Development of components for E-mail Cloud?

Similar Questions

• aid is the development of components for the AS3 video player

  Hi all

  I'm looking for a video player that

  can be resized at design time with should stretch controls (play, pause

  button, volume seekbar controls full button screen etc.)

  I found the same

  kind of player in AS2.0 here. The best part is that it can be resized in the design

  should have stretch of time with its controls.

  emehmedovic.com/xmca/toobplayer/

  You may have already looked at this but, you can use a flvplayback component that has no controls and then add the controls that you are interested in individually to the scene. You can then size and position the control components you want and then use Actionscript to connect each component control for the flvplayback component.

• When I start 38 beta 6, she prays for my mail acct PW. I cancel and it continues to pick up the mail OK. PW is stored.

  The acct of mail PW is stored in password manager. He doesn't want on later mark for the mail, only at the start of the program. If I get the PW, it just ask again... and again. If I cancel, it retrieves the mail.

  The password is for the Google Contacts. See https://support.mozilla.org/en-US/questions/1064153

  The developer may have abandoned the add-on to Google Contacts. Probably not so there an update anytime soon. I would be so disable the add-in in the Add-ons Manager for now to avoid the password invite you in the first place.

• What is the code name for intex fx cloud (required to manually build 2.0)

  I want to manually build the last B2G for an intex phone fx cloud. The build process requires executing the script "config.sh' with the name of the phone code:
  https://developer.Mozilla.org/en-us/Firefox_OS/Preparing_for_your_first_B2G_build#Configuring_the_B2G_build_for_a_mobile_device

  The phones operating system supported firefox page does not display the code name for new devices:
  https://developer.Mozilla.org/en-us/Firefox_OS/Developer_phone_guide/Phone_specs

  Is it possible to get the code for intex phone name. If the list of the devices supported by "config.sh" does not include the code name of intex, is there a way to still be able to build the latest os from firefox for the intex device?

  Hi Notalex,

  The code name for the Intex Cloud FX device is Tarako. However, it uses another optimized codebase that the regular B2G is based so that it can run on lower range with little memory devices.

  Unfortunately, version 2.0 of the B2G code base would go not on the Fx cloud Intex due to material limitations.

  For more information and advanced issues on customizing your Firefox OS device, you can visit the following pages:

  • Tarako Wiki device
  • #B2G on IRC channels

  I hope you find this information useful. Please let us know if you have any questions of usability with your new Firefox OS device.

  Thank you!! =)

  -Ralph

• What developer support options are available for the development of Java for the BlackBerry Smartphone?

  What developer support options are available for the development of Java for the BlackBerry Smartphone?

  What plans are available?

  Who can I contact with to register a support plan?

  One of the evangelists 'Developer' RIM working outside South Africa, I think, so there should be someone local you can talk too.  If you message Mark Sohm (the RIM name you will see a lot on the forum - MSohm), with your e-mail address and it ask to put you in contact with the Developer Evangelist in SA, which should help.  You can tell Mark to ask me if he needs clarification.  Do not promise anything either but I hope that something will happen.

• We filled the redemption for Adobe Creative Cloud code. The answer is that "this code has already been used. How do proceed us?

  We filled the redemption for Adobe Creative Cloud code. The answer is that "this code has already been used. How do proceed us?

  Hello

  If you buy the code, then creative cloud will assign to the e-mail address that you used to exchange the product.

  You may not receive the serial number for Creative cloud (not not required)

  You can download Creative Cloud application link below

  https://creative.Adobe.com/products/download/creative-cloud

  Once it is installed, log in with your e-mail address and click on the applications tab.

  You can see the installation option for your products.

• Error: Could not find compiled resource bundle "components" for locale "en_US".

  We are porting a large enough body of the Flex3 code developed as part of FlexBuilder 3 to Flex4 under FlashBuilder 4.  Most of the conversion seems to work very well, with one exception.  When I run the version of Flex4, all my exchanges of data with the server works.  Just as he is about to display the user interface, the following error occurs:

  Error: not found compiled resource bundle "components" for locale "en_US".

  I actually use a locale of en_US, but I guess that it could not conclude that revenue back to en_US, has yet again and then barfed.  If I look in

  ~ Adobe Flash Builder 4\sdks\4.0.0\frameworks\locale\fr_FR

  I see a lot of swc and of course not «components.swc» files  I think the problem is that our code Flex3 is using mx components, and compatibility mode is not correctly handles it for some reason any.  I think it is mainly from our internal user interface library.  The properties of this library (and for my main application, I'm testing now) have:

  -Use default SDK (currently 'Flex 4.0')

  -Use Flex 3 compatibility mode

  -Use the minimum version (Flash Player) required by the Flex SDK kit

  -Enable strict type checking

  -Enable warnings

  I also tried to put the compatibility flag command-line compilation mxmlc, without a change in behavior.  This project is built with the following script:

  Ruby scripts/concat_properties.rb o resources.properties ^.
  src/main/Flex/local/FR_Common/res_myname_fr_common. Properties ^.
  src/main/Flex/local/FR_Common/Scout/res_myname_scout_fr_common. Properties ^.
  src/main/Flex/local/en_GB/res_myname_fr_fr. Properties ^.
  .. /.. /Scout/common/src/locale/FR_Common/mypals/resources.properties
  mxmlc-local = en_US-source-path =. ^
  -compatibility-version = 3.0.0. ^
  static-RSLS = true ^.
  -resources include-resource-bundles = ^.
  -output src/main/resources/bundles/mypals/fr_fr_resources.swf
  copy src\main\resources\bundles\mypals\fr_fr_resources.swf ^.
  bin-debug\bundles\mypals

  What did I miss?

  When you compile your SWF application, use the - resource-bundle-option list indicating something like - resources-bundle-list = C:\bundles.txt. The compiler must write to this file the names of all the bundles of resources that your application uses.

  Then add all these names together in the - include-resource-bundles option when you compile your modules of resources, so that your resource modules have not only your own resources, but also the resources required by classes in the framework that your application uses. Use a comma-separated list as - include-resource-bundles = resources, core, the container controls. Specify additional source paths so that it can find the .properties files for these packages, which are located in directories such as frameworks/projects/framework/bundles/en_US, frameworks/projects/mx/bundles/en_US, frameworks/projects/candle/bundles/en_US. You can use {local} instead of the actual location, as in frameworks/projects/framework/bundles / {local}.

  If this does not resolve the problem, I'm afraid I'm out of ideas.

  Gordon Smith

  Adobe Flex SDK team

• Suddenly cannot send mail. Message 4.7.1: Recipient address rejected: rejection policy - your host has been blacklisted for e-mail abuse.

  When I try to send a message an error box apperars:

  An error occurred while sending mail. The mail server responded:
  4.7.1 < ***@***.com >: recipient address rejected: rejection policy - your host has been blacklisted for e-mail abuse. Please configure your email client to use authentication SASL - contact support if in doubt how...

  Please check the message recipient "*********@******.com" and try again.
  

  This happened while I was sending about #3 4 or 5 that I must send. Nothing I know has been changed has been changed! I have downloaded the latest version while I was in the program.

  This seems to be a message from a server. The word 'host' is not clear to me. In the language of networking, it can mean your own computer, but more generally, it could mean your ISP provider or by e-mail.

  Anyway, this means that something has decided that you are, or are on a network that has been identified as a source of spam. I suggest that ask you this from your ISP.

• Thunderbird 38.2.0 does not check for incoming mail, freezing

  I used Thunderbird for years without problem. Update 38.2.0 was so bad for me that I had to uninstall it. Questions:

  (1) would not check for incoming mail
  (2) popped up the windows of information that had no text and even not closing "x" in the corner (although I could click the right superior whiteness and she closed)
  (3) screen would freeze. At least the closing 'x' still - working but it's the only thing that makes.

  Every update I've ever had until this has been perfectly integrated. This one was painful.

  My question is when there's an update to correct these problems?

  Please update to version 38.3.0 which came out today. Will probably solve your problem.

  Is this better?

• Where Firefox does not user name for the mail from Verizon?

  I use Verizon email with Firefox. The user ID
  for verizon email is email address. However,.
  If you type in something other than error
  the correct user in the box, the computer ID
  dutifully she remembers as well as good
  one! Where Firefox saves these nicks
  for Verizon Mail so that I can kill incorrect
  ones?

  Almost. You need to highlite the problem entry
  then hold DOWN the SHIFT key, and then
  Press delete. I found this answer which
  work by searching the Web led me
  Return to this site. The original question posted
  has been a little words than mine.

  Thank you
  SgrB2

• AT300 - need driver USB to develop an application for Android

  Hello

  I'm a new Tablet AT300.
  I'm developing an application for Android in Eclipse.

  I want to debug on it but I need a usb driver as explained here:
  http://developer.Android.com/tools/Extras/OEM-USB.html

  But I found Toshiba on other tablets like the Archos, I use to download on their website.
  Could you tell me where I can find the driver.

  Kind regards

  VPM

  If you are making reference to the use of 'Android Debigging Mode' that light, then using the standard driver of Google in the Android SDK should work.

  But with that you need to add the device ID in the INF for her.

• Can you set up a 'holiday auto response' for Apple mail

  Is it possible to set up a release of the response of the Office for Apple Mail for a MacBook Air

  Yes.  Create a rule in Mail.

  Address postal (El Capitan): use rules to manage your Inbox

• How can I tell the mail client to search for new mail on the server?

  How can I tell the mail client to search for new mail on the server?

  Within the Mail app and display the Inbox you can pull down on the list of e-mail using your finger and you should see a small reel spinning gear. Which indicates that his check new email.

  You can also go into the settings of e-mail and calendars Contacts and view the settings there. Examine the settings of "search for new data. If the Push is enabled, then messages will be pushed to you if the email provider supports this feature. You can also set your accounts to use Fetch and set the frequency, he's going to go out and look for new e-mail messages.

• LV TEN F5 SP1 does not appear in the components for deployment...

  Hello

  Just migrated my x 32 to x 64 TS2014 TS2013 LV2013 & apron & LV 2013 x 64. I'm now trying to build a new installer for deployment for my test stations, but LV RTE SP1 F5 does not appear in the components for deployment, even if it is properly used as adapter labview Teststand sequence editor... why?

  I can see RTE SP1 F3, but not F5...

  If please see attached picture to see my setup teststand (showing the labview adapter) and the list of parts available in the deployment utility.

  Thank you very much for the help.

  C.

  Hello

  Thank you for the information.

  As a temporary solution (as of 2014-12-04), I manually installed the SP1 LV F5 RTE 2013 on the test station.

  Here you can find the downloadable version:

  http://www.NI.com/download/LabVIEW-run-time-engine-2013-SP1/4539/en/

  Thank you and have a great day,

  C.

• Is there a forum for Windows Mail - if not where can I get answers from?

  Is there a forum for Windows Mail - if not where can I get answers from?

  E-mail address is removed from the privacy *.

  Hello

  Yes.

  For Windows Mail in Vista, please use:

  http://answers.microsoft.com/en-us/windows/forum/windows_vista-ecoms/ .

  For Windows Mail in Windows 8 application please use:

  http://answers.microsoft.com/en-us/windows/forum/windows_8-ecoms/ .

  (select Mail app for the Category of App Store Windows when you ask the question)

  For the purposes of Windows Mail in Windows RT please use:

  http://answers.microsoft.com/en-us/windows/forum/windows_rt-ecoms/ .

  (select Mail app for the Category of App Store Windows when you ask the question)

  For Windows Live Mail please use:

  http://answers.microsoft.com/en-us/windowslive/forum/livemail/ .

  Hope that helps.

  P.S. Find it the appropriate forum for questions by email is not easy to say here... :)