Development of a method for the actions of repair in a sequence

Similar Questions

• Define a map or ORDER method for the object type

  Hi gurus

  I created an object and then its type and then I use this object and type based on line, see below:

  Create the object

  CREATE OR REPLACE

  TYPE test_object

  IS

  OBJECT

  (

  next_appearance_dt DATE, - next_appearance_dt

  youth_adult VARCHAR2 (5) - youth_adult

  ) ;

  
  /

  Create the object Type

  CREATE or REPLACE TYPE t_docket_object IS TABLE OF THE test_object;

  /

  Create function Pipeline

  FUNCTION to CREATE or REPLACE f_report (p_dt date, p_c_cd VARCHAR2)
  return t_test_object pipeline
  IS
  BEGIN
  FOR J IN)
  Select distinct test_object)
  next_appearance_dt,--862,
  'YOUTH '.
  ) AS test_object
  Jen.next_appearance base
  WHERE 1 = 1
  AND (base.next_appearance_dt = p_dt)
  AND (base.circuit_point_cd = p_c_cd)
  - and cse.information_id = 322
  -ORDER 15 - alias_name
  )

  loop
  PIPE ROW (J.test_object);
  END loop;
  END;

  /

  Run function

  SELECT * FROM TABLE (F_REPORT (TO_DATE('25-sep-2015','dd-mon-yyyy'),'1 '))

  Error

  ORA-22950: cannot ORDER objects without map or ORDER method

  ORA-06512: at "F_REPORT", line 5

  22950 00000 - "cannot ORDER objects without map or ORDER method.

  * Cause: an object type must have a defined for map or ORDER method

  all comparisons other than equality and inequality comparisons.

  * Action: Define a map or ORDER method for the object type

  I know the reason of this error and the reason is that I use the clause separate in my pipeline service, but do not know how to get rid of this error...

  Confuse you the type of table with the object type. He forge

  Select test_object (next_appearance_dt) test_object

  Not:

  Select t_test_object (next_appearance_dt) test_object

  Then:

  SQL > CREATE OR REPLACE
  FUNCTION f_report (DATE p_dt 2,
  3 P_C_CD VARCHAR2
  4                   )
  5 t_test_object of RETURN
  6 IN PIPELINE
  7 EAST
  BEGIN 8
  9 FOR (IN) v_rec
  10 WITH () DID
  11. SELECT TO_DATE('01-jan-2015','dd-mon-yyyy') NEXT_APPEARANCE_DT
  the double 12
  13                                  )
  14 select test_object (next_appearance_dt) test_object
  15                          from  t
  16                      ) LOOP
  PIPE 17 ROW (v_rec.test_object);
  18 END OF LOOP;
  END 19;
  20.

  The function is created.

  SY.

• Where the log file is located (Win Vista) for the actions of OTHER USERS have taken to using the boxes in user account control?

  Where the log file is located (Win Vista) for the actions of OTHER USERS have taken to using the boxes in user account control?

  I use the version of Vista Home Premium.

  While I don't really like how the UAC area enters the information that tells it when to display the box tell me about your work of things on the UAC (I know an article exist on the web), is not how to answer this question.

  There is no log of UAC elevation file.

• How can I add "Shut down" as an option for the action of the Power button if it is not available

  How can I add "Shut down" as an option for the action of the Power button if it is not available.

  Hello

  Welcome to the Microsoft Community and thanks for posting the question. Looks like you want to add shut down as an option for the power button.

  Visit this link and try the steps mentioned:

  There are two ways to change what happens when you press the power button on your computer. You can change what happens when you press the power button on your computer case (or the edge of your laptop) and you can change what happens when you press the close button in the start menu.

  Change what happens when you press the power button on your computer

  http://Windows.Microsoft.com/en-us/Windows7/change-what-happens-when-you-press-the-power-button-on-your-computer

  Hope this information helps. If you have questions to answer us and we will be happy to help you.

• Binds the exportXFAData(); method for the saveAs event

  I have an XFA form that was built with LiveCycle and I try to write javascript to Adobe who will export the form data to an XML file whenever a user manually saves the file in Acrobat. Preferably, this feature is easily sharable, because I have clients who need to have this ability.

  I'm a novice, but it seems that the interactive objects are grey and so I can not add a custom button. That's why I hope to link the exportXFAData(); method for the saveAs event. When a user does CTRL + S or file > save (sub)... the XML should be exported to the desktop.

  It seems that I have to use the exportXFAData() or exportAsXFDF() method.  I found something that says: " it is a very simple process to do this, use the method saveAs Doc object... " and copy the following code:

  
  

  this.saveAs ("/ c/temp/test.xml", "com.adobe.acrobat.xml - 1-00");

  I do not know where to write this code, or if it must be adapted (not to mention that the path) to accomplish what I asked above.

  Thank you very much,

  
  

  
  

  Carl

  
  

  It does not export form data, as far as I know, but another schema. There is a different method for acroforms export but I don't know for XFA forms. You should check the reference XFA JavaScript, not google.

  The example you found is not in any way binding to the SaveAs event. Rather, it uses a special feature of the document.saveAs method that allows you to save/export other formats instead of PDF, such as file options > save as. The code generally added to a button, but do not work (see below). I don't know if you can run this in an event WillSave or similar, that; s a separate exercise.

  Don't forget to read the XFA JavaScript document for this method since it will have security restrictions designed to stop incorporating any kind of back up/export to a file - because think havoc if a PDF file that you have downloaded begins to silently save/export the files to your computer. Do not try to use acroform rather documentation! And I see that what you quoted DC Acrobat SDK Documentation applies to the acroforms.

  For more specific help, I suggest the LiveCycle Designer forum. We are dealing here Acroforms.

• ORA-19030: invalid method for the schema not based XML Documents

  Hi everyone can u help me please when I am trying to execute query below his throw errror

  DECLARE

  doc xmltype.

  BEGIN

  SELECT

  XMLAGG (XMLElement ("employee",

  XMLAttributes)

                    ' http://www.Oracle.com/emp_simple.xsd ' AS 'xmlns',

                    ' http://www.w3.org/2001/XMLSchema-instance ' AS ' xmlns: xsi ",

                    ' http://www.Oracle.com/emp_simple.xsd

  http://www.oracle.com/emp_simple.xsd'

  AS "xsi: schemaLocation").

  XMLForest (e.employee_id LIKE "EmployeeId",

  Select AS "name."

  e.job_id AS "Job."

  e.manager_id "MANAGER."

  e.hire_date AS "Hire Date"

  e.Salary AS "wages."

  e.commission_pct AS 'The Commission',

  XMLForest)

  d.department_id AS "DeptNo."

  d.department_name AS "DeptName",.

  d.location_id AS 'Place') AS 'Dept')))

  in the doc

  E employees, departments d

  WHERE e.department_id = d.department_id;

  doc.schemaValidate ();

  END;

  /

  The error I get is following

  ORA-19030: invalid method for the schema not based XML Documents

  Yes, Odie meant something like that.

  See how the employee node can now occur more than once in the employees node.

• Get performance statistics of a VM method for the last 2 hours

  Need a scipt for toolkit VI to obtain performance statistics of a VM method for the last 2 hours

  What metrics (cpu.usage.average, disk.usage.average...) are you looking for?

  Have you tried one of the preconfigured metric collections (Cpu, memory, disk, network) which are available in the cmdlet Get-Stat?

  An example with the scope of the Cpu

  get-vm  | Get-Stat -Cpu -Start (Get-Date).addhours(-2) -IntervalMins 2 -MaxSamples 60
  

• dynamic generated tabs of the table, can not get the values incremented for the action of the button

  HI -.

  Here is the configuration:

  I have a basic table that has 6 values in there (i.e. the tabs).

  The tabs are generated without problem and when I discover things six show.  For example:

  Video clip: frame = 1 Target = "_level0.tabsMC6"

  so it's cool.

  Now when I go to configure the action of button for these babies, if I use the _level0.tabs.MC6 so that I can trigger button available for this tab or one if I change the value of tabsMC.  What I want to do is to try to reduce the code and have an increase in value of tab, but the best I could achieve is to have the last work in the tab.  What is interesting is that if I try an other tabs (1-5) they are all trigger tab #6.

  What I have right now is:

  function tabCount (): Void {}
  for (i = 0; i < _root.slideContainerMC.tabList.length; i ++) {}
  _level0 ["tabsMC" + i].clickerMC.onRollOver = function() {}
  _level0 ["tabsMC" + i].gotoAndStop("on");
  }
  }
  };

  (Note: tabList is the picture I mentioned above and Yes, in an another MC, which = code in every sense but I'm in a hurry)

  I need guidance is how to get all the tabs for the actions of the individual buttons.  I thought that the script above woul have then button actions for

  tabsMC1

  tabsMC2

  tabsMC3

  tabsMC4

  tabsMC5

  tabsMC6

  what it does exactly.  tabsMC6 is the only tab that will show you the status 'on' - I can ride on one of them, and it's the only tab that says this rather than EACH tab showing a State.

  Looks like I'm missing what is obvious!

  Thank you!

  you define tabMC0,..., tabMC5.  If you want tabMC1,..., tabMC6 use:

  function tabCount (): Void {}
  for (i = 1; i<=_root.slideContainerMC.tabList.length; i++)="">

  _level0 ["tabsMC" + i] .ivar = i;

  _level0 ["tabsMC" + i].clickerMC.onRollOver = function() {}
  This._parent.gotoAndStop("on");
  }
         
  _level0 ["tabsMC" + i].clickerMC.onRollOut = function() {}
  This._parent.gotoAndStop ("OFF");
  }
         
  _level0 ["tabsMC" + i].clickerMC.onRelease = function() {}
  This._parent.gotoAndStop ("delivery");
  }
  }
  };

  and the ivar part provided that you would need the ith tab to know that it is the ith tab.  Ivar stores that I have the value used when this particular tabMC was created.  If you don't need that, delete it.

• Point for the action Menu spacing: set an action item to appear in the menu of the action at the bottom?

  How do you define an action item to appear in the menu of the action at the bottom? As the point to delete shown here:

  https://developer.BlackBerry.com/Cascades/documentation/Getting_started/porting/mapping.html

  

  You would most likely want to start with https://developer.blackberry.com/cascades/reference/bb__cascades__deleteactionitem.html and discover the parent class.

  The text suggests that the title and icon appear in the standard only if you do not specify your own when you add the element, so there is hope, you can fake it.

• Method for the VerticalFieldManager sublayout problem

  Hello

  I need help.

  I have a value for money (VerticalFieldManager) that contains several different fields. My goal is to add a small margin of 10px between all areas. The reason is that the fields are very close together and it doesn't look very good.

  Here is my sublayout of value for money.

  public void sublayout(int w, int h) {
     super.sublayout(w, h);
     Field field;
     //get total number of fields within this manager
     int numberOfFields = getFieldCount();
     for (int i = 0;i < numberOfFields;i++) {
        field = getField(i); //get the field
        int y = 0;
        layoutChild(field, w, field.getHeight()+10); //lay out the field
        setPositionChild(field,0,y); //set the position for the field
        y += field.getHeight()+10;
     }
     super.setExtent(w,h);
  }
  

  The result of this seems ok, but when you scroll down it behaves as expected, so somewhere must be my mistake.

  I know there is the 6.0 API setMargin method, but I need something that will also help for the old OS and I have no idea how to do it.

  Thank you all for the help.

  Jiri

  For the task that you have a default VerticalFieldManager with on the battlefields setMargin is quite sufficient. Although setMargin is only documented in 6.0, we work like this forever - at least 4.2.1 probably even earlier.

  As to why it does not work the way you want it to work: your sublayout must set at least the virtual measure correctly. Now he acts as if USE_ALL_WIDTH | USE_ALL_HEIGHT | NO_VERTICAL_SCROLL | NO_HORIZONTAL_SCROLL all are in force.  The first two are "affected" by setExtent (w, h) instead of accumulated height and maximum width; the last two--using only not setVirtualExtent, which defines the size of managers as opposed to visible size (setExtent) scrolling.

  Play with sublayout without calling super.sublayout is a tedious task; If you want to see some better examples (but not perfect), take a look at the source code of advances of buttons, fields and managers (especially NegativeMarginVerticalFieldManager).

  To jprofitt: getPreferredWidth / getPreferredHeight are totally unnecessary on managers. Framework blackBerry completely ignores these; some fields use their own default dimensions (ButtonField being the most notable example), but it's just as much as those who will go.

  Edit: just noticed something else that is totally wrong with your code: using field.getHeight () before laying on the field! Until the field was laid out, its getWidth and getHeight have both return 0. Yet once again, take a look at what NegativeMarginVerticalFieldManager use as parameters for layoutChild.

• 5.5 for the Actions of Photoshop CC does not properly

  I have a set custom actions that I used in 5.5 I loaded to CC 2015. The actions do not run properly. The simplest of actions such as turn left and right used to run automatically with a click of a button. Stocks now stop on each step. I checked and they all get to run fast. Tried to rebuild the simple actions first, I'm running into the same problem when starting from scratch. I also tried delete and add actions, but have the same problem. Help solve this problem is appreciated. The problem is on my laptop, Macbook Pro and my iMac 10.10.5.  Thank you.

  It sounds like formerly, you click on the box on the left of an action or action set you either has not paid attention to the warning that all dialog boxes action steps would turn on and be interactive.  This cannot be undone. Or at some point, you turn off this warning message.

  Drag the action defined in the action palette to the Palette of Action trash to unload. Then load all of the action.

  

• How the Add method for the control of data already created WebService

  I have total 3 methods in WSDL, and I chose one method during the creation of control data to the web service and its job very well.
  
  But now I want to add an additional method of WSDL. is it possible to add without re-creating? How to do this?

  I do not think that we support a data control WS existing in a kind of approach to the Publishing Wizard - you are without doubt better re - create the data control.

• Method for the command run repeatedly

  I'm looking for a method periodically run a command in the background process. For example, I want to increment a variable count every 10 seconds. How could I go over to achieve this?

  Starting a background application.  In this launch a clock and schedule it to run as often as you wish.

  Search the forum for more details of running background Applications.

  I would like to start it running as a normal user interface Application until you have sorted subtleties.

  This kind of thing is not negligible for new Blackberry developers, but it pays to look at the API and search the forums.

• OSB: Changes of variables in context for the action of "answer".

  Hello
  
  What are the differences between the changes made by the OSB to all context variables (body, entering, leaving etc.) what answer successfully is used and response with failure is used.
  
  I have a service Proxy another proxy service B by RouteTo consumption.
  
  When B has meet with success, one gets the response and the fault does not receive the product on A.
  
  But when b respond with error, fault to be generated on A.
  
  In both cases, the xml response that sends B is same. So, what makes the generation on A fault. How would a knowledge that the fault must be generated.
  
  Please help understanding.
  
  TIA.
  
  Published by: Ashish Rane on December 21, 2012 06:01

  A response action will always return the contents of the variable $body as it is. The difference between replica successfully and meet with failure lies in the content of the return transport headers. In case of HTTP Service, if you do a response successfully, the application/service call will be received code HTTP status 200 or 0, which is a success for HTTP status code. If the default answer, call service/application will receive HTTP 500 status code, which will allow the management of errors in a calling service/application to trigger. Best practice for SOAP services based must always replace content of $body with a SOAP fault when you do a response with the failure so that the calling application has received details of the fault (otherwise it is just transport failure status code but the content of the response will be always content original $body who cannot indicate what was the mistake)

• Save doesn't work is not for the actions of scrolling

  In check-in demo mode, scrolling actions do not register properly... I created demos how to find information on our Intranet. For example, I scroll down to a specific menu item and click the item.
  
  I replay the recording and the works of scrolling, but then it goes back to the position of the screen before the scrolling action and highlight box and position of the mouse to the button so I had to click on is invalid.
  
  It did not Captivate 2... Maybe I need to adjust the settings? I tried to enter manually the print screen (PrtSc) after the scrolling action, but it does not work.

  I'm having the same problem. I also have posted about this, but received no response.

  I do a manual page when I'm done to scroll or do a drag / move. I copy the background of the manual screenshot, then paste it as a the incorrect slide background. It's annoying, but I've done half my demos in 2 and half in 3, so I'm stuck with 3.