a big problem for a lot of people I've read about community support for third party servers. I wish that adobe would add this feature in the Muse as soon as possible. We took muse especially if we could not do coding

  Muse requires PHP sendMail to be supported. Please feel free to add to our ideas section.

  Thank you

  Sanjit