Method for the command run repeatedly

Similar Questions

• Trying to enter gpedit.msc in the command run. Does not. Try to disable auto-start for usb devices.

  Hello. I read that I can go in gpedit.msc through the command run. I can't get in. He tells me this message: "Windows cannot find 'gpedit.msc'. Make sure you typed the name correctly, etc... »

  It is the process that a memory patriot employee was told in email: Ok then please try this.

  1. click on start, run, type Gpedit.msc in the Open box, and then click OK.

  2. under Computer Configuration, expand models of administration and then click System.

  3. in the settings pane, click on disable AutoPlay and then click Properties.

  4. click on active, then on all players in turn it off the AutoPlay box to disable AutoPlay on all drives.

  5. click OK to close the turn off AutoPlay Properties dialog box.

  6. restart the computer.

  Thanks for choosing Patriot Memory.

  The problem I have is I plug in some usb drives and I don't want to open. I want to do all of them open or no. They seem to now open fine, it's not autoplay'ing I want to do.

  Thank you.

  GPEDIT is functional on windows XP Pro, xp family, that it will not work... In addition,

  If the USB functions are a problem, either upgrade the software of the chipset, either install the

  youre MB mfg software (intel, amd, etc.), the "chipset installation utility" has drivers,.

  software & programs of the operating system for its proper use. If you are running XP pro, & have installed chipset

  utility, then the procedure to run GPEDIT will be here: http://social.technet.microsoft.com/Search/en-US?query=GPEDIT&ac=3

• User names found using the command run "control userpasswords2" do not match my user accounts

  Hello, on the #4 computer, when I use the command run, I get a list of 4 users. A, B, C, and comments.
  When I look in Control Panel I see 4 users, A, C, D and comments.
  When I go to C\:Users I see B, C, D and comments.
  I have problems with this computer #4, I get access denied, check the spelling, error code 8007005 0 x.
  All of these accounts should not match in computer #4?

  On my 3 other computers that can network with each other the results of the run command, results of the Panel control and C:\User results all correspond to A, C, D and are same as seen in Control Panel of the computer #4 comments.

  I think that the problem lies in computer #4 and is linked to the user names/accounts do not match. 4 computers user accounts all corresponding in Control Panel, so no problems.

  Don't you think that this problem of networking is related to incompatibility I describe? How can I fix this?   Gift of TIA

  Hello, on the #4 computer, when I use the command run, I get a list of 4 users. A, B, C, and comments.
  When I look in Control Panel I see 4 users, A, C, D and comments.
  When I go to C\:Users I see B, C, D and comments.
  I have problems with this computer #4, I get access denied, check the spelling, error code 8007005 0 x.
  All of these accounts should not match in computer #4?

  On my 3 other computers that can network with each other the results of the run command, results of the Panel control and C:\User results all correspond to A, C, D and are same as seen in Control Panel of the computer #4 comments.

  I think that the problem lies in computer #4 and is linked to the user names/accounts do not match. 4 computers user accounts all corresponding in Control Panel, so no problems.

  Don't you think that this problem of networking is related to incompatibility I describe? How can I fix this?   Gift of TIA

  I finally thought to it. They wore all the user names that came when I ran the command "control userpasswords2". As I said in my original post, user names in all the names of the Panel user control over all matching computers. The only conflict I've had was in the list of user names in the list found when I ran "control userpasswords2". I went to highlight the 'B' account after that I ran the command, you click Properties and changed his name to 'A'. This solved my access denied problem once and for all. Apparently he does not have all of the accounts in the control panel.

  Don

• Does not open the files shared via the command run

  We use a server in our Organization and we can connect to this server using RDP. But when we try to access shared files and folders in this server via the command run in the client by entering the IP address of the server asks it enter network password, and we enter the right username and password (I'm sure that I entered the password and user name correct to 100%) it displays 'failed to connect '. ': unknown username or bad password ". and if we took the same user name and password via RDP it will easily connect without any error. Please give us the solution for this problem.

  Kind regards

  Vijay Kumar C.M.

  Left thread (files, folders, and online storage) for (web and networks).

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. Appropriate in the TechNet forums.

  Please post your question in the TechNet forums: http://technet.microsoft.com/en-us/windowsserver/bb250589.aspx

  Thank you.

• Define a map or ORDER method for the object type

  Hi gurus

  I created an object and then its type and then I use this object and type based on line, see below:

  Create the object

  CREATE OR REPLACE

  TYPE test_object

  IS

  OBJECT

  (

  next_appearance_dt DATE, - next_appearance_dt

  youth_adult VARCHAR2 (5) - youth_adult

  ) ;

  
  /

  Create the object Type

  CREATE or REPLACE TYPE t_docket_object IS TABLE OF THE test_object;

  /

  Create function Pipeline

  FUNCTION to CREATE or REPLACE f_report (p_dt date, p_c_cd VARCHAR2)
  return t_test_object pipeline
  IS
  BEGIN
  FOR J IN)
  Select distinct test_object)
  next_appearance_dt,--862,
  'YOUTH '.
  ) AS test_object
  Jen.next_appearance base
  WHERE 1 = 1
  AND (base.next_appearance_dt = p_dt)
  AND (base.circuit_point_cd = p_c_cd)
  - and cse.information_id = 322
  -ORDER 15 - alias_name
  )

  loop
  PIPE ROW (J.test_object);
  END loop;
  END;

  /

  Run function

  SELECT * FROM TABLE (F_REPORT (TO_DATE('25-sep-2015','dd-mon-yyyy'),'1 '))

  Error

  ORA-22950: cannot ORDER objects without map or ORDER method

  ORA-06512: at "F_REPORT", line 5

  22950 00000 - "cannot ORDER objects without map or ORDER method.

  * Cause: an object type must have a defined for map or ORDER method

  all comparisons other than equality and inequality comparisons.

  * Action: Define a map or ORDER method for the object type

  I know the reason of this error and the reason is that I use the clause separate in my pipeline service, but do not know how to get rid of this error...

  Confuse you the type of table with the object type. He forge

  Select test_object (next_appearance_dt) test_object

  Not:

  Select t_test_object (next_appearance_dt) test_object

  Then:

  SQL > CREATE OR REPLACE
  FUNCTION f_report (DATE p_dt 2,
  3 P_C_CD VARCHAR2
  4                   )
  5 t_test_object of RETURN
  6 IN PIPELINE
  7 EAST
  BEGIN 8
  9 FOR (IN) v_rec
  10 WITH () DID
  11. SELECT TO_DATE('01-jan-2015','dd-mon-yyyy') NEXT_APPEARANCE_DT
  the double 12
  13                                  )
  14 select test_object (next_appearance_dt) test_object
  15                          from  t
  16                      ) LOOP
  PIPE 17 ROW (v_rec.test_object);
  18 END OF LOOP;
  END 19;
  20.

  The function is created.

  SY.

• Binds the exportXFAData(); method for the saveAs event

  I have an XFA form that was built with LiveCycle and I try to write javascript to Adobe who will export the form data to an XML file whenever a user manually saves the file in Acrobat. Preferably, this feature is easily sharable, because I have clients who need to have this ability.

  I'm a novice, but it seems that the interactive objects are grey and so I can not add a custom button. That's why I hope to link the exportXFAData(); method for the saveAs event. When a user does CTRL + S or file > save (sub)... the XML should be exported to the desktop.

  It seems that I have to use the exportXFAData() or exportAsXFDF() method.  I found something that says: " it is a very simple process to do this, use the method saveAs Doc object... " and copy the following code:

  
  

  this.saveAs ("/ c/temp/test.xml", "com.adobe.acrobat.xml - 1-00");

  I do not know where to write this code, or if it must be adapted (not to mention that the path) to accomplish what I asked above.

  Thank you very much,

  
  

  
  

  Carl

  
  

  It does not export form data, as far as I know, but another schema. There is a different method for acroforms export but I don't know for XFA forms. You should check the reference XFA JavaScript, not google.

  The example you found is not in any way binding to the SaveAs event. Rather, it uses a special feature of the document.saveAs method that allows you to save/export other formats instead of PDF, such as file options > save as. The code generally added to a button, but do not work (see below). I don't know if you can run this in an event WillSave or similar, that; s a separate exercise.

  Don't forget to read the XFA JavaScript document for this method since it will have security restrictions designed to stop incorporating any kind of back up/export to a file - because think havoc if a PDF file that you have downloaded begins to silently save/export the files to your computer. Do not try to use acroform rather documentation! And I see that what you quoted DC Acrobat SDK Documentation applies to the acroforms.

  For more specific help, I suggest the LiveCycle Designer forum. We are dealing here Acroforms.

• Error message: the software can be installed by using the command "run under...". ».

  I have amtrying to load the HP Photosmart D71000 series. Keep is error message: the software can be installed by using the command "run under...". ». Advice suggests logon as a user with administrator privileges. This was done and same message came.  Why?

  Try right click on the setup.exe > run as admin.

  If this does not work, try the Vista Hardware and drivers Forum:

  http://social.answers.Microsoft.com/forums/en-us/vistahardware/threads

  See you soon.

  Mick Murphy - Microsoft partner

• How to get to "local group policy editor" without typing gpedit.msc in the command run

  I'm so curious to know how to get to "local group policy editor" without typing gpedit.msc in the command run

  I'm so curious to know how to get to "local group policy editor" without typing gpedit.msc in the command run

  You can reach the 'local security policy' of

  Control of configuration\systeme and Security\Administrative tools

• Can I use other Adobe ID instead of the Adobe ID, used for the command to install and activate the Photoshop CS6?

  Can I use other Adobe ID instead of the Adobe ID, used for the command to install and activate the Photoshop CS6?

  Thank you

  Only ID authorized to use the software is the ID of the software license.

  Transfer an Adobe product license

• Hi, I got my subscription for the year running last for Photoshop and Lightroom. Because I had the good idea to download the 2015 CC of Photoshop, I return to the evaluation period. I would like to know, when this period ends, will I get my subscribed v

  Hi, I got my subscription for the year running last for Photoshop and Lightroom. Because I had the good idea to download the version of Photoshop CC 2015 (I thought it was just an update...), I get to the evaluation period.

  I would like to know, when this period expires, will I get my purchased version back or should I get a new subscription?

  If I get a new subscription, one is cancelled automatically, or do I have to do something else?

  Thanks a lot for the answers!

  If you are subscribed to the creative cloud, Creative Cloud 15 updates are included.

  If when you updated, all or part of the CC apps show 'trial start or buy now' in the creative cloud desktop application, please see this link:

  https://helpx.Adobe.com/manage-account-membership/CC-reverts-to-trial.html

• ORA-19030: invalid method for the schema not based XML Documents

  Hi everyone can u help me please when I am trying to execute query below his throw errror

  DECLARE

  doc xmltype.

  BEGIN

  SELECT

  XMLAGG (XMLElement ("employee",

  XMLAttributes)

                    ' http://www.Oracle.com/emp_simple.xsd ' AS 'xmlns',

                    ' http://www.w3.org/2001/XMLSchema-instance ' AS ' xmlns: xsi ",

                    ' http://www.Oracle.com/emp_simple.xsd

  http://www.oracle.com/emp_simple.xsd'

  AS "xsi: schemaLocation").

  XMLForest (e.employee_id LIKE "EmployeeId",

  Select AS "name."

  e.job_id AS "Job."

  e.manager_id "MANAGER."

  e.hire_date AS "Hire Date"

  e.Salary AS "wages."

  e.commission_pct AS 'The Commission',

  XMLForest)

  d.department_id AS "DeptNo."

  d.department_name AS "DeptName",.

  d.location_id AS 'Place') AS 'Dept')))

  in the doc

  E employees, departments d

  WHERE e.department_id = d.department_id;

  doc.schemaValidate ();

  END;

  /

  The error I get is following

  ORA-19030: invalid method for the schema not based XML Documents

  Yes, Odie meant something like that.

  See how the employee node can now occur more than once in the employees node.

• Get performance statistics of a VM method for the last 2 hours

  Need a scipt for toolkit VI to obtain performance statistics of a VM method for the last 2 hours

  What metrics (cpu.usage.average, disk.usage.average...) are you looking for?

  Have you tried one of the preconfigured metric collections (Cpu, memory, disk, network) which are available in the cmdlet Get-Stat?

  An example with the scope of the Cpu

  get-vm  | Get-Stat -Cpu -Start (Get-Date).addhours(-2) -IntervalMins 2 -MaxSamples 60
  

• What is the command run for removal of malicous tool?

  What is the command to run the malicous software removal tool?

  If the malicious software removal tool is installed on your machine you can start it by clicking on Start > click run > then type in MRT. EXE and press OK

  Instructions on how to use the tool can be found here: http://www.mydigitallife.info/how-to-use-windows-malicious-software-removal-tool-mrtexe-in-vista-xp-2000-and-2k3/

• Need help to remove the files of the United Nations necessary for the command line

  Original title: DELETING FILES

  I have a large amount of support .png files that have been placed on my C:\ drive, by some malicious programs or the system.  Whatever it is, I want to remove them because they take a disproportionate amount of space (about 25 GB to an indicative value).  They are in a sub-sub-sub etc directory and appear to be copies of random images as advertisements for computers, cars, soccer players and goodness knows what else, since every time I try to see, explore stops at halfway through, due to the large amount of files.

  So my question is: is there a way to delete these files without the help of Windows Explorer, for example by using a command line? or is there another utility of file management that I could use?

  I would appreciate help on this.

  Start > type CMD

  Right click on CMD and select run as administrator

  You type the command DEl as written in the link I mentioned earlier.  Just make sure that you type the location of the file and names as you see them on your system.

  This is another article about the MS BACK Del command

  http://www.computerhope.com/delhlp.htm

  Edit: This may be temporary files from Web pages, that you have seen.  Try this before you use the DEL command.

  Tools > Internet Options > general tab

  Click on delete

  Uncheck data Preserve favorite

  Check all the other available options

  Click on delete

  Windows will remove these temporary files

  Click Ok

  Then, go to start > my computer

  Select the C drive

  In search type *.tmp

  This is more temporary files stored on the computer

  Press Ctrl + A to select

  Press DELETE to remove all the

  You may receive a message file is in use, press on ignore

  Empty folder cookies as well - C:\Users\username\cookies

  Do not delete the file; all content

  I forgot to add.  Once you type the command del, press ENTER to execute it.

• Wait for the command, wait, batch, cmd file file, .bat, .cmd

  Hello, I am new on the BACK and script. I'm making a batch file or a .cmd file that run several files setup.exe, one after the other. The problem I have is that I can only find ways to delay based on TIME, rather than delay has not completed the first instance of setup.exe to start the following. Is there a command of the will that it is for me to run the first and then, once it is installed, run the second. The reason I need this works like this is that the second .exe does not work if one has not already been done. Thanks to you all.

  Please check on the Scripting Site at: http://technet.microsoft.com/en-us/scriptcenter/default.aspx where they offer a lot to help you create scripts, including a forum where you can post questions to people who are also specialists in scripts.  We do not cover this topic in the Forums of Windows answers.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.