Development of the Dreamweaver API

Similar Questions

• How to use the vStorage API?

  Hi all

  I heard that vStorage is a feature of vSphere 4.0 that can take backup of the virtual machine directly without using a Proxy VCB.

  Does someone know how to use it? as far as I know only commercial 3rd party backup software can use it, do not use any script solution or freeware.

  Kind regards

  AWT

  I've heard both sides of the story (even from VMware peeps)

  (1) vStorage API is today essentially vSphere API + VDDK (e.g. change block tracking feature is in the new vSphere API, accessible using the SDK)

  (2) vStorage API is reserved for VMware partners to develop 3rd party applications (not 100% sure on this subject, but I know that some people have said this)

  Probably best to contact your VMware representative if you have any questions or interest in development on the vStorage API (probably why there not a forum on the vStorage API developers forum)

  =========================================================================

  William Lam

  VMware vExpert 2009

  Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/

  repository scripts vGhetto

  VMware Code Central - Scripts/code samples for developers and administrators

  150 VMware developer

  Introduction to the vMA (tips/tricks)

  Getting started with vSphere SDK for Perl

  Twitter: @lamw

  If you find this information useful, please give points to "correct" or "useful".

• WARNING: Type "SByte" is not available in the public API. Development of Onyx?

  Hello, I get the WARNING WARNING: Type "SByte" is not available in the public API.

  and various other warnings. The problem is that I see no code.

  Any thoughts? BTW is onyx under development?

  PS: I know nobody will answer so I wonder why I keep asking.

  The vSphere client employs some hidden APIs. If you perform an action in the vSphere client that uses a hidden API, Onyx will report the "warning: Type 'xxx' is not available in API public." message. Unfortunately, this limits what you can do with PowerCLI. Some know hidden API are tags, mode of EVC cluster and storage profiles.

  I don't know if the Onyx is still under development. Maybe some of VMware can answer this question?

• Research of interface software for FlexRIOs using API c do I need LabVIEW once I use the C API generator?

  Current versions of software:

  LabVIEW 2014 SP1

  LabVIEW FPGA 2014

  Xilinx Vivado

  Hi all

  I plan to interface my FlexRIOs to the software programmed in C, then the C API FlexRIO is excellent.

  My question is more economy of memory sake.

  I have a PC with Visual Studio, I want to add the minimum amount of software development.

  If I have a station (a separate Visual Studio PC PC) FPGA development with all LabVIEW software necessary to take the step of the use of the generator of the C API to create the necessary files of C and H, should what software I on the development PC Visual Studio in interface with the files in the generated C API?

  If all goes well, it's just (from the help)

  What you need to get started

  • Drivers for devices OR RIO August 2013 or later

  However... The help of the C API, it gives me the full list of the software including LabVIEW and LabVIEW FPGA... (below)

  What you need to get started

  In addition to a RIO device like a CompactRIO reconfigurable chassis, a Single-Board RIO device or RIO PCI or PXI hardware, you need the following software to use FPGA Interface C API.

  • LabVIEW 2009 SP1 or later (32-bit only)
  • LabVIEW FPGA Module 2009 SP1 or later (32-bit only)
  • Drivers for devices OR RIO August 2013 or later
  • Operating system supported development
    • Windows 8 or 8.1 (32-bit or 64-bit)
    • Windows 7 Professional (32-bit or 64-bit)
    • Windows Vista Business (32-bit or 64-bit version)
    • Windows XP Professional SP2
    • Windows Server 2008 R2 (64-bit version)
    • Windows Server 2003 (64-bit version)
  • Target supported OS
  • Supported C/C++ compiler

  So I have LabVIEW and LabVIEW FPGA on the development PC?

  (If all goes well no....)

  Thank you

  Hey Colonel1013,

  With the C API, you only need LabVIEW to build a bitfile and run the generator of C API tool, but LabVIEW is not required to run. That is, you need all the software listed, but it must not all be on the same machine. You can transfer the file lvbitx and the .c and .h files generated on another machine where you need only NOR-RIO and Visual Studio installed.

  Sebastian

• Version of the C API for LabVIEW FPGA 2011

  What is the version of the C API that will work with LabVIEW FPGA 2011?

  I guess as this one: http://www.ni.com/download/fpga-interface-c-api-2.0/2616/en/

  Version numbers seem to start by 2012 years.  It's the latest version I could find before 2012 and he was released in August 2011.  This time coincides with the annual festivities of the NOR week where a large part of the software/hardware is released.  It's a small download, so it shouldn't be difficult to download it and try it.

  But, you'll still need LabVIEW FPGA development according to this white paper: http://www.ni.com/white-paper/9036/en/

• Ask about the ReadConsoleW API

  Hello, I have a cople of applications below concerning the API ReadConsoleW:
  (1) I use the ReadConsoleW API to read all the console buffer both its working fine in all windows except Windows 2000 and Windows XP 64-bit OS.

  (2) and if I use the ReadConsoleW API to read the console buffer of a character at the same time, the problem is its fine if I give input keyboard, but when I copy and paste my couple of lines of text to console am adding an extra character of work ' at the beginning of each new line. find the code example below.

  uint dummy_errors;
  u16buf static wchar_t [MAX_CONSOLE_LINE_SIZE + 1], * pos;
  size_t mblen = 0;
  DWORD console_mode;
  DWORD nchars;
  Console handle = GetStdHandle (STD_INPUT_HANDLE);
  (Mbbufsize > 0) DBUG_ASSERT; / * Need space to the coarser '\0 ' * /.

  GetConsoleMode (console, & console_mode);
  SetConsoleMode (console, ENABLE_LINE_INPUT |) ENABLE_PROCESSED_INPUT | ENABLE_ECHO_INPUT);

  for (pos = u16buf; pos)< &u16buf[max_console_line_size]="" ;="">
  {

  DWORD nchars;
  If (!.) ReadConsoleW (console, pos, 1, & nchars, NULL). nChars == 0)
  {SetConsoleMode (console, console_mode);      return null;    }
  If (* pos == L '\r') / * do not '\r' in the resulting string, pop it * /.
  continue;
  If (* pos == L '\n')
  break;
  PDS ++;
  }

  You will need to create a new post on the MSDN forums for assistance to development and programming:
  http://social.msdn.Microsoft.com/forums/en-us/vcgeneral/threads

• How to use the 'sensors' api?

  Hi guys! I am a web-game developer but a beginner in developing blackberry applications.

  I intended to create a star atlas application and I've already finished most but failed to use the 'sensors' api.

  I referred to the example provided in the documentation of webworks 2.1 as below:

  function compassCallback(data) {
  document.write("Current azimuth:"+data.azimuth);
  }
  blackberry.sensors.setOptions("devicecompass", { delay: 1000 });
  document.addEventListener("devicecompass", compassCallback);
  

  and I added an element in the config.xml file:

  also, I added the plugin com.blackberry.sensors for the project.

  But I still can't azimuth compass...

  I really appreciate if someone could help me with this!

  I solved this problem by myself.

  The listener of the api should be placed in a "deviceready" event

• Environment and development of the file:///accounts/1000/shared/... Access

  Hey guys;

  I'm trying to create a folder (photo album) and then to store images in this folder.

  In the development environment, it seems (I could be wrong) that I cannot write directly to the file:///accounts/1000/shared/camera folder to create a subfolder, but am limited to the access development environment (file:///accounts/1000/appdata/appname.debug.testDevrecords

  Is this the case?  The paths change when I publish the mode?

  She stood in my development.  I am making the album to take a picture, then the picture in the album created.  I am trying to use the actionscript codethen see the photo but I don't seem to have access to the location where I created the image.

  Any ideas out there.

  Thanks for any help.

  Check out this post for information on access to the shared area via the AIR APIs, note however that some of the debates made refers to the old limits from the beginning of the SDK which no longer apply.  The basic idea of the file. applies.

• Some questions on development on the Blackberry Pearl 8110?

  Hello. I have a few questions about the development of java applications on this unit.

  Well, asumming my old pearl supports Java...

  I have the Eclipse plugin for java installed using the 5.0.0 jre so I think this means that the application works on OS5 and above all, Yes?

  Not sure what OS this old Pearl works (I personally don't think it runs OS5?), and if he ran to an older operating system (say OS 4 or less) then my developed apps still work on this unit?

  Sorry if these are stupid questions.

  Thank you

  "applications developed in the usual Blackberry JRE 5.0.0 run on machines running less than 5.0.0 OS?"

  It is more accurate to say - are not supported on.

  A few apps, when compiled using the API calls that have not been changed, will work on 'low' operating systems, at least a number of people on the forum (yourself included) have told me they have managed this.  However, I tried it by accident (when I plugged the wrong device to load an application) and a device in brick.  So I wouldn't recommend it, even if it does not work.

  "do you mean that if I develop my app in JDE, it works on any device blackberry hosting any level of the operating system?"

  JDE versions have the same restrictions - there are versions JDE as there are JRE versions.  I think JDE 4.2.1 and JDE 4.3 are always available, so if you want to develop is a phone which works 4.3, because I think that yours, you could use the JDE-, but it should have the JDE 4.3 or earlier.

  You can also upgrade your phone and use Eclipse (which is what I would do).

  Clear now?

• problem using the FileConnection API (JSR 75) in an application for Blackberry "BOLD" MIDLET

  Hello

  I developed a MIDLET which is to read files and store the contents of files in arrays. I could make using the FileConnection API in J2ME (Java ME) and it works very well in mobile emulators provided by Sun, Sun Kit tool 2.5.1 wireless and Sprint Wireless tool 3.3.2 Kit. I have been using netbeans IDE 6.8 for this.

  Now, here's the deal. Playback of the files does not work when in one of the Blackberry mobile emulators. I tried to install all versions of Blackberry JDE 4.2.1 to 5.0 and test the same thing, but none of them worked.  After reading that the Blackberry plugin for Eclipse is good, I used it to find that I am always faced with the problem.

  I desperately need help. Can someone help me do the reading work file in a Blackberry emulator? I insert the code that makes the file reading. It reads a file containing a single column of 60 entries, and stores it in an array of double type.

  Vector time = new Vector();
  
  try{
  
   FileConnection filecon = (FileConnection) Connector.open("file:///" +"SDCard/BlackBerry/documents/"+"timescale.dat");
  
   if(!filecon.exists()) {    Dialog.show("Note ! ", "File doesn't exists !", "okay","cancel"); }
  
       StringBuffer sb = new StringBuffer();      try      {       InputStream in = filecon.openInputStream();       int chars;
  
         while ((chars = in.read()) != -1)// read until EOF is reached       {          if(chars == '\n') // read all characters until the end of line is reached          {              time.addElement(sb.toString().trim()); // stores all the characters as a vector element when the end of line is reached
  
                sb.delete(0,sb.length());// clear the stringbuffer for storing the next line of the file
  
            }
  
            else          {              sb.append((char)chars); // appends each character read          }
  
        }// end of while
  
      }    catch(IOException e)    {               }
  
      filecon.close();
  
  }// end of outer try
  
     int i =0;   Enumeration etime = time.elements();
  
     while(etime.hasMoreElements() && i < 60) // timescale.dat has 60 entries in one column   {       time_1d[i]=Double.parseDouble(etime.nextElement().toString());// convert to double       i++;   }
  

  Can you elaborate on what does not work?  Is an error or exception thrown?  If Yes, what is it and what line of code triggers it?

  You have configured the BlackBerry smartphone Simulator to simulate a micro SD card?

  Use a computer filesystem in the form of microSD card

  http://supportforums.BlackBerry.com/T5/testing-and-deployment/use-a-computer-file-system-as-a-microS...

• Can I use the public APIs of BlackBerry for automation of the tests on the Simulator?

  Hello

  I'm developing a framework of automation with BlackBerry API public.

  Is it possible to test it against the custom application and 'Core BlackBerry Applications,' for example, mail, calendar...?

  With the help of API net.rim.device.api.ui.Keypad. * can manipulate the keyboard on a simulator, is that correct?

  Thank you!

  You can use the EventInjector API for input (keyboard, trackpad and touchscreen) events Simulator to interact with built-in applications.  It will work in the Simulator and the real device.

  If you are looking just to automate something in the Simulator, you can use the BlackBerry Simulator controller.  It is a command-line tool that enables script steps in the Simulator.  For more information look in the help on the BlackBerry smartphone Simulator menu.

• Application module tries to access the secure API

  Hi all.

  We are new to Blackberry Java development and have some problems with it.

  We use the same BlackBerry Bold 9000 and OS worm Simulator. 5.0 in Eclipse JDE.

  The JDE version is 5.0.0

  We signed HelloWorldDemo with tool of power, provided by BB. It worked fine on the Simulator AND the device.

  Then we signed our own application, based on PictureScrollFieldDemo.

  The thing is, on the simulator of OUR application works fine, but when we try to run on the device, it failed with an error that says something like this: "Application module tries to access the secure API."

  After that many times we tried to remove the code all potentially dangerous and recompile the application. After that it stopped working at all (when you click on the application menu, ABSOLUTELY nothing happens).

  Then, we decided to try to launch PictureScrollFieldDemo, the sample provided by BlackBerry. Also, it did not work

  Finally, the HelloWorldDemo has stopped working or the other...

  During all this madness, we rebooted the unit several times.

  Please help, appreciate any advice.

  Thanks in advance, geezmo.

  You should have received 3 keys, RBB, CPR and RRT. You imported all 3 when you have been setting up the signature tool?

• How to send e-mails using the RIM api.

  Hi all

  My requriement, it's that I need to develop an application to send e-mail using only the RIM api. Please help me by sending an email using the RIM api. I use version 4.7.0.41 JDE

  Through this Developer's Guide, Section, 'Integrate Messages'.

  http://NA.BlackBerry.com/eng/deliverables/608/BlackBerry_Application_Developer_Guide_Volume_2.PDF

• Question so that the migration of the VM using the vSphere API

  Hello

  I am having some problems during the migration of a virtual machine using vSphere SDK.

  I have install the vSphere environment as there are two hosts esxi installed on different physical machines with multiple virtual machines above them.

  Now I want to migrate one say the virtual macines VM1 fron host1 to host2. I did it via vCenter uses the vSphere client and it worked fine. Now, I have to perform the same task using the vSphere API. For this I use the template of "VMotion" located in the com/vmware/vm directory. I run the command as follows:

  targethost $ run.bat url username password, shows targetpool

  I'm not sure of the targetpool argument and I need advice on what I need to specify a name of pool of resources here. Acorrding to:

  http://www.VMware.com/support/developer/VC-SDK/visdk400pubs/ReferenceGuide/Vim.virtualmachine.html#migrate

  If the pool parameter remains disabled, current pool of the virtual machine is used as target the pool. I tried specifying the pool of resources such as:

  [- targetpool]

  but it gives the error:

  Error: List of resources target not found.

  Looking forward to all the advice. Thank you.

  Even if you do not have resource pools, it is actually a 'root' list of resources"which will be still exists. Try to specify 'Resources' as the name of the targetpool and allow you to migrate your VM.

• How do to identify the documents called "models of library" using the RESTful API?

  How do to identify the documents called "models of library" using the RESTful API? Furthermore, what constitutes a document to be a "model of library"? I see nothing in the libraryDocuments RESTful documentation that describes this type of document, such as presented on the tab 'Manage' my developer account. Please see the screenshot below. There is a model of Document named "[DEMO ONLY] Test model" listed under "Library Templates" and I try to figure out which classifies that document to be included this way and how does produce a similar announcement by using the RESTful API.

  

  Thank you!

  Hello

  You can connect to access library models using the REST API, use 'GET /libraryDocuments' allowing to recover documents in library for a user. Models are created in the account of EchoSign, which later are accessible via the REST method mentioned above.

  Jat